Print with header
Hi Guys,
I have problem with user requirement. Now we generate a
report 100 records in single long page. When we print it, it will
print to 5-10 page with no header except for the 1st page. Our user
need every page (when print) got header. But when view via the
system it will only display at 1 single long page. Can we do that
in coldfusion? Pls help me on this. Thanks in advance
Regards,
Shaffiq
Shaffic,
You can use <cfdocument> to create a PDF or Flash Paper
file.
http://livedocs.macromedia.com/coldfusion/7/htmldocs/wwhelp/wwhimpl/common/html/wwhelp.htm ?context=ColdFusion_Documentation&file=00001442.htm#118796
Or use this link instead:
http://tinyurl.com/lu83j
Ken Ford
Adobe Community Expert
"capik79" <[email protected]> wrote in
message
news:e7q9kt$928$[email protected]..
> Hi Guys,
>
> I have problem with user requirement. Now we generate a
report 100 records
> in
> single long page. When we print it, it will print to
5-10 page with no
> header
> except for the 1st page. Our user need every page (when
print) got header.
> But
> when view via the system it will only display at 1
single long page. Can
> we do
> that in coldfusion? Pls help me on this. Thanks in
advance
>
>
> Regards,
> Shaffiq
>
Similar Messages
-
Issue with printing of header text
hii frnds ,
my problem is i am getting the header text printed properly but the text is not getting displayed whenever the user enters a numeric value without any gaps ... i have seen while debuging that the text is properly getting fetched and the cursor is also passing through the text field but the text is not getting printed in my layout . i am using a script for this .
thanking you
rohit guptaUse Below code to get your text..
data: begin of int_rtline occurs 0.
include structure tline.
data: end of int_rtline.
data : rheat type string.
data : itab_r like swastrtab occurs 0 with header line.
Get the Heating and Cooking Instruction
get material heating instructions from material master
call function 'READ_TEXT'
EXPORTING
client = sy-mandt
id = 'IVER'
language = sy-langu
name = tdname
object = 'MATERIAL'
TABLES
lines = int_rtline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
others = 8.
loop at int_rtline.
if rheat = space.
concatenate 'COOKING INSTRUCTIONS: '
rheat int_rtline-tdline
into rheat.
else.
concatenate rheat int_rtline-tdline
into rheat separated by space.
endif.
endloop.
Depends on ur Layout Width for each line print number of charcter,here i mentioned 92 char.
IF NOT rheat IS INITIAL.
CALL FUNCTION 'SWA_STRING_SPLIT'
EXPORTING
input_string = rheat
max_component_length = 92
TABLES
string_components = itab_r
EXCEPTIONS
max_component_length_invalid = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
LOOP AT itab_r.
Print ur data.
Endloop.
Reward Points if it is helpful
Thanks
Seshu -
How can I add header on printing with Numbers
How can I add header on printing with Numbers? The previous version use to have it and I cannot find it in the new one ...
Hi Tanya,
Glad to hear that you found how to edit page headers and footers in Numbers 3.2. I agree that Help in Numbers 3 is woeful. No searchable PDF to download and use offline. All is online (one page at a time) and we need to know the terms we are looking for before we look.
The first HelpDesk:
http://www.youtube.com/watch?v=pQHX-SjgQvQ
For printing to paper where layout is important, I use Numbers '09 (Numbers 2.3) with its Print View. But it is orphanware. As the name suggests, there has not been a major overhaul since 2009. With that in mind, it is a useful version to hang onto while we hope and wait (and provide feedback to Apple) for something in future versions of Numbers 3.x to provide better layout capability.
Indeed, each new update of Numbers 3.x has restored more of the old features while adding new features that are enhancements over Numbers '09. Many of the Numbers 3 enhancements reflect long-awaited wishes through this forum, and were passed on by Numbers Feedback to Apple. So it seems that Apple does take heed of feedback.
In the meantime, I enjoy the charm of Numbers '09 whilst exploring the new features of Numbers 3.
What has been GAINED in Numbers 3 is here:
https://discussions.apple.com/thread/5473882?start=75&tstart=0
(Very long thread because it started with Numbers 3.0, and enhancements have continued through Numbers 3.2).
Hints on workarounds in Numbers 3 is here:
https://discussions.apple.com/message/23622372#23622372
Some workarounds are no longer needed, but what amazes me is how many Numbers '09 features (the so-called "lost" features) were not lost; the settings have simply been moved. Moreover, many features such as margin settings carry over with a Numbers '09 document or template into Numbers 3.
Hints for layout on screen before printing to paper:
Try Alignment Guides and Rulers as suggested here:
Print View workarounds
Use a layout guide:
Layout Guide for Numbers
Regards,
Ian. -
I have formatted a photo book, but am apprehensive to push the "buy" button as I have ordered prints that I thought were cropped correctly, and they returned with heads cut off and half of bodies mising. I have put the book on a PDF file as instucted, please reassure me that if everything looks right there, that is the way the book will look??
If the PDF looks good then the printed copy should be OK. The only problem you might run into is the color rendering. As long as none of your photos use the sRGB profile and not the Adobe RGB color profile the color should be fine.
On those prints that were cropped incorrectly: did you copy them to the print size ordered before uploading for printing? If not then they will be cropped by the printing equipment and you'll lose part of the top and bottom of the print (for landscape prints).
OT -
How to NOT display header details in every page when printed with PLD
Hi All
I am printing a report of all related activities of a business partner using PLD. in the printout the header details of business partner such as name, phone details are printing in every page along with contents. how to avoid this situation printing the header details in everypage except first page?
SV ReddyHi,
Add a formula field to the page header. The formula field will need to contain the following text on the Content tab.
CurrentPage()
Add another formula field, once again add the following to the Content tab
Field_101=='1'
in the example above, Field_101 is the field id for the first formula field you added.
Now all you need to do is link the fields that you only want printed on the 1st page to the 2nd formula field you added.
Regards,
Adrian -
just starting t-shirt printing business but having problem pairing printer to PC using adobe Photoshop 13 elements software
You will need to give more information.
Please define "having problem pairing printer to PC." -- Tell the whole story, what you are trying to do, and what happens instead ...
This sounds so far like it's a printer problem, not a Photoshop problem ... ? Have you tried printing with other applications? Does that work?
Have you checked your cables? Print drivers? Read the printer manual, etc. -- ? -
Printing the header of a report and checking the join statement...
Hi All,
This report of mne is working fine but there are things that i want to include: when i print this report i want it to display heading of which is in the html_top_of_page but it does not print it, i am not familiar with smart forms so i won't be able to use smart forms.If anyone can help me out i will really appreciated and will immediately reward points......please help me guys as the due date is very close...and please check the joins on the select statement, not sure whether i've joined the tables properly!
REPORT Z_ORDER_AUDIT_NEW.
TYPE-POOLS: SLIS.
LIST OF TABLES
Tables: vbak, likp, vbrk, kna1, vbrp, nast.
DEFINITION OF FIELDS *
DATA: itb_fieldcat TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
w_fieldcat TYPE slis_fieldcat_alv.
DATA: w_cnt LIKE sy-tabix.
DATA: lv_layout TYPE slis_layout_alv,
lv_tab_group TYPE slis_t_sp_group_alv,
lv_repid LIKE sy-repid,
lv_events TYPE slis_t_event,
lv_print TYPE slis_print_alv,
lv_user TYPE slis_formname VALUE 'USER_COMMAND'.
SELECTION SCREEN *
SELECT-OPTIONS:
s_lfdat FOR likp-lfdat,
s_imwrk FOR likp-imwrk.
DEFINITION OF AN INTERNAL TABLE *
DATA: Begin of i_ordertab occurs 0,
audat LIKE vbak-audat,
vbeln LIKE vbak-vbeln,
lfdat LIKE likp-lfdat,
erdat LIKE likp-erdat,
vbeln1 LIKE likp-vbeln,
vbeln2 LIKE vbrk-vbeln,
erdat1 LIKE vbrk-erdat,
kunrg LIKE vbrk-kunrg,
name1 LIKE kna1-name1,
regio LIKE vbrk-regio,
inco1 LIKE vbrk-inco1,
vrkme LIKE vbrp-vrkme,
ntgew LIKE vbrp-ntgew,
gewei LIKE vbrp-gewei,
volum LIKE vbrp-volum,
voleh LIKE vbrp-voleh,
netwr LIKE vbrk-netwr,
End of i_ordertab.
READ THE DATA *
SELECT vbakaudat vbakvbeln likplfdat likperdat likpvbeln vbrkvbeln
vbrkerdat vbrkkunrg kna1name1 vbrkregio vbrkinco1 vbrpvrkme
vbrpntgew vbrpgewei vbrpvolum vbrpvoleh vbrk~netwr
FROM likp join kna1 on likpkunnr EQ kna1kunnr
join vbrk on kna1kunnr EQ vbrkkunrg
join vbrp on vbrkvbeln EQ vbrpvbeln
join vbak on kna1kunnr EQ vbakkunnr
INTO i_ordertab
WHERE likp~lfdat IN s_lfdat
AND likp~imwrk IN s_imwrk.
APPEND i_ordertab.
ENDSELECT.
PERFORM STATEMENTS *
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM build_event.
PERFORM build_print.
PERFORM display_alv_report.
FORM build_fieldcatalog.
w_cnt = 1.
itb_fieldcat-fieldname = 'AUDAT'.
itb_fieldcat-seltext_m = 'Document date'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
itb_fieldcat-key = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'VBELN'.
itb_fieldcat-seltext_m = 'S/O number'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'LFDAT'.
itb_fieldcat-seltext_m = 'Deliv. date'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'ERDAT'.
itb_fieldcat-seltext_m = 'Del. Crt Date'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'VBELN1'.
itb_fieldcat-seltext_m = 'Delivery No.'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'VBELN2'.
itb_fieldcat-seltext_m = 'Invoice No.'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'ERDAT1'.
itb_fieldcat-seltext_m = 'Invoice Date'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'KUNRG'.
itb_fieldcat-seltext_m = 'Payer'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'NAME1'.
itb_fieldcat-seltext_m = 'Payer-Description'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'REGIO'.
itb_fieldcat-seltext_m = 'Region'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'INCO1'.
itb_fieldcat-seltext_m = 'Incoterms'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'VRKME'.
itb_fieldcat-seltext_m = 'Billed Quantity'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'NTGEW'.
itb_fieldcat-seltext_m = 'Net weight'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'GEWEI'.
itb_fieldcat-seltext_m = 'Weight Unit'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'VOLUM'.
itb_fieldcat-seltext_m = 'Volume'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'VOLEH'.
itb_fieldcat-seltext_m = 'VOLUME UNIT'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
w_cnt = w_cnt + 1.
itb_fieldcat-fieldname = 'NETWR'.
itb_fieldcat-seltext_m = 'Net Value'.
itb_fieldcat-col_pos = w_cnt.
itb_fieldcat-emphasize = 'X'.
itb_fieldcat-ref_tabname = 'VBRK' .
itb_fieldcat-ref_fieldname = 'NETWR' .
itb_fieldcat-do_sum = 'X' .
APPEND itb_fieldcat TO itb_fieldcat.
CLEAR itb_fieldcat.
ENDFORM.
FORM build_layout.
lv_layout-no_input = 'X'.
lv_layout-colwidth_optimize = 'X'.
lv_layout-totals_text = 'Totals'(201).
lv_layout-detail_popup = 'X'.
ENDFORM.
FORM build_event.
DATA i_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = lv_events[].
READ TABLE lv_events WITH KEY name = slis_ev_user_command
INTO i_event.
if sy-subrc = 0.
MOVE lv_user TO i_event-form.
APPEND i_event TO lv_events.
endif.
ENDFORM.
FORM build_print.
lv_print-reserve_lines = '2'.
lv_print-no_coverpage = 'X'.
ENDFORM.
*& FUNCTION ALV DISPLAY
FORM display_alv_report.
lv_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = lv_repid
I_CALLBACK_USER_COMMAND = slis_ev_user_command
I_CALLBACK_HTML_TOP_OF_PAGE = 'HTML_TOP_OF_PAGE' " see FORM
I_CALLBACK_HTML_END_OF_LIST = 'END_OF_LIST_HTML' "see FORM
IS_LAYOUT = lv_layout
IT_FIELDCAT = itb_fieldcat[]
IT_SPECIAL_GROUPS = lv_tab_group
I_SAVE = 'X'
IT_EVENTS = lv_events
IS_PRINT = lv_print
TABLES
t_outtab = i_ordertab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.
*& Form html_top_of_page
FORM html_top_of_page USING document TYPE REF TO cl_dd_document.
DATA: text TYPE sdydo_text_element.
CALL METHOD document->add_gap
EXPORTING
width = 100.
text = 'Cadbury: Daily Audit of Orders'.
CALL METHOD document->add_text
EXPORTING
text = text
sap_style = 'HEADING'.
CALL METHOD document->new_line.
CALL METHOD document->new_line.
CALL METHOD document->new_line.
text = 'User Name : '.
CALL METHOD document->add_text
EXPORTING
text = text
sap_emphasis = 'Strong'.
CALL METHOD document->add_gap
EXPORTING
width = 6.
text = sy-uname.
CALL METHOD document->add_text
EXPORTING
text = text
sap_style = 'Key'.
CALL METHOD document->add_gap
EXPORTING
width = 50.
text = 'Date : '.
CALL METHOD document->add_text
EXPORTING
text = text
sap_emphasis = 'Strong'.
CALL METHOD document->add_gap
EXPORTING
width = 6.
text = sy-datum.
CALL METHOD document->add_text
EXPORTING
text = text
sap_style = 'Key'.
CALL METHOD document->add_gap
EXPORTING
width = 50.
text = 'Time : '.
CALL METHOD document->add_text
EXPORTING
text = text
sap_emphasis = 'Strong'.
CALL METHOD document->add_gap
EXPORTING
width = 6.
text = sy-uzeit.
CALL METHOD document->add_text
EXPORTING
text = text
sap_style = 'Key'.
ENDFORM.
FORM end_of_list_html USING end TYPE REF TO cl_dd_document.
DATA: ls_text TYPE sdydo_text_element,
l_grid TYPE REF TO cl_gui_alv_grid,
f(14) TYPE c VALUE 'SET_ROW_HEIGHT',
w_lines type i,
w_lines1(9) type n.
DESCRIBE TABLE i_ordertab LINES w_lines.
w_lines1 = w_lines.
concatenate: 'TOTAL NUMBER OF RECORDS SELECTED: ' w_lines1 INTO ls_text
SEPARATED BY space.
adds test (via variable)
CALL METHOD end->add_text
EXPORTING
text = ls_text
sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
*set height of this section
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = l_grid.
CALL METHOD l_grid->parent->parent->(f)
EXPORTING
id = 3
height = 14.
ENDFORM. "end_of_list_html.
--END OF THE REPORT--Hi
1. first remove the ENDSELECT..use INTO table itab or INTO CORRESPONDING fields, Since you are joining the more tables this will take lot of time.
2. You are just using two fields from LIKP as selection screen fields to fetch the so much data.
see the table linkings apartfrom KUNNR between the tables
LIKP-VBELN = LIPS-VBELN
LIPS-VGBEL = VBAK-VBELN and LIPS-VGPOS = VBAP-POSNR
and
VBRP-AUBEL = VBAK-VBELN and VBRP-AUPOS = VBAP-POSNR and
VBRP-VGBEL = LIKP-VBELN and VBRP-VGPOS = LIPS-POSNR
use the above links and code again.
<b>Reward points for useful Answers</b>
Regards
Anji -
ALV Display with header on each page.
Hi experts,
I had develop the report which output comes in ALV with heading. While printing the output, suppose there are 60 lines in output and 15 lines on each page so 4 page will print. Now i want the same heading will come on each page.
Is it possible? if Yes how?
Pls reply.
Thanks,
Abhishek.Hi,
Write the heading in the top-of-page.
You will have to register the event TOP-OF-PAGE and in the corresponding form write the header.
Regards,
Ankur Parab -
ALV report editable to enter text and print with including the text?
Hi all,
I have to display output of a report in ALV format and i have to make two fileds can be editable to enter texts by user and able to print the list with that texts .
Is it possible using standard Function modules or I have to go for OO methods? Please give the sample code ?
Thanks,
Vamshi
Edited by: VAMSHI KRISHNA on Oct 31, 2008 4:25 PMHi Vamshi,
Check out the Below sample code for the editable ALV.
*& Report Z7CC_OOPS_ALV_EDITABLE
report z7cc_oops_alv_editable.
tables sflight.
data: begin of gt_outtab occurs 0. "with header line
include structure sflight.
data: celltab type lvc_t_styl.
data: end of gt_outtab.
data: gt_fieldcat type lvc_t_fcat.
data: g_carrid like sflight-carrid,
g_connid like sflight-connid.
data: gs_spfli type spfli. "#EC NEEDED
data: g_custom_container type ref to cl_gui_custom_container.
data: g_container type scrfname value 'BCALV_GRID_DEMO_0100_CONT1'.
data: g_grid type ref to cl_gui_alv_grid.
data: wa_outtab like gt_outtab.
* CLASS lcl_event_receiver DEFINITION
class lcl_event_receiver definition.
public section.
types: begin of sflight_key.
types: carrid type s_carr_id.
types: connid type s_conn_id.
types: fldate type s_date.
types: end of sflight_key.
types: sflight_keys type standard table of sflight_key,
sflight_table type standard table of sflight.
methods:
handle_data_changed
for event data_changed of cl_gui_alv_grid
importing er_data_changed.
methods:
get_inserted_rows
exporting
inserted_rows type sflight_keys.
methods:
get_deleted_rows
exporting
deleted_rows type sflight_table.
methods:
refresh_delta_tables.
methods: set_table_is_initial.
methods: set_table_is_not_initial.
methods: table_is_initial
returning value(initial) type char01.
private section.
* §4.Define internal tables to remember inserted and deleted lines,
* thus the delta between input made after the last saving.
data: inserted_rows type sflight_keys,
deleted_rows type standard table of sflight.
* This flag is set if any error occured in one of the
* following methods:
data: error_in_data type c.
* This flag signals that no records were read for the flight
* table initially:
data: initial_table type c.
** Methods to modularize event handler method HANDLE_DATA_CHANGED:
methods:
check_double_entries
importing
pr_data_changed type ref to cl_alv_changed_data_protocol.
methods:
update_delta_tables
importing
pr_data_changed type ref to cl_alv_changed_data_protocol.
methods:
perform_semantic_checks
importing
pr_data_changed type ref to cl_alv_changed_data_protocol.
methods:
get_cell_values
importing
row_id type int4
pr_data_changed type ref to cl_alv_changed_data_protocol
exporting
key type sflight_key.
endclass. "lcl_event_receiver DEFINITION
class lcl_event_receiver implementation.
method handle_data_changed.
* data: ls_good type lvc_s_modi,
* l_price type s_price,
* ls_new type lvc_s_moce.
* error_in_data = space.
** check if there exist double entries
* call method check_double_entries( er_data_changed ).
** remember new or deleted lines for saving
* call method update_delta_tables( er_data_changed ).
** check mt_good_cells semantically
* call method perform_semantic_checks( er_data_changed ).
* if error_in_data = 'X'.
* call method er_data_changed->display_protocol.
* endif.
endmethod. "handle_data_changed
method check_double_entries.
data: lt_good_cells type lvc_t_modi,
ls_good type lvc_s_modi,
ls_key type sflight_key,
ls_sflight type sflight,
l_flightdate like gt_outtab-fldate,
l_del_row type lvc_s_moce,
ls_outtab like line of gt_outtab,
l_reentered type c.
* §5.Check if there exist already other records with equal key fields.
* Check if the user has entered two new lines where the key fields
* are equal.
* Since CARRID and CONNID are read only, the check is restrained
* to field FLDATE.
* Algorithm: Copy all entries in MT_GOOD_CELLS to a dummy table.
* During the copying procedure check if there exists
* already a line with the same Flight date.
* loop at pr_data_changed->mt_good_cells into ls_good.
* case ls_good-fieldname.
* when 'FLDATE'.
* call method pr_data_changed->get_cell_value
* exporting
* i_row_id = ls_good-row_id
* i_fieldname = ls_good-fieldname
* importing e_value = l_flightdate.
* read table lt_good_cells with key
* value = l_flightdate
* transporting no fields.
* if sy-subrc = 0.
** There exists already a line with the same flight date!
* call method pr_data_changed->add_protocol_entry
* exporting
* i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
* i_msgv1 = text-m01
* i_fieldname = ls_good-fieldname
* i_row_id = ls_good-row_id.
* error_in_data = 'X'.
* else.
* ls_good-value = l_flightdate.
* append ls_good to lt_good_cells.
* endif.
* endcase.
* endloop.
** Check if any new entries already exist in gt_outtab.
** At this point, lt_good_cells contains only lines with
** FIELDNAME = 'FLDATE'.
* loop at lt_good_cells into ls_good.
* l_flightdate = ls_good-value. "flightdate, see above
* read table gt_outtab with key
* carrid = g_carrid
* connid = g_connid
* fldate = l_flightdate
* transporting no fields.
* if sy-subrc = 0.
** Check if this entry was deleted before, i.e. it is in the table
** of deleted rows. If so, the entry does not exist twice. The user
** has deleted a line and then reentered it.
* l_reentered = space.
* loop at pr_data_changed->mt_deleted_rows into l_del_row.
* read table gt_outtab into ls_outtab index l_del_row-row_id.
* if sy-subrc ne 0.
* message i000(0k) with text-e01."Fehler beim Löschen
* elseif
* ls_outtab-carrid eq g_carrid
* and ls_outtab-connid eq g_connid
* and ls_outtab-fldate eq ls_good-value.
* l_reentered = 'X'.
* endif.
* endloop.
* if l_reentered ne 'X'.
* call method pr_data_changed->add_protocol_entry
* exporting
* i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
* i_msgv1 = text-m01
* i_fieldname = ls_good-fieldname
* i_row_id = ls_good-row_id.
* error_in_data = 'X'.
* endif.
* endif.
* endloop.
** In this demo report you may prevent the selection
** of data by setting parameter 'p_ds'.
** If this is done, the next check is required:
* if me->table_is_initial( ) eq 'X'.
* call method get_cell_values
* exporting row_id = 1
* pr_data_changed = pr_data_changed
* importing key = ls_key.
* select single * from sflight into ls_sflight
* where carrid = ls_key-carrid
* and connid = ls_key-connid
* and fldate = ls_key-fldate.
* if sy-subrc = 0.
* call method pr_data_changed->add_protocol_entry
* exporting
* i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
* i_msgv1 = text-m01
* i_fieldname = 'FLDATE'
* i_row_id = 1.
* error_in_data = 'X'.
* endif.
** flag initial_table is reset in method 'update_delta_tables'
* endif.
endmethod. "check_double_entries
method update_delta_tables.
* data: l_ins_row type lvc_s_moce,
* l_del_row type lvc_s_moce,
* ls_key type sflight_key,
* ls_sflight type sflight,
* ls_outtab like line of gt_outtab.
** §6.Use protocol attributes MT_DELETED_ROWS and MT_INSERTED_ROWS
** to remember which lines where deleted or inserted. Save this
** information in your internal tables.
** deleted rows
* loop at pr_data_changed->mt_deleted_rows into l_del_row.
* read table gt_outtab into ls_outtab index l_del_row-row_id.
* if sy-subrc ne 0.
* message i000(0k) with text-e01."Fehler beim Löschen
* else.
* move-corresponding ls_outtab to ls_sflight.
** It should no be possible that the same line is deleted twice,
** so we just add the new key line to 'deleted_rows'.
* append ls_sflight to deleted_rows.
** If this line was inserted just before it is deleted:
* delete me->inserted_rows
* where carrid = ls_outtab-carrid
* and connid = ls_outtab-connid
* and fldate = ls_outtab-fldate.
* endif.
* endloop.
** inserted rows
** At this point ALV has not added new lines
** to gt_outtab, so you can not access their values
** by reading gt_outtab.
** Table MT_GOOD_CELLS holds new values that can be
** referenced using the ROW_ID.
* if me->table_is_initial( ) eq 'X'.
** No flights were selected initially. This is the first new line.
* call method get_cell_values
* exporting row_id = 1
* pr_data_changed = pr_data_changed
* importing key = ls_key.
* append ls_key to inserted_rows.
* call method me->set_table_is_not_initial.
* endif.
* loop at pr_data_changed->mt_inserted_rows into l_ins_row.
* call method get_cell_values
* exporting row_id = l_ins_row-row_id
* pr_data_changed = pr_data_changed
* importing key = ls_key.
** READ TABLE gt_outtab INTO ls_outtab INDEX l_ins_row-row_id.
** Just insert the new row regardless if the input is wrong
* append ls_key to inserted_rows.
* endloop.
endmethod. "update_delta_tables
method get_cell_values.
* get values of key cells of row ROW_ID
** CARRIER
* call method pr_data_changed->get_cell_value
* exporting
* i_row_id = row_id
* i_fieldname = 'CARRID'
* importing
* e_value = key-carrid.
* if sy-subrc ne 0.
* message i000(0k) with text-e02. "Fehler beim Einfügen
* endif.
** CONNID
* call method pr_data_changed->get_cell_value
* exporting
* i_row_id = row_id
* i_fieldname = 'CONNID'
* importing
* e_value = key-connid.
* if sy-subrc ne 0.
* message i000(0k) with text-e02. "Fehler beim Einfügen
* endif.
** FLDATE
* call method pr_data_changed->get_cell_value
* exporting
* i_row_id = row_id
* i_fieldname = 'FLDATE'
* importing
* e_value = key-fldate.
* if sy-subrc ne 0.
* message i000(0k) with text-e02. "Fehler beim Einfügen
* endif.
endmethod. "get_cell_values
method perform_semantic_checks.
* data: ls_good type lvc_s_modi,
* l_planetype type s_planetye,
* l_seatsmax type s_seatsmax.
* loop at pr_data_changed->mt_good_cells into ls_good.
* case ls_good-fieldname.
* when 'PLANETYPE'.
* call method pr_data_changed->get_cell_value
* exporting
* i_row_id = ls_good-row_id
* i_fieldname = ls_good-fieldname
* importing
* e_value = l_planetype.
* select single seatsmax from saplane into l_seatsmax
* where planetype = l_planetype.
* if sy-subrc ne 0.
* call method pr_data_changed->add_protocol_entry
* exporting
* i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
* i_msgv1 = text-m02
* i_fieldname = ls_good-fieldname
* i_row_id = ls_good-row_id.
* error_in_data = 'X'.
* else.
* call method pr_data_changed->modify_cell
* exporting i_row_id = ls_good-row_id
* i_fieldname = 'SEATSMAX'
* i_value = l_seatsmax.
* endif.
* endcase.
* endloop.
endmethod. "perform_semantic_checks
method get_inserted_rows.
* inserted_rows = me->inserted_rows.
endmethod. "get_inserted_rows
method get_deleted_rows.
* deleted_rows = me->deleted_rows.
endmethod. "get_deleted_rows
method refresh_delta_tables.
* clear me->inserted_rows[].
* clear me->deleted_rows[].
endmethod. "refresh_delta_tables
method set_table_is_initial.
* initial_table = 'X'.
endmethod. "set_table_is_initial
method set_table_is_not_initial.
* initial_table = space.
endmethod. "set_table_is_not_initial
method table_is_initial.
* if initial_table = 'X'.
* initial = 'X'.
* else.
* initial = space.
* endif.
endmethod. "table_is_initial
endclass. "lcl_event_receiver IMPLEMENTATION
data: g_verifier type ref to lcl_event_receiver.
data: g_max type i value 100.
data: gs_layout type lvc_s_layo.
data: ok_code like sy-ucomm,
save_ok like sy-ucomm.
parameters: p_ds type c as checkbox. "delete selection
select-options s_carrid for sflight-carrid
no intervals no-extension default 'LH'.
select-options s_connid for sflight-connid
no intervals no-extension default '0400'.
start-of-selection.
g_carrid = s_carrid-low.
g_connid = s_connid-low.
* first check airline and connection
select single * from spfli into gs_spfli
where carrid = g_carrid
and connid = g_connid.
call screen 100.
*& Module STATUS_0100 OUTPUT
* text
module status_0100 output.
set pf-status 'MAIN100'.
set titlebar 'MAIN100'.
if g_custom_container is initial.
perform create_and_init_alv changing gt_outtab[]
gt_fieldcat.
endif.
endmodule. " STATUS_0100 OUTPUT
*& Form create_and_init_alv
* text
* <--P_GT_OUTTAB[] text
* <--P_GT_FIELDCAT text
form create_and_init_alv changing pt_outtab like gt_outtab[]
pt_fieldcat type lvc_t_fcat.
data: lt_exclude type ui_functions.
create object g_custom_container
exporting container_name = g_container.
create object g_grid
exporting i_parent = g_custom_container.
* Create Objekt to verify input values.
* (This object is already needed in form SELECT_DATA).
create object g_verifier.
* SET HANDLER g_verifier->handle_data_changed FOR g_grid.
perform select_data changing pt_outtab[].
perform build_fieldcat changing pt_fieldcat.
perform exclude_tb_functions changing lt_exclude.
gs_layout-stylefname = 'CELLTAB'.
call method g_grid->set_table_for_first_display
exporting
it_toolbar_excluding = lt_exclude
is_layout = gs_layout
changing
it_fieldcatalog = pt_fieldcat
it_outtab = pt_outtab[].
* Set editable cells to ready for input initially
call method g_grid->set_ready_for_input
exporting
i_ready_for_input = 1.
endform. " create_and_init_alv
*& Form select_data
* text
* <--P_GT_OUTTAB text
form select_data changing pt_outtab like gt_outtab[].
data: lt_sflight type table of sflight,
ls_sflight type sflight,
ls_outtab like line of gt_outtab,
l_index type i,
ls_spfli type spfli, "#EC NEEDED
lt_celltab type lvc_t_styl.
* Check parameter 'p_ds'=>optionally select no data
if p_ds is initial.
* Select data from sflight
select * from sflight into table lt_sflight up to g_max rows
where carrid = g_carrid
and connid = g_connid.
endif.
if sy-subrc ne 0 or not p_ds is initial.
* no flights were found!
* We provide some default values for the first line that is entered:
ls_outtab-carrid = g_carrid.
ls_outtab-connid = g_connid.
case g_carrid.
when 'LH'.
ls_outtab-currency = 'DEM'.
when others.
ls_outtab-currency = 'US'.
endcase.
ls_outtab-seatsocc = 0.
ls_outtab-paymentsum = 0.
* set fields FLDATE, PRICE and PLANETYPE to editable
perform fill_celltab using 'RW'
changing lt_celltab.
insert lines of lt_celltab into table ls_outtab-celltab.
append ls_outtab to pt_outtab.
* Tell Verify-Objekt that the table was initial
call method g_verifier->set_table_is_initial.
else.
call method g_verifier->set_table_is_not_initial.
* move corresponding fields from lt_sflight to gt_outtab
loop at lt_sflight into ls_sflight.
move-corresponding ls_sflight to ls_outtab.
append ls_outtab to pt_outtab.
endloop.
* §3.Set all cells of the table non-editable by using the style table.
loop at pt_outtab into ls_outtab.
l_index = sy-tabix.
refresh lt_celltab.
perform fill_celltab using 'RO'
changing lt_celltab.
* Copy your celltab to the celltab of the current row of gt_outtab.
insert lines of lt_celltab into table ls_outtab-celltab.
modify pt_outtab from ls_outtab index l_index.
endloop.
endif.
endform. " select_data
*& Form fill_celltab
* text
* -->VALUE(P_MODE) text
* -->PT_CELLTAB text
form fill_celltab using value(p_mode)
changing pt_celltab type lvc_t_styl.
data: ls_celltab type lvc_s_styl,
l_mode type raw4.
* This forms sets the style of columns 'PRICE', FLDATE and PLANETYPE
* editable
if p_mode eq 'RW'.
l_mode = cl_gui_alv_grid=>mc_style_enabled.
else. "p_mode eq 'RO'
l_mode = cl_gui_alv_grid=>mc_style_disabled.
endif.
ls_celltab-fieldname = 'FLDATE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
ls_celltab-fieldname = 'PRICE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
ls_celltab-fieldname = 'PLANETYPE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
endform. " FILL_CELLTAB
*& Form BUILD_FIELDCAT
* text
* <--P_GT_FIELDCAT text
form build_fieldcat changing pt_fieldcat type lvc_t_fcat.
data ls_fcat type lvc_s_fcat.
call function 'LVC_FIELDCATALOG_MERGE'
exporting
i_structure_name = 'SFLIGHT'
changing
ct_fieldcat = pt_fieldcat.
loop at pt_fieldcat into ls_fcat.
if ls_fcat-fieldname eq 'PRICE'
or ls_fcat-fieldname eq 'PLANETYPE'
or ls_fcat-fieldname eq 'FLDATE'.
* §1.Set status of columns FLDATA, PRICE and PLANETYPE to editable.
* Since all cells are set to non-editable (see step 3) the cells
* of this columns will only be editable for new lines.
ls_fcat-edit = 'X'.
* Field 'checktable' is set to avoid shortdumps that are caused
* by inconsistend data in check tables. You may comment this out
* when the test data of the flight model is consistent in your system.
ls_fcat-checktable = '!'. "do not check foreign keys
modify pt_fieldcat from ls_fcat.
elseif ls_fcat-fieldname = 'CARRID'
or ls_fcat-fieldname = 'CONNID'
or ls_fcat-fieldname = 'CURRENCY'.
* §2.Use field AUTO_VALUE of the fieldcatalog to preset values when new
* lines are added.
ls_fcat-auto_value = 'X'.
ls_fcat-checktable = '!'. "do not check foreign key relations
modify pt_fieldcat from ls_fcat.
endif.
endloop.
endform. "build_fieldcat
*& Form exclude_tb_functions
* text
* <--P_LT_EXCLUDE text
form exclude_tb_functions changing pt_exclude type ui_functions.
data ls_exclude type ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_undo.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
append ls_exclude to pt_exclude.
endform. " EXCLUDE_TB_FUNCTIONS
*& Module USER_COMMAND_0100 INPUT
* text
module user_command_0100 input.
save_ok = sy-ucomm.
clear ok_code.
case save_ok.
when 'SAVE'.
* perform save_data.
when 'BACK'.
* §10.Unlock your database table.
* perform unlock_sflight.
leave to screen 0.
when 'EXIT'.
perform exit_program.
when 'ADD'.
perform add_line_item.
when others.
* do nothing
endcase.
endmodule. " USER_COMMAND_0100 INPUT
* FORM EXIT_PROGRAM *
form exit_program.
leave program.
endform. "exit_program
*& Form ADD_LINE_ITEM
* text
* --> p1 text
* <-- p2 text
form add_line_item .
data: lt_rows type lvc_t_row.
data: wa_rows type lvc_t_row with header line.
data: tabix type sy-tabix.
*&Find the row ( index ) number
call method g_grid->get_selected_rows
importing et_index_rows = lt_rows.
call method cl_gui_cfw=>flush.
read table lt_rows into wa_rows index 1.
tabix = wa_rows-index .
insert gt_outtab index tabix.
*REFRESH_TABLE_DISPLAY
call method g_grid->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
* EXCEPTIONS
* FINISHED = 1
* others = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " ADD_LINE_ITEM
Thanks,
Chidanand -
Using a Zebra LP-2844 Printer with Paypal/eBay?
As we are trying to streamline our online business, we purchased a label printer with thermal cabiblities to save on ink. Little did we know that it would be a gigantic nightmare. Our first expeirence was with a Brother printer, which turned out to be not compatible with eBay. Decided with the Zebra after reading some great reviews, and it turns out it isn't natively supported by Zebra either. However, I have read of people that are using it successfully.
To install it, I just plugged it in and used the Native Zebra EPL2 drivers that are included with Mavericks OS.
However, now that I'm trying to actually print something with Paypal, I can't get the labels to print correctly. It won't all fit on one label, even if I change the setting to equal the label size of 4 x 6.
I did some research about CUPS, but am unsure if I'm supposed to use it to install ADDITIONAL drivers, or if it's just a way to tweak settings that aren't available in system preferences. I changed the default setting to 4 x 6 within CUPS, but it still doesn't fit on the labels in Paypal.
I've spent days now trying to get printing set up more efficently, and cannot figure this out. It is a huge nightmare.
Any suggestions (is there ANY native supported thermal printer that works with eBay paypal?), should I use Endicia, is that a better option? Should I try installing additional drivers, if so from where? I'm just stumped at this point and in a little over my head.You might have to partition your drive on your MAC and add Windows OS as a second operating system, then add Google Chrome to Windows. I beleive you have to reboot to go between the two OS's.
-
How do I get the Layout Guides (A,B,C column headers and 1,2,3 Row Headers) to print on my spreadsheet? They are invaluable for discussing the data with my clients over the phone.
They appear while I am editing, but don't print with the spreadsheet. I know how to do it in Excel, but I am transitioning to Numbers. I can't imagine I have to type them into their own columns and rows. It must be a difference in vernacular that I can't find the solution in the User Guide. Can anyone help?Hi ktjobauer,
Numbers is not Excel and Excel is not Numbers. Numbers is WYSIWYG (at least in File > Print and the actual printout).
I can't imagine I have to type them into their own columns and rows.
No, you don't. You can use the charm of Numbers to create cell references for your Excel clients.
In this Numbers Table, I have added some extra Columns that you can hide later.
Column B =COLUMN(A2)
Column C =HLOOKUP(B2,'Table 1-1' :: $1:$2,2,FALSE) [explanation later]
Column D =ROW(B2)
Column E =C2&D2
Add those formulas to the first Body Row (below the Header Row) and Fill Down.
Column C refers to another Table which you need only create once, to convert a Column number to a letter:
and so on from 1-26, A-Z.
You can move the second Table to another Sheet to hide it. Formulas will automatically adjust to keep the links between Sheets.
Now in the first Table, select and Hide Columns B,C,D. Formulas will continue to work with hidden cells:
Regards,
Ian. -
Printing Form Header Text in Smartforms
Hi,
I have created smartform for SD module.I am printing Form header text in a window by using loop.I am getting the text with the help of READ_TEXT function module.It comes as we type in Form header.But the problem is if they type more than 15 lines it is not printing.I want to print the rest of the lines in next page.How to do this?Hi,
In smartforms, only the main window is a dynamically varying one.
So give your include text concept in the main window..
so that if your text increases more than a page, it will be printed in the next line..
You can maintain your text in so10 transaction.. with text id and text name..
using include text u can simply give the Id and text name in forms, you will get the enetered text.
regards,
vijay.R -
Print the head text in a Smartforms - READ_TEXT Function
Hello,
I have a huge problem to print a MM document's. I need show the text head in the footer of the document. For this i use the READ_TEXT function. To use this function i enter to vl03n transaction, enter the document number, go to the text head, double click, and i see the parameters = Name (document number), language (ES), id (0001), object (VBBK)...
In the smartform code I write this:
<b>DATA: leng TYPE thead-tdspras,
l_fname TYPE thead-tdname.
DATA: il_tline LIKE tline OCCURS 0 WITH HEADER LINE.
leng = 'ES'.
l_fname = is_dlv_delnote-hd_gen-deliv_numb.
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = '0001'
language = leng
name = l_fname
object = 'VBBK'
TABLES
lines = il_tline.
comentario = ''.
LOOP AT il_tline.
CONCATENATE comentario il_tline-tdline INTO comentario SEPARATED BY space.
ENDLOOP.</b>
But to try print a document with number 0012345678 through to the IDCP transaction return me the follow error:
Text 0012345678 ID 0001 language <b>EN</b> no exist
why change the language?
i see the STXH table, and i found this register:
MANDT TDOBJECT TDNAME TDID TDSPRAS
200 VBBK 0012345678 0001 S
Where is my problem?
Please, help me!!!
Regards.Hi rudiRocket,
Welcome to Numbers discussions.
Yes I see what you're talking about, never noticed it. To remove the shadow I tried numerous fonts but, still the shadow. Let's hope someone else has a better answer. Be aware folks on these Discussion boards are, as yourself end users not Apple employees.
In the mean time please read the below instructions:
Send feedback directly to the Numbers team for enhancement requests: at the top of your screen to the right of the blue Apple please click "Numbers" > "Provide Numbers Feedback". Explain in detailed what you've found. This makes your request known to the Numbers team directly; don't expect to hear back from them. I've sent many as well.
Let's hope the next version of iWork incorporates many of the requested enhancements.
Thank you in advance for doing that.
Again, welcome to Numbers Discussions, have fun here.
Sincerely,
RicD -
Problem printing on dot-matrix printer with continuous paper
Post Author: kdebruyckere
CA Forum: .NET
Hi,
We're currently developping an .net application for a customer of ours in VS2005 (c#). I used crystal reports for VS2005 to create an invoice.
The invoices have to be printed on a dot-matrix printer with continuous paper (Brother M-4318). When an invoice is only one page long, there's no problem. Even when printing several sigle-page invoices after another, all goes fine. The problem occurs when an invoice is more then one page longe. The first page comes out correctly, but on the following pages everything moves ca. 3 mm upwards (3 mm on the second page, 6 mm on the third page, and so on...). On the report 'Design > Printer Setup', I selected the right printer, the right paper size, ... On the report there's a page header (consisting of two sections), and there's a page footer that is only printed on the last page, but there are no report header and no report footer.
I can not figure out what seems to be the problem. Has anyone else had this or a similar problem before? If so, please let me know. Any suggestions are welcome.
thxPost Author: ole
CA Forum: .NET
Continuous paper is a little bit longer than normal A4 paper. I found only one way to set it: ReportDocument.PrintOptions.PaperSize =CrystalDecisions.Shared.PaperSize.PaperFanfoldStdGermanI had no success, setting continuous papersize by printer setup. ... waiting for CustomPaperSize-Property (like CustomPaperSource)... Olaf -
Apex 4.2.2 PDF Printing with Apex 2.0 Listener
We recently installed Apex 4.2 with the Apex 2.0 Listener and can successfully print interactive reports and classic reports to PDF. I viewed Mark Sewtz PDF Printing with Apex 4.2.2 and saw how he is using third party tools to format reports. We have also looked into the Jasper Report Integration Toolkit, but have only got it working on the Tomcat environment, not WebLogic.
I'm trying to download a classic report in PDF format with our logo displayed at the header. In the print attributes section, there is a section for header. I've tried adding the following in the header section:
<img src = "http://hr.unm.edu/common/images/unm_dept_logo.gif">
No Logo Prints
#APP_IMAGES#unm_dept_logo.gif
Prints in header:
wwv_flow_file_mgr.get_file?
p_security_group_id=3930016164431413%26p_flow_id=106%26p_fname=unm_dept_logo.gif
#WORKSPACE_IMAGES#unm_dept_logo.gif
Prints in header: /i/unm_dept_logo.gif
I've also added the logo in the report region, prior to the columns printing, but no logo downloads to PDF.
Does the Apex Listener only render text? Is there any way to get the logo to print in the header without using a third party tool? Any suggestions are greatly appreciated. Thanks!Hi,
There are different options to include images in your PDF exports. What's important to understand though is that with the PDF export functionality we separate the formatting from the actual data. So the formatting is defined in your RTF or XSL-FO templates and the data is stored in the XML that APEX generates based on your report data. We have several formatting options exposed on the print attributes pages, i.e. you can define page formatting, dimensions, fonts, colors, etc - all of these are applied to what we call generic XSL-FO templates. Those templates are generic in that they can be used with different reports, having variable numbers of columns and variable column names. Those formatting attributes can not be used however with named column templates, such as those that you generate with BI Publisher or those third-party tools I talked about in my Blog.
So if you want to use these formatting options, you need a generic report layout - which you get out of the box using the built-in layout. But you also have the option to create your own generic report layout (see Shared Components -> Report Layouts). When creating a custom generic report layout, you'll get a copy of the built-in layout as a starting point. Once created, you can manually modify this layout to meet your needs. As you edit this template, you'll find a number of #....# substitution strings. This is what APEX uses at runtime to fill in your formatting values as well as to assemble your generic layout based on your result set.
Now one way to include your own image would be to add an image reference to this generic report layout. You can't use the page header or footer attributes on the print attributes page for that because the FOP rendering engine does not understand or translate HTML. It renders XSL-FO. So to add your own image reference, you need to use XSL-FO mark-up. If you want to add an image to your page header, look for the #PAGE_HEADER# substitution string in the "Page Template" attribute of your generic report layout. You should be able to find the following:
<fo:inline xsl:use-attribute-sets="page-header">
#PAGE_HEADER#
</fo:inline>
Now assuming you have a file stored in your local images directory on localhost, you could add the following external graphic reference:
<fo:inline xsl:use-attribute-sets="page-header">
<fo:external-graphic src="http://localhost:8080/i/cloud.gif" content-height="scale-to-fit" height="30px" content-width="150px" scaling="non-uniform"/>
#PAGE_HEADER#
</fo:inline>
Once you're done with your chanages, save the report layout and edit your report. Go to the print attributes and select your generic report layout and then run your report page and export the PDF. Provided the APEX Listener is able to find this external image reference, it will now be included above your report in your PDF document.
Regards,
Marc
Maybe you are looking for
-
How many users can you have on one account ?
Hi, I have just created a ID with Adobe Reader for a group to use files stored in cloud. I would like to know how many users can access the account at one time via, mobile devices, ipad, desktops ?
-
Good receipt exceed purchase order quantity
Hello all, I am trying to do a good receipt that exceed purchase order quantity but I have an error message that I can´t do it. I configure tolerance limits B1, B2 and VP but it doesn´t work. I only can do a good receipt that exceed purchase order if
-
Help!!
-
Selection tool has stopped working...
I was making some edits on my project and when I placed a PNG that I had just edited, my selection tool stopped working. I can select a graphic, but as soon as I try to move it around on the page, nothing happens. As we all know, the selection tool i
-
Appleworks 6.2.2 won't work w. OSX 10.5.4
Ever since I got a new iMac running OSX 10.5.4 Appleworks 6.2.2 has had problems. It quits unexpectedly in the middle of a task, I cannot quit except by using force quit, and it frequently won't launch. I cannot reinstall from disks as this was put o