Printed document in once, 2nd time it will show duplication

Hi,
I can print delivery document and no problem at all. but i want when 2nd time i will take print of this delivery document it will show copy or already printed in the printed document.
How can i do this?
Regards,
Mizan

Hi Mizan,
If you are using Crystal Reports then you can create a formula like the example below to show original against copies:
select {ORDR.Printed}
case 'Y': "Copy of original"
case 'N': "Original"
default: '';
If the text qualifiers do not work then you can always create two formulas that contain the wording above and insert these into the formula:
select {ORDR.Printed}
case 'Y': {@Copy}
case 'N': {@Original}
default: '';
Regards,
Liam.

Similar Messages

How do I convert a power point document to a pdf where it will show the notes for each slide?

How do I convert a power point document to a pdf where it will show the notes for each slide?

To get the 'handout view' with a slide and the speaker notes on the same page, you have to save the PDF file directly from PowerPoint (the later versions of Microsoft Office can make PDF files without the help of Acrobat).

In Transaction CC04, Is there a way to print documents at once

Hello Everyone,
In Transaction CC04, In Document Tab, when the Document Number, Document Type, Document Part are specified, t goes to the Product Structure Screem where there is a drill down for Sub ordinate documents. Under the Subordinate documents There are many documents.
Under each document, There are sub ordinate documents included with it. User needs a way to print all the documents at once that have status as RL( Released). Is there a way to Print all documents with out drilling down in to each document and print. Please tell me a way to figure out this.
Thank you

You can. If it's one of the HP printers that support AirPrint then you can do so directly (this page lists the printers and has info on Airprint http://support.apple.com/kb/HT4356), there is the Epson iPrint app for some of their printers. Otherwise there are third-party print apps such as Print N Share, Print Central etc

Printing documents at once in SBO 8.8

Hi all
My client want to print 4 documents (Invoice, Delivery note1, Delivery note2, Warranty) by one click. (when add new documents in the A/R invoice). (SBO 8.8 PL8)
Someone know it is possible to make using PLD or CR ?
Thanks in advance.

H!,
Use Administration / Setup / General / Report and Layout manager then select respective document and then select print sequence tab
Hope it helps !
Samir Gandhi

When backup the imac with time capsule, the time machine will show error with volumes/data/imac/sparsebundle could not be created??

Can anyone help with the above situation??

There are a number of things that cause the problem.
http://pondini.org/TM/C17.html
Usually if you go to disk page in manual setup of the airport utility (5.6 of course as 6 is a toy), disconnect all users and it will then work ok again.
The issue is Lion (maybe contributed to by the 7.6 and later firmware).

My MacBook prints documents every time I open it up. How can I stop this?

My macbook likes to print my most recently printed documents over again every time I open it up.

Try opening the print queue and deleting the document. If that does not work delete the printer from the printer list and reÏnstall it.
In Mavericks that is found at
 > System Preferences > Printers and Scanners > Open Print Queue
I suspect it is the same in older OS X versions.

Archiving print document and the FICA document is not closed yet

Hi SAP,
I Am testing the archiving object ISU_PRDOCL and ISU_PRDOCH and I could archive a print document for which the FICA document is not sold (still Open Item). is it a bug or the standard is made like this or do we have to implement an OSS note for this isue.
Thanks;
Best regards
Raissi Hanane

Hello,
Yes, print document will be archived even though corresponding FICA document is still open or outstanding.
To-over come this problem you can enhance your Print document header and line item archive program to exclude archiving of print document header and line item with corresponding open FICA document.
SAP has provided enhancement for Print document Archive program :
Print document headers (ETOAR001)
Print document line items (ETOAR002)
Hope this will resolve your issue.
-Thanks,
Ajay

Strange RED HIGHLIGHTS appears in my print documents

Strange RED HIGHLIGHTS appears in my print documents, but in the preview dont been showed, whats happens.
OS: Windows XP
Acrobat Reader Version: 8.1
Printer: HP2605dn
Ram: 512 mb
Processor: 1.4 Ghz P4

Eliezer...go to the Print dialog box and click on the Advanced button on the bottom left of the dialog. When the Advanced window comes up go to the lower left corner and put a check in the Print As Image box. Then click OK and then try printing. This is a print driver issue and hopefully checking the Print as Image box will let you print without the red highlights. Good Luck!

Archive Print Documents

Hi
I am trying to archive print documents for the first time in our system. Rention period is passed for these documents.
When I am running the Print Document Line Item Archiving write job it is coming back with no data. I checked these documents are printed no other event is implemented to stop these documents from getting archived.
Below what I have in the spool at the completion of the job.
Selection screen
Print Document No.              XX9000003503
Contract Account
Portion
End Date                        20140315
End Time                        152603
Runtime Restriction Active
Archiving                       X
Snapshot
Data Destruction
Test Mode
Production Mode                 X
Delete with Test Variant
Detail Log                      X
Log Output                      2
Archiving Session Note
Production Mode: Statistics on Written Data Objects
Summary
Archiving Session Number                                  000161
Number of Written Data Objects                                0
Size of Archiving Session in MB                           0.000
Proportion of Header Data in %                              0.0
Log (Summary)
There are no log messages
Any suggesion? I know I am missing some small thing but not sure what?
Thanks
Brady

Hi
Could you please tell me about the pre processing run?
I'am facing the same issue.
Also please look into my query:Archiving related doubts
Thanks in advance
Anshuman

7110 can only print 1 page at a time of 8 page document

I have a new officejet7110. when i send an multipage document (pdf or dwg) it prints the first page fine, then the subsequent pages are 3/4 printed and 1/4 blank. how to send a multipage doc to print all at once?
This question was solved.
View Solution.

Hello MarinArchitect,
Welcome to the HP Forums.
I see that you are having a few printing issues.
I would very much like to assist you with these issues however I will need to know some information before we can get to any troubleshooting steps.
Is the printer connected to the computer with a USB cable, Wireless or Either net connection?
Which Operating System you are running?
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
What program are you attempting to use when printing?
Have you attempted to do a multiple page copy and if so did you have the same results?
Write me back when you have time and I will be more than happy to help.
I do suggest that you please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Hope to hear from you soon.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How can I sync my new iPad with my itunes account on my 4 yr old macbook? I plugged the iPad in once and all music synced. The 2nd time it said update needed. Mac says no update available.

How can I sync my new iPad with my itunes account on my 4 yr old macbook? I plugged the iPad in once and all music synced. The 2nd time it said update needed. Macbook says no update available.

" how can I sync my iphone to my mac book without losing all the music and pictures on it?"
You cannot. Copy everything you want form the old computer to the new one, then sync it.
it basically says you have to erase your iphone to sync to a new itunes!
Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content.

Currency Conversion at the time of Invoice Print Document Creation

Hi,
In our system for some accounts we receive payments in USD (foreign currency) and at the time of posting, the amounts are stored in both transaction currency and local currency (CAD).
We have a scenario as follows:
Payment is posted as a payment on account (sitting as open credits)
At the time of invoicing, these items are picked up to be included in the bill
Now while calculating the invoice amount, these payments are again converted into local currency by using the configured exchange rate (SAP NetWeaver>General settings>Currencies)
For e.g.
Document
Amt in USD
Amt in CAD at posting
Amt in CAD at invoicing
300000000
200
214
220
300000001
144
145
159
The print document calculates the invoice amount using (220+159) which is not in sync with what we see in FPL9 (214+145). It also causes the invoice to go out of balance as print workbench is picking up the amounts from the table.
My understanding is that we should be able reconcile the invoice header amount with the account balance in FPL9. In such cases, depending on when the invoice is created (cancel/rebills etc) the amounts will always be out of sync as the exchange rate changes frequently.
Is there a way this functionality can be controlled from the invoicing side? Or does the PWB code have to be modified to handle this situation.
Thanks for your time.
Regards,
Prashant

Did you read User Exits For Billing in online help ?
Regards,
Raymond

Printing several documents at once

Hello,
We are looking for a possibility to print out several originals at once (mass print). The originals might belong to several DIRs. I know that there are external solutions available (e.g. from SEAL Systems). But my question is wheather there are SAP solutions available for this requirement. I can think of printing from CV04N result list, printing from EasyDMS (printing complete EasyDMS folder), printing from CAD-Desktop (CDESK) or from Web Documents. But in SAP Standard (ECC 6.0) you can alway just print one original at a time. I really appreciate any information!
Thank you!
Best regards
Matthias Beer
SAP Business Applications
Villeroy & Boch

(haven't done this myself, but someone else here says it works...)
Create a desktop printer for the HP - using Printer Setup Utility in the Printers menu.
Drag and drop your docs on the desktop printer.
Please let us know about your success with this.

PLD - print several documents at once

Hi.
Can anyone tell me if it's possible to print several documents at once in SAP B1 2007A.
When creating sales order, I would like to print both order confirmation and a second document used as pick list.
Thanks and regards, Runar.

I do not believe that it is possible to print two different layouts at once except for special cases such as printing batch information along with a marketing document. You will see these special cases in Print Preferences.
The usual techniques for printing two documents from one layout are:
1. Repeat the repetitive area etc.
OR
2. Specify two copies of the layout.
In both cases, you would use formula fields that would react to which print you were producing. For example, printing a different page heading on copy 1 and copy 2.
Regards,
Douglas

Why won't Spotlight find a Text document in Search Results a 2nd time?

On 10.5.8:
I can type a search word into Spotlight. It will show results. I then open let's say an Appleworks text document from that search. Then I close that document and retry the same search: Now that same document will not show up in the search results for that exact word and it WILL NEVER show up again in search results. In other words after a file has been found and opened in search once , it will never sppear in search results again for the same word.
If you have an idea how to fix this please tell me. Thank you

If anyone else has any idea please tell me. I already tried what is outlined in http://support.apple.com/kb/HT2409 very carefully and it didn't fix it. I have also "repaired disk permissions" and that didn't work.
I specifically want to be able to search my Appleworks documents. Currently I can create an Appleworks document, put "widget" in the document, save it, search for "widget" and it won't even show up in search results so something is seriously amiss. So I was wrong in the question title, coz it won't even show up one time!
Baring that does anyone know a search program that works with Mac that I can download and use?
The funny thing is that I have already tried about 3 of those and guess what? It still will not show those Appleworks documents in the search results. Given that fact, can anyone think of a reason why my Appleworks documents never show up in any type of search results?
Thank you

Printed document in once, 2nd time it will show duplication

Similar Messages

Maybe you are looking for