Printing fixed number of Invoice Line in rtf template with level two group

Hi,
I have to print fixed number of invoice lines on a page. Invoce tempalte design has a table with header and summary(Invoice , tax and shiping totals) at each page in table footer. The table should repeate at each page with header and footer. I need to print specific number of rows or number of rows wihich page can accumulate in table body on each page.
I checked few blogs giving solution for fixed number of rows printing say
"Anatomy of a Template I - Fixed Row Enumeration"(http://blogs.oracle.com/xmlpublisher/2007/03/27/)
and
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Above two blogs explanation has only one group at line level. but in my case there are two groups (Parent and child) at line level. I am able to count rows in parent group but it is not counting lines in child group.
Edited by: Bhanu Yadav on Apr 19, 2011 2:10 AM

Will it be possible for you to move the 1st and 3rd sections to header/footer?
So that if the 2nd section spills over to next page too, starting position of 3rd section wont be affected.

Similar Messages

How to print multiple footers for each page in RTF template xml report.

Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.

You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here.

When I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.''

Basic question, how to create rtf template with a given xml file

Hello guys
I am new to BI publisher and I am learning how to create rtf templates using given xml fiel definitions by following the bi publisher guide
The steps I am following is:
1, create template using template builders, which is downloaded into MS words.
2, In the empty template, map the xml columns with template field using BI publisher tag
3, upload the template to BI Publisher as a layout.
That's all I can understand.
My question is:
1,in which above step do I import XML file into template builder (if not bi publisher), how to do so?
2,After template is created, how to associate this template layout with existing reports in BI Publisher, or is it necessary at all?
3,In the template content in MS Word template builder, what should I enter other than BI publisher tags for mapping XML field to desired template field
Or, if my understand of this process is entirely wrong, what's the right process of creating rtf template with a given XML file definition
Thanks

If you have a BI Publisher desktop installed, have a look a the demos,.. should answer most of your basic questions.
(Windows) Start->Programs->Oracle BI Publisher Desktop->Demos
Invoice Demo - good one for those with E-Business Suite
Report Demo - Sample using BI Publisher

PA_CONTRACT_XSLFO: How to invoke a RTF-template with related data template

Dear Reader,
actually I want to extend the standard Document Type Layout for a Purchase Agreement Contract with additional data from approved supplier list (ASL).
Therefor I have created a RTF-template and a data template with the needed sql-statement. For testing I put this in a standalone concurrent programm and it works fine (result was a blue table with all data rows).
Next step for me was to invoke the RTF-template into the PA_CONTRACT_XSLFO template for extending the Document Type Layout for my Purchase Agreement Contract. So I put the neede invoke-statements
<xsl:import href="xdo://XXOC.XX_RTF_TEMPLATE.de.00/"/>
and
<xsl:call-template name="XX_RTF_TEMPLATE"/>
into the XSLFO-template. Also I extend the RTF-template with the define template statement
<?template:XX_RTF_TEMPLATE?>
So all seems to be fine.
As result I get the standard document for Purchase Agreement Contract with the additional blue table from RTF-template BUT WITHOUT DATA !
From my point of view there is no execution of the sql-statement in data template. But I dont know why.
Do Oracle support a combination of XSLFO-template with data template?
[XSLFO-template] with related [XSD-data definition]
calls [RTF-template] with related [data template (with included sql-statement)]
Thanks for your help.
Best regards
Mario.

How to call a rtf template from another rtf template by passing a value try in main template create hyperlink of url with parameters for another template
http://bipconsulting.blogspot.ru/2010/02/drill-down-to-detail-or-another-report.html
When user pull a quote report from siebel this new rtf template should attach to the quote at the end.it'll be only another report
IMHO you can not attach it to main. it'll be second independent report
you can try subtemplate but it's not about rtf from rtf by click
it's about call automatically rtf subtemplate from main rtf based on some conditions
for example, main template contain some data and if some condition is true then call subtemplate and place it instead of its condition

Problem with Cross-tab report (RTF Template) null values, current-group()

Hi, experts!
I generate Cross-tab report using RTF Tamlpate and I have problem with grouping.
My XML file have to be with one group only because I want to using dynamic regrouping inside the RTF template.
Here is my data structure (XML file):(Look the images for details)
http://img156.imageshack.us/img156/3997/xmlstructureay9.jpg
=======================
WITH GROUPS
=======================
Here is my RTF template:
http://img151.imageshack.us/img151/2951/resultcrosstabbycustomehf8.jpg
When I'm using grouping and I want to have for each group cross-tab report I have the following problem: (Look the images for details)
http://img156.imageshack.us/img156/8786/resultcrosstabbycustomect9.jpg
And this is my code I'm using inside the RTF template with groups:(Look the images for details)
http://img156.imageshack.us/img156/4253/fieldbrowserxb7.jpg
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=======================
WITHOUT GROUPS
=======================
Here is my RTF template:
http://img151.imageshack.us/img151/9545/resultcrosstabwithoutgrzg7.jpg
When I generate one cross-tab there is no problem: (Look the images for details)
http://img156.imageshack.us/img156/7030/resultcrosstabwithoutgrsr1.jpg
This is my code I'm using inside the RTF template WITHOUT groups:(Look the images for details)
http://img151.imageshack.us/img151/7030/fieldbrowserwithoutgrours8.jpg
Can someone give me a hand to deal with this?
Thank you!

Pitson,
better to ask this question in the BI Publisher Forum than here in the Oracle Reports Forum:
BI Publisher
Regards
Rainer

Suppress Blank Lines in RTF Template

We are using <?if:count(current-group()[FIELD=$VARIABLE])?> in order to restrict data in a pivot table cell.
The pivot table cell uses @cell:top XML level to produce fixed number of columns.
There are two for-each-groups in the cell under the @cell tag.
Using <?if:count(current-group()[FIELD=$VARIABLE])?> works fine to restrict data but there are many extra blank lines creating bad formatting. This is because the two for-each-groups under the @cell tag. Those groups get the correct data but since @cell is at the top node of the XML the for-each-groups are repeating too many times and creating the blank lines.
Is there a way to suppress blank lines in an RTF template?

I've already tried that and the results are the same. The blank spaces still exist. I even tried using that right after the for-each-groups that are under the @cell tag. No difference.
Can I please send you the RTF template and XML? And two PDF files, one that shows the empty line spaces and one that shows correct formatting (without fixed number of columns).
Thank you very much.

Printing Chinese characters in XML Publisher - using RTF Template

Hi All,
I have to build RTF template for invoices report.
When i run the report for US/UK operating units , it is working fine. But when i run the report for China invoice. Chinese characters were displaying like ?????
Can any one help me how to fix this?? it is urgent issue...
Thanks,
MG

Pl post details of OS, database and EBS versions, along with the database characterset.
Are you creating PDF output ? Can you print Chinese characters when using US/UK operating units ? Are you using Pasta ?
How to Generate PDF Output With UTF8 in R12? [ID 778970.1]
HTH
Srini

Problem in .rtf template with 2 dimensions in rows section

There is a problem with standard .rtf template: if we select two dimensions in rows, table header (with months) moves left to the position of the second column of row dimension like there is only one dimension in rows (i tested even with 4 dimension in rows, header still starts from the position of the second column of row dimension), in any case default template acts like there is only one dimension in a rows section when a report is being formed, if anybody has already faced that problem maybe you could share an advice to fix it?
p.s. We usually use 1 and 2 dimension in rows

i have a suggestion that there is a problem with colspan parameter in xml file that is built when HP starts creating pdf report, could anybody advise where i can find this xml that is used for creating report?
Edited by: s0uLr1pPeR on 18.05.2012 16:31

Multiple images in rtf template with out using url conditions

Just iam taken 3 logos from system to make copy and paste in rtf file
But i need to write the conditions for those logos depend upon ord_id (or) supplier_name?
How can i write condition by taking the if/when between logos
Any one knows pls replay this (or) send to my mail id "[email protected]"
Thanks and Regards,
Basha

Hi Tim,
We have logged SR 5803815.992, and uploaded the RTF template and a sample XML data file.
We are currently on 11.5.10 CU2 and 11i.XDO.H
Please let us know if you need any other information.
Thanks

Printing dashed or dotted plot lines of a cnigraph with VC6

Hi,
I have a problem with printing dashed or dotted linesof a CNiGraph with VC++. The lines are always printed solid. As posted in other threads I set the line width to 0 and use ControlImageEx to get the CNiPicture but it doesn't work. Please help...
Thanks a lot
Stefan

Dear Stefan,
could you post your project? I could try to reproduce the issue with that ...
Best regards
Philipp R.

Is it possible that 1 RTF template with 1 xml file produces many PDF files

Hello,
We are using XML publisher with eBS.
As part of it, we've got treatments that generate invoices.
One treatment produces 1 big XML file with many invoices in it.
Currently, this big XML file generates one big PDF file with all the invoices.
I'd like to know if it's possible to keep the big XML file (with many invoices), and instead, generate 1 PDF file per invoice ?
Basically we would like to split the big PDF file into small PDF, one PDF file per invoice .
If it's possible, then, how can we do it ?
I hope my explanation is clear.
Thanks in advance for your help,
Olivier

Have you tried the BI publisher bursting feature?
Take a look at this:
http://www.strsoftware.com/wp-content/uploads/2011/09/Oracle-EBS-and-BI-Publisher-Report-Creation-Bursting-and-Delivery.pdf
http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html
Thanks,
Bipuser

How to display fixed number of rows on rtf file

Hi everyone,
I have the following requirement. The pdf output should have fixed number of 33 lines in a group by. The rows in group by can vary for each group . For eg: If a group has 3 rows , the pdf output should print 3 lines and 30 empty lines, and if group has 2 lines, the out put should print 31 emty lines.
can anyone please help me with this requirement?
Thanks
Sunny

Take a look at this blog post: http://blogs.oracle.com/xmlpublisher/entry/anatomy_of_a_template_i_fixed
Thanks,
Bipuser

Print Quote the report is in PDF but need to be new RTF template

We have 11.5.10 apps, the Quote screen is an OAF screen.
When clicking Print Quote the report is in PDF, They want to include a new RTF template for printing instead of PDF.
The new RTF template is created. But what I do not know is how the quote screen will take the new template. I can use XMLP to upload the RTF template but that may not be sufficient to make it appear in the Quote screen.
I am looking at the profile ASO:Default Layout Template. Am I headed the right way?

Hi,
Please refer to the following documents, it should be helpful.
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1
Regards,
Hussein

New RTF Template for Quote Print

Hi,
Oracle has provided only XSL Template for Quote Printing. Since Client needs his own format of Quote Printing, Can we create a new Customized RTF template for Quote Printing? or Is there any easy way to do customize the XSL Template?
Pls advise..
Thanks in advance,
Regards,
Muru
Message was edited by:
Muru

Hi Miru,
I need ur help.I am working on the same customization of xsl template.can u please guide me through how to work with this.
I need to customize print quote report
Can u please tell me the link/steps how to customize the jsp form to replace the standard CP with custom one
Secondaly,which one option is better ,creating a new rtf/modifying the existing xsl
and how ?as i dont have any idea about xsl.but i know creatig rtf's
Please guide me thru.
Thanks a ton in advance
kaur

Printing fixed number of Invoice Line in rtf template with level two group

Similar Messages

Maybe you are looking for