Printing Text between boxes in sapscript

Hi Friend ,
I have a invoice form . There is the adddress window , info window and the main window . I need to insert some text between the space between the MAIN window and the INFO window . Is there a way we can directly print text between Window or Do i need to create a new window ?? How can I go about this . I have already defined the text in SO10 transaction . I am using this command but dont know how to put it in the space between the infowindow and the main window . Please suggest .
INCLUDE Z_text_insert OBJECT TEXT ID ST LANGUAGE SP PARAGRAPH HP.
Thank you ,
Hari
Message was edited by:
Hari G Krishna

Ya u have to insert a window between the two windows.Any text to be printed should be in window.
Check and let me know if u face any problem.
Regards

Similar Messages

How to print inside a box in sapscript

Hi,
I've created a box in sap script. when i try to print something inside it....it either prints above or below the box and not inside it...
any suggestions will be appreciated.
Thanks.

Hello,
Printing the text in the box is some what Trial and error method.
I have faced the similar problem, what I have done is first i have displayed the data I want and then displayed box .
If u want I can help u further make urself clear and maile me.
Regards

Output a shaded box in SAPScript with Dot Matrix Printer

Hi guys,
Is there a way to print a shaded box in Sapscript using Dot matrix printer?
BOX XPOS '4'CM YPOS '2.8'CM WIDTH '2'CM HEIGHT '0.4'CM FRAME 10 TW INTENSITY 100
I tried the code as above but it wouldn't work, and doing a search on this forum tells me box command wouldn't work on dot matrix printer. So is there any alternative to do this?

Hi
if it is possible try to print the same in another printer and confirm the problem
no doubt certain printers may create such problems while printing the output
so to confirm the problem try with other printer.
Reward points for useful Answers
Regards
Anji

The linked text boxes are very important to my work flow. Not being able to flow text between pages has cost me a lot of valuable time in producing my newsletter. Any ideas?

In Pages 09 I was able to flow text between text boxes on the same page and to different pages but that seems to have gone away. This is one of the most useful items in Pages that I use. Now it seems to have gone away and I could find no replacement in doing my last newsletter, (which took at least 3 times as long to produce.) I am very disappointed in Pages 13 so far and look for some bright side to this software to change my opinion.

Apple has promised to bring back *some* features "within six montha." We're 4 months into the clock. They have brought back a couple of features (ability to cutomize the toolbar, for instance, and vertical ruler). But they still have a long way to go and there is no certainty that linked text boxes will be restroed. It wasn't cited in their original list of examples of what would be brought back. (Nor was mail merge, bookmarks, Applescript support, or many other items.)

Printing text at particular position in SAPscript

Hi All,
I want to print text at particular position, I used Command POSITION but it is not working .
As I am using counter as Y position for a box and i want to print lines of text in that box. since I am able to position box according to counter but, texts which I want to display in box is not comming inside the box according to the counter.
Please suggest what command to use for this.
Thanks & Regards
Shweta

Yes Bernsen ,
You are right. POSITION works only with BOX not with text.
And also I can not create text in the another window as there are two headers of main window in my form . one is for the line Items and after completion of it tis another header which is for the another lineitems say for withholding taxes of the vendor. so I need both the headers in the main window.
Any way finally I got answer of my question. I will want to share with you all what I did:
For the first box headre no y coordinate was required as height was the main thing here.
Then came the line items . I set counter for this line item.
This counter I used as ypos for the box. then for displaying heared text I made some adjustement with this counter as if line item is 2 then I gave one line space .
whereas for multiple lines i.e. if no. of line is more than 2 then I gave 2 line space above the text to fit it into box. as my text was always appearing below drawn box.
Thanks.
Shweta

SAPScript: Is it possible to print text on an angle?

Hello,
Is it possible to print text from the lower left corner to the upper right corner using SAPScript?
Thx.
Andy Jacobs

Hi Andrews,
it is possible to print by placing each characters in different line.
for example:
             A
              N
               G
                L
                 E
                  P
                   R
                    I
                     N
                      T
by using tabs and each character will be placed in an angular fashion using tabs
Cheers
VJ
Message was edited by: Vijayendra Rao

Print text vertically in SAPScript

Hi,
How to print text vertically in SAPScript?
Can we use controls for it?
Please help its urgent.
Thanks,
Madhura

You can print horizantally. using the following code
You know the total length of your text right.
You need to have conditions to avoid unnecessary spaces.
If &v_text(1)& is not initial.
ph &v_text(1)&
endif.
if &v_text+1(1) is not initial.
ph &v_text+1(1)
enddif.
if &v_text+2(1) is not initial.
ph &v_text+2(1)
enddif.
But we cant rotate letters to left . Not sure . Will explore on it and let you know.
Reward points if useful.
Regards,
Nageswar

Is it possible to print the content of a text entry box

I would like to print the content of a text entry box as I've created a 'notepad' in captivate 6. Is it also possible to save content of a text entry box to a word document/web page using javascript?

The content is stored in the associated variable of the TEB. Have a look at Jim Leichliter's website for instructions to get that variable out of Captivate.

How to add some html text between check boxes choices in SharePoint list?

I'm customizing "New Form" of a share point list using SharePoint Designer.
One of column is check boxes, and I need to add some break lines and text between choices, so the choice doesn't become cluttered.
e.g.
Choice 1 ^n
Date
Location
Choice 2 ^n
Date
Location
and so on...
Is that possible?
Thanks

I think your best option would be using InfoPath if you can.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Print some text before include in sapscript

Helllo Friends,
There is one standard include in sap script for example
INCLUDE &VBDKA-TDNAME& OBJECT VBBK ID 0001 PARAGRAPH HT
i want to print text before this like
'packsize ' INCLUDE &VBDKA-TDNAME& OBJECT VBBK ID 0001 PARAGRAPH HT
pls tell how is it possible
Regards,
Sunny

try like this by specifying character format..
<c1>'packsize '<c1> <c2>INCLUDE &VBDKA-TDNAME& OBJECT VBBK ID 0001 PARAGRAPH HT<c2>

[Help] Get Text Between words!

Hi,
I wanna to Get Text Between words,
I'm tring to something like this , can anyone help please ?
<?php
$data = "<a target='_blank' href='http://www.mysite'>Engineering</a><des>Description</des>
         <a target='_blank' href='http://www.mysite'>Accountant</a><des>Description</des>";
// Define Pattern
$linkS = "href='";    $linkE = "'>";
$titleS = "<link>";    $titleE = "</link>";
$desS = "<des>'";    $desE = "</des>";
//Get Text in the between
preg_match("/{$linkS}([^`]*?){$linkE}/", $data, $temp);
//First Group
$link1 = $temp['1'];
$title1 = $temp['1'];
$des1 = $temp['1'];
//Second Group
$link2 = $temp['2'];
$title2 = $temp['2'];
$des2 = $temp['2'];
//Third Group
//and so on
$Link1= strip_tags($link1);
$Link2= strip_tags($link2);
echo $Link1;
echo $Link2;
?>

Hi,
Check the following link:
http://www.sap-img.com/sapscripts/sample-sapscripts-label-printing-program.htm
you will get one sample program of sample label pring program.
hope it help you.
Regards,
Bhaskar

Conditional for a text input box NOT being null? Sorry for asking so many questions!

Okay, here's the situation. I'm creating a simulation of a form on which there are several text input boxes, 7 of which are mandatory fields. I know I can use a conditional to check whether the box has nothing in it by creating a null variable with no value and doing "if [box variable] is equal to [null variable] then", but the problem is that the validation captions I need to show need to be shown in order, that is to say that the caption for entering a value for the first box will always be shown if that box is null regardless of the contents of other boxes, the second will be shown if that one is null and the first one isn't etc.
When I was investigating this I noticed a post by Lilybiri saying that comparison with a null variable doesn't work for "not equal to" so I'm having a hard time figuring out how to show the captions based on priority. For example, to show the second caption I need to not only check whether the second box variable is null, but also whether the first one isn't.
It gets pretty crazy further along the line where I get to the 7th mandatory field and need to check whether the first, second, third, fourth, fifth and sixth boxes are NOT null and whether the 7th one IS. Help!
I did come up with one potential solution to this prior to posting: if I set a different advanced action for each input box losing focus which checks whether the variable is null and if so sets a "flag" variable to 0, and in the else set it to 1, I imagine I can then replace the "not equal to" with a check to that flag variable being equal to 1 (which means there is text in the box). I think this will work but I thought I'd check to see if there's an easier way first.

No it DOESN'T require everything to be on one slide. It just has to LOOK as if that's what it is.
I would suggest that it doesn't really matter how many Captivate slides are involved in the final solution, as long as it works the same way (or as close as possible) to the original software that you are simulating. Your users don't frankly know or care how you achieved the simulation. I guarantee they won't be thinking of you or Captivate.
In my experience, you can make creating elearning a lot more difficult than it needs to be in Captivate by trying to rebuild the app, rather than just simulating how it works. For example, thinking that if everything happened on one web page or screen in the app then it must also happen on a single slide in Captivate. The fact of the matter is IT DOESN'T need to work this way. And in some cases it might even be impossible to reproduce in Captivate this way.
So the quickest path to a solution is often to use multiple slides, which has the advantage of allowing you to "fix" certain things on screen (e.g. the contents of fields already visited) by using READ ONLY variable output in transparent captions, focusing only on one element of the interface that the user can interact with on that slide. It doesn't necessarily prevent you from moving back and forth between elements, just as you can in the original app. But it is far easier to create and maintain.
I'm not saying you wouldn't be able to pull this off on one slide in Captivate, but it is going to require a LOT of variables and Advanced Actions to build and debug. So the term Rapid Elearning becomes something of a misnomer if it takes you a long time to complete one slide.

How to print text/data in flex 3 using printer???Plz help...

   Hi,
          plz tell me the way to print text/data using printer in flex. I tried the FlexPrintJob class. but it takes object of a container to be printed & prints the visible content of that container(along with scrollbars), bt i want to print all contents of the container(including invisible).
      I have tried to print bitmap image through FlexPrintJob but it takes lot of time for spooling... So plz help me out in printing(fast with all content) in flash
I am using flex 3 (flex Builder 3 IDE).
Thanks in advance!!!

Hi Sagar,
Don't worry You can use the below work around to print all the contents of the Container including the invisible contents under scrolll with out scroll bar..
So what the idea here is we are seeting the container height to full size with out scrolls before sending the container object to printer and as soon as you print the object you are restoring it to the original height with scrolls...so that you can print the full contents without scrolls...
You may have doubt that by chnaging and restoring the size the user may see momentary resize of the container but it is not so as it is a fraction of a second and user cannot notice this change... Give it a try ..I had already run into this problem recently and I have found a work around for this which is as below:
// Here mainContainer is the container or box id the contents of which you want to print
   private function doPrintContainer():void
    var printJob:FlexPrintJob = new FlexPrintJob();
    if(printJob.start() != true) return;
    try
     var mainContainerHeight:int = mainContainer.height;
     //Increasing the height of the desired component to be printed.
     mainContainer.height = mainContainer.measuredMinHeight;
     mainContainer.verticalScrollPolicy = "off";
     //Adding the resized Component to our FlexPrintjob and then sending the print request
     printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);
     printJob.send();
     //Resizing the component back to normal size
     mainContainer.height = mainContainerHeight;
     mainContainer.verticalScrollPolicy = "auto";
    catch(error:Error)
                 trace("Error : " + error.message);
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

How to print text on container using oop on alv list

Hello Guru's,
         pl guide me how to print text on container using alv list-display which have interactive events using     oop classes/methods ...
                I want to print hard coded text on coantainer , on double clicking it will call another screen.
Pl Help..
Message was edited by:
        paresh sonavane

Hi Paresh,
       1.      Go to the Layout and Create One custom container box and give name it.
        2. Custom Container is the one type of tool and its used for Displaying the Reports
            with the use of ABAP Objects.
        3. Go to se38 and Write The Following Code.
tables ZTEAM_GD.
DATA : OBJ TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
       OBJ1 TYPE REF TO CL_GUI_ALV_GRID.
DATA IT_TEAM LIKE TABLE OF ZPLAYER_BAT_DET       .
SELECT * FROM ZPLAYER_BAT_DET INTO TABLE IT_TEAM.
CREATE OBJECT OBJ
EXPORTING
    CONTAINER_NAME              = 'ALV'.          -
> Give ur Container Name
CREATE OBJECT OBJ1
EXPORTING
    I_PARENT          = OBJ.
CALL METHOD OBJ1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
    I_STRUCTURE_NAME              = 'ZPLAYER_BAT_DET'
CHANGING
    IT_OUTTAB                     = IT_TEAM.
*CALL METHOD OBJ1->SET_DROP_DOWN_TABLE
EXPORTING
   I_STRUCTURE_NAME = 'ZTEAM_GD'
CHANGING
   IT_OUTTAB        = IT_TEAM.
CALL SCREEN 9000.
*&      Module USER_COMMAND_9000 INPUT
      text
MODULE USER_COMMAND_9000 INPUT.
CASE SY-UCOMM.
WHEN 'EXT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPU
Thanks.
Reward If Helpful.

IS there a way to fix the issue with text list boxes where they shift (empty space is smaller than the text size) when two text lsit boxes are side by side?

Currently I have a webpage I designed for a company where I have multiple text list boxes side by side for the purpose of displaying data in each one based on a category in the database. So a text list box for the primary key, name, serial number, etc. I have to use Firefox as it typically works best for printing and functionality for the page. The single issue we are having is that in Firefox if the field is null as far as text the text are shrinks meaning all the data in that list box shifts up and is no longer in line with its congruent data in the other text list boxes. In other browsers that's not a problem and everything stays lined up regardless of whether there's text in the box or not.
Unfortunately I cannot provide a link but if contacted I will provide screen shots.

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Printing Text between boxes in sapscript

Similar Messages

Maybe you are looking for