Printing issues with color mgmt on a HP 7180 photosmart printer - Can you help?

I've been have an ongoing issue with my Adobe Elements 6.0 and printing my pictures off a HP7180.  The colors don't match what I see on the monitor as well what's on my camera.  I can send the pictures to KodakEasyshare online and the pictures come back with the same colors as to what I see within my application and monitor.  I've run test pages off my printer and everything is good.  Help me, PLEASE.

I've tried printing from both the catalog and the editor screen and I've fooled around with the color mgmt.  The printing is still off.  The colors are vibrant from what I can see and when it prints it's not as sharp and the colors tend to be dull or maybe leaning towards more green/blue sometimes even more reddish - orange.  I've taken the liberty and reseted the printer to factory defaults on the hardware and on the pc...It's till giving me this problem.  What's amazing is I can print from Kodakgallery software, photoalbum 3.2 from adobe and the colors are some what true to color.  I can't get it to print right with elements.

Similar Messages

  • Printing a document but the message says printer is off line even though i downloaded the latest driver, can you help?

    the message in the printing window says your printer is offline,the printer is not connected i'm using a direct line to my imac , can you help please?

    Hello:
    This article will help, I think.
    http://support.apple.com/kb/PH11143
    Barry

  • IPod Classic will only sync with iTunes 11.0.2.26 in disk mode - can you help?

    Hello, I am running Windows 8 64 bit with iTunes 11.0.2.26.  This is a new PC and this is the first time I have tried to use it with my iPod.  My iPod classic does not show up in Windows or in iTunes.  The only way I have been able to sync anything is in disk mode.  When syncing in disk mode the iPod appears in Windows and then disappears again when it ihas finished. 
    I have tried removing and reinstalling iTunes, but this has not sorted out the problem.  The iPod device troubleshooter can not see the device.  I have tried several different usb slots and two different sync cables.  I can not see the iPod in device manager.
    My iPod model is MB565 version 2.0.1 PC.
    I would like to be able to sync my device as normal and to see if there are any updates available for my iPod classic, which as iTunes currently can't see the device, is not possible.
    Can anyone help please?
    Many thanks!

    Well I finally figured out the problem, not thanks to anyone from Apple for that matter. You would asume this problem has happened before and is still happening. The problem was I couldn't copy certain songs anymore from iTunes to my iPod Classic. When trying to copy certain songs I got an error.
    If you have this problem it means your song file is corrupted. You can simply check this by trying to copy it from your hard drive to an external hard drive. Here you will also get an error message.
    This means you need to replace all the corrupted files by a back up on your hard drive or download it again. I did this and now everything works fine.
    Hope this will solve a lot of problems.

  • My screen, this morning opened but with all the icones in "flou"allover the screen can you help me ?

    My screen, this morning opened with a lot of icones all over in floues and multiplied by 10 or more, what is happening could you help me please ?
    Mon ordinateur , un Imac G5 processeur 10.4.11, s'est ouvert ce matin avec un écran rempli d'icones en flou, si je clique sur une application, elle s'ouvre mais tout est illisible, pouvez-vous m'aider, merci ?

    First of all, have you shut down your computer and tried to reset the PRAM.?  Then try booting from your install disc and run
    Disk Utility
       1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
       3. Click the First Aid tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Click Repair. Disk Utility checks and repairs the disk.
    Please post back and let us know jow it went...

  • How to deal with xsd:dateTime from webservice in ADF? (Frank can you help?)

    I have a webservice that returns a date in the yyyy-MM-dd'T'HH:mm:ss.SSSZ format (as far as i know the default Calendar type format) specified by an xsd:dateTime. When i generate a webservice datacontrol on the service i get an entry like <Attribute Name="testDate" IsUpdateable="0" Type="java.util.Date" /> in the datacontrol xml file generated for the service (should that not be a java.util.Calendar type?). When i try to output the value on a jsf page it results in the following error:
    oracle.jbo.domain.DataCreationException: JBO-25009: Can not create object of type java.util.Date with value 1994-02-01T00:00:00.000+01:00
    As far as i understand adf tries to create a java.util.Date object from the webservice output 'string' which fails. The webservice is a plsql webservice generated with jdeveloper. If i change the type in the datacontrol xml file from java.util.Date to java.lang.String it prints out the entire date string but i would like to keep it a date type to be able to format the output to the dd-MM-yyyy pattern.
    Any help or suggestions.....?
    Kind Regards,
    Andre Jochems
    Repost
    Repost

    Andre,
    sorry, for not replying earlier - missed this post obviously. I don't know whether or not the behavior you see is correct or a bug - need to investigate this first (or find somebody to invest).
    However, as a work around for now you can:
    Option 1: bind the UI component to a managed bean that then accesses the binding layer to access the Web Service Data Control. This way you can work with Strings and just create a java.util.Date object for the component using the SimpleDate formatter
    Option 2: Use a Web Service proxy and a JavaBean DataControl to access the proxy. This allows pre-processing of the Web Service response, e.g. handling the Date
    Note that this is just for possible work around until I find the time to look at this. However, if this is a blocking issue for a production application then I suggest to contact customer support for immediate help
    Frank

  • TS3899 I HAVE IPAD AIR HAVING PROBLEMS WITH EMAIL DELETING AFTER A SHORT TIME WITHOUT COMMAND CAN YOU HELP

    Q. I have an IPAD air having problems with my email deleting after a short while without command.

    I've had issues like this before.
    I ended up having to call my provide to reset the connection, which worked for a while, then quit. i then took it into my provider for a new sim card and had the connection re-established again. I haven't had issues since.
    hopefully for you resetting the connection with your provider will do the trick and a new SIM card wont be nessesary.

  • HT201363 hello,I have a problem with security questions.i don't remember the answer. can you help me please

    hello,I have a problem with security questions.i don't remember the answer,please help me. i don't know how to manage this

    You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (104775)

  • I have problems with my account I forgot my security questions. Can you help me?

    I was trying to buy music in the iTunes Store and ask me to verify my account because of my new iphone I try filling it out and keep giving me errors. I have forgotten my security questions. Can you guys help me?

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (97312)

  • I have cc but lights room is coming up with a error ,An error occurred when attempting to change modules. can you help please

    i have cc but lights room is coming up with  ,An error occurred when attempting to change modules. can you help please

    Error changing modules | Lightroom
    Mylenium

  • Smart form printing issue with LOCL printer and SAP printer

    Hi,
    The issues are as follows:
    1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
    2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
    In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
    Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
    What can be done to the reports to allow them to print on our HPLJ4?
    Thanks,
    Babu

    Hi Prathap,
    Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
    Color: White
    Saturation: 100%
    this can be the problem.
    I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
    The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
    Please change the shading for window MAIN -> tab 'Output Options' to:
    Color: Black
    Saturation: 0%
    and this should resolve the problem.
    Then create a new spool and check if the problem is resolved. See SAP Note #400050.
    Regards,
    Prabhu

  • Smart form printing issue with LOCL and SAP printer

    Hi,
    The issues are as follows:
    1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
    2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
    In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
    Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
    What can be done to the reports to allow them to print on our HPLJ4?
    Thanks, Prathap

    Hi Prathap,
    Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
       Color: White
       Saturation: 100%
    this can be the problem.
    I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
    The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
    Please change the shading for window MAIN -> tab 'Output Options' to:
       Color: Black
       Saturation: 0%
    and this should resolve the problem.
    Then create a new spool and check if the problem is resolved. See SAP Note #400050.
    Regards,
    Aidan

  • Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?

    Seeking help with PS Elements 11 which does not work with Epson r2000 printer.  Epson tech support could not fix, said it is PS e11 problem.  Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct.  Have set PS to manage color and printer manages color to off.  Would appreciate any suggestions.  Thank you.

    Hi,
    Sincerely appreciate your help.  Running Windows 7 on a  Dell XPS420.  System has been very stable for years.  Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems.  The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints. 
    Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
    Will let you know how things go.
    Richard
    Date: Thu, 12 Sep 2013 19:47:38 -0700
    From: [email protected]
    To: [email protected]
    Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        created by Barbara B. in Photoshop Elements - View the full discussion
    What operating system are you using?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

    Hi,
    Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
    documents that have a page width greater than its page height.
    In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
    In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
    Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
    This behaviour causes printing problems: the page prints out 90° rotated.
    I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
    Word 2010 seems to force the page orientation settings.
    Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
    This is very annoying, since we have to print official documents of a municipality (driver's licences).
    Is there a workaround for this issue?
    Regards,
    Laurent Grandgaignage
    Sysadmin Gemeentebestuur Stabroek, Belgium

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, we can follow these steps to test this issue
    Step 1: Repair Office 2010
    1.      
    Click
    Start, and then click Control Panel.
    2.      
    Click
    Programs and Features.
    3.      
    Click the
    Office 2010 program that you want to repair, and then click
    Change.
    4.      
    Click
    Repair, and then click Continue. You might need to restart your computer after the repair is complete.
    Step 2:
    Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
    Windows Vista and Windows 7
    a)      
    Exit Word 2010
    b)      
    Click
    Start.
    c)       
    In the
    Start Search box, type the following text, and then press
    ENTER:
    1.      
    %userprofile%\appdata\roaming\microsoft\templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    Microsoft Windows XP
    a)      
    Exit Word 2010
    b)      
    Click
    Start, and then click Run.
    c)       
    In the
    Open box, type the following text, and then press ENTER:
    %userprofile%\Application Data\Microsoft\Templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    f)       
    Close Windows Explorer.
    How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
    http://support.microsoft.com/kb/826845
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Hope that helps.
    Sincerely
    William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Wireless Printing issues with HP Deskjet 2540

    Hello everyone,
    I am experiencing an issue with an HP Deskjet 2540 printer - it prints if I have connected it to a USB cable; however, it refuses to print if I try to print wirelessly. 
    I had initially solved this problem when I went to System Preferences > Printers and Scanners and noticed two Deskjet 2540 series icons in a window titled 'Printers'. I ended up removing one of these icons and set the other one as a default, which seemed to temporarily solve my problem. Now, I see two icons back in this 'Printers' menu and my printer refuses to print through my wireless connection.
    My printer is connected to my internet connection so I don't think there is an issue here - I also have recently installed the software for this printer to make sure there was not some sort of driver issue; however, this does not seem to give me the permanent solution I am looking for.
    Any Advice? My operating system is OS X Version 10.9.5

    Hey @love2dance,
    Welcome to the HP Support Forums!  I understand you're having difficulty printing wirelessly with your HP Deskjet 2540 All-in-One Printer.  I would like to assist you with this and may have some steps that will ensure you can print wirelessly from your Mac.  
    I recommend you start from scratch and re-do your printer install and wireless setup for best results. 
    Firstly, make doubly sure your printer is connected to your wireless network by doing the following:
    Step one: Prepare for installationTo gather your network name (SSID) and password (WEP key or WPA passphrase), you can ask the person who originally set up your network, see the documentation that came with the router, or contact the manufacturer. HP cannot set up or change the network SSID or the password.
    Make sure that you have the following requirements before you begin:
    Network name: The network name is the SSID (Service Set Identifier).
    WEP key or WPA security passphrase
    A computer that is connected to the wireless network.
    Internet access. HP recommends broadband Internet access such as cable or DSL.
    Your wireless-capable HP product. Place it close to the computer during the installation procedure.
    A USB cable (used only during installation).
    Administrator privileges or password
    Make sure the product, access point, and computer are all on, and that the computer is connecting to the wireless network.
    Connect the USB Cable to the rear port of the HP product and to any USB port on the computer.
    Exit all applications running on your computer.
    Source
    Secondly, prepare your Mac by removing any existing printers added:
    Choose System Preferences from the Apple menu.
    Choose Print & Scan from the View menu.
    Click the "-" (Remove printer) button.
    Next, click here to download and install your printer's software.  As you work your way through the setup, follow the prompts to convert your usb install to wireless.  With this setup completed successfully your wireless printing capability should be restored. 
    One way to preserve this wireless connection is to make sure your wireless mode/router is left on continually.  If at anytime your network connection is lost, reconnecting your printer will mean that it's being assigned a new IP address.  The significance here is that your Mac will be looking to connect with the printer at an IP address that is no longer applicable. 
    Please let me know the result of your troubleshooting by responding to this post.  Best of luck! 
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Thanks for the reply. I'll have a look at your solution.

Maybe you are looking for