Printing Crystal report from web

I am using crystal report 8.5 and Coldfusion MX 6.1
I open my report in a blank page. Everything show up
properly.
However, in my report, I have 12 pages. When I print it it
only show up as 1-2 pages. I notice that on screen, when I click
next ( to go to the next page of the report ), the url show up as
whatever my path is and the word "report" + the page -1 + htm
eg. If I am on page 2 of the report, my url would be
\\localhost\mywebfolder\report1.htm
Anyone have the same problem? Any solution?
* I am thinking of taking off the grouping in the report, see
if that make any different!

Hiya,
It isn't clear how you are calling the report (cfreport,
location, etc.,).
With 8.5 professional and higher, there is report server; 8.5
enforces the five instance connection license that the 8.0 version
implied and the 7.0 version didn't have at all. This methodology
allows for using the Crystal web report engine which supports the
use of an ActiveX viewer or Java Viewer.
I have an annoyance where an application that has run for
more than five years using the ActiveX viewer used to run without
prompting for database credentials but now does.
Take a look here for some hints
http://www.vordesigns.com/Portal/phpBB2/viewtopic.php?t=154
I can send you the page cfm pages I use but it references a
table of report names, you will have to do a little of your own
debugging to get it to work in your enviroment.
There is also a topic post in March from me
http://www.macromedia.com/cfusion/webforums/forum/messageview.cfm?catid=3&threadid=1137866 &forumid=1
... or is it one of my pseudonyms?

Similar Messages

Unable to print crystal report over web using ActiveX Control

Post Author: jimmyp
CA Forum: General
We have a problem with printing crystal report over web using ActiveX Control. When clicking print button, it only shows a blank dialog web crystal viewer page without any error. The page just simply hangs. We installed the PrintControl DLL and enable all the security setting for ActiveX Control for IE. It still does not print. Does anyone know why?
Environment.
Bundle Crystal Report v10
Asp.net 2.0
IE 6.0 or higher.
Appreciate for your help.
Jimmy

Post Author: Ian Kulmatycki
CA Forum: General
A team member here found this, I haven't read it, I'm not sure if our problems are related to this, but hopefully it helps someone:
-ian
When Secure Sockets Layer (SSL) is enabled, using the ActiveX control to print reports from a Crystal 10 DHTML viewer results in the following error message:
"A communication error occurred, printing will be stopped."
How can this error message be resolved?
Resolution
This is a known issue with Crystal Reports 10 and Crystal Enterprise 10 viewers and has been tracked. The Track ID is ADAPT00282199.
This error occurs due to the receiving application performing a case-sensitive check for the HTTPS request header value "ON". When a sender application sends the value as "on" in lower case, the error occurs. The update below changes the receiving application to be case-insensitive.
Hot Fixes or Service Packs address this issue as indicated below. With the updates, this issue is resolved.
Unless indicated otherwise, Weekly Hot Fix updates from our FTP site have only been tested with English versions of products.
For Crystal Reports 10 and Crystal Enterprise 10, the update for this issue is included in the Crystal 10 Viewers Weekly Hot Fix (WHF). This is available in English only at the following location:
ftp://ftp.crystaldecisions.com/outgoing/EHF/viewers10win_en.zip
This issue is addressed in the following components (and later versions):
PageObjectModel.dll, version 10.0.5.785, dated 8/25/2004
ReportRenderer.dll, version 10.0.5.785, dated 8/25/2004
WebReporting.dll, version 10.0.5.785, dated 8/25/2004

Problem in printing Crystal Report from SAP Business One - the printing cut in it width margins

Hi
i'm trying to print crystal report layout from sap b1. when i preview the report as pdf file, i have the option to choose Fit in size option and then the layout print O.k with out any margins that been cut.
The problem start when i'm trying to print the layout directly from sap b1 (printer button) which cause the page to be cut in it width margins.
How can i control the printing of crystal layout when i'm printing it directly from sap b1? do i have the option to chose 'Fit page size' from sap system?

Hi,
Please check SAP note:
1820939 - Page settings of Crystal Reports not transferred
correctly
Thanks & Regards,
Nagarajan

Printing Crystal Reports from UDO form

Dear Experts,
I want to open a Crystal report from an addon. I've already found [the following thread|http://forums.sdn.sap.com/thread.jspa?threadID=2039424&start=0&tstart=0] and the [mentioned blog post|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/26720], and applied the solutions given there, but setting the parameters still does not work.
The report is opened, but the report gives me the message "Input string was not in a correct format", and asks for the parameter. When I enter the parameter, the report shows correctly.
My form is an UDO form loaded from XML, ObjectType set to my UDO. According to the latest answers, this ObjectType setting is the problem.
My code is the following:
Setting the form (the report is already imported into SAP, its DocCode is RCRI0002):
AddOn.Application.LayoutKeyEvent += new SAPbouiCOM._IApplicationEvents_LayoutKeyEventEventHandler(SetPrinter);
SAPbobsCOM.ReportTypesService rptTypeService = (SAPbobsCOM.ReportTypesService)
     AddOn.Company.GetCompanyService().GetBusinessService(SAPbobsCOM.ServiceTypes.ReportTypesService);
SAPbobsCOM.ReportTypeParams rptParams = (SAPbobsCOM.ReportTypeParams)
     rptTypeService.GetDataInterface(SAPbobsCOM.ReportTypesServiceDataInterfaces.rtsReportTypeParams);
rptParams.TypeCode = "RCRI";
SAPbobsCOM.ReportType updateType = rptTypeService.GetReportType(rptParams);
updateType.DefaultReportLayout = "RCRI0002";
rptTypeService.UpdateReportType(updateType);
SboForm.ReportType = "RCRI";
the eventlistener function:
public void SetPrinter(ref SAPbouiCOM.LayoutKeyInfo eventInfo, out bool BubbleEvent)
     BubbleEvent = true;
     if (eventInfo.ReportTemplate == "RCRI" && eventInfo.ReportCode == "RCRI0002")
          eventInfo.LayoutKey = "21"; //Set the key of the layout - hardcoded for testing
I work on version 8.81 PL08
Has anyone found a solution? Is there a solution on higher patch?
Thanks
Andrea

OK, so we returned to this problem, and now I managed to make it work on 8.82 PL11. And now I can't remember anymore how I tried it back then. Maybe I did not use the DocKey@ parameter in the Crystal report.
Anyhow, it looks like it works now.

Aski user information while trying to print a report from a web application

Hi,
I am trying to print a report from web application. When I click on the print button then the page is redirected to the below link and asking for user information. See the below given link for more help.
_http://<server><port>PlatformServices/service/app/logon.do?appKind=InfoView&service=%2FOpenDocument%2FappService.do&backContext=%2FOpenDocument&backUrl=%2Fopendoc%2FopenDocument.jsp%3FSERVICE%3D%252FOpenDocument%252FappService.do%26OBJIDS%3D20016421%26backUrl%3D%252Fcontent%252Fview.do%26PREF%3DmaxOpageUt%253D200%253BmaxOpageC%253D10%253Btz%253DUS%252FPacific%253BmUnit%253Dinch%253BshowFilters%253Dtrue%253BsmtpFrom%253Dtrue%253BpromptForUnsavedData%253Dtrue%253B%26CONTAINERID%3D6424083%26backContext%3D%252FPlatformServices%26LOC%3Den%26APPKIND%3DInfoView%26PVL%3Den%26ACTID%3D280%26service%3Dtimeout&backUrlParents=1&appName=OpenDocument&prodName=BusinessObjects+Enterprise&cmsVisible=false&cms=<servername>%3A6600&authenticationVisible=false&authType=secEnterprise&sso=false&sm=true&smAuth=secLDAP&persistCookies=true&sessionCookie=true&useLogonToken=true
The instance Id for the report is generated successfully and the staus of the report is showing as success on Business Objects server side ie. crystal server side.
And we are using OpneDocumentURL for generating the report. And the in the URL we are passing the "Instatce ID" and the "Token" which Both are generated successfully.

Hi,
This is a crystal report link which i am trying to print.
The actual URL to generate a report is,
http://servername:port/OpenDocument/opendoc/openDocument.jsp?&iDocID=22874532&token=systemname%4022874531JOLS2B40fr7cuAE522874529JVB36Yr3PswjM7IP
but it is redirected to below URL,
http://servername:port/PlatformServices/service/app/logon.do?appKind=InfoView&service=%2FOpenDocument%2FappService.do&backContext=%2FOpenDocument&backUrl=%2Fopendoc%2FopenDocument.jsp%3FPREF%3DmaxOpageUt%253D200%253BmaxOpageC%253D10%253Btz%253DUS%252FPacific%253BmUnit%253Dinch%253BshowFilters%253Dtrue%253BsmtpFrom%253Dtrue%253BpromptForUnsavedData%253Dtrue%253B%26service%3Dtimeout%26CONTAINERID%3D21700595%26backContext%3D%252FPlatformServices%26ACTID%3D279%26OBJIDS%3D22874532%26SERVICE%3D%252FOpenDocument%252FappService.do%26APPKIND%3DInfoView%26LOC%3Den%26PVL%3Den%26backUrl%3D%252Fcontent%252Fview.do&backUrlParents=1&appName=OpenDocument&prodName=BusinessObjects+Enterprise&cmsVisible=false&cms=systemname&authenticationVisible=false&authType=secEnterprise&sso=false&sm=true&smAuth=secLDAP&persistCookies=true&sessionCookie=true&useLogonToken=true
-VinodC

Printing Problem in Crystal Report From JSP

Hi,
I m calling crystal report from JSP.Report is parameterized.I m passing parameters from JSP.Report is displaying on the page,but when I try to print or export the report by pressing Print or export Button ,it displays an error message "Some parameters are missing values".
Please guide my,what should I do? Following is the code.
Good Bye
AQ
Vector fieldVector = new Vector();
SPParameters spParams = new SPParameters();
ReportFactory     reportFactory = new ReportFactory();
// Setteing the report Name (Path Appended)
reportFactory.setReportName(ReportsCoreDataConstants.REPORT_PATH.concat("Test_Rep2.rpt"));
//Setting the parameters for the report
ParameterField paramFeilds = null;
System.out.println("fiscalYearCode:"+fiscalYearCode);
paramFeilds = spParams.createParams("IPFISCALCODE",fiscalYearCode);
paramFeilds.setReportName("");
fieldVector.add(paramFeilds);
//Creating the ReportSourceInstance
reportFactory.setFields(fieldVector);
String exp = "";
try {
     ReportFactory l_reportFactory=null;
     l_reportFactory = reportFactory;
     if (l_reportFactory != null) {
     CrystalReportViewer viewer = new CrystalReportViewer();
     viewer.setParameterFields(l_reportFactory.getFields());
     viewer.setOwnPage(true);
     viewer.setDisplayGroupTree(false);
     viewer.setHasZoomFactorList(false);
     viewer.setHasLogo(false);
     viewer.setHasPrintButton(true);
     viewer.setHasRefreshButton(true);
     viewer.setHasToggleGroupTreeButton(false);
     viewer.setHasViewList(false);
     viewer.setPrintMode(CrPrintMode.ACTIVEX);
     viewer.setSeparatePages(true);
     viewer.setEnableParameterPrompt(false);
     viewer.setReuseParameterValuesOnRefresh(true);
     viewer.setReportSource(l_reportFactory.createReport( request.getLocale() ));
     viewer.refresh();
     viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),out);
     viewer.dispose();
} catch(Exception e) {
     exp = e.toString();
     System.out.println("Exception in JSP : " + e.toString());
     e.printStackTrace();
}

I think ScreenRaghu is right. If you look at the generated source, your jsp becomes an action and processHttpRequest() method is invoked everytime some action happens. So when you click the export button, request object no longer has the values your report needs. Either put the values in session or via link or db or whatelse.

Printing the datas through Crystal Report from Java

How can I Print the datas through Crystal Report from java?

How can I Print the datas through Crystal Report from
java?
What the hell are "the datas"?
Jesus, I can understand this is a shrinking planet, Global community, and all that happy horse pucky. Typos or small grammar errors are no big deal, I make them all the time. But when I have to spend more time interpretting the question than figuring out the answer, it drives me crazy.

Print Message Report from Mobile

Hello...
We need modify standard mobile infrastructure java code...
We need print some report from Mobile Front-end.
Is possible to print all MESSAGE data that we can see from front-end of mobile infrastructure 2.5 ???
thank you very much
Stefano

I haven't really done much enhancements on MAM 2.5, but Im sure sami will let you know where to add the code, or you can review the MAM enhancement guide on the CD.
In regards to printing the PIOS API is pretty simple. If you are using a laptop to print to a normal printer then you can just use the Win32 Drivers..(installed via driver addon from web sap console.)If you are using the handheld you will need to find the appropriate drivers.
Here is some code I used in one of my applications:
 Connector conn = Connector.getInstance();
 DriverInfo[] driverInfo = conn.listDrivers(ConnectionType.PRINTER);
 PrinterParameters params = new PrinterParameters(driverInfo[0]);
 params.setPrinterMode(PrinterParameters.GRAPHIC_MODE);
 GraphicPrinter gp = (GraphicPrinter) conn.open(params);
 File myImage = new File("c:
smalllogo.bmp");
 if (myImage.exists()) {
 float x = 0;
 float y = 50;
 try {
 String[] sFonts =
 gp.getFontConfigurationManager().listFontNames();
 PrinterFont pf = gp.getFont(sFonts[0]);
 gp.drawText(
 pf,
 25,
 25,
 "TO For Delivery # = "
 + dbAccess.getItemFieldValue(arrayItems[0], "VBELN"),
 GraphicPrinter.NO_ROTATION);
 for (i = 0; i < arrayItems.length; i++) {
 gp.drawText(
 pf,
 25,
 y,
 "Delivery Item # = "
 + dbAccess.getItemFieldValue(
 arrayItems,
 "POSNR"),
 GraphicPrinter.NO_ROTATION);
 y = y + 10;
 gp.drawText(
 pf,
 25,
 y,
 "Material # = "
 + dbAccess.getItemFieldValue(
 arrayItems,
 "MATNR"),
 GraphicPrinter.NO_ROTATION);
 y = y + 10;
 gp.drawText(
 pf,
 25,
 y,
 "Quantity to Pick = "
 + dbAccess.getItemFieldValue(
 arrayItems,
 "LFIMG"),
 GraphicPrinter.NO_ROTATION);
 y = y + 25;
 gp.doPrint(1);
 gp.close();
 } catch (Throwable tFile) {
 tFile.printStackTrace();
 }
This should give you an idea, you should also read through the MDK documentation for the printer API (PIOS). Its quite easy to pick up and as long as you have the driver and connector installed it prints right away.(You could also use the Peripheral emulator in
NWDS to test the code first)
Hope this helps,
Wael..
Dont forget the rewards
Message was edited by: wael aoudi

Print crystal report without preview

Dear All,
i want print crystal report without preview.
when i click print button i want show printer list install in that computer.
so user can choose which printer that use to print. I means like if we printing document from office, we can choose the printer.
how that i can do that?
please help.
best regards,
Surbakti

Since this issue has little to do with sql server, I suggest you post your question to a forum for CR
SAP CR community

Can't view Crystal Reports from BW

Hi,
I'm installing SAP Integration Kit XI 3.1 SP3 with IIS. I am able to publish reports from BW to BOE but not able view them from BW. I followed the documentation to use report/report_view.aspx to define the viewer application in Content Administration Workbench. But it is giving me a "The page cannot be found" error when I try to view Crystal Reports from BW. I tried looking for the file report/report.aspx but cannot find it. I was able to locate the file in SAP_CrystalReport_View/report_view.aspx. I repointed the system to this path but it still giving me the same error.
Anybody here encountered this before?
Thanks,
Elijah

Hi Ingo,
- has the report being saved to BW and then published to BusinessObjects enterprise ?
    Yes, the report is being published from BW to BOE successfully.
- did you import the ABAP Transports to the BW system ?
    I imported all the transports that came with the Integration Kit. I'm not sure if the ABAP transport is one of them.
- has the viewing service in transaction SICF been configured ?
    Yes, the top entry in the handler list is /CRYSTAL/CL_BW_HTTP_HANDLER.
I did notice that the BW system is on a different subdomain than the web application server. For example,
   BW system        - bw01.us.mydomain.com
   BOE web server -   boweb.mydomain.com
Would that affect the single sign on?

Open a crystal report from WAD with passing the variables values

Hi,
I need to know is there any way to link SAP WAD to crystal reports (open a crystal report from WAD)and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
Maybe we need to pass parameter by WAD URL but this is just my assumption and have no idea how to do this with passing variable values.
right now I know the method of how Bex queries which are used as data source for crystal reports but in my current scenario we have the structure like this that bex queries link with WAD and then WAD is linked with crystal reports.
No doubt that Crystal report is target option in RRI but there the source is Bex Query only but in current scenario we are looking WAD (web template) as a source to crystal report or crystal report called in WAD.
Please suggest something on same.
Thanks
Take care
Vishal sharma

Hello Vishal.
Did you find a solution for this problem?
I'm facing right now the same problem, I need a way to link SAP WAD to crystal reports (open a crystal report from WAD) and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
Have found an answer to this issue? If yes, please kindly inform how have you solved this.
Best Regars
Armando Santos

Cannot refresh a stored procedure within a Crystal Report from Xcelsius

Please help...Xcelsius 2008 & Live Office problem...
What I am trying to do is to refresh a stored procedure that is within a Crystal report from within my Xcelsius dashboard in Preview mode. The data returned appears on the Xcelsius dashboard. It works fine in Design mode, just not in Preview or when published as a swf.
1. I set up a Crystal Report using a Stored Procedure as the data provider.
2. The Stored Procedure has a parameter built into it.
3. When the report is refreshed within Crystal, the prompt dialog box is displayed; I fill in the desired value, and run. Everything comes back fine.
4. Crystal Report is exported to the repository.
5. In Excel, I inserted the Crystal Report using Live Office. It shows up as a Live Office object just fine.
6. I bound an Excel cell to the prompt; when you change the value in the bound cell, the Live Office object refreshes and displays the correct results.
7. In Xcelsius, I imported the Excel spreadsheet.
8. I set up a Text component that is bound to the cell containing the parameter value. Also set up a Grid to display the results, and a Connection Refresh button to call the refresh. Added a Live Office Data Connection pointing to the Web Service URL for the report.
Note: When in Designer mode, if the value of the bound cell is changed, the results in the grid change accordingly.
9. When in Preview mode (or generated swf), if the Refresh button is pressed, a "User Identification" dialog box appears asking me to log on. The values it asks for are: System, User Name, Password, and Authentication. I enter the same credentials as are within the Live Office settings in Excel, (which are working correctly), but receive an error "soapenv:Server.generalException: Database logon failed.".
Note - all the id's are synced up - Business Objects, Database, etc.
I've tried all kinds of combinations, but nothing gets me past this error. If I use any other server than the one listed under System in Live Office, the error message is "soapenv:Server.generalException: Server XXXXX not found or server may be down".
I've noticed that in Excel directly, when I open the spreadsheet and refresh the Live Office object, I am prompted to log on to the database where the stored procedure is being executed. This dialog box does not appear once the Excel sheet has been imported into Xcelsius. One of the combinations I tried in the "User Identification" dialog box was the name of the database server, that didn't work either.
I also tried creating the Live Office object directly within the Excel spreadsheet in Xcelsius, but then I was unable to bind the prompt value. Could never get the Live Office/Properties menu to appear.
Ideas? Thoughts?
Thanks in advance!
Stephanie

This post looks like a duplicate of: Live Office: Database logon failed error

How to trigger crystal report from SAP ECC

Hi All,
I hope i m right forum to ask this question.
we want to do label printing from Crystal reports. data will be present in SAP ECC .
So I below issues
1 ) how to connect SAP ECC database with Crystal Reports.
2 ) how to trigger print output in Crystal reports from ECC , lets say I create a Delivery In ECC , the print output will be issued to Crystal report and I should get a print out Immediately ( for printing - printer will be connected to local system and SAP network printer ) .
I have worked with this type of scenario in smarforms , adobeforms. but not with Crystal Reports ...
Regards
Yashpal Gupta.

Hi Yashpal,
First thing you need to do is install the Connector on both your work station where you run Crystal Reports as well as the SAP Server where the data is.
So I moved your post to the SAP Integration Kit forum.
Need to know what version of Crystal Reports you are using?
Search of browse here, lots of info on how to...
Thanks
Don

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

Crystal report from JSP using the JRC

Hi, I am trying to call crystal report from JSP using the JRC.
But i am getting the Error as 'Logon Failed'. my web.xml entry is
<env-entry>
<env-entry-name>jdbc/Test</env-entry-name>
<env-entry-value>!oracle.jdbc.driver.OracleDriver!jdbc:oracle:thin:{userid}/{password}@//10.0.0.1:1521/TestDB</env-entry-value>
<env-entry-type>java.lang.String</env-entry-type>
</env-entry>
i am setting the userid and password in the code. Please see the below code for your reference. Please help me to solve the issue.
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ page import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSourceFactory2" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource" %>
<%@ page import="com.crystaldecisions.reports.reportengineinterface.JPEReportSource" %>
<html>
<head>
<title>Crystal Report with Database Logon information</title> </head>
<body bgcolor="#ffffff">
<%
try
String report = "/TEMPLATE.rpt";
IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
JPEReportSource reportSource = (JPEReportSource) rptSrcFactory.createReportSource(report, request.getLocale());
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setReportSource(reportSource);
viewer.setHasRefreshButton(true);
IConnectionInfo newConnInfo = new ConnectionInfo();
newConnInfo.setUserName("TEST");
newConnInfo.setPassword("TEST");
ConnectionInfos newConnInfos = new ConnectionInfos();
newConnInfos.add(newConnInfo);
viewer.setDatabaseLogonInfos(newConnInfos);
viewer.setEnableLogonPrompt(false);
viewer.setOwnPage(true);
viewer.setOwnForm(true);
out.println("Connection Information: "+viewer.getDatabaseLogonInfos().getConnectionInfo(0).getAttributes().toString());
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),null);
viewer.dispose();
catch(Exception e)
throw new JspException( e);
%>
</body>
</html>

I never really had much luck with this approach.
Mind you I was using Crystal Reports 10, and as far as I recall it didn't allow setting/changing of database at this level.
Things to check
- can you create a database connection on your page with this URL/username/password?
- what server are you using? Tomcat? WebLogic?
I found this in your other post:
Connection Information: {Server Name=ee6rpt, Connection String=DSN=s(ee6rpt);User ID=s(ee62test);Password=;UseDSNProperties=b(false), Database Name=, Database DLL=crdb_odbc.dll}That would indicate it is using odbc to connect to the database (crdb_odbc.dll). ODBC is a bad idea with java.
The way I have got it to work for me (after much trial and error) was to in Crystal Reports to connect using the Oracle Driver, and specifying a tnsname - eg define REPORT_DS in tnsnames.ora.
When running through the JRC, it looked for a JNDI datasource under that same name "REPORT_DS".
Don't know if that will help you or not.
Good luck,
evnafets

Printing Crystal report from web

Similar Messages

Maybe you are looking for