Printing with a grid

Is it possible to print a photograph with a grid overlaid on it?

There is no specific method on the API to draw the grid, but you can build it dynamically and use for example the addLinearFeature method to add the grid to your map.
Joao

Similar Messages

Printing with ALV Grid

Hi,
I am using ALV List and ALV grid in one of my custom reports.
There is no issue with ALV List when I print the report after running the program.
But when I use ALV Grid , the report runs good and when I try to print the report I get short dump "OBJECTS_NOT_CHARLIKE" in program "LKKBLF99" of the main program "SAPLKKBL".
I am using the function module "REUSE_ALV_GRID_DISPLAY" to run the report using ALV Grid and I get the above short dump when I try to print the report.
Can anyone help me please?
Thanks,
Ashok.

Hai Ashok
Try with the following Code
*& Report ZALV_GRID                                           *
REPORT ZALV_GRID .
TABLES: MARA.
TYPE-POOLS : SLIS.
Data declaration
DATA: BEGIN OF I_MARA OCCURS 0.
        INCLUDE STRUCTURE MARA.
DATA: END OF I_MARA.
DATA: V_REPID LIKE SY-REPID.
selection-screen
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS : S_MATNR FOR MARA-MATNR.
PARAMETERS: P_MTART LIKE MARA-MTART DEFAULT 'ROH'.
SELECTION-SCREEN END OF BLOCK B1.
initialisation
INITIALIZATION.
S_MATNR-LOW = '1400'.
S_MATNR-HIGH = '1500'.
APPEND S_MATNR.
V_REPID = SY-REPID.
start-of-selection
START-OF-SELECTION.
SELECT * FROM MARA
    INTO TABLE I_MARA
    WHERE MATNR IN S_MATNR AND
          MTART = P_MTART.
CHECK SY-SUBRC = 0.
end of selection
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = ' '
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
   I_STRUCTURE_NAME               = 'MARA'
IS_LAYOUT                      =
IT_FIELDCAT                    =
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
TABLES
    T_OUTTAB                       = I_MARA
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks & Regards
Sreenivasulu P

Issue with ALV grid print preview/spool

Hello everyone,
I am working on a report and I am having some issues with ALV grid. Currently in our DEV and QA environments the user can run the report, view the ALV grid, and print the grid without any issues.
However this isn't the case in the Prod environment. The user is able to run the report and view the grid without any issues. But when they click print preview or click print, the spool is incorrect. It shows the proper values from the grid, but the first field is reduced in length. Rather than showing a numeric field of length 10 it shows 99999999# or 99999999...
The programs are identical through every environment, including user parameters, formats, and spool settings. I have been told printing grids may have some issues, does anyone have any advice or dealt with this issue before?
I appreciate the help.
Thanks,
C

I was waiting to hear from the functional team on the matter and no one has mentioned any more issues. I am assuming the problem is solved. I just noticed the thread was still un-answered and wanted to give an update.
Thank you for you help Vijay.
Regards
C

Re: Increasing Column Header Length While Printing in ALV Grid

Hi
For some column headers in a report, the translations in Turkey are more than 40 characters, because of which while executing the report in TR language, the column header is getting truncated.
So, I would like to know if we can increase the column header length while printing the ALV Grid(OO ALV) output.
Or else, Is there any way where we can divide the column header into 2 rows.
Please let me know.
Thanks and Regards,
Vishwa.

Jose and Sivaram,
Thanks for replying.
The problem we have is with the column headers, there is a limit of 40 characters for the column header in ALV reports. So, increasing the outputlen also did not help.
Regards,
Vishwa.

MG5460 blurry vertical printing with PGBK ink only?

Hi All,
Have a not so old (replaced an old MP830 which rocked!) MG5460 printer which has an issue printing vertical stuff aligned correctly, but only in the PGBK ink.
So on the printers test page, at top is the PGBK test with a grid of lines, horizontal and vertical, it is about an inch in height. So at the top of this grid the vertical alignment is fairly accurate, then about the 4 horizontal down it starts to deviate for a few horizontal lines, and then starts to come back into alignment.
Have done head alignments although only thing i'm not sure if is when it says insert specified paper, is that anything special or just plan copy paper??
Any other suggestions or is it a send back for service?
I have a scan of the printers test page here http://tinypic.com/r/2eg5yr6/8
Thanks all
Art

https://www.youtube.com/watch?v=pEkKGBUSwNg
Once you get the head out follow this guys directions.

Cannot print without the GRID showing thru...

Apparently there is no way to print an imported Excel Sheet without the GRID.
Every sheet is imported as a single table with it's GRID showing up as a visible border. Simply, it does not recognize the difference between a GRID and a BORDER.
The only way to get rid of the GRID, is to completely reformat the document by taking out all BORDERS and applying new ones.
That will not work! No one is going to spend time reformatting a document that works perfectly in Excel.
Until this is solved, Numbers will seldom be used.

I have a 20 tab excel workbook with several printed pages on each tab that I work with regularly. It has many text boxes, borders thicknesses,and hatches. It imports just fine into numbers with a little tweeking of content scale to get it to print one page wide. I tried cahnging the color of the cell borders to white and cell borders to none. Guess what? It takes out ALL the fancy ones as well.
I am printing and submitting these sheet to a government facility and they are not complaining (so far) with ghost grid lines, But it sure would be appreciated to have more control over the printing of these unneeded gridlines.
I really don't want to recreate the whole thing and am trying to abandoned my addiction to excel all together.
Message was edited by: KrrP
Message was edited by: KrrP

Printing Album in Grid View

Is it possible to print the Alban Grid view, end up with just a page of album covers with the album name under each album cover. Ronnie

Which particular version of iTunes are you running, john? 10.6.1.7, 10.6.0.40, or something earlier?

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?

Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry

Printing the document grid does not work

Hi,
I got here a lot of master documents. The design is built with a squre document grid. I need to print or export it as PDF. But activating the checkbox does not work. Is it possible to print it? Ruler guides and the base grid are working. But I need to print the document grid.
Is there any possiblility to to this?
Thanks
DerSiedler

Printing the document grid is not an option, but you might be able to work around it by creating your own grid using Layout > Create Guides... then printing the visible guides.
I'd do that on a separate layer. If you want the grid, but not other guide, make a real grid with colored strokes using step and repeat, again on a separate layer.

How do I use a regular printer with my iPhone?

How do I use a regular printer with my iPhone?

you can't unless it's an AirPrint enabled printer or you purchase a 3rd party app like printopia.

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

Unable to print with my Canon PIXMA IP 4700 and JetDirect network appliance

After many tries I decided to post my question.
I have a Canon PIXMA IP 4700 connected to the network with a Jetdirect 175X box. So I tried to add a new printer with a "HP Jetdirect Socket" port. I have previously installed the driver from the official website. The test page is staying on the spooler.
I also tried with LPD port (supported by the Jetdirect box) and IPP but nothing is working.
When the printer is directly connected with USB, it's working fine. Printing from my others Windows computers is working fine too since many months.
Thank your for your help.

Hello and welcome to Apple Discussions.
Your problem is being caused by the Canon driver. It cannot be used when the printer is connected to the USB port of a 3rd party print server, or if shared by Windows.
The solution is to use a driver like Gutenprint or PrintFab. Gutenprint is preferred because it is free (it ships with OS X) however the iP4700 is not listed as a supported model. The iP4600 is listed so you could try selecting this model in the Print Using menu (shown as Canon PIXMA iP4600 - Gutenprint v5.2.3). If the iP4600 Gutenprint driver does not work that well then you could look at using [PrintFab|http://www.printfab.net] which does support the iP4700. It costs €49 but there is a 30 day trial so at least you can try it before committing to buying.
Another option would be to use a Airport device, like the Express, instead of the Jetdirect print server. With the printer connected to its USB port you can then use the Canon iP4700 driver on the Mac.

How to print with HP Deskjet 2510 with Imac G5 on Tiger ?

Hi Folks
I desperately need some helping hand....
Today my old trusty printer died (HP 1510 print/scan/ copy) and I ran to buy another one because I need to finish some tax paperwork.
In a mad hurry, I didn't pay any attention to tech specs and I went home with brand new HP DeskJet 2510 All In One device. But !!! : ((
In my home office I still use Imac G5 with 10.4.11 which is still pretty good comp for office work but I found out that the HP 2510 don't officially support my Imac with Tiger. Only from 10.6 and later.... I know that Imac G5 can't run nothing above 10.5.
So, is there any way to "force" HP 2510 to somehow recognize my Imac G5? In "about my mac" on USB port, the HP 2510 is visible ....
Many thanks in advance.
Cheers,
Sven

So, is there any way to "force" HP 2510 to somehow recognize my Imac G5?
You may be able to get it to print with something like this:
http://gimp-print.sourceforge.net/MacOSX.php
although i do not see taht modle on the "Supported Printers" page. You might look again.
BUT that workabout does not support scanning, only printing.
I think you need to return the printer and look to either Canon or Brother. Brother especially has been better about suporting older Mac OS versions but you'll still need to get a model number and search the maker's site BEFORE buying to see if they show older drivers for download.

Remote printing with iPad

I have installed the HP Print app on the iPad and have no issues printing when I am on the local net work. When I try and print when I am not on the network I receive an error that states: "oops we cannot complete the print job please try again" and there is a retry or cancel selection. My printer is set up with an email address. I can print from my Samsung note 2 using the HP Print app with no issues either on the network or off. Any ideas?

Have you tried the ePrint mobile app?
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/How-to-Print-with-an...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

Printing with a grid

Similar Messages

Maybe you are looking for