Save data with more than 6 decimal places in SAP MDM 5.5

Hi there,
I need some help concerning saving data with about 20 decimal places (e.g. 0,00452961328622164) in MDM. I declared the datatyp "REAL", there are only 6 decimal places possible.
How can I save this Data? Maybe exponential function?
Please help.
Thank you
Thomas Pfab

currency takes you to 14 decimal places, if you want to have it as a little work around....you can always take out that symbol if it is annoying.(ohhh and decimal is multilingual too in currency, probably not a good hack!)
or without even knwoing what your requirement is? try normalizing the value, How many more decimal places can you hit?
One 100 1. "ten to the zero"
tenth 10-1 0.1 "ten to the minus one"
hundredth 10-2 0.01. "ten to the minus two"
thousandth 10-3 0.001. "ten to the minus three"
ten thousand 10-4 0.0001. "ten to the minus four"
hundred thousandth 10-5 0.00001. "ten to the minus five"
millionth 10-6 0.000001 "ten to the minus six"
ten millionth 10-7 0.0000001. "ten to the minus seven"
hundred millionth 10-8 0.00000001. "ten to the minus eight"
billionth 10-9 0.000000001. "ten to the minus nine"
ten billionth 10-10 0.0000000001. "ten to the minus ten"
hundred billionth 10-11 0.00000000001. "ten to the minus eleven"
trillionth 10-12 0.000000000001 "ten to the minus twelve"
ten trillionth 10-13 0.0000000000001. "ten to the minus thirteen"
hundred trillionth 10-14 0.00000000000001. "ten to the minus fourteen"
and put that field label indicating the 10th power. Like "Accuracy in 10 POW -9"
Just a wild guess.well thats how we usually show data in catalogues too!
(or)
separate the integer and decimal portions into two fields and store it in the repository.(split on ',')
-Sudhir.

Similar Messages

Get the data with more than one of the desired value

Hi,
I need to pull the records with more than one value of 'Other' on the delivery days fields.
The delivery fields are mon,tue,wed,thu,fri and sat that tells the where the item will be delivered. The value can be Home, Work, or Other.
Here is the Sample data:
cust_id: 123
item: newspaper
mon: Home
tue:Work
wed: Other
thu: Home
fri: Other
sat: Other
And here is my query so far.
select
cust_id,
item,
mon,
tue,
wed,
thu,
fri,
sat,
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1
else 0 end) as day_ctr
from customer
Could you please help me with the right formula I need to get this?
Thank you in advance..

First
DESC customer
Second
Can you explain what you are trying with
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1 else 0 end) as day_ctr
Third
Usually it's helpful a example of the result you want...
Perhaps you want this
select DECODE(mon,1,(select distinct mon from customer), 'OTHER') mon,
        DECODE(tue,1,(select distinct tue from customer), 'OTHER') tue,
        DECODE(wed,1,(select distinct wed from customer), 'OTHER') wed,
        DECODE(thu,1,(select distinct thu from customer), 'OTHER') thu,
        DECODE(fri,1,(select distinct fri from customer), 'OTHER') fri,
        DECODE(sat,1,(select distinct sat from customer), 'OTHER') sat from
select
COUNT(DISTINCT mon) mon,
COUNT(DISTINCT tue) tue,
COUNT(DISTINCT wed) wed,
COUNT(DISTINCT thu) thu,
COUNT(DISTINCT fri) fri,
COUNT(DISTINCT sat ) sat
from customer
)

Inserting data with more than 255 characters in to MSACCESS through JDBC

Hi All,
I have developed a product using servlets,JDBC,HTML.The backend is MS access database.
I have to provide an option for the user to key in more than 255 characters of data in the textarea & then store it in the access database.But i read that access ODBC driver has a limit of 255 characters.Is this correct.
I tried changing the Datatype of the field from text to Memo field in MS ACCESS.But when i insert the data using setString method of the PreparedStatement ,it's giving the following SQL exception:SQLException caught:[Microsoft][ODBC Microsoft Access Driver]String data, right truncated (null)
How do i let an user key in more than 255 characters.Can somebody help me on this please ASAP as this is a very crucial issue which i need to solve by tomorrow.
Thanks in Advance
GCR

hi rashmi,
HOw bout using CLOB facility to store such large strings?? try it.
Cheers,
-Jer

Get data with more than one table

hi Gurus,
I am from ABAP and now am doing Crystal reports...please bear with me if am silly.
in ABAP I have developed a report based on my select statement.
ex : **SELECT SINGLE * FROM cabn WHERE atnam EQ 'Z10_OPS_INC_REGION'.**
       CLEAR ausp_objek.
      CONCATENATE cciht_ihva-recn cciht_ihva-actn INTO ausp_objek.
      CLEAR ausp.
now i have value in ausp_objek based on this i gone to other table to get the ausp-atwrt
      SELECT DISTINCT atwrt FROM ausp
                            INTO CORRESPONDING FIELDS OF TABLE lt_ausp
                            WHERE objek EQ ausp_objek
                              AND atinn EQ cabn-atinn
so i have value in lt_ausp-atwrt which i wanted..
so in CRYSTAL How does this work???...i have linked the tables but it is not a direct value from single table...at this point how do we get the desired results...
hope am clear...
thank you,
pasala.

Hi Pasala,
Nothing silly about it... We have a forum called SAP integration Kit which is both familiar with ABAP and CR so I moved your post to that forum.
Try searching on the home page for this forum on "ABAP" and you'll find lots of examples and suggestions and of course others will help too.
Don

Qty with more than 3 decimal places in BOM

HI ALL,
CAN I PUT QTY IN BOM WITH MORE THAN 3 DECIMAL PLACES ITS VERY URGENT REQUIREMENT.
THANKS
R SEHGAL

Dear Rakesh
I am not sure, but you can try this
1. Define one more UOM for example 4dec then in MM02 give the conversion of 4dec to your 3 decimal, give conversion in it. for eg 10*3dec = 4 dec
2. Now when you define bom enter quantity in 3dec(i,e, multiplying by 10) and then convert the uom in BOM to 4dec
You can try and let us know your feedback
Regards
Jitesh

Query to find records with more than 2 decimal places

I have written the below query to find records with more than 2 decimal places, but it is returning records with decimal places 1 & 2.
The datatype of the AMT column is NUMBER (without any precision).
SELECT amt FROM amount_table
WHERE substr(amt, instr(amt, '.')) LIKE '.%'
       AND length(substr(amt, instr(amt, '.') + 1)) > 2Output:-
AMT
*41591.1*
*275684.82*
*64491.59*
*3320.01*
*6273.68*
*27814.18*
*30326.79*
131.8413635
162.5352898
208.5203816
8863.314632
22551.27856
74.716992
890.0158441
2622.299682
831.6683841
*1743.14*
2328.195877
3132.453438
5159.827334
3.236234727
37.784
Thanks

Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
create table amount_table
LINE_NUMBER        NUMBER not null,
FEE_AMT            NUMBER not null
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (60208, 41591.1);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (60213, 275684.82);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (60238, 64491.59);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (63026, 3320.01);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (59906, 6273.68);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (83111, 27814.18);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (83114, 30326.79);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112395, 131.8413634682);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112399, 162.5352898104);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112402, 208.5203815738);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112403, 8863.3146321954);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112406, 22551.2785551322);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112407, 74.716992);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112410, 890.015844079);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112411, 2622.2996817048);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112414, 831.6683840698);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112415, 1743.14);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112418, 2328.1958771886);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112419, 3132.4534379886);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112422, 5159.8273341686);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112423, 3.2362347266);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112426, 37.784);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112427, 198.7423503696);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112430, 0.7220848332);
insert into amount_table (LINE_NUMBER, FEE_AMT)
values (2112433, 12.4149375254);

Calendar said if I wanted to save entries for more than a month to click 'all events' in settings. Now all events except birthdays have disappeared! Have tried to reverse request with no luck. HELP!

Calendar message said if I wanted to save entries for more than a month I should go to settings and change to sync for 'all events'. I did this and all but repeating birthday entries disappeared. I have tried to reverse but nothing has reappeared. HELP!

Welcome to the discussions,
WHY does it claim to be 8G but my capacity now says its just 6.83
The size of you HD is calculated binary when it comes to use it, instead of decimal when companies want to advertise there products. 1 KB=1024Byte instead of 1000KB as advertised by the manufacturer. In your case this reduces the actual available space by the factor of 0.93 or approx. 7,4GB.
If you have an "other" section in your color bar showing the different types of data on your ipod, which is bigger than 500MB, this could be a sign of corrupt data caused by a sync that did not complete or copied damaged data. A restore will reduce the size to normal again.
Restoring: http://support.apple.com/kb/HT1414
If you restore your ipod, iTunes will install the newest firmware first and then add back your data and settings from your last backup if you choose to "restore from backup". Every backup is replaced by the following one, so make sure to include this folder in your backup routine in case you'll have to go back.
You can check the location and size of the backup folder for your ipod here:
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
copied from: About backups http://support.apple.com/kb/HT1766
Sorry, I can't answer your payment question, I have never used your kind of setup, maybe you can find something useful here: http://www.apple.com/support/itunes/

HT1040 Is there a way to place an order with more than one item at a time? For example I am going to make a few books and have them all shipped to me. Do I have to order and pay shipping for each one individually?

Is there a way to place an order with more than one item at a time? for example I am making a few books and having them all shipped to me. Do I have to order each one separately and pay shipping each time?

You have to order each book separately, if the books are different. Only multiple copies of the same book can be ordered in the same order, see here
Regards
Léonie

Create a logical column with more than one data source

I'm having a problem to create a logical column with more than one data source in Siebel 7.8.
What I want to do is the union of 2 physical tables in one logical table.
For example, I have a "local_clients" table and a "abroad_clients" table. What I want is to have a logical table "clients" with the client data from the 2 tables.
What I've tried is dragging the datasources I need onto the logical column.
However this isn't working because it only retrieves the data from the first data source.

Hi!
I think it is not possible to do this just by dragging the columns to the logical table. A logical table can have more than one source, but I think each column must have just one direct source column.
I'm not sure, but maybe you should do the UNION SQL to get the data of the two tables. In the physical layer, when you create a new physical table, it's possible to set the "table type" as a "SELECT". I didn't try that, but it seems that it's possible to have the union table in the physical layer.
Bye.
Message was edited by:
user578388

Read CAN Data message With more Than 64 bits

Dear All,
I'm working With CAN card PCI Series 2 with Labview 8.2.1 and Measurement and automation 5.1.
I'm making measures from an ECU.
This one (please see piture) is composed with more than 64 bits for one ID.
I don't found how I can read those Data using "Channel API". Is It possible ?
On MAX I am not able to creat CAN Task measure with more Than 64 bits...
It is necessary to use only "Frame API".
Thanks for repply.
Regards
Solved!
Go to Solution.
Attachments:
Transmition_Data _ECU_ A_50Hz.JPG ‏80 KB

NI-CAN Channel API is not able to deal with Multi frame messages, so you would need to use the NI-CAN Frame API to read the Multi frame message and do the conversion into physical values on your own.

I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use ' ' with more than one recipient the save grays out. Any thoughts?

am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use '< >' with more than one recipient the save grays out. Any thoughts?

I figured it out. I needed to fix some errors in my account information. It works fine now.

Anyone with more than one iPhone 6/6+ in same order getting there phones shipped if all your phones didn't have 9-19 when you ordered?

Our Verizon account has 10 lines and I figure we're paying over $7,000 a year, when I think of how much money total we have payed to Verizon only to be jerked around and around and lied too over and over again really does make me sick. 6 of these contracts have ended and 3 will be up in next couple months and 1 has a year left so the cancelation fees would not be that bad. And with the other big carrier I've heard it might be cheaper on monthly service. All I wanted from Verizon was for them to do whats right.
I Ordered
iPhone 6 16gb gray
iPhone 6+ 16gb gray
iPhone 6+ 64gb gray
iPhone 6+ 64gb silver
all on the same order. I finished at 3:19 am est and got a date of 10/14 even though all the phones except the 6+ 16 gb gray had 9/19. Got confirmation email at 4:56 will ship by 10/14 I got worried that all the phones would not ship till 10/14 and contacted verizon thru facebook messenger. They told me my phones would ship in the order received and not be held up by a phone that wasn't available in my order. And based on the time of my order she said 9/19 for the 6 and 6+ silver, 10/7 for the 6+ 64 gray , 10/14 for 6+ 16 gray. On Monday morning my status changed to 9/19:):) in the afternoon in changed to unknown. I called 611 and rep went thru all my phones with a time sheet she had and said i should get all but the 6+ 16 gray on 9/19, she said that one you had to order by 3:00 to get on 9/19. On Wednesday my status changed to 10/14 , called 611 again and this lady told me all my phones had 10/14 listed after them. She told me she didn't know what to tell me that Apple ships the phones and its out of Verizon's hands because they don't have the phones. then she told me to call Apple (and gave me the phone # ) and see if they ship preorders with more than 1 in a order when their available or wait till all are. I called them ( they laughed that Verizon had me call them) and they don't hold up orders . Called customer service back and guy said at least 10 times ....I ASSURE YOU VERIZON WILL NOT HOLD YOUR PHONES!!! i said of course they're not actually putting them in a box and waiting for all, they're sending them to other people who ordered after me. I asked him if my order could be separated/ rebuilt and do a (jump the line request) so i could get my phones when i should. He said there is no such thing at verizon....he has worked there many years and if there was he would know. Someone posted # to Internet orders so i called them Thursday morning, spoke to a very nice guy he said my phones that i should get i would and i should get an e-mail later that day and if i didnt get anything by 8:00 pm to call back. Before we hung up i asked if I didn't get anything did he know if they could cancel/separate/rebuild and do jump the line, he said they can do that and put me on hold while he spoke with a supervisor, he came back and said if nothing happened that day they would do that with my order. I got nothing, called Internet orders back at 8:30pm... went thru my history and asked them to do the rebuild. She transferred me to supervisor who REFUSED to rebuild my order, that is only for orders that have a technical error. She was also the first person from Verizon to tell me that they DO NOT ship orders in multiple shipments, they will only send when everything is available. She then said your order was given a delivery date of before 10/14 and that's when you'll get all your phones. I let her know that there is nothing about that confirmation that tells me that the phones that I ordered that had 9/19 deliver by dates would not be delivered then, 9/19 is before 10/14.

Same thing happened to me!!! They made a shady business move and they should be ashamed. Placed a pre-order for an Phone 6 and an iPhone 6 Plus at 2 AM on the 12th and got my pre-order in line just like everyone else did that morning. The 6 said delivery by 9/19 and the Plus was already back ordered to 10/7 but that's fine, I expected the Plus to be harder to get anyway. Being that both phones were eligible it made sense to just place one order given this hasn't been an issue in the past. However, Verizon moved my iPhone 6 pre-order delivery to coincide with the back ordered Plus so they don't have to ship each phone separately!!! I have to wait for something on backorder while the other is ready so they can save on shipping cost. I expected the one that I pre-ordered IN TIME FOR A 9/19 delivery and waited my turn "in (on)line" like everyone else I should get that when it told me that in the checkout, THEN send the Plus when it becomes available. I even have the confirmation email that says "Deliver by 9/19"!!! Every company you order from sends you the backorder item when it becomes in stock, they don't wait and hold the entire order for it. WHAT A BUNCH OF CRAP!!!

Generating excel with more than one tab

Hi,
I would like to ask if anyone of you know how to generate excel file from Oracle Reports with more than one tab? Is it possible? If yes, can you provide me some references on how to do it. Thanks in advance.

Hi,
Do this:
1. Create an Excel file, put some dummy data in 2 or more worksheets. Save as HTM. This will create one main HTM file, and some sub-files under a folder. One HTM sub-file will be created per worksheet. In addition, one XML sub-file (called filelist.xml) and some other sub-files will be created. (you have already done this)
2. Open one of the HTM sub-files in reports builder, and follow the steps shown in the Excel Demo on OTN to insert data in this file at appropriate place, and save as JSP.
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/excel/index.html
3. You can repeat this step for all worksheets. So finally you will get one JSP file per worksheet.
5. Now open the main file in reports builder, and add the Excel contentType element at the top
     <%@ page contentType="application/vnd.ms-excel; charset=windows-1252" %>
6. In this file, search for the following tag
     <x:WorksheetSource HRef="./filename_files/sheet001.htm"/>
Note that instead of filename_files you will have your own file name
Change this tag as following:
     <x:WorksheetSource HRef="./filename_files/sheet001.jsp?userid=scott/tiger@myDb"/>
Note that in userid, you must provide your own DB connect string
7. Additionally, change ALL references to sheet001.htm in this file to sheet001.jsp
Do steps 6 and 7 for sheet002.htm, sheet003.htm, and so on (if needed).
8. Open filelist.xml (you will find this file inside the folder that contains sub-files). Here, too, change all references to JSP instead of HTM
9. Now place the main JSP file as well as the folder containing all sub-files inside your J2EE deployment folder. Run the main JSP file. This will run the associated JSP files (the worksheets).
This will do the trick.
If you are worried about placing the USERID information inside your JSP code, then you can use CGICMD.DAT file, and place the userid there.
Navneet.

JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar

HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..

Report with more than 30 columns

XML Pub Gurus,
I have a requirement where I need to create a table layout with proper spacing for more than 30 columns and I asked this question in Open World XML Pub team and they responded to my question as "The page size in word has to be increased to allow to add those many columns". I was satisfied with the answer without knowing that Word will not allow more than 22" long in landscape. So, I am puzzled with the answer in Open World.
So, could somebody please give me guide lines to create this type of report for more than 30 Columns. This is very common requirement for us to report some of the stuff from the db.
Thanks in advance
Ram G

What do you want your final destination format to be? I'm thinking you'll probably want to go out to HTML or Excel. I would think that would be the only place where you could read and use a report with more than 30 columns.
Here's an idea if you want to go to excel and if you are using the 10.1.3.2 Enterprise (standalone) version.
1. Create your query with as many columns as you want.
2. Don't create a layout at all
3. Launch Excel Analyzer.
4. From within Excel, build your report based off the downloaded data (for example add a pivot table).
5. Upload your excel Analyzer template back to the server
This template can now be scheduled and delivered like normal templates or updated with current data directly from within Excel.

Save data with more than 6 decimal places in SAP MDM 5.5

Similar Messages

Maybe you are looking for