Printing from Lightroom (CCS) on a PC and my skin tones are coming out a lot redder than they should.

I am printing from lightroom on an Epson Stylus Pro R2880 on my PC.
Overall, my colors have been fine. Not perfect, but good enough for what I'm doing.
But, I have noticed that my skin tones are coming out extremely red/pink.
1) How do I fix this?
2) How do I optimize my colors so that my prints come out as close as possible to what my computer shows me?
Thanks!

Hi there!
It's a known problem. I solved it by going through an advanced profiling method. I described it here in detail: ColorChecker: How to get PERFECT skin colors with every camera - Hans van Eijsden Photography
Warning: advanced stuff. But once you got it covered and once you calibrated your printer, it's a big time saver. Good luck.
-Hans

Similar Messages

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

Printing from Lightroom = bad, From CS3 = Perfect.

OK, before you flame me I am sure this has been asked before but I tried looking threw the search engine and nothing came up that was directly related to my issue.
Specs:
Vista Ultimate
Lightroom (Latest version)
Photoshop CS3 (Latest version)
iP6700D Canon printer (Newest drivers)
When I print from Lightroom the pictures look dark and dull. When I print from CS3 using sRGB IEC61966-2.1 they look perfect. I want to try printing from Lightroom using this profile but when I click "MORE" to select other profiles in LR, it is not there.
I am a printer noob as I just got this printer and have always had pics developed for me before this.
Any suggestions on how I can get the same quality from LR as I do from CS3?
Thanks !!

Thanks both for your help. I was able to make the picture come out exactly the same in Lightroom as it did in CS3.
The interesting this is that when I selected the specific profile for the paper, the image came out very red but when I just selected the "Canon IJ Color Printer Profile 2005" it came out great.
I put together a quick visual comparison to show the difference at the following link: http://img180.imageshack.us/img180/4458/printingresultscopyvg1.jpg
Weird eh? I have a Spyder 2 that I use to calibrate my monitor so I know that is not the cause, and it looks fine in the other pics. A little light but that's my fault lol.
Thanks again, I think I am good to go from here, unless you have anything else you think I should know. You have been a great help.

Hello, I am trying to print from Lightroom on my Epson 2400.

The photos are coming out much much darker than than on screen. Any suggestions??

Look under "More like this " on the right, where you will see an item titled "Printed Images appear darker" - the information here might help. If it doesn't, other items here might be more relevant.

MY photosmart B 210 is not printing with the black ink at all. Pages are coming out blank

Print report says ink is low in the colours but they do appear on the sheet but no black ink at all
It is a relatively new cartridge and genuine HP ink. Stopped suddenly
Pages from print or copy are coming out blank.
Tried to clean print heads and it says
Print System Failure : Oxc19a0003
and tells me to switch printer off and back on which I have now tried but getting the same message!
What does this mean?

Hi @BrendaMC,
Welcome to the HP Forums!
I noticed that your HP Photosmart B210 printer is not printing black ink, and that the pages are coming out blank. I am sorry to hear this, but happy to help!
I would suggest to go through the following guides:
Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart Plus e-All-in....
'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M....
Ink Usage in Inkjet Printers.
Hope these guides are helpful, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printing from Aperture, and printing from Lightroom.

Hello,
I have noticed when I print from Aperture using my Canon i9950 and a custom paper Colorsync profile, and if I then print from Adobe's Lightroom using the same Colorsync profile and paper, the print from Lightroom is much sharper. The Aperture print is exact in every respect except it is noticeably softer.
Anyone else notice this? And if so is this a recognised problem that may be fixed in 1.1?
Kind regards,
Anil K Solanki
G4 Dual 867 Mac OS X (10.4.5)

Hi Charles, I totally agree with you. Lightroom's printing features are really excellent. In comparison Aperture almost seems like the printing of photographs was something the Aperture dev team bolted on at the last minute.
I sincerely hope Apple sort out, what for me is inexcusable in a professional commercial app. A few photographers I know are going to use the next release of Aperture as a turning point, if it can't print as good as the Beta Lightroom then they will become Lightroom users and say good bye to Aperture.
Apertures sorting and logging tools really are second to none, but if the print quality is poor, what is the point. I know for a large number of photographers, producing prints is not high on their list of needs, especially if they are supplying prints for publication or the web. But if I want to do what my old fashioned enlarger can do, which is create great prints, then hey I am not going to get it with Aperture.
I know Apple can fix this, I just hope they do.
Anil.

Printing from Lightroom (2.5 - 3) into Adobe Acrobat 9

I just wanted to post that I have been searching for an answer about errors when printing from Lightroom to Acrobat. When I went to Win7 64 bit Professional and CS5 Design Premium two weks ago - all the problems started.
Looking at the forums - I found several others with similar problems in a 64 bit environment. I tried their suggestions and none helped. I called Adobe this past week and spent 3 hrs on the phone to be told they didn't have a solution but would get back with me (one can only hope). I upgraded to Lightroom 3 hoping that would solve it and it has not.
When collecting images and going to Print, then printing into Acrobat as a 2/2 cell contact sheet, no images are embedded. In Lightroom 3, a clean sheet appears. Has anyone else experienced this? Even when using a new tiny catalog, the same result occurs.
I am running a PC with quad processor, 4 Gigs of RAM, NVidia graphics card that is two years old - all newest drivers for 64 bit. SATA drives, dedicated scratch disk... etc.
The catalog is new and tiny.
The images are small for testing purposes (only about 6 at 300 dpi).
Luckily, I can do a work-around using Bridge but I use Lightroom for processisng photos and sending contact sheets to clients and need this function. Any help would be much appreciated. If you are having the same problem, please call Adobe and report it.

Ok, I've run some tests: files with full native Canon 30D images (RAW) that had been edited in LR 3 and followed the set up given by Adobe. It failed. Some of the pics came in and retained their file names and some showed just file names and blanks for the pic space. Ok, I'll run more tests and come back to this.
I tend to edit, make JPGs (6 x 4 at 300dpi) and then import those and set up the contact sheet. Running full bore - as explained above, it doesn't work.I'll try multiple JPGs to see if that works.
I'll go back into discussions with Adobe. Their support page is convoluted and expensive. I began under the upgrade of CS5 and Lightroom 3. I'll try again.
I do recommend, if possible, that you edit/resize and control your resolution (I set up the printer box in LR for 200 dpi) and then make your contact sheets as per their instructions. You also might try limiting how many sheets your make to see how that works. Create one sheet, then two, etc. so you can see where the cutoff is for your system. I'm afraid some of this may be hardware and how much info you are asking to be transferred from LR to the PDF.
It is very odd that some are coming in and some are not. There is definitely something flaky in Lightroom to Acrobat. I suspect the coding may not be set up to handle 64 bit and that's why it's failing. As far as I know, the only software that is full 64 bit, at present, if Photoshop. The others are running under the 32 bit environment within a 64 bit OS of Win7.
Is this not true?

Color shift printing from Lightroom 1.3

Windows Vista, HP officejet Pro L7580 printer, Lightroom 1.3, Photoshop CS3. All that being said and having used Photoshop since ver 5 with a variety of printers I find myself stumped with my latest soup of hardware and software. Screen colors do not print out anywhere close on paper when I try to print from Lightroom. Move the file over via "edit in Photoshop" and print from there and everything is fine. In Photoshop, whether Photoshop or the printer controls the color there is no problem. In Lightroom, however I have no control that I can find. I have no additional profiles so the printer controls the color. Photoshop and the printer are both set to AdobeRGB1998.icc. Other then just printing from Photoshop what am I missing in Lightroom?
By the way Adobe, in the future think about either Lightroom or Bridge but not both.

Hi,
Just a reminder for those who missed that thread (I guess this fix also
applies to LR 1 although I didn't check):
[FIX] Darker prints and color shifts when printing from Lightroom 2
(this is for Windows - Mac users please look here for a similar fix:
http://www.computer-darkroom.com/lr_13_print/lightroom_print.htm )
The problem :
When printing RAW or TIFF files from LR2, you get a printer output that
is much darker than it should be and that presents various color shifts.
I'm using an Epson Stylus Pro 3800 with the latest Windows driver
(6.50 - which is rather old by the way). The workaround described below
works for me under Windows XP SP3. It should also probably work with
other systems/printers/drivers. Use at your own (minor) risk.
The "official" procedure for printing from LR is as follows:
1. Do not let the printer manage colors and select "Other..." from the
profile dropdown list and select the ICC/ICM paper/printer profile that
you want to use.
2. Click on Print... in LR which opens the Print Settings dialog.
3. Select the options you need and the paper you're using.
4. *Disable the color management from the driver's side* (in Epson's
drivers, "Mode | Custom | No Color Adjustments").
5. Print
Unfortunately, *this doesn't work* for many of us and this produces a
print that is dark and has color shifts as mentioned above. Note that
the same image prints correctly from QImage or Photoshop CS3 (that is,
the printer output corresponds to what you see on your calibrated
display).
Apparently, although color management has been (allegedly) disabled in
the driver, there's something wrong between LR and the driver which
makes that both LR and the driver are still trying to manage colors. In
other words, the "No Color Adjustements" option of the driver doesn't
seem to work with LR.
The workaround (found after hours of hair pulling and paper and
expensive ink wasting):
In step #4,
1. Instead of selecting "No Color Adjustments", set Mode to "Custom |
ICM
2. Click Advanced...
3. Check "Show all profiles".
4. Select Driver ICM (Advanced)"
5. Set *both* the "Input profile" and the "Printer profile" fields to
the very same profile that you specified in LR.
That is, if you specified Pro38 PGPP (Premium Glossy Photo Paper) in LR,
then also select Pro38 PGPP in both "Input Profile" and "Printer
Profile". This has actually the same effect has disabling color
management in the driver (what "No Color Adjustements" should normally
take care of).
That's it. When printing, you'll get exactly the same color results as
when printing from QImage or Photoshop. No more dark prints. No more
color shifts.
One might think that the bug is in the Epson driver but in that case,
QImage would have the very same problem. So I tend to think that the bug
is on the Lightroom side.
Hope this helps.
Patrick

Printing from Lightroom

I've recently upgraded to MAC OS 10.5.8 from 10.4.10
I'm printing from Lightroom to the Epson 3800. Using Lightroom 2.5
This is something I noticed since the upgrade.
In the Print Setting dialog box in Lightroom, under "color matching" which was greyed out in the previous OS, I now have 2 options. 1. Colorsync or EPSON color control. If I choose Colorsync, I can choose a profile or leave it as Automatic. (see screenshot)
My question. Is this a bug in Lightroom or the Leopard OS?
And if it's not a bug, what do I choose.

Leopard includes significant changes to the printing pipeline. The options you mention are just the tip of the iceberg and have caused much confusion in the past. What you see isn't a bug in Lightroom, and can be ignored. See the following tutorial for more info on printing in Leopard and Lightroom http://www.computer-darkroom.com/lr2_print/lr2-print.htm

Lightroom 4 launches to Photoshop CS5 when I try to print from Lightroom. How do I change it

Lightroom 4 launches to Photoshop CS5 when I try to print from Lightroom. How do I change it, so the printing goes directly from Lightroom to the printer.

MartyOretsky wrote:
Let me try again. I am in Lightroom and click print. Then I am launched to PS.
This is not possible.
What you are seeing is not PS, it's your printer dialog. PS does not have an ICM button.
And you say: " Lightroom doesn't stop working; rather CS5 stops working"
And what does the error message say that you posted in the screen shot? Does it not say "Adobe Photoshop Lightroom has stopped working" ?
Do not be confused. Adobe Photoshop Lightroom is the official name of Lightroom. This is not CS5 that has stopped working. CS5 does not come on when you hit the print button in Lr.
It is Lr that has stopped working.
And you say: "My next step is to click on ICM so the color controls are done by the software."
This is wrong. When you want Lr to do the color management, you select a profile in the Print Module, in the <Print Job> panel under Color Management / Profile.
In the screen shot below I have selected a profile for my HP printer and paper. And that's where you select a profile for your printer and paper.
You do not click on ICM in your printer dialog. You click there only when you want your printer to manage colors.
So try to print by selecting the profile in the print Module as indicated and do not click on ICM.
By the way: Which OS? Are you on a Mac?

How to print from Lightroom 5 to Canon pro-100?

When I go to print from Lightroom, the colors on my screen look exactly as I want them. Then I have the color management set to Canon Pro-100 with the type of paper I am using (pro-luster), but when I get the printer setup on my screen, I get different colors (ugly colors). I then print the picture, and I get the same colors that were on my screen for the printer setup (the ugly colors).
how do I set it up that colors will be managed by Lightroom? which option do I select when under the Profile section?
Thanks

I have the same printer, and get excellent results from it. You have two choices; you can either allow Lightroom to manage the color, or you can let the printer manage the color. You don't want both the printer and Lightroom managing the color. If that happens you get bad colors.
To allow Lightroom to manage the color you need to go into the page setup, which opens your printer driver and you need to turn off color management. You also need to set the paper size and paper type based on the profile you are using. There are usually instructions packaged with paper indicating what settings you should choose. After you have set everything appropriately in the printer driver you need to select the appropriate paper profile from the list available to you in Lightroom.
To allow the printer to manage the color, you choose that option in Lightroom. Then in the page setup you need to choose the paper type as well as the exact paper profile that you will be using.

Prints from Lightroom darker then from PS CC

I normally print from Lightroom using profiles created with a Spyder Print on an Epson stylus pro 4880 using Brilliant Lustre paper. My monitor is calibrated at 120cd/m2. Color management in the printer driver is off. All settings are correct (at least I checked them several times and found no error). The Softproof using the appropriate profile does look OK. However, my prints are always darker then the Softproof.
Now I printed the same image from PS CC using the same settings as in Lightroom and the print was OK and matched the Softproof.
Does anyone have a clue what is the reason for the difference between Lightroom and PS?

@JIm Nice to hear that your prints match your soft proof very well. However, this does not mean that all profile under all permutations work well. And no, I did not overlook anything. I know my color management settings in LR and an my printer drivers very well.
@Bob The Canson profile generated with a x-rite work on my system. The profiles generated with datacolor hard- and software print too dark. My monitor calibration is as supposed (120cd/m2, 6500K and a gamma of 2.2). In any case this would not explain why some profiles seem to work while other don't. I am familiar with e.g. Keith's articles: Why are my prints too dark

Dark prints from lightroom

I cannot find a solution to my problem anywhere else so I hope someone here can help me.
When I print from lightroom all my prints come out too dark. When printing from photoshop cs3 or the windows picture viewer the prints are fine. I am printing on a kodak easyshare5500. The printer driver does not allow color management to be turned off, it offers 2 color space options and I have tried both with no success.
Does anyone have a suggestion on how to improve my prints from lightroom.

Hi Jason,
I have only two suggestions for you:
1. From Lightroom Open in Photoshop CS3 and print from there. ( a bit of a nuisance, but less of a nuisance than a ruined print and yet another wasted sheet of paper.)
2. I do not know the Kodak easyshare5500 printer or the size that it can print. Make and save a few copies of your pictures from Lightroom with different values on the exposure slider. Then print them all on one sheet and pick the one that looks best. That will also work for your next print too. I always find that my Canon printer tends to print a good bit darker than what I see on screen, so I have got into the habit of boosting exposure before printing. (and that is with a calibrated monitor etc etc etc.)

Printing from Lightroom 3

I have a HP Color Laser 2840 printer. When I try to print from Lightroom 3 it dosen't work. I get the ballon at the bottom of the screen telling me the document failed to print. I have to go into the print que and delete the job. All my other programs print fine as long as I don't try to print from Lightroom. They also print fine once I delete the Lightroom document.

XP Pro, SP3, 2 gigs RAM, 200+ gig free disk space. Sometimes I get a "49 error" on the printer panel, not always. I'm also getting a
'Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches" error but I've assumed this was a seperate issue". I believe the "49 error" on the printer is a memory error and I beleive the "preview cache" error is also memory. So maybe they are related?

Cannot print from lightroom

cannot print from lightroom, print is white (background) browserpreview is white browser window shows image
ecdo

I think we need a little more information. What do you mean by browser preview is white and browser window shows image? Are you talking about the Lightroom window? What module are you looking at? I have Windows 7 (but Home Premium) 32-bit, 4 GB RAM, and I don't have any problem printing from Lightroom 4.2. I have never encountered printing problems with previous versions either. Oh, what printer are you using? The more information you can give us, the more likely it is that we will be able to help you.

Printing from Lightroom (CCS) on a PC and my skin tones are coming out a lot redder than they should.

Similar Messages

Maybe you are looking for