Printouts for multiple forms in one click

Hello Experts,
I have one print program for Adobe form. Here If I enter 10 pernrs in the selection screen.. I will get 10 adobe forms in the output. By clicking right/left arrow in the application tool bar (which appears if there are more than one form generated), I can see all forms and I can print each form.
Now the problem is, I got the requirement where I can click on one push button or icon on the output screen and It should print(sending to Printer) all 10 forms in one attempt.
Please let me know if you need any further information on this.
Note that its not about output display.. It should be remain same. The solution required only for the Paper printouts in one click.
Thanks,
Naveen Inuganti.

Same question asked here: Printing all Adobe form in one attempt
Two things I can add here:
- if you want to achieve a better performance, set up the caching, the forms will then not be reloaded during each printing, the cached version will be used instead. Be careful, that may mean the form will behave a little crazy during the development (that is why I always turn off the caching on the development system)
- if you want to be precise as possible loop at the source table outside the printing block, get the data and next inside the printing block (JOB_OPEN and JOB_CLOSE) loop at the data again and ask for the prints. Since everything is inside one block, it will be exchanged with the webservice (ADS) in one call
Hope that helps, Otto

Similar Messages

Multiple forms in one region???

Hello guys,
I have created application with couple of pages, but now I have one critical issue with one page.
In this page I have created multiple forms in one region by customize templated, that is working very much fine, but I unable to insert/update data into the DB table through this page.
My sinceraio is something like that, I have couple of tables, where p_id is common in all of the tables, now this issue page I have created multiple(2) forms in one region where both the forms are built but two separated DB tables in one both of them has one column in common ie p_id, the value of p_id is processed from the previous page.
I am aware of the apex limitation about one table for region and hence I created View from this two different tables and above that created INSTEAD OF trigger for insert and update purpose as through I can't, so.
got the help from this below forum:-
Report & form on Multiple table
But still I am unable to get any sucess.... if somebody can help me out...????
I have created same example on apex workspace... let me know if you need any credentials than...???
Thanks
regards,
Kumar

Hi again,
I'm getting error as :-
ORA-20508: Unable to perform insert operation. -22816 ORA-22816: unsupported feature with RETURNING clause
Error Unable to process row of table RENAL_BIOPSY_SYMPTOMS.
OK
I have created view on 2 tables as :-
CREATE OR REPLACE FORCE VIEW "RENAL_BIOPSY_SYMPTOMS" ("P_ID", "RENAL_BIOPSY_CONDUCTED_YN", "DT_CONDUCTED", "CONFIRMED_BY", "REPORTED_ON_BY", "INSTITUTION", "RESULT_TYPE", "COMMENTS", "HEMATURAI_YN", "HEMATURAI_DT", "MICROHEMATURIA_YN", "MICROHEMATURIA_DT", "PROTEINURIA_YN", "PROTEINURIA_DT", "HYPERTENSION_YN", "HYPERTENSION_DT") AS
SELECT
RB.P_ID,
RB.RENAL_BIOPSY_CONDUCTED_YN,
RB.DT_CONDUCTED,
RB.CONFIRMED_BY,
RB.REPORTED_ON_BY,
RB.INSTITUTION,
RB.RESULT_TYPE,
RB.COMMENTS,
SY.HEMATURAI_YN,
SY.HEMATURAI_DT,
SY.MICROHEMATURIA_YN,
SY.MICROHEMATURIA_DT,
SY.PROTEINURIA_YN,
SY.PROTEINURIA_DT,
SY.HYPERTENSION_YN,
SY.HYPERTENSION_DT
FROM
RENAL_BIOPSY RB
INNER JOIN
SYMPTOMS SY
ON
RB.P_ID=SY.P_ID
and created INSTEAD OF trigger on the above view as:-
CREATE OR REPLACE TRIGGER "RENAL_BIOPSY_SYMPTOMS_TRIGGER"
INSTEAD OF INSERT ON "RENAL_BIOPSY_SYMPTOMS"
FOR EACH ROW
BEGIN
DECLARE
PAT_ID NUMBER;
BEGIN
INSERT INTO RENAL_BIOPSY (RENAL_BIOPSY_CONDUCTED_YN, DT_CONDUCTED, CONFIRMED_BY, REPORTED_ON_BY, INSTITUTION, RESULT_TYPE, COMMENTS)
VALUES (:NEW.RENAL_BIOPSY_CONDUCTED_YN, :NEW.DT_CONDUCTED, :NEW.CONFIRMED_BY, :NEW.REPORTED_ON_BY, :NEW.INSTITUTION, :NEW.RESULT_TYPE, :NEW.COMMENTS)
RETURNING P_ID INTO PAT_ID;
INSERT INTO SYMPTOMS (P_ID, HEMATURAI_YN, HEMATURAI_DT, MICROHEMATURIA_YN, MICROHEMATURIA_DT, PROTEINURIA_YN, PROTEINURIA_DT, HYPERTENSION_YN, HYPERTENSION_DT)
VALUES (PAT_ID, :NEW.HEMATURAI_YN, :NEW.HEMATURAI_DT, :NEW.MICROHEMATURIA_YN, :NEW.MICROHEMATURIA_DT, :NEW.PROTEINURIA_YN, :NEW.PROTEINURIA_DT, :NEW.HYPERTENSION_YN, :NEW.HYPERTENSION_DT);
END;
END;
ALTER TRIGGER "RENAL_BIOPSY_SYMPTOMS_TRIGGER" ENABLE
My apex workspace is :-
ws :- newapex
us :- [email protected]
ps :- kg
and application as "BeforeDemo_Application" with page as 6(the ISSUE page).
Any help guys..... appreciated..!!!!
Regards,
Kumar

Deleting multiple items in one click

Hi Guys
My iTunes has been reset and has for some reason added all the songs on my computer twice = about 120GB when it should only be 60GB.
I'm sure there used to be a way to delete multiple items in one click but the only way I can seem to do it is by doing it individually after click view duplicates, this clearly isn't practical for over 5500 songs.
Thanks for the help!

Thanks for the answer.
If I understand it correct, If I have an invoice of 10+ items, there is no possibility to delete 5 items for example with one click?
I have to the delete the 5 items one by one or delete the whole invoice and start again?
Thanks.

Is it possible to combine multiple Pur Reqs for multiple materials to one vendor into one PO through MD07?

We have material planners who use MD07 (traffic signal screen) Stock/Requirements List, Collective Access tab to review material requirements by MRP Controller. Once the list is created, they select individual materials and review them in MD04. In a lot of cases, Purchase Reqs (PRs) are reviewed and adopted into POs individually for each material. Sometimes they will combine multiple PRs for one material into one PO. This is a good practice. However, from what I have found, it is not possible to combine multiple PRs for multiple materials into one PO. If this was done it would dramatically reduce the number of POs that we are issuing to suppliers. Problem statement: We issue too many POs which causes additional influxes down the line (receiving dock/goods receipts processing, receiving issues, invoices, invoice issues, etc.). Does anyone know of a way to address this problem without a major overhaul in approach or customization of the system? Thank you in advance!

Hello Michael
As far as I know, this is not possible directly from MD07, only from the MM transactions.
The following thread suggests the following procedure to convert several PRs into one PO:
Conversion of multiple PR into single P.O
Drag and drop the first PR from the item overview to the shopping card on top of ME21N,
then open the PO detail delivery schedule tab and drag and drop all other PR to the shopping card shown in the schedule tab
You can use the same procedure, calling the order conversion from MD07 and then drag and drop another PRs into this PO.
BR
Caetano

Submiting multiple forms with one button

I have a form that has a cfform within it. The cfform has a
cfloop in it that includes an id and a dropdown list box that
includes a new id. I want to transfer one id to another. I want the
user to be able to click on one button that would update all the
rows in the table with the new id.
If there are 3 rows in the query, the user would select an
entry in a dropdown for each row and upon clicking on the submit
button all three rows would be updated with the id selected from
the dropdown.
Any suggestions?
Thanks for the help!
Gary

There isn't a way to set this up using the Paypal payment integrated into FormsCentral using seperate forms for each child, you can set up one form so they can register additional children and then pay in one session, but if you need each child to be a unique form submission it can not be set up to pay for multiple at once.
Thanks,
Josh

Creating a template for multiple forms

     Is it possible to create a template to use in multiple forms
Thanks
Roger

Hi Roger,
FormsCentral does not currently support user-defined form templates. However, there are a couple of options available that you might find useful.
To define/use a template for an entire form:
1. Create a form that will act as your template.
2. To create a new form based on that template simply click the "Duplicate" button in the My Forms dashboard.
The new form will contain the same set of form items as the template form.
To define/use a template for one or more form items that are common to many of your forms:
1. Create a form containing the template form items.
2. To use the fields in different forms you can:
     i. Open the template form.
     ii. Select the form item(s) and type Ctrl+C.
     iii. Create or open the target form.
     iv. Type Ctrl+V to paste form items into the target form.
Regards,
Brian

HELP: Customizing ESS Leave Request for multiple entries in one submission

Hi experts,
I appreciate help on this urgent problem. We're on ECC6 with EP7. My customization requirements are below:
1) Allow multiple leave entries to be submitted at one go. Standard ESS only allows one date range entry per submission. We've customized the Webdynpro Leave request form to allow multiple entries in table form.
Assuming there's 3 requests:
R1 ~ 01-Oct-2007
R2 ~ 03-Oct-2007
R3 ~ 05-Oct-2007
Whenever user clicks 'New Entry' button, Webdynpro will call bapi PT_ARQ_REQUEST_PREPARE to generate a new request ID.
When user clicks on 'Review' button, I will loop at the requests internal table and check each of the entries, which is an individual request, via BAPI PT_ARQ_REQUEST_CHECK. Am I doing correctly so far?
The checks return no error. Next comes the problem. When I click the 'Send' button, I will loop at the request IDs (in ascending order) into BAPI PT_ARQ_REQUEST_EXECUTE. I will get a dump, saying that the object cannot be found. Debugging shows that it cannot find the first request ID (R1) in the memory. I found that if I sort the request IDs in descending order, it will be able to find the last request (R3) and could process it. However, when it comes to the 2nd last request (R2), it will give me the same dump saying that object can't not found. Both R1 and R2 cannot be found whereas only R3 can be found.
In overview, the logic we adopted is like this:
1) PT_ARQ_REQUEST_PREPARE-CREATE (R1)
2) PT_ARQ_REQUEST_CHECK (R1) upon clicking 'New Entry' Button
3) PT_ARQ_REQUEST_PREPARE-CREATE (R2)
4) PT_ARQ_REQUEST_CHECK (R2) upon clicking 'New Entry' Button
5) PT_ARQ_REQUEST_PREPARE-CREATE (R3)
6) PT_ARQ_REQUEST_CHECK (R1, R2, R3) upon clicking 'Review' Button
7) Loop PT_ARQ_REQUEST_EXECUTE ( R3 - Returns OK, R2 - Returns object not found and terminates, R1 - not processed because execution terminated by R2).
Can anyone please advise me how I should go about changing the BAPIs? Or are the CLASSes/BADIs to be changed?
<b>Points will be rewarded for helping with this urgent requirement.</b> Thank you.
Regards,
Damien

Hi Kiran,
Thanks for replying. My guess initially was also that the requests are overwritten.
I heard of another company's implementation who did the same concept and was able to do it. Unfortunately, I'm unable to get any information from them.
Initially, my frontend programmer and I thought of adopting the 'dummy checks' methodology. i.e. Do dummy checks when clicking 'New entry' or 'Review' button. This is to ensure that the entries were entered correctly at front end. Only when the user clicks on the 'Send' button, my BAPIs take in a table of request entries and perform the Request_Prepare&Request_Check&Request_Execute one at a time.
This may be expensive as there will be double the processing needed. One set for dummy checks and one set for the actual backend processing.
Is there any way that I can create multiple requests in 'transcient' state so that it won't be overwritten and I can still find it when I call the BAPI PT_ARQ_PREPARE_EXECUTE? PT_ARQ_PREPARE_EXECUTE only takes in request IDs instead of request structures.
Thanks again, Kiran, for replying. Have a good weekend.
Regards,
Damien

Create multiple folders with one click on documents tab in BP in SAP CRM

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

Batch Print multiple files in one click

I created an Automator app that allows the user to:
1) Ask for multiple Finder Items
2) Print Finder items
Problem is that when it runs I have to click the OK button in the print dialogue once for each individual file. If I run this workflow for 80 files to be printed I have to hit the OK button 80 times! I just want to automate this action too, but cannot find a way to do this.
Is there a way to click just once and have all files printed the same way?
TIA

Thanks for helping.
They are all .ods files created by OpenOffice macros from our intranet based MySQL database that are saved to our Tiger Server fileserver. We run a report from the intranet php interface which opens a OpenOffice Spreadsheet macro file, this then populates the template file with each data record one at a time that have been called directly from the SQL query, and then saves the files in a folder it creates for the purpose. It's a bit long winded, but it works. Neither Excel nor Numbers offers this ability.
After the files have been saved they need to be printed. The Automator app I created does nearly all I want, but is not 100% automated as each separate file needs an individual 'OK' button press, which is annoying.

Uploading Multiple files in One-Click!!!

Hi All,
I have got nearly about 900 PDF files in my file server which need to be uploaded to the KM CONTENT Repository.
what is the best methodology to upload all these file in to the repository in <u><b>one click.</b></u>
Is it possible to achieve this??
Eagerly waiting for replies.
Regards,
Kavitha

Hi Patric,
It is quite interesting to see that there is a way to upload multiple files in a click.
I just followed your way. i copied the WebDAV URL and pasted and executed in a new browser. and i get....
<i>The folder you are looking for has no displayable content.
You can try one of the following:
Access the folder using the Navigation user interface.
Access the folder as a Web folder. Your operating system and browser dictate whether or not this will work.</i> "
When i choose "Web Folder", i get a pop up and it says "<i>The web folder address Internet Explorer was given was too long. Please use a shorter address</i>."
When i choose "Navigation User Interface", iam taken to the default KM Folder.
I nowhere able to see the folder structure like what you have mentioned in your reply.
Kindly help me out.
Regards,
Kavitha

Multiple tasks with one click

My work involves manually changing multiple lines to a different graphic style, and then moving that line to a different layer. As it is now, I am changing the graphic styles, choosing Select < Same < Fill & Stroke, and then moving the lines to the appropriate layer. I am wanting to know if there is a way to change the graphic style, and move the line to the different layer with one click. I'm ignorant when it comes to scripting, but was wondering if there are any scripts that would perform this function.

You need to fully explain the setup. Otherwise, people making suggestions are just guessing. Here's my suggestion, based on what little information you have provided:
You don't need a script for this; you can do it with a set of very simple Actions. Example:
Assume your repetitive task requires three Layers, named Red, Green, and Blue. On each Layer, all objects need to have the same Graphic Style applied.
1. New document. Create three Layers. Name them Red, Green, and Blue.
2. Define three Graphic Styles. Name them Red, Green, and Blue.
3. Draw an object (any object; a square, a line, whatever). Send it to Layer Red. In the Attributes Palette, type "Red" into its Note field. (This effectively "names" the object "Red".
4. Draw an object, Send it to Layer Green. Type "Green" in its Note.
5. Draw an object. Send it to Layer Blue. Type "Blue" in its Note.
6. Draw an object on Layer Red. Select it.
7. Actions Palette: New Action. Name the Action "Red." Set its color to red. Start recording:
7.1 Edit>Cut
7.2 Edit>PasteInFront
7.3 Apply Graphic Style Red
7.4 Stop recording.
8 Actions Palette: Select the Cut step. From the flyout menu select Select Object.... In the resulting dialog, enter "Red". OK the dialog. The Action should now have a new Set Selection step listed after the Cut step.
9. Actions Palette flyout menu: Button Mode.
Now you have an Action named Red that appears as a red button in the Actions palette. Select an object. Click the button. The object is moved to Layer Red, and gets Graphic Style Red.
10. Turn off Button Mode. Duplicate the Action. DoubleClick the duplicate. Change its name to Green and its color to green. Edit its Set Selection step to select the object named Green. Replace its Graphic Style step with a step that applies Graphic Style Green.
11. Similarly duplicate and edit one of the two Actions to create a Blue Action. Put the Actions palette back in Button Mode.
Now you can select any number of objects, and then move them to the Red, Green, or Blue Layer and apply the appropriate Graphic Style wiht one click.
Now come back and reveal the specifics of your actual situation which renders all that work moot.
JET

Multiple form inside one jsp file

I have to use nested jsp forms in my latest project
ex:-
<html>
<head>
</head>
<body>
<form id="form1" name="form1" method="post" action="ex.htm">
<form id="form2" name="form2" method="post" action="ex2.htm">
</form>
<form id="form3" name="form3" method="post" action="ex3.htm">
</form>
</form>
</body>
</html>
Can some one tell me, is there a way to submit the each forms seperatly?
-----------------------------------------------------------------More on problem-----------------------------------------------------------------
I am developing e-savings application.
When the customer enter the accountno i need to display details - for this i use "form1"
When the customer enter the withdrawal amount i need to display the balance - for this i use "form2"
Finally i use "form3" to submit the data.
I have done all the things inside one jsp page.
I think you are now clear in my problem and hope best solution....
Thank you........

According to the HTML specification, you may not nest forms.
You can use multiple forms as long as you don´t nest them.

Multiple Forms on One page

Hi,
I am trying to create multiple forms based on different tables on ONE page. But some how I get errors in the Automatic process (fetch,insert, and update) which gets created when you create a form.
The tables i am using have some common colomn_name but i when creating form i am not including those columns.
For eg. all my table have create_by,update_by column but i am not add these columns in the form as they are updated by the DB trigger.
Vikas

Vikas,
create one form using wizard and the others manually.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

How to use Keychain for multiple users on one computer?

I have a new Macbook Pro with Yosemite. I just moved over from PC for my work computer and the Keychain thing is killing me! I am a social media consultant so I manage multiple accounts for multiple clients. I need a way to log in and out as them on many different platforms. The reality is that I am the only user but I log in and out of different things as if this was a public computer with multiple users.
PC allowed me a drop-down option with each login. For example the email box could be clicked and then I could select the client email that I needed to fill in. The password would then auto-populate. Is there any setting I can change to make this happen on a Macbook? I have been logging in, deleting the info in Keychain, then logging in for the next client, delete...etc.
Most password managers don't work because of this same problem. Please don't recommend a password manager app unless it can handle logging in and out of (for example)10 different LinkedIn profiles.
Any advice would be greatly appreciated!

Tanja Turtsanyi wrote:
I have a new Macbook Pro with Yosemite.
Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.
Mac OS X (10.4)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

How to execute KISR for multiple cycles in one step?

CO Experts,
I have a business reqirement to reverse the previous month assessments into the next period. I am planning to use KISR, but I could not find any way to execute KISR for multiple cycles, similar to the RKGALKSU5
program ? Is there any program available to makes possible the above ?
Thanks and Regards
Peter

Hi Samir,
Please feel free to take a look at Liaison Messenger EDD, www.liaisonsc.com
Messenger EDD automates business form and report distribution and uses your existing SAP reports. The end user selects either a batch or a single document through your normal print process in SAP but now uses our Messenger EDD print driver and Messenger will then distribute the documents selected based on rules you set up at initial configuration.
For example, through the single print selection:
- Distribute Invoices to the customers preference (print, fax, or email) if email, it attaches a PDF of the document
- Archive a copy to desired folder
- Print a hard copy to attach to other paperwork
- Attach a static or variable attachment like terms and conditions, marketing PDF, or supporting variable documents.
* PDF creation is included with the product.
Set up similar rules for Sales Orders, PO's, Statements or even shipping documents like Packing Slips, Picking Tickets, Bills of Lading and
International docs, etc.
Please reach me at [email protected] or 714.543.9877x201 if you have any questions or would like to view an on-line demonstration.
Best Regards,
Tom Nielsen
Liaison Software

Printouts for multiple forms in one click

Similar Messages

Maybe you are looking for