Printing to wireless printer hangs PC and does no print job is output from printer

1) Hi I have the following configuration:
- B110 all in one wireless HP device with a static IP
- AMD 64 desktop running Window XP professional with the latest service packs and patches, also running Symantec Firewall and Antivirus and also a static IP address
2) I can access using HTTP the printer from my desktop and perform a scan, inspect the printer ink levels and configuration all ok
3) I have installed the printer drivers on the desktop and executed all tasks in the setup wizard, when the wizard checks communication with the printer some errors are detected that the some ports may be blocked so I:
3.1) Uninstall the software
3.2) Reboot the PC and printer
3.3) Disable Symantec firewall
3.4) Disable windows firewall
3.5) Re-execute the installation of the HP software
3.6) The install completes with no errors
4) When I attempt to print to the printer using any form of the following:
4.1) Windows test print page
4.2) HP test print page
4.3) MS word document
This occurs:
4A) The printer initalises and tranistions to a state of printing
4B) The PC hangs
4C) The printer does not print anything
4D) The pc requires a hard reset to recover from this
5) I have tried using both wireless and the ethernet port from the PC and each time the above in point 4 happens
6) To test I have a dual core Intel laptop running the exact operating system as the desktop with identical Symantec firewall and Antivirus software that I have installed the printer software onto that works fine with no issues whatsoever.
Any ideas please?

Hi,
Did you try the HP priner diagnostic tool?
If your are running XP 64 bit then your printer is not supported.
Be sure to apply all of the updates that are listed.
The other thing to try is to completely remove all of the HP printer software. Now reinstall the software but instead configure and connect the PC using USB. Does that work?
Please elaborate more on the ethernet connectivity. I am a bit puzzled since none of the B110 printer have ethernet ports.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

The appearance of the printer in the Default view of the Add printer window relies on a protocol called Bonjour. There have been quite a few users who upgraded to Yosemite only to find that their wifi printer is no longer visible. Until Apple resolves this issue you can add your printer using the LPD protocol. To do so you will need to determine the IP address being used by the MX890. This can be done via the touch panel under Device Settings > Network Settings.
Once you learn the IP address then on the Mac you can click to add the printer and select the IP icon. Here you can enter the IP address, set the Protocol to Line Printer Deamon and leave the Queue field blank. Then change the name to Canon MX890 and in the Use menu, browse for the Canon MX890 series driver. Then click Add to complete the printer creation.

HT203164 I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/

I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/1 other printer as well, which I used before for this exact thing w/no problem.

Try cleaning the print head with rubbing alcohol wipe, then replace your print head. Keep pushing the Ok.
Go to this link and HP shows you how.
support.hp.com/us-en/document/c01643079
Lucky for me it worked!

Trying to download OSX Lion from AppStore on my iMac but it just hangs everytime and does not download

Trying to download OSX Lion from AppStore on my iMac but it just hangs everytime and does not download

I downloaded Lion on my 17" Macbook Pro and it took about 17 hours. At first I thought it wan't downloading so I cancelled. The next day I tried again and let it ride for the duration; If the status bar is showing that it is downloading (the bar at the bottom will show some blue after about an hour), then be patient. It will download. The installation takes roughly 30 minutes.

HP Laserjet p1102w blue WIRELESS light keeps blinking and computer is not able to locate the printer

Have been using the printer on wireless and it was working fine until I had to cancel a print and might have accidentally press wireless button and "X" cancel button together and havn't been able to print since.
Did everything:
- update firmware: LJP1100_P1560_P1600_FW_Update.dmg
- update printing software: HP-ePrint_v2.4.1.dmg
- Reinstall wireless setting
But the printer will now shot from Add new printer- Bonjour setting.
The odd thing is When I switch the wifi on computer on and off the printer will show in Add new printer- Bonjour setting, for a second and disappear again.
The printer still works via cable.
There were 3 machine using the printer via wireless now has all same issue.
Thank you for any help or tip!

Hello eeoorhee,
Welcome to the HP Forums.
I see that you are having an issue with connecting the printer over the wireless connection.
I have a few steps that we can take to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I also suggest that you do an uinstall of the software and drivers and reinstall. Please click on the link that I have added for when The Printer is Not Found During Wireless Installation.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My printer has a ornge led blinking and does not allow me to print any document. how can I fix it?

My printer is showing an error and the orange led is blinking ans dos not allow to print any document

Hello HP-1400. I understand your printer is an error state, which is preventing you from printing. I will do my best to assist you! Please provide the following information so I can perform troubleshooting:
The printer model number. For assistance in locating this information, please reference this HP document: http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bpy21016
Your operating system. If you require assistance locating this information, please reference this website: http://windows.microsoft.com/en-CA/windows/which-operating-system
Please respond as soon as possible. I'm only here to help!
Mario
I worked on behalf of HP.

Hp Laserjet pro 100 m175mw heats up very fast and does not come close to the specified print speed.

I got myself the above all-in-one colour printer and have realised that the printer heats up very fast. After about 15-20 prints (sent in smaller files as advised by the manual), the printer heats up and each page took almost 2 mins to print. Frankly, I have never encountered such problem with any of my previous three laser printers. Anyone can point out what could be wrong or at least what can I do to reduce the problem from popping up.
Personally, I suspect this is a hw design problem....will be contacting HP too see what is their input.
Also the actual printer speed is not even close to the spec stated on paper.
regards
Colossus

Hi Colossus,
Follow the steps below.
1. Turn off the printer, and then remove the power cable from the back
2. Wait about 2 minutes, and then plug the power cable directly into the wall outlet
3. Turn on the printer
If you still have the same issues you will need to contact our techincal support for additional troubleshooting. The number for US/Canada is 800-474-6836, if you are outside the US/Canada region click on the link below to obtain number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Actual layout of PDF output from printer is very small

Hi there,
I am currently sucessfully migrate Oracle reports from 6i to 10g (10,1,2) and the result looks fine from IE browser. When I try to print the report from printer, the image is occupied upper part of Letter size pager and it is very small which I even cannot read it. The following is my code snap:
SET_REPORT_OBJECT_PROPERTY(p_repid,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(p_repid,REPORT_COMM_MODE,SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(p_repid,REPORT_DESTYPE,CACHE);
     SET_REPORT_OBJECT_PROPERTY(p_repid,REPORT_DESFORMAT,'PDF');
     SET_REPORT_OBJECT_PROPERTY(p_repid,REPORT_SERVER,g_server);
     v_rep := RUN_REPORT_OBJECT(p_repid);
I didn't change any in my report rdf from 6i but only open and save it using 10g report builder. I also read threads posted but couldn't find the answer. Can anyone help me to resolve my issue.
Thanks
Jeffrey

It happens on all machine. We use browser to launch the application and the report is called from forms (10.1.2). We didn't change any code in report and neither the fonts (Tahoma). In 6i, client server environment, windows can find the font. I guess in 10g web environment, the font is not as default. HP Laserjet 8000N is a network printer which I use to testing my report. everything is fine in 6i but not 10g. Here is my question.
1. How to check printer setup? Should I use the default font from Linux instead of Tahoma?
2. I found a note in metalink, Note:356221.1 which explains the procedures to deploy reports from windows to Linux. I am not sure my problem is related to the font or something else...
Thanks for you reponse.

How can I fix my MacBook Pro losing wireless connectivity with Epson Stylus NX625 printer. It will work once and then I get an error saying the printer is not connected.

I can connect to my Epson Stylus NX625 through my wireless network and print a page or two, but then the next time I go to print it says that the printer is not connected. Any fixes? I have tried deleting the printer and re-adding it to my MacBook Pro OS X version 10.9.4, but sometimes it doesn't even find it, and other times it says it is connected, but when I go to print it says not connected. Very frustrated. I have also installed the latest drivers, etc.
What now?

Your computer is going to run hot while playing CPU/GPU intensive games - it should heat up and the fans should be noticably loud. As to why it's 'crashing' - can you post a kernel panic log? You may have some third-party kexts that are causing the problems.
Clinton

Wireless connection between computer and HP Officejet 6600 e-All-in-One Printer.

I just bought an HP Officejet 6600 e-All-in-One Printer - H711a. I want to have a wireless connection between my computer and my printer in order to place the printer in a different room. The instructions say that I need to give the name of my wireless network. Do they mean that I need a wireless internet connection? I absolutely don't want to go wireless on the internet. How do I go about this?

Replacing your wireless router now try.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I have iMac OS 10.6.8 and FF 6.0.1 when I print pages, the type is large and does not print on the page. Safari does not have this problem. How do I fix this, or return to lower FF version ?

To clarify, when I print the text is so large that it exceeds the page width. I can print same doc using Safari without any problems

The sound seems very faint but can here static on playback.

On my printer the wireless sign is blinking and it want let me print.

i need help with getting my printer to start back printing again please help me.

What printer?
What router?
What operating system?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Why can I not print multiple files to one sheet and create a PDF of that format via Print dialogue on Mac? Very important part of workflow!!!!

Try this if you use mac.
Create a multiple page PDF. Three pages.
Go to print. - Multiple pages per sheet so that you see all three pages on your sheet to be printed.
At this point, on a windows machine, you can print this as a PDF. On Mac, it only lets you save as PDF (Not with the format selected).
WHY has this functionality been removed from the Mac version of Acrobat XI??? Adobe?

Jon,
Unfortunately, Rave's response is quite incorrect on two major points.
The Adobe PDF PostScript printer driver instance was indeed part of the Macintosh version of Acrobat Pro until a few years ago.
However, it was NOT Adobe that killed the feature. Apple did! In one of the MacOS updates, Apple fully removed the capability that Adobe had to support this virtual printer. There was nothing that Adobe could do about this, regrettably. Adobe didn't cripple anything. Complain to Apple!
However, Adobe does provide a replacement for it that will yield similar results, but it is not available in Acrobat or Adobe Reader!!! In most applications' print dialogs (such as Word) - which printer you select is irrelevant, click on the PDF button and select the Save as Adobe PDF option. This will save your document as a PDF file with Adobe technology. But again, this is not available from with Acrobat or Adobe Reader.
However, you should note that the process that you previously followed and you would like to continue to use is commonly referred to as “refrying a PDF” and is strongly discouraged even where it continues to work under Windows. Why? The print function of Adobe applications including Acrobat and Reader is optimized for PostScript for printing, not for creation of PDF. Resultant PDF files have lost any transparency (it has been flattened) and all color management has been lost.
What you are really trying to do is to create a pre-imposed PDF file from an existing PDF file. Going through PostScript was and still is a very bad idea.
There are some third party plug-ins to Acrobat, such as Quite Imposing (Quite Software, <http://www.quite.com>) and PDF Snake (<http://www.pdfsnake.com>) as well as some “free” (you get what you pay for) solutions you can look up on the web that can do PDF imposition without ruining your PDF via PostScript.
Hopefully this can assist you.
- Dov

Can I make a wireless Windows domain? And does Group Policy work to limit domain accounts' capabilities?

The first, most important question of this thread is if I can form a wireless domain or if I have to do it wired.
If it matters, I have a Linksys E1200 router that does wireless and wired.
My second question refers to Group Policy. Is this the way domains limit their user account's capabilities? Because I was planning on making a domain, so that I could have unified user accounts that I could control from the server, limiting what those accounts
can access for further security. Is this what Group Policy does, and how would I move with starting that?

Hi Adrian,
>>The first, most important question of this thread is if I can form a wireless domain or if I have to do it wired.
Just as Alan suggested, Active Directory domains support both wired and wireless connections.
>>My second question refers to Group Policy. Is this the way domains limit their user account's capabilities?
Group Policy is an infrastructure that allows you to implement specific configurations for users and computers. Group Policy settings are contained in Group Policy objects
(GPOs), which are linked to the following Active Directory directory service containers: sites, domains, or organizational units (OUs). The settings within GPOs are then evaluated by the affected targets, using the hierarchical nature of Active Directory.
Consequently, Group Policy is one of the top reasons to deploy Active Directory because it allows you to manage user and computer objects.
Regarding group policy, the following link and articles can be referred to for more information.
Group Policy for Beginners
http://technet.microsoft.com/en-us/library/hh147307(v=WS.10).aspx
Group Policy Planning and Deployment Guide
http://technet.microsoft.com/en-us/library/cc754948(v=WS.10).aspx
Group Policy
http://technet.microsoft.com/en-us/windowsserver/bb310732.aspx
Best regards,
Frank Shen

How to get job status information from printer without using printer's web interface

Hi, all!
I need to resolve problem with logging my printer hp lj 700 m712.
I configure syslog on it, but it sending only status messages ("peripheral low-power state" - for exapmle), I need to register the job status of printer's job on my server.
How can I do that?
Can you help me?

Hi Lexabb,
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP LaserJet Enterprise 700 M712 printer series is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet Enterprise 700 Printer M712dnpage helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printing to wireless printer hangs PC and does no print job is output from printer

Similar Messages

Maybe you are looking for