Printing problem in standerd report.
Dear Gurus,
In standard report of maintenance scheduling overview and simulation plan through T-code IP19. I am getting the graphical report.But I am not able to print that report.
Is there any special method to print the Graphical print out in SAP.
Is there any setting in functional customization for it.Or only Basis guy can fix the problem?
Please help on this issue.
With Best Regard
Pankaj U. Nimkar.
Hi Pankaj,
Please check if your printer is configured with the system or you have selected in the pop-up window when you click on print icon.
Destination: Local
Print Mode: Pages
Even if there is no printer configured with the system you are able to save the file to the desktop as *.TIF file and print later.
Thanks
Br,
Sudharsan
Similar Messages
-
Printing problem in Web report (PDF)
Hi All,
I have got a report in 6i, which is running fine on web as PDF file. But when i give print command to that report, it throws an error 'Could not start print Job'. This message comes from 'Adobe Reader'.
Please guide me to resolve this problem.
Thanks
AwadhHi,
Thanks for your response.
I have resolved this, there are two ways to do it.
1. Save the report to hard drive & then give print out.
2. Reduce the length of URL less then 254 it will work
Thanks
Awadh -
Printing problem in ABAP report
Hi All,
I have a ABAP report with line size 225 and line count 65. We are taking print out of the report on Dot matrix printer.
When taking the printouts, while going in to the 3rd page the logo on the top of the page is getting printed on the data and further going down as the pages are getting printed.
Please suggest how to control this so that the logo gets printed on top for every page.
Hope I'm clear.
Regards
AdiThanks for the reply.
I have used the no standard page heading.
We are taking prinouts on a letter head page.
Regards
Adi -
Printing Problem in Crystal Report From JSP
Hi,
I m calling crystal report from JSP.Report is parameterized.I m passing parameters from JSP.Report is displaying on the page,but when I try to print or export the report by pressing Print or export Button ,it displays an error message "Some parameters are missing values".
Please guide my,what should I do? Following is the code.
Good Bye
AQ
Vector fieldVector = new Vector();
SPParameters spParams = new SPParameters();
ReportFactory reportFactory = new ReportFactory();
// Setteing the report Name (Path Appended)
reportFactory.setReportName(ReportsCoreDataConstants.REPORT_PATH.concat("Test_Rep2.rpt"));
//Setting the parameters for the report
ParameterField paramFeilds = null;
System.out.println("fiscalYearCode:"+fiscalYearCode);
paramFeilds = spParams.createParams("IPFISCALCODE",fiscalYearCode);
paramFeilds.setReportName("");
fieldVector.add(paramFeilds);
//Creating the ReportSourceInstance
reportFactory.setFields(fieldVector);
String exp = "";
try {
ReportFactory l_reportFactory=null;
l_reportFactory = reportFactory;
if (l_reportFactory != null) {
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setParameterFields(l_reportFactory.getFields());
viewer.setOwnPage(true);
viewer.setDisplayGroupTree(false);
viewer.setHasZoomFactorList(false);
viewer.setHasLogo(false);
viewer.setHasPrintButton(true);
viewer.setHasRefreshButton(true);
viewer.setHasToggleGroupTreeButton(false);
viewer.setHasViewList(false);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setSeparatePages(true);
viewer.setEnableParameterPrompt(false);
viewer.setReuseParameterValuesOnRefresh(true);
viewer.setReportSource(l_reportFactory.createReport( request.getLocale() ));
viewer.refresh();
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),out);
viewer.dispose();
} catch(Exception e) {
exp = e.toString();
System.out.println("Exception in JSP : " + e.toString());
e.printStackTrace();
}I think ScreenRaghu is right. If you look at the generated source, your jsp becomes an action and processHttpRequest() method is invoked everytime some action happens. So when you click the export button, request object no longer has the values your report needs. Either put the values in session or via link or db or whatelse.
-
Report printing problem in Oracle Report 10g
Hi group,
I have one report which I am callinng from form. Out put is comming directly in PDF format, While taking printout on EPSON Printer allignment is not comming properly.
But If i convert in to text format and print from MS-DOS prompt on same printer it is comming properly.
Now want to print same in report builder directly in first way. whole environment is on Oracle AS and server is LINUX and client machine is windows
Please revert back, It can be a great help for me.
Thanks & Regards,
Narendra.you can solve this problem by using oracle remote printing utility(orarrp)
Nizhad
Software Engineer,
Accel Frontline Limited,
Kochi. -
Printing problem in ALV report.
Hi,
I have made an ALV report using 'REUSE_ALV_LIST_DISPLAY' FM. There are 18 coloumns in this report which i want to print in A4 paper. Thses all coloumns are printing but the font size is too small and also printing start from left most i.e. no margin for FILING. How to increase font size and left margin for filing. Kindly suggest.
Regards,
Rajesh VasudevaHi
The font size depends on the format you've choosen for the print.
The abap list arranges the page as grid: colunmXrow.
Every colunm of a page means a character.
If you use the standard format X_65_200, it means you're page is arranged for 65 row and 200 colunm:
that means the size of a character is optimized to can print 200 chararcter in a A4 page.
If you use the standard format X_65_132 it means you're page is arranged for 65 row and132 colunm:
that means the size of a character is optimized to can print 132 chararcter in a A4 page.
So that mean the size of format X_65_132 will be bigger than X_65_200, because in the same space (page A4) it needs to write 132 char instead of 200.
If your report print NN char, u should use the format wiith number colunm is closer to NN.
If there isn't a format or u use the first available format or u create a new one by trx SPAD.
Max -
Hi Experts,
I am not able to print a report output, the error which it is displaying it is
Incomplete list print-out due to a width > 255,
Yes the width has crossed 255, but what is the alternative to take the report which has crossed the with of 255.
Thanks in Advacne,
IFFHi,
Please go through this piece of document from SAP Library
If you use a column with greater than 255 as the LINE-SIZE in the REPORT or NEW-PAGE statement, the following notes apply:
Type definitions: The type group SLIST defines the valid maximum value for the list width (SLIST_MAX_LINESIZE), and contains a type for list lines with maximum type (SLIST_MAX_LISTLINE).
Printing: You cannot print the list using standard printing functions. To print it, you must create a special print routine that arranges the data in shorter lines (for example, using the ... PRINT ON addition in the NEW-PAGE) statement.
Accessing the entire contents of a line:: To read or modify the entire contents of a wide line, you can use the ... LINE VALUE addition in the READ LINE or MODIFY LINE statements. This is an alternative to using SY-LISEL that is independent of the attributes of the system field (since the length of SY-LISEL is 255 characters).
Hroizontal lines: With extra-wide lists, the "ULINE." statement corresponds to "WRITE / SY-ULINE.". So, for example, "ULINE AT 5(300)." corresponds to "WRITE AT 5(300) SY-ULINE.".
Output length:: You can use the length specification in WRITE (or ULINE) to extend the output length of an extra-wide list up to the value of LINE-SIZE. If you want to output a whole field that is longer than 255 characters, you must use this, even if the field itself is defined as longer than 255 characters.
Example
NEW-PAGE LINE-SIZE 1000.
DATA: F1(500) VALUE 'F1'.
WRITE: / F1 COLOR COL_NORMAL. " Output with length 255
WRITE: /(500) F1 COLOR COL_NORMAL. " Output with length 500
Regards,
Omkar. -
Download/print problems with Interactive Reports on 10g
Running APEX 3.1.1.00.9 on Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production with BI Publisher
When downloading Interactive report using xls/rtf - no data is shown, pdf - corrupted file error is shown. This seems to only happen with row counts over 20. Same tables with less rows populates fine with all file types.
This problem does not exist using the APEX.oracle.com site, same tables. Is this due to the DB version?For addional info, I'm putting down major steps that I followed so that it can be confirmed for any missing links. Sorry for a little bigger post
1) $ORACLE_HOME\bin\rwserver.exe -install myRepSrv
2) Created a report in the reports builder, saved as .rdf
3) In Forms builder, attached the report as a new report object.
4) In a procedure to call the report, following code is written
----------8<---------------
repid := find_report_object('testreport');
set_Report_object_property(repid,report_filename,'testreport');
set_report_object_property(repid,report_COMM_MODE,synchronous);
set_report_object_property(repid,report_server,'myRepSrv');
v_rep_jobid := RUN_REPORT_OBJECT(repid);
v_rep_stat := report_object_status(v_rep_jobid);
IF v_rep_stat = 'FINISHED' THEN
web.show_document('/reports/rwservlet/getjobid'||substr(v_rep,length('myRepSrv')+2,LENGTH(V_REP))||'?server=myrepsrv','_blank');
else
message (v_rep_stat||'- Report output aborted '||sqlerrm);
END IF;
----------8<---------------
5) Compiled the form and placed the form binary in approprite folder
6) modified $ORACLE_HOME\reports\conf\myRepSrv.conf. Changed the property of engine tag(sourceDir) to correctly point to the appropriate directory where the report has been saved
7) modified rwservlet.properties to turn off SSO
8) Started the external reports service with modified values
9) Invoked the form to launch the report
Please also note that if I invoke directly web.show_document and paste the hardcoded path, as can be expected, my work is done. But as can be agreed, this is not a very good approach.
Thanks and regards,
Kinjal Sonpal -
Image Print problem in PDF Reports
Hi,
I have imported a JPG image on the layout using Reports builder 6i using File -> Import -> Image. Once imported, this image is displayed correctly in the report layout editor. But, when I run this report (Pdf format) from Oracle Apps, this image is displayed with half side displayed as solid black color and the other half side with the actual picture.
I have tried to change the size of the image, import other type of images (BMP) & tried dynamic image using "Link File" option, but nothing could work.
Appreciate your help on the same.
Thanks.Hi,
Yes. I have tried running that report with other images of different formats & size. But nothing worked out till now.
Regards. -
Printing Problem in sap script
Hi all,
There is a printing problem in z report of sapscript.
when I am giving continuous print ...
1st page is right in print format but in 2nd page the text comes 1 row up...and so on...
so the starting point for all page are not same...
Please help me...Hello,
Check SAP note 39259.
Regards,
David -
Drill-Down Report Printing Problem for Selection Parameters
Dear Experts,
Have tried to configure Drill-Down Report for Vendor Balances,
Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
Input Parameter Screen
Report Output Screen
Print Preview Screen (First Page - Selection Parameters)
Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
Thanks
Regards
PHello Ms. Preeti,
Thanks for your reply, Have designed the report through FKI0 (FKI*)
Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
Thanks for your help
Kind Regards
P -
Crystal report printing problem in Malayalam
Hi,
I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
please help me...!!!Hi priyashekar,
I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi all
I have a problem when i print my alv grid report it first prints the title page then the revelent pages can i remove that title page.
thankshave you checked with your windows administrator??
-
Printer Problem In Oracle Forms And Reports server
Hi,
I am facing a problem regarding installation of printer drivers in my Reports Server (10.1.2.0.2 on Windows 2003).
Unless the printer driver is installed locally on the Report Server Reports are not printing.
The problem is with the USB printers at various location .
How to install the printer in this case.
Any one can help in this regards.
Regards,
KumarI think that specific drivers are needed always when you need to print in windows enviroments, with or without report server, locally or remotely. If windows "see" the printer, report server does too.
-
Problem when trying to print standart invoice crystal report for SAP
Hi All, I have the following problem when trying to print a system invoice report in crystal reports for SAP
I pass params and load the report using this code
Private Sub DisplayThreadReportSeq()
Dim oView As New frmViewReport
Dim strReportPath As String = ""
Dim strParamName As String = ""
Try
Dim CR As New ReportDocument
CR.Load(oReport.CrstPath)
' Declare the parameter related objects.
SetReportValues(CR)
Dim crParameterDiscreteValue As ParameterDiscreteValue
Dim crParameterFieldDefinitions As ParameterFieldDefinitions
Dim crParameterFieldLocation As ParameterFieldDefinition
Dim crParameterValues As ParameterValues
' Get the report's parameters collection.
For Each oPar As cslParam In oReport.Params
crParameterFieldDefinitions = CR.DataDefinition.ParameterFields
crParameterFieldLocation = crParameterFieldDefinitions.Item(oPar.ParName)
crParameterValues = crParameterFieldLocation.CurrentValues
crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
crParameterDiscreteValue.Value = oPar.Value
crParameterValues.Add(crParameterDiscreteValue)
crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
Next
If pPrint Then
If oReport.Printer "" Then
CR.PrintOptions.PrinterName = oReport.Printer
End If
CR.PrintToPrinter(IIf(oReport.Copies = "", 1, oReport.Copies), False, 0, 0)
SBO_Application.StatusBar.SetText("Printed Document Successfully", SAPbouiCOM.BoMessageTime.bmt_Medium, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
Else
oView.Text = pReport
oView.TopMost = True
oView.Viewer.ReportSource = CR
oView.Hide()
oView.ShowDialog()
End If
Catch ex As Exception
Util_GenErrorLog("DisplayReport", ex)
End Try
End Sub
This code works fine when the report invoke to print is developed in crystal reports version for .net 2008 or .net 2005
when trying to print a report standart getting from SAP BO 8.8.1 using this code I getting the following error:
Error in File C:UsersecombaAppDataLocalTemp5ARInvoiceStandartSap {300B9A68-DF05-4D7B-8F3B-1670A4493BEE}.rpt:
Error in formula .
'Shared numberVar SectionTotalMaxHeght;
A number, currency amount, boolean, date, time, date-time, or string is expected here.
This report is the standart report that SAP 8.8.1 includes and works fine on SAP.
I referenced this dlls CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.CrystalReports.Shared, version 10.2.3600
How I can get these dll´s version for Crystal Report 2008 for SAP Business one or How I can solve this problem
thanks in advance,
Ezequiel.Hi Ezequiel,
You can try to search in SAP Business One Reporting & Printing forum section or post there.
nd.Q
Maybe you are looking for
-
HP Pavilion hard drive response time is very slow but tests pass (evenutally)
I have owned a HP Pavilion M1199a originally running Windows XP, but has been running Windows Vista 32-bit for the last 3 years or more. The PC started to lock up for 30 seconds or more (2 weeks ago), with the disk light constantly on then go again f
-
Garbage tables in oracle database
Hi, Is there anyone can tell me whats wrong with my database. I dont know what is actually the problem is in my oracle scott database i got some garbage table name once i try to execute "select table_name from user_tables" command. Here is the output
-
Viewing a backed up sparsebundle to recover a file
I'm reading this link from James and hoping someone can help me figure out how to find a file on a sparsebundle that is on an external drive. This is an archived backup and is not the current sparsebundle that I am backing up with as there was an iss
-
[JS CS5] UserInteractionLevels not working with placeXML
I've included "app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll" at the beginning of my script, because I WANT the script to stop whenever a dialog or alert is shown. But it doesn't work when I use the "myDoc.xmlElem
-
Remote execution on 3 computers
Hello, I want to execute one sequence from ServerComp on 3 Clients by using Remote execution. Can i do this? (in the Specify Model>>Edit sequence call >> Remote Execution i can choose only one host name) Thank you. Olga