Printing Problems with JAVA

Hello,
I have problems with the following Code.
import java.text.NumberFormat;
import javax.print.Doc;
import javax.print.DocFlavor;
import javax.print.DocPrintJob;
import javax.print.PrintException;
import javax.print.PrintService;
import javax.print.PrintServiceLookup;
import javax.print.SimpleDoc;
public class Printer {
     private PrintService[] printers;
     private int choosenPrinter;
     private StringBuffer text;
      * Der Konstruktor legt einen Array der verfügbaren Drucker an.
      * @param stdPrinter Der aktuell ausgewählte Drucker(-index)
     public Printer(int stdPrinter) {
          printers = PrintServiceLookup.lookupPrintServices(DocFlavor.INPUT_STREAM.AUTOSENSE, null);
          if (printers.length > 0){
               choosenPrinter = 0;
               setChoosenPrinter(stdPrinter);
          } else choosenPrinter = -1;
      * Liefert einen Array mit Namen der verfügbaren Drucker.
      * @return Namen der verfügbaren Drucker
     public String[] getPrinters() {
          String[] retPrinters = new String[printers.length];
          for (int i = 0; i < printers.length; i++) {
               retPrinters[i] = printers.getName();
          return retPrinters;
     * @return Liefert den Index des aktuell ausgewählten Druckera
     public int getChoosenPrinter() {
          return choosenPrinter;
     * Setzt den Index des aktuell ausgewählten Druckers neu,
     * wenn der Index gültig ist.
     * @param choosenPrinter Der neu ausgewählte Index
     public void setChoosenPrinter(int choosenPrinter) {
          if (choosenPrinter <= printers.length) {
               this.choosenPrinter = choosenPrinter;
     * Druckt eine oder mehere Quittungen über die übergebenen Daten
     * @param buchung Buchung die in der Quittung enthalten sein soll.
     * @param haendler Händler der in die Quittung aufgenommen werden soll.
     * @param kunde Kunde der in die Quittung aufgenommen werden soll.
     * @param config Das aktuelle Configobjekt.
     * @param times Anzahl der Quittungen die gedruckt werden sollen.
     * @return true wenn der Druck erfolgreich angestoßen wurde, false sonst
     public boolean printBuchung() {
          if (choosenPrinter == -1) return false;
          PrintService printer = printers[choosenPrinter];
          String ls = System.getProperty("line.separator");
          NumberFormat nf = NumberFormat.getInstance();
          nf.setMaximumFractionDigits(2);
          nf.setMinimumFractionDigits(2);
          text = new StringBuffer();
          if ('T' == 'T') {
               text.append("Q U I T T U N G");
               text.append(ls);
          String temp = text.toString();
          temp = temp.replace("ä", "ae");
          temp = temp.replace("ö", "oe");
          temp = temp.replace("ü", "ue");
          temp = temp.replace("ß", "ss");
          for (int i=0; i<1000; i++) {
               DocPrintJob docPJ = printer.createPrintJob();
               Doc doc;
               doc = new SimpleDoc(temp.getBytes(), DocFlavor.BYTE_ARRAY.AUTOSENSE, null);
               try
               docPJ.print(doc, null);
               catch (PrintException e)
                    return false;
               catch (Exception e)
                    // TODO Auto-generated catch block
                    e.printStackTrace();
          return true;
}The programm sends the printing job to Windows XP but nothing is happend. Have anybody a tip for me?

I tried this and it shut off Firefox accessing the internet. had to uninstall FF and Adobe and do a reinstall to get my internet back up and working. This only effected my browser not my pop3 mail

Similar Messages

Problem with java print

Hi, I'm have problems with java print (g2d). For example i want to print a String "ABC**************************DEF" on paper size 80mm width (invoice paper). I can print all that string with paper A4 size, but with paper size 80mm i have problem with that String, the result is "C*****************D" lost AB and EF. I think i had problem with paper size, pls help me. Thank you so much.
My code is below:
package app.util;
To change this template, choose Tools | Templates
and open the template in the editor.
@author HUU NGHIA
// Printing Sample code
// This code demonstrates the Java 2 print mechanism
import com.connection.Product;
import java.awt.;
import java.awt.print.;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.Vector;
// Define a class that is called per page that needs printing. It implements
// the one and only method in the Printable interface : print. Note that
// this is quite separate from the PrinterJob class print() method.
// This method does not actually do any printing. All it does is write text
// and/or graphics onto the passed page (graphics context). The calling
// printer job object will then pass this page to the printer.
public class PrinterController {
public static void print(Vector<Product> products) {
// Create an object that will hold all print parameters, such as
// page size, printer resolution. In addition, it manages the print
// process (job).
PrinterJob job = PrinterJob.getPrinterJob();
// It is first called to tell it what object will print each page.
job.setPrintable(new PrintObject(products));
// Then it is called to display the standard print options dialog.
if (job.printDialog()) {
// If the user has pressed OK (printDialog returns true), then go
// ahead with the printing. This is started by the simple call to
// the job print() method. When it runs, it calls the page print
// object for page index 0. Then page index 1, 2, and so on
// until NO_SUCH_PAGE is returned.
try {
job.print();
} catch (PrinterException e) {
e.printStackTrace();
class PrintObject implements Printable {
Vector<Product> products;
public PrintObject(Vector<Product> products) {
this.products = products;
public int print(Graphics g, PageFormat f, int pageIndex) {
Graphics2D g2 = (Graphics2D) g; // Allow use of Java 2 graphics on
// the print pages :
System.out.println("f.getImageableX(): " f.getImageableX());
// A simple circle to go on the second page (index = 1).
switch (pageIndex) {
case 0:
printInvoiceTemplate(g2, products);
return PAGE_EXISTS;
// case 1 : g2.setColor(Color.red); // Page 2 : print a circle
// g2.draw(circle);
// return PAGE_EXISTS;
default:
return NO_SUCH_PAGE; // No other pages
public String getDate(){
Date d = new Date();
SimpleDateFormat sp = new SimpleDateFormat("dd/MM/yyyy hh:mm:ss");
return sp.format(d);
private void printInvoiceTemplate(Graphics2D g2, Vector<Product> products) {
//System.out.println("#######" cardInfo.getTranType());
int alignY = 40;
int alignXCenter = 60;
int enterSpace = 15;
int xProductName = 10;
int xUnit = 85;
int xAmt = 110;
int xTotal = 155;
int yEndData = 0;
int totalAll = 0;
g2.setColor(Color.black); // Page 1 : print a rectangle
g2.setFont(new Font("Verdana", 0, 8));
g2.drawString("ABC", alignXCenter, alignY);
g2.drawString("123WWW", alignXCenter, alignY enterSpace *1);
g2.drawString("Phone: (08)62891633", alignXCenter, alignY enterSpace*2);
g2.setFont(new Font("Verdana", 1, 12));
g2.drawString("Invoice", alignXCenter - 10, alignY enterSpace*4);
products = new Vector<Product>();
for (int i = 0; i < 10; i+) {
Product product = new Product();
product.setProductName("ZESTORETIC TAB 20MG B/28" i);
product.setUnit("v"+i);
product.setAmt(5+i);
product.setPrice(50000+i);
products.add(product);
for (int i = 0; i < products.size(); i+) {
System.err.println(i);
int total = products.get(i).getAmt()*products.get(i).getPrice();
g2.drawString(i+1+"."products.get(i).getProductName(), xProductName+2, alignY enterSpace(8+(i*2)));
g2.drawString(products.get(i).getUnit(), xUnit+5, alignY enterSpace*(9(i*2)));
g2.drawString(products.get(i).getAmt()"x"+AppUtils.formatPrice(products.get(i).getPrice())"", xAmt+5, alignY enterSpace*(9(i*2)));
g2.drawString(AppUtils.formatPrice(total), xTotal+15, alignY enterSpace*(9(i*2)));
yEndData = 9+(i*2);
totalAll = totalAll total;
System.out.println(yEndData);
g2.drawLine(xProductName, alignY enterSpace*(yEndData 1), 210, alignY enterSpace*(yEndData 1));
g2.drawString(AppUtils.formatPrice(totalAll)" VND", xAmt, alignY enterSpace*(yEndData 2));
g2.drawString("Thank you", alignXCenter, alignY enterSpace*(yEndData 4));
g2.drawString("***", alignXCenter 30, alignY enterSpace*(yEndData + 5));
public static void main(String[] args) {
PrinterController.print(null);
}

When you posted you didn't use code tags, as a result the forum software has interpreted some of your characters in your program as screen formatting codes and has corrupted your post--the most easily observable change is the bolded characters in you post. Please repost your code using code tags so people will be helping with uncorrupted code.

Problem with Java Stack- dev_w2 log mentioned.

Hi everyone, I have a problem with Java Stack, I could not connect to XI home page,
I am unable to login to j2ee engine using visual Administrator.
Please go through the log below. And help me out to resolve this issue and let me know what could be the problem.
trc file: "dev_w2", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
B New connection 0 created
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    43
M intno      20020600
M make:      multithreaded, Unicode
M pid        4140
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 4140) [dpxxdisp.c   1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm)          13160     (1316)
M DpShMCreate: sizeof(tm_adm)          2780232     (13832)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpShMCreate: sizeof(comm_adm)          290000     (580)
M DpShMCreate: sizeof(vmc_adm)          0     (372)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 060A0040, size: 3195320)
M DpShMCreate: allocated sys_adm at 060A0040
M DpShMCreate: allocated wp_adm at 060A1B58
M DpShMCreate: allocated tm_adm_list at 060A4EC0
M DpShMCreate: allocated tm_adm at 060A4EE8
M DpShMCreate: allocated wp_ca_adm at 0634BB30
M DpShMCreate: allocated appc_ca_adm at 063518F0
M DpShMCreate: allocated comm_adm_list at 06353830
M DpShMCreate: allocated comm_adm at 06353848
M DpShMCreate: allocated vmc_adm_list at 0639A518
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0639A540
M DpShMCreate: allocated wall_adm at 0639A548
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X <ES> InitFreeList
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M calling db_connect ...
C Got ORACLE_HOME=c:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSXI's password
C Connecting as /@SXI on connection 0 ...
C Attaching to DB Server SXI (con_hdl=0,svchp=04494404,svrhp=04495074)
C
C Starting user session (con_hdl=0,svchp=04494404,srvhp=04495074,usrhp=0449D8AC)
C
C Now I'm connected to ORACLE
C Got SAPSXI's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=04494404,usrhp=0449D8AC)
C Now I'm disconnected from ORACLE
C Connecting as SAPSXI/<pwd>@SXI on connection 0 ...
C Starting user session (con_hdl=0,svchp=04494404,srvhp=04495074,usrhp=0449D8AC)
C Now I'm connected to ORACLE
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance sxi is running on STARXI with ORACLE version 9.2.0.5.0 since 20081020
B Connection 0 opened
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20081020 123752 STARXI
M db_connect o.k.
I MtxInit: 2 0 0
M SHM_PRES_BUF               (addr: 08230040, size: 4400128)
M SHM_ROLL_AREA          (addr: 62E40040, size: 77594624)
M SHM_PAGING_AREA          (addr: 08670040, size: 39845888)
M SHM_ROLL_ADM               (addr: 0AC80040, size: 775412)
M SHM_PAGING_ADM          (addr: 0AD40040, size: 525344)
M ThCreateNoBuffer          allocated 540152 bytes for 1000 entries at 0ADD0040
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12160 bytes (50 server) at 0AE60040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X Using implementation flat
X ES initialized.
B
B db_con_shm_ini: WP_ID = 2, WP_CNT = 10
B dbtbxbuf: Buffer TABL (addr: 103D00C8, size: 30000128, end: 1206C4C8)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 14302848
B ***LOG BB0=> buffer TABL       started with length 30000128   bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]
B dbtbxbuf: Buffer TABLP (addr: 0E4000C8, size: 10240000, end: 0EDC40C8)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 5046656
B ***LOG BB0=> buffer TABLP      started with length 10240000   bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 41 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer EIBUF (addr: 0EDE00D0, size: 4194304, end: 0F1E00D0)
B ***LOG BB0=> buffer EIBUF      started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B Layout of ESM   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer ESM   (addr: 0F1F00D0, size: 4194304, end: 0F5F00D0)
B ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B Layout of CUA   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 3001 * 48 = 144048
B 4: 1500 * 232 = 348000
B 5: 3001 * 4 = 12004
B 6: 1 * 200 = 200
B 7: 193 * 4 = 772
B 8: 5012 * 512 = 2566144
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer CUA   (addr: 0F6000D0, size: 3072000, end: 0F8EE0D0)
B ***LOG BB0=> buffer CUA        started with length 3000k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B Layout of OTR   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 81 * 4 = 324
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer OTR   (addr: 0F8F00D0, size: 4194304, end: 0FCF00D0)
B ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#1 @ 2206] [dbcalbuf2206 ]
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:640.00]):
B   max_blocking_factor = 15, max_in_blocking_factor      =   5,
B   min_blocking_factor = 10, min_in_blocking_factor      =   5,
B   prefer_union_all    =   0, prefer_union_for_select_all =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B   select *            =0x0f, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M
M PfHIndInitialize: memory=<0AEEC488>, header=<0AEEC488>, records=<0AEEC4D0>
M SecAudit(init_sel_info): init of SCSA completed: 02 slots used
M ***LOG AV6=> 02& [rsauwr1.c    1619]
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=C:\usr\sap\SXI\DVEBMGS00\sec, AS=starxi, instanceid=00)
N
N SsfPseLoad: Downloading file C:\usr\sap\SXI\DVEBMGS00\sec\SAPSYS.pse (client:    , key: SYSPSE, len: 1078)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
S
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 121963B0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      intervals: query=50, rescan=1800, global=300 info=120
S      processing queue enabled
S creating spool memory service RSPO-RCLOCKS at 0FEB00A8
S doing lock recovery
S setting server cache root
S using server cache size 100 (prof=100)
S creating spool memory service RSPO-SERVERCACHE at 0FEB0370
S    using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 4kb, admin_size: 5032kb.
A PXA allocated (address 67850040, size 150000K)
A System name
A ORACLE...........................SXI........20081004121019.....................................
A is used for RFC security.
A Sharedbuffer token: 41534050...33 (len: 111)====== 2b61c190857e36a8681ef39a...
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm initialized (addr=579F4000 leng=20955136 end=58DF0000)
A >> Shm MMADM area (addr=57E69DF0 leng=126176 end=57E88AD0)
A >> Shm MMDAT area (addr=57E89000 leng=16150528 end=58DF0000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 9
M ThrCreateShObjects          allocated 10568 bytes at 0FFD0040
M ThVBStartUp: restart pending update requests
M
M ThVBAutoStart: update-auto-delete
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\SXI\DVEBMGS00\sec): ok
N SsfSapSecin: PSE C:\usr\sap\SXI\DVEBMGS00\sec\SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\SXI\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 640, [6400.0.43.20020600]
W    ITS Plugin: Int.version, [31]
W    ITS Plugin: Feature set: [3]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by profile
M ThISetEnqname: enq name = >starxi_SXI_00                           <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E Enqueue Info: enque/disable_replication = 2
E Enqueue Info: replication disabled
E
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime    = -999
E EnqId.RandomNumber      = -999
E ReqOrd.TimeInSecs       = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime    = -999
E EnqId.RandomNumber      = -999
E ReqOrd.TimeInSecs       = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId:          EnqTabCreaTime/RandomNumber    = 20.10.2008 12:38:10 1224486490 / 4140
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec    = 20.10.2008 12:38:11 1224486491 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec    = 20.10.2008 12:38:11 1224486491 / 1
E Status:         STATUS_OK
E -
M ThActivateServer: state = STARTING
L Begin of BtcSysStartRaise
L Raise event SAP_SYSTEM_START with parameter <starxi_SXI_00       >
L End of BtcSysStartRaise
I
I MPI<c>9#3 Peak buffer usage: 5 (@ 64 KB)
M
M *** WARNING => ThCheckReqInfo: req_info & DP_CANT_HANDLE_REQ
M return number range rc 12
M *** WARNING => ThNoGet: get from object (cli/obj/subobj/range = 000/ALAUTOUID /      /01) returned rc 12
S
S server @>SSRV:starxi_SXI_00@< appears or changes (state 1)
B table logging switched off for all clients
S
S server @>SSRV:starxi_SXI_00@< appears or changes (state 1)
M
M hostaddrlist return 0
M
M hostaddrlist return 0
M
M hostaddrlist return 0
M hostaddrlist return 0
M hostaddrlist return 0
Regards,
Varun.

You probably made the same mistake as I did and added the tables manually to the "sample" database instead of the "sun-appserv-samples" database.
marc

Printing problem with WindowsXP

I've written a Java application using SDK v1.4.0 and this class works with all printers and Windows versions (95, 98, ME) on the several PCs I've tested it on except the machine running WindowsXP. Using WindowsXP, the page prints out the border around the textArea, but not the text. This problem occurs with both HPDeskJet and HPLaserJet printers connected to that PC.
Has anyone seen a similar problem with WindowsXP? What should I change in this class, or change in the PC/printer properties, to get this print class to work with WindowsXP? All PCs tested are running Java v1.4.0.
Russ Carroll
(class code follows below)
class ButtonHandlerPrint extends Frame implements ActionListener{
     public void actionPerformed(ActionEvent e){
          PageAttributes pageAttributes = new PageAttributes();
          pageAttributes.setPrintQuality(3);
          PrintJob pjob = Toolkit.getDefaultToolkit().getPrintJob(this,null,null,pageAttributes);
          if(pjob!=null){
               Graphics pg = pjob.getGraphics();
               if(pg!=null){
                    pg.translate(50,50);
                    textAreawinBCP.printAll(pg);
                    pg.dispose();
               pjob.end();

Did you find a fix for this problem? I have a similar problem with Win 2000 and JRE 1.4.0.01. My print works with Java 1.2 methods and prints fine in JRE 1.3.1 in Win 98,Me,2000, and prints fine in JRE 1.4.0.01 in Win 98 and Me but not in 2000. The problem sounds similar, but my text in a table doesn't print. I do get text printed that is in a text field.

Problems with java j2re using mozilla

Hi,
i'm using j2re1.4.2_05 plugin for mozilla in linux (Fedora Core 2). My internet access goes throught a router (SMC Networks ISDN Barricade SMC7301TA). It's settings can be edited throught a web browser LAN connection. And here the problems begin. On routers settings page a java output console (for error and other messages) is running, which doesn't work, despite java applications on other web pages work well (I tested it on sun's java test page and it's working properly). Java console exits the following errorr message:
>
load: class DynamicTable.class not found.
java.lang.ClassNotFoundException: DynamicTable.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Is there a way to fix this problem? Cause without the command output it's mearly unpossible to configure the router.

Yes i can make changes. Not everything is realised with java, just the output console, which reports if the changes i made succeded, prints out logs, gives additional info about some settings etc. So, i can make changes, but i have no response, for example: everytime i save something i don't know if the save was succesful. I can't take a look at IP routing table and DHCP configuration...
On windows xp, using internet explorer (the default version for xp) everything works perfect. But mozilla for windows has also problems with java. I know i can still change settings on wins, but right now i'm having some problems with networking on linux and i have to set things up in it (besides i use wins only because of school purposes).

Problem with Java and Windows (Mainly Vista and UAC)

Hi all,
I am having a problem with a program that I've devoloped. The program itself is packaged as a jar and I plan to deploy it across multiple platforms eventually however right now i am only concerned about windows based systems. I have made an installer for a windows baised systems using NSIS to install the software files. I made the installer as I need several java packages to be installed so the program would work (JAI, J3D, JAI ImageIO) and I also require the program to have fileassociations on windows.
I know that this is not what java is about, however the majority of the users will be on windows baised systems so I've decided that OS specific installers is the best option.
During the process I have noticed that there are several key problem with java for this type of application!
The first issue that I have come across is getting file associations to work on java. As a .jar is not an excutable it is not possible to directly associate a filetype with it in java so to overcome this I currently run the program from a .bat files and also the program requires large memory so this also allows me to run the program with -xmx. The batch file that I use is :
<code>
cd PATH TO PROGRAM
start javaw -Dsun.java2d.noddraw=true -Xmn100M -Xms500M -Xmx1000M -jar "PATH TO PROGRAM\program.jar" %1 -vram 134217728
pause;
</code>
Ok so all this appears to work fine and allows windows to have file associations and start the program and thats all works perfectly but this is a non-ideal solution. Has anyone got any advice on improving this?
The next problem that I have appears to be a problem with Vista and UAC (user access control). When a user installs the program and installs the program into the program files directory I found that the program did not work and kept saying that I did not have access to the files in the current directory. This is a problem as I read and write settings files during program execution.
On a Vista system UAC prevents file write operations into the Program Files directory unless the program has requested elevated status even if the user is a full administrator. The probem is that there appears to be no real way to achieve this under java that I'm aware of...
Has anyone else had this probem and has a suitable solution?
Any advice on these issues would realy be appricated.
Regards
Joey

Ok so i've kinda found a solution, its not ideal but its very good. I found this program called Elevate
A link to the site I got it was
http://www.wintellect.com/cs/blogs/jrobbins/archive/2007/03/27/elevate-a-process-at-the-command-line-in-vista.aspx
This program allows you start java with a UAC dialog for high access using
Elevate java -jar myjar.jar
This then allows you to have full access using java... I guess it could be dangerous but it does the job.

Problem with java and pogo games

i use mozilla and now with the problems with java and hackers cannot play my pogo games,what can i do? i disabled my java i tried java 6 doesnt work or is not safe,what is a safe way to play games on pogo that use java?

Oracle has released a Java 7 Update 11 to address security vulnerabilities and you should update to that version.
*https://support.mozilla.org/kb/how-to-use-java-if-its-been-blocked
See also:
*http://kb.mozillazine.org/Java#Windows_installation_issues
You can find the latest Java version on the Oracle website.
See Java Platform > Java SE 7U11 and Java 6U38 (Download JRE)
*http://www.oracle.com/technetwork/java/javase/downloads/index.html

Problem with java swing button and loop

Problem with java swing button and loop
I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
When I click on start button it must do next:
Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
And when I click on stop button it must do next:
Start button must set enabled and selected and Stop button must set disenabled.
Field status is set to 0.
This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
There is java code, so you can get better picture:
/** start button */
public void gStart_ActionEvents() {
try {
ivjGStart.setEnabled(false);
ivjGStop.setEnabled(true);
ivjGStop.setSelected(true);
getJTextPane1().setText("Program is running ...");
Status = 1;
} catch (Exception e) {}
/** stop button */
public void gStop_ActionEvents() {
try {
ivjGStart.setEnabled(true);
ivjGStart.setSelected(true);
ivjGStop.setEnabled(false);
getJTextPane1().setText("Program is NOT running ...");
Status = 0;
} catch (Exception e) {
/** procedure IzvajajNeprekinjeno() */
public void IzvajajNeprekinjeno() { //RunLoop
try {
int zamik = 2000; //delay
do {
Thread.sleep(zamik);
PreberiDat(); //procedure
} while (Status == 1);
} catch (Exception e) {
So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
Any help will be appreciated.
Best regards,
Tomi

This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
Since java is task-based this will happen if you do like this:
1. Button "Start" is pressed. Thread running: GUI_Thread
2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
5. Call PreberiDat(). Thread running: GUI_Thread
6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
http://java.sun.com/docs/books/tutorial/uiswing/index.html
This tutorial explains how to build a multi threaded gui.
/Lime

I have a problem with Java and an e-procurement system integrating

I use an e-procurement system at work and yesterday I could not get my parts list from the suppliers web site to display in our in-house eprocurment finance package.
There is not a problem with the finance package. There is not a problem with the suppliers web site. I have verified both of these by other colleagues being able to complete what I am trying to do.
The difference between my version of Firefox and my colleagues' is that I am on version 6.0.1 and they are on 6.0.
I have had problems with Java not displaying certain animations on the suppliers web site but, my colleague does not and I am suspicious that this is the problem. Can anyone verify this please and what can I do about it. My Java updates are up-to-date as of yesterday and are automatic.
Thanks.

I was quite amazed I never got a reply to this, in the past people here have been helpful. In any case I was finally able to enter this website on the exceptions list in the Java panel, and I believe it is okay now.

Problem with Java after Software Update to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Problem with Java after System Upgrade to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $ java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
cheers

Hi man,
In the wake of this java problem I resorted to keep working on my old machine, and today in my spare time I tried to fix this new machine.
So I execute $java on prompt, and then try to check the files it has opened, using lsof -p pid
I see it referring to
/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
isn't this usually the JAVA_HOME
However, executing $/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
hangs!!
but
$/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
works!!
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home/bin
$ ./java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06-153)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_07-b06-57, mixed mode)
So, I changed the links as follows
borgraf:Versions raveesh$ l
total 72
drwxr-xr-x 3 root wheel 102 Mar 6 2008 1.3.1
lrwxr-xr-x 1 root wheel 3 May 21 19:42 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 May 21 19:42 1.6.0
lrwxr-xr-x 1 root wheel 3 May 21 19:44 OldCurrentJDK -> 1.5
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.4.2
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.5.0
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.6 -> 1.6.0
lrwxr-xr-x 1 root wheel 1 May 21 19:44 OldCurrent -> A
drwxr-xr-x 8 root wheel 272 May 21 19:44 A
lrwxr-xr-x 1 root wheel 3 Jun 4 17:14 CurrentJDK -> 1.6
lrwxr-xr-x 1 root wheel 3 Jun 4 17:21 Current -> 1.6
Linking my Current and CurrentJDK to 1.6 and it works!
However, shall that be the reason!
what is in your /Versions/Current/
I got the following
$ ls /System/Library/Frameworks/JavaVM.framework/Versions/Current
CodeResources Frameworks JavaVM
Commands Headers Resources
There is no /Home in here, which is usually the case for /1.5 or /1.6
Anyways, things seems to work for the moment. Lets see if I get problem with using Java.
thanks

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Printing problem with Summarize Comments?

Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

Um I dont know if im doing something daft but I tried this like you said
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if(printJob.printDialog()){
try {
          PageFormat pageFormat = printJob.defaultPage();
          if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
          landscape = 0;} else {
               landscape = 1;}
          System.out.println("THE ORIENTATION IS "+ landscape);
          printJob.print(); }
catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
cheers
pmiggy

Printing Problems with JAVA

Similar Messages

Maybe you are looking for