Print Scale Percentage - Can the percentage go more than 2 decimal places??

Hello All,
Illustrator CS6
I want to know if it is possible to get more than 2 decimal places in the Print Scale Percentage option box (as shown below)?
It seems to round to 2 and I would like to get at least 3 for better accuracy.
Any thoughts?
Thanks
Geoff

Not that I know of. If you need it to be more exact, resize the artboard and scale the content. It's an arguable point, anyway, given how your printer will translate/ rasterize the stuff. Even if there were more digits, the result after the halfftoning might not at all be any different...
Mylenium

Similar Messages

Qty with more than 3 decimal places in BOM

HI ALL,
CAN I PUT QTY IN BOM WITH MORE THAN 3 DECIMAL PLACES ITS VERY URGENT REQUIREMENT.
THANKS
R SEHGAL

Dear Rakesh
I am not sure, but you can try this
1. Define one more UOM for example 4dec then in MM02 give the conversion of 4dec to your 3 decimal, give conversion in it. for eg 10*3dec = 4 dec
2. Now when you define bom enter quantity in 3dec(i,e, multiplying by 10) and then convert the uom in BOM to 4dec
You can try and let us know your feedback
Regards
Jitesh

"value cannot have more than 0 decimal places" error

CRM gurus,
Whenever I try to create a Counter, I receive the following warning which doesn't allow me to do anything further..
"value cannot have more than 0 decimal places"
I first received this when I tried to assign a counter to a product in an Installed Base. So when I tried creating a counter here, I got the above message. I then tried to assign a counter to the product in the product master data, and I still received the same error message. I then tried creating a counter from the "Maintain Counter" screen (Transaction Code: crm_mpk_admin), and still received the same error message.
In this effort I created my own custom Counter Category, and Attributes. Nothing helped.
Could someone throw some light on this concept and tell me where am I going wrong.
Thanks and regards,
-Pras

Hi
I think its a program error, you need to Implement the source code corrections.
Please refer SAP Note : 855670
Regards,
Johnny.
Reward if it helps.

Query to find records with more than 2 decimal places

I have written the below query to find records with more than 2 decimal places, but it is returning records with decimal places 1 & 2.
The datatype of the AMT column is NUMBER (without any precision).
SELECT amt FROM amount_table
WHERE substr(amt, instr(amt, '.')) LIKE '.%'
       AND length(substr(amt, instr(amt, '.') + 1)) > 2Output:-
AMT
*41591.1*
*275684.82*
*64491.59*
*3320.01*
*6273.68*
*27814.18*
*30326.79*
131.8413635
162.5352898
208.5203816
8863.314632
22551.27856
74.716992
890.0158441
2622.299682
831.6683841
*1743.14*
2328.195877
3132.453438
5159.827334
3.236234727
37.784
Thanks

Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
create table amount_table
LINE_NUMBER        NUMBER not null,
FEE_AMT            NUMBER not null
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (60208, 41591.1);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (60213, 275684.82);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (60238, 64491.59);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (63026, 3320.01);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (59906, 6273.68);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (83111, 27814.18);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (83114, 30326.79);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112395, 131.8413634682);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112399, 162.5352898104);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112402, 208.5203815738);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112403, 8863.3146321954);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112406, 22551.2785551322);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112407, 74.716992);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112410, 890.015844079);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112411, 2622.2996817048);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112414, 831.6683840698);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112415, 1743.14);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112418, 2328.1958771886);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112419, 3132.4534379886);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112422, 5159.8273341686);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112423, 3.2362347266);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112426, 37.784);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112427, 198.7423503696);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112430, 0.7220848332);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112433, 12.4149375254);

Save data with more than 6 decimal places in SAP MDM 5.5

Hi there,
I need some help concerning saving data with about 20 decimal places (e.g. 0,00452961328622164) in MDM. I declared the datatyp "REAL", there are only 6 decimal places possible.
How can I save this Data? Maybe exponential function?
Please help.
Thank you
Thomas Pfab

currency takes you to 14 decimal places, if you want to have it as a little work around....you can always take out that symbol if it is annoying.(ohhh and decimal is multilingual too in currency, probably not a good hack!)
or without even knwoing what your requirement is? try normalizing the value, How many more decimal places can you hit?
One 100 1. "ten to the zero"
tenth 10-1 0.1 "ten to the minus one"
hundredth 10-2 0.01. "ten to the minus two"
thousandth 10-3 0.001. "ten to the minus three"
ten thousand 10-4 0.0001. "ten to the minus four"
hundred thousandth 10-5 0.00001. "ten to the minus five"
millionth 10-6 0.000001 "ten to the minus six"
ten millionth 10-7 0.0000001. "ten to the minus seven"
hundred millionth 10-8 0.00000001. "ten to the minus eight"
billionth 10-9 0.000000001. "ten to the minus nine"
ten billionth 10-10 0.0000000001. "ten to the minus ten"
hundred billionth 10-11 0.00000000001. "ten to the minus eleven"
trillionth 10-12 0.000000000001 "ten to the minus twelve"
ten trillionth 10-13 0.0000000000001. "ten to the minus thirteen"
hundred trillionth 10-14 0.00000000000001. "ten to the minus fourteen"
and put that field label indicating the 10th power. Like "Accuracy in 10 POW -9"
Just a wild guess.well thats how we usually show data in catalogues too!
(or)
separate the integer and decimal portions into two fields and store it in the repository.(split on ',')
-Sudhir.

Number with more than 10 decimal places display as 0 in report

We have a number stored on a table as this long with several decimal values.
2440.159999999999854480847716331481933593
On one PC it display in a Crystal report as 0 and to another user it displays at the 2440. The report formats the display field with 0 decimal places.
Is there a max precision setting at the database level that is causing this?
It seems I can add an SQL express as follows:
Round ("ORDER_RELEASE"."TOTAL_WEIGHT", 2) to resolve the issue but cannot determine could be causing the differences in display among two different client PCs running the same report.

Hello,
CR was built using C++ and therefore the max number is 15 digits plus 1 for the sign of the number.
Cause could be different runtime of MS C++ but hard to say for sure. I any event the only work around is to use Store Procedure and break the field into 2 parts. The in CR add a text object and drop the fields into it next to each other. For doing any calculations on them you'll also have to do that in the SP or handle each field manually.
Thank you
Don

How can the ALV display more than 100 chars?

Hi,
I'm developing a ALV using ABAP Object, my problem is that I need that the ALV shows unless 1024 chars but it only shows 100.
I have the followind code to create the container and the ALV grid:
    CREATE OBJECT v_o_container
      EXPORTING
         container_name              = c_container
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    CREATE OBJECT v_o_alvgrid
      EXPORTING
        i_parent          = v_o_container
      EXCEPTIONS
        error_cntl_create = 1
        error_cntl_init   = 2
        error_cntl_link   = 3
        error_dp_create   = 4
        OTHERS            = 5.
    CALL METHOD v_o_alvgrid->set_table_for_first_display
      EXPORTING
        i_structure_name              = c_structure
        is_layout                     = x_layout
      CHANGING
        it_outtab                     = i_alv_data
        it_fieldcatalog               = i_catalog
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4.
Could anyone, please, tell me if I need anymore to show more char?
Thank you very much.

DATA: BEGIN OF i_alv_data OCCURS 0,
    pernr         LIKE p0001-pernr,   "personnel number
    icnum         LIKE p0185-icnum,   "personal ID
    vorna         LIKE p0002-vorna,   "First name
    nachn         LIKE p0002-nachn,   "Last name
    sachn         LIKE t526-sachn,    "PersAdmin
    sachn2        LIKE t526-sachn,    "Business Partner G
    text_persg    LIKE t501t-ptext,   "Employee group
    text_persk    LIKE t503t-ptext,   "Employee subgroup
    stext2        LIKE hrp1000-stext, "position
    stext1        LIKE hrp1000-stext, "department
    text_werks    LIKE t500p-name1,   "Location
    text_trfgb    LIKE t510g-tgbtx,   "PS type
    trfgr         LIKE p0008-trfgr,   "diageo band
    trfst         LIKE p0008-trfst,   "Local grade
    lm_name       LIKE p0001-ename,   "line manager name
    datfr         LIKE sy-datum,      "Validity from
    datto         LIKE sy-datum,      "Validity to
    comp_stat     LIKE dd07t-ddtext, "Completion Status
    mobilitx      TYPE string,        "mobility text
    cab_continue TYPE string,        "My Capab.and
    cab_start     TYPE string,        "My Capab.and Be
    nco1          TYPE string,        "Posib next car op
    nco2          TYPE string,        "Posi next car opt
    nco3          TYPE string,        "Pos next carop
    timing3       LIKE i_hap_t_body_cells-value_text,
    epcm          TYPE string,        "Employee Commitme
    mpcm          TYPE string,        "Manager commitmen
   END OF i_alv_data.

Unable to view image if the size is more than 3KB using XML Publisher.

Hello,
We are printing PO approver signature using xml publisher (rtf) on a pdf.
If the size of the image is 3KB or less, the image gets printed.
But, if the size is more than 3KB the image does not get printed.
Additional Info:
1. The signature is stored as jpg image in fnd_lobs table.
2. On following code is mentioned in the rtf
<fo:instream-foreign-object content-type="image/jpg">
<xsl:value-of select="IMG_SIGNATURE"/>
</fo:instream-foreign-object>
3. We are using the following function that converts BLOB to CLOB.
CREATE OR REPLACE FUNCTION XX_BLOBTOBASE64
b IN BLOB
RETURN CLOB
IS
sizeb PLS_INTEGER := 4080 ;
buffer RAW(4080);
offset PLS_INTEGER DEFAULT 1;
RESULT CLOB;
BEGIN
-- dbms_lob.createtemporary
-- lob_loc => RESULT
-- , cache => FALSE
-- , dur => dbms_lob.CALL
-- LOOP
-- BEGIN
-- dbms_lob.READ
-- ( lob_loc => b
-- , amount => sizeb
-- , offset => offset
-- , buffer => buffer
-- EXCEPTION
-- WHEN no_data_found
-- THEN
-- EXIT;
-- END;
-- offset := offset + sizeb;
-- dbms_lob.append
-- ( dest_lob => RESULT
-- , src_lob => to_clob(utl_raw.cast_to_varchar2(utl_encode.base64_encode(buffer)))
-- END LOOP;
DBMS_LOB.createtemporary(lob_loc => RESULT, CACHE => FALSE, dur => 0);
Wf_Mail_Util.EncodeBLOB ( b, RESULT );
RETURN RESULT;
END;
Requesting any of you to let us know if there is any method to resolve this issue.
Thanks,
Angelica.

Hi,
Are you using Outlook.com to send/receive emails? Based on my research, we can only add an image/ picture in your e-mail signature that’s Web based (picture that is available in existing websites or stored in an online storage). See:
http://answers.microsoft.com/en-us/outlook_com/forum/osettings-oemailset/add-logo-to-outlookcom-signature/4455facf-0926-42a6-aad7-756de662a865
Since this forum is for general questions and feedback related to Outlook desktop application, if you are using Outlook.com, I'd recommend you post your question in the Outlook.com forum:
http://answers.microsoft.com/en-us/outlook_com/forum?tab=Threads
The reason why we recommend posting appropriately is you will get the most
qualified pool
of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

More than 3 decimal in Bill of Material component quantity

I want to know whether we can use more than 3 decimals in quantities in Bill of Material. I heard that it was an issue in SAP but is that issue still exist in ECC 6.0.
Regards

Dear,
During maintaing the unit of measure in T-code CUNI we can define No. of decimal places to which rounding should be performed which specifies the number of decimal places to which this measurement unit should be rounded.
System will not allow more than 3 decimal places in satandard SAP.
You can use a larger base quantity of 100 or 1000 in the BOM header (instead of 1).
That would eliviate your issue with the 3 decimal places in the component quantity.
SAP always takes the base quantity into account during requirements calculation.
Hope clear to you.
Please refer this link,
[Decimal in Bill of Material|Re: Decimal Points in BOM]
Regards,
R.Brahmankar

I have a PC, Windows 7 x64. I installed a plug-in in Elements 13. I tried to installed another plug-in. It replaced the first plug-in . Can't I have more than one plug-in at a time??? If so, how?

I have a PC with Windows 7 x64. I have Elements 13. I installed a plug-in (Topaz) which appeared under the Filter Menu.
Then I tried to install my new Canon Printer software plug-in which put it under FILE > AUTOMATION TOOLS. However, when I tried to use TOPAZ under the FILTER MENU it was gone. In other words, the Canon printer plug-in replaced my Topaz plug-in. When I reinstalled the Topaz plug-in, it replaced the Canon Printer Plug-in.
QUESTION: Can't I have more than one plug-in installed in Photoshop Elements 13 at a time? So that the Canon printer plug-in is in AUTOMATION TOOLS, and the Topaz plug-in is under the FILTER menu?

Have a look at this thread.
http://discussions.apple.com/message.jspa?messageID=2369954#2369954
Before you try some of the suggestions bear in mind that your iPod is still under warranty.

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

My sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same computer so my stuff with save?

my sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same macbook so my stuff with save?

How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Can I back up more than one mac to the time machine:

Can I back up more than one Mac to a time machine? I have a laptop and a Mac Desktop computer can I back up both on the same Time machine

Absolutely.
However, quoting from ASC contributor Pondini's excellent Time Machine FAQ:
It is advisable, though, to partition an external disk that will be connected to your Macs into one volume for each Mac ...

How can you set up more than one device on iTunes. I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices.

How can you set up more than one device on iTunes? I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices. I have all my music/videos on iTunes on my mac book pro. Can you set up separate folders for each device and drop in what ever music/videos from the main iTunes library?

In itunes it is called syncing and you can choose exactly what content to sync to all devices and it can be different for all of them
How to sync

Print Scale Percentage - Can the percentage go more than 2 decimal places??

Similar Messages

Maybe you are looking for