Prob in IR :Internal error during bean lookup for bean RepObjectAccessBean

Hi,
I am facing the problem in IR .
<b>Internal error during bean lookup for bean RepObjectAccessBean</b>
is the Error window I am getting frequently, After getting this error, It is no allowing to open any of the IR Objects.
Thanks in advance,
Dhanabal T

Hi Dhanabal,
i got the same error. But it is clear.
Please chek once ur configuration part. The error is in configuration part only.
once check all the steps in ur configuration part.
REgards,
chandra.

Similar Messages

VLD-1141: Internal error during mapping generation.

I am getting the "VLD-1141: Internal error during mapping generation" error when deploying a mapping. This mapping was previously working fine. As part of a re-factoring effort, for all the underlying tables and views, we replace 2 existing columns with a new column. All the objects were successfully re-imported and synchronized in the mapping. The mapping is using Mapping Input Parameter, Lookups, Expression Transformations, Splitter, Set Operator, Source & Target Tables. All these transformation were part of the earlier working version of the mapping.
On doing validation within the mapping, I get a success message followed by 4 warning for the Lookup Condition on key Lookup does not contain a complete unique key. Before the re-factoring effort, I was getting the same 4 warning messages, however the mapping was executing correctly.
When I do Generate within the mapping, I get the following message:
Code cannot be generated.
Click the message tab for details.
In the Design Center, when I do a validation on the mapping I get the following error:
VLD-1141: Internal error during mapping generation.
java.lang.NullPointerException
at oracle.wh.service.impl.mapping.component.Sequence.getSequenceExpressions(Sequence.java:138)
at oracle.wh.service.impl.mapping.component.Sequence.doSequenceValidation(Sequence.java:239)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:123)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:97)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext(EntitySqlDelegate.java:78)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:240)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBasedInternal(PlSqlGenerationMediator.java:2108)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBased(PlSqlGenerationMediator.java:2090)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assemble(PlSqlGenerationMediator.java:541)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:798)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:335)
at oracle.wh.service.impl.mapping.generation.WBDeployableMappingGenerator.generate(WBDeployableMappingGenerator.java:102)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:433)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:251)
Any help in this regards would be appreciated.
Naval

Hi,
I think your mapping is corrupted by converting two columns to one. The owb has always a problem if you change the structure of a table which is bound to a table operator. The way to avoid this is to drop the table operator after changing the table in the table editor and recreate it with the changed table definition.
Make a test: select the new attribut in the table operator and look left on the configuration window. To which table and attribute it's bound?
Regards,
Detlef

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Internal error during pvc call: No space left on device (errno:28)

Hi
When we am exproting the objects ( using File System) we are getting the following error
Internal error during pvc call: No space left on device (errno:28) For more information, see the server log.
Please help us how to resolve this problem
Thanks & Regards
Sowmya

Hi
Check with the export directory file system. Looks like space issue for the .tpz you are trying to export.
Thanks
Gaurav

Error during JNDI lookup Accessing Remote EJB (access to web service restricted using declarative security model)

Hello everyone,
I developed a Web Service prototype accessing remote EJB using the EJB
control with special syntax in the jndi-name attribute: @jws:ejb
home-jndi-name="t3://10.10.245.70:7131/AccountDelegatorEJB"
Everything works fine, but I get an error when I restrict access to my web
service with a declarative security model by implementing steps provided in
help doc:
- Define the web resource you wish to protect
- Define which security role is required to access the web resource
- Define which users are granted the required security role
- Configure WebLogic Server security for my web service(Compatibility
Security/Users)
I launch the service by entering the address in a web browser. When prompted
to accept the digital certificate, click Yes, when prompted for network
authentication information, enter username and password, navigate to the
Test Form tab of Test View, invoke the method by clicking the button and I
get the following exception:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed for
name:t3://10.10.245.70:7131/AccountDelegatorEJB]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed
for name:t3://10.10.245.70:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64) </jwErrorDetail>
</detail>
</error>
I have a simple Hello method as well in my WebService (which is also
restricted) and it works fine, but remote EJB access doesn't. I tested my
prototype on Weblogic 7.2 and 8.1 platforms - same result.
Is that a bug or I am missing some additional configuration in order to get
that working. Has anyone seen similar behavior? Is there a known resolution?
Or a suggested way to work around the problem?
Thank you.
Andre

Andre,
It would be best if this issue is handled as an Eval Support case. Please
BEA Customer Support at http://support.beasys.com along with the required
files, and request that an Eval support case be created for this issue.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Andre Shergin" <[email protected]> wrote in message
news:[email protected]...
Anurag,
I removed "t3", still get an error but a different one (Unable to create
InitialContext:null):
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB[Unable to
create InitialContext:null]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB[Unable to
create InitialContext:null] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetVisaHistoryTransactions.getVisaHistoryTxn(GetVisaHistoryTransactions
.jws:67) </jwErrorDetail>
</detail>
</error>
Note: inter-domain communication is configured properly. The Web Service to
remote EJB works fine without a declarative security.
Any other ideas?
Thank you for your help.
Andre
"Anurag" <[email protected]> wrote in message
news:[email protected]...
Andre,
It seems you are using the URL
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB
whereas you should not be specifying the "t3:" protocol.
The URL should be like
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB
Please do let me know if you see any issues with this.
Note that this will only allow you to access remote EJBs in the same WLS
domain. For accessing EJBs on another domain, you need to configure
inter-domain communication by
following a few simple steps as mentioned at
http://e-docs.bea.com/wls/docs81/ConsoleHelp/jta.html#1106135. This link has
been provided in the EJB Control Workshop documentation.
Regards,
Anurag
"Andre Shergin" <[email protected]> wrote in message
news:[email protected]...
Raj,
I tried that before, it didn't help. I got similar error message:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB[Lookup
failed for
name:t3://secuser1:[email protected]:7131/AccountDelegatorEJB]</faultstr
ing>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB[Lookup
failed for
name:t3://secuser1:[email protected]:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64) </jwErrorDetail>
</detail>
</error>
Anything else should I try?
P.S. AccountDelegatorEJB, the remote EJB my Web Service calls is NOTaccess
restricted.
I hope there is a solution.
Thanks,
Andre
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]...
Andre,
Can you try using the following url with username and password
jndi://username:password@host:7001/my.resource.jndi.object ?
once you add webapp level security, the authenticated is the user who
invokes the EJB.
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/controls/ejb/con
CreatingANewEJBControl.html?skipReload=true
has more info on using remote EJB's.
Hope this helps.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Alla Resnik" <[email protected]> wrote in message
news:[email protected]...
Hello everyone,
I developed a Web Service prototype accessing remote EJB using the EJB
control with special syntax in the jndi-name attribute: @jws:ejb
home-jndi-name="t3://10.10.245.70:7131/AccountDelegatorEJB"
Everything works fine, but I get an error when I restrict access to my
web
service with a declarative security model by implementing steps
provided
in
help doc:
- Define the web resource you wish to protect
- Define which security role is required to access the web resource
- Define which users are granted the required security role
- Configure WebLogic Server security for my web service(Compatibility
Security/Users)
I launch the service by entering the address in a web browser. Whenprompted
to accept the digital certificate, click Yes, when prompted for
network
authentication information, enter username and password, navigate tothe
Test Form tab of Test View, invoke the method by clicking the buttonand
I
get the following exception:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed for
name:t3://10.10.245.70:7131/AccountDelegatorEJB]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during
JNDI
lookup from jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookupfailed
for name:t3://10.10.245.70:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260)at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64)</jwErrorDetail>
</detail>
</error>
I have a simple Hello method as well in my WebService (which is also
restricted) and it works fine, but remote EJB access doesn't. I testedmy
prototype on Weblogic 7.2 and 8.1 platforms - same result.
Is that a bug or I am missing some additional configuration in order
to
get
that working. Has anyone seen similar behavior? Is there a knownresolution?
Or a suggested way to work around the problem?
Thank you.
Andre

Internal error during pricing in CRM service order

Hello Guys,
   Here is an issue when i add line item in service order, it pops up with an error message " Internal error during pricing "at header & line item. Its observed that output tax condition type MWST is not called from TTE. Pricing procedure has picked up perfectly & even TTE setting is maintained which in turn calls Tax Calculation procedure 11000. But then we are unable to trace where system is falling to call MWST condition type. Request you to guide me on the issue.
Regards
Devika.S

Hi Devika,
please refer to following SAP notes:
559836          FAQ: tips & tricks for CRM pricing
559876          FAQ: Tricks and hints for the error analysis in pricing
559866          FAQ: tips & tricks for the IPC installation
best regards,
Johannes

Internal error during pricing in CRM sales order

Hi,
While creating sales order i am getting following error in sales order
Internal error during pricing.
i am not understading what will be the cause of error
currently working on CRM 7.0
we have replicated all pricing condition types from ECC
Thanks & Regards
kishore kumar

Hello kishore kumar,
Tell basis Team to restart Java Instances.
After that check in Sales Order. If you still get that error then download below objects in a Sequence.
1. DNL_CUST_CNDALL
2. DNL_CUST_CND
3.DNL_CUST_PRC
Regards,
Rajendra

Error during material determination for sales document item - RRB

Hi
Iam getting following error when trying to create a billing request using DP91.
Error during material determination for sales document item 40001560/000010
Message no. AD01155
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
I have checked my DIP profile using ODP02 there are no errors in it, I have created a Setid and assigned it to costing element in selection criteria and material determination criteria.
Material origin is checked in costing tab in material master.
Appreciate help in resolving this.
thanks,
Vaishnavi

Hi Vaishnavi
The error which you are getting is related to costing.So kindly reach your FI Consultant
please check the following links which may help you.Also check the link that has been provided my Lakshmipathi
ERROR AT DP90 TRANSACTION
Regards
Srinath

Java.lang.IllegalStateException: INTERNAL ERROR: Global root folder for pre-installed component archives not defined.

Hi Gurus,
I am working on NWDS 7.01.00 after opening NWDS, I am getting this error. My error log file is:
java.lang.IllegalStateException: INTERNAL ERROR: Global root folder for pre-installed component archives not defined.
at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getRootPathForCompartment(DevConfFileSystemLayout.java:202)
at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getAbsoluteSCRoot(DevConfFileSystemLayout.java:76)
at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getAbsoluteTopLevelDCsRoot(DevConfFileSystemLayout.java:169)
at com.sap.tc.devconf.impl.LocalSCNode.initializeTopLevelDCNodeList(LocalSCNode.java:41)
at com.sap.tc.devconf.impl.LocalSCNode.<init>(LocalSCNode.java:24)
at com.sap.tc.devconf.impl._Factory.createLocalSCNode(_Factory.java:385)
at com.sap.tc.devconf.impl.DevelopmentConfiguration.getTopLevelDCsForLocalCompartment(DevelopmentConfiguration.java:3415)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB._initializeLocalEntries(ComponentSyncDB.java:788)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.initializeLocalEntries(ComponentSyncDB.java:759)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.initialize(ComponentSyncDB.java:436)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.retainEntriesFromCompartment(ComponentSyncDB.java:824)
at com.sap.tc.devconf.impl.LocalDCScanner.refreshSyncDBForLocalDCs(LocalDCScanner.java:103)
at com.sap.tc.devconf.impl.DevelopmentConfiguration.<init>(DevelopmentConfiguration.java:378)
at com.sap.tc.devconf.impl._Factory.createDevelopmentConfiguration(_Factory.java:354)
at com.sap.tc.devconf.Factory.createDevelopmentConfiguration(Factory.java:103)
at com.sap.tc.devconf.DevelopmentConfigurationFactory._addConfiguration(DevelopmentConfigurationFactory.java:2062)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:761)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:696)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:667)
at com.sap.ide.eclipse.component.devconf.DevConfManager.createDefaultDevConf(DevConfManager.java:341)
at com.sap.ide.eclipse.component.devconf.DevConfManager.getInstalledDevConfs(DevConfManager.java:442)
at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:135)
at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:109)
at com.sap.ide.eclipse.component.provider.ComponentProviderPlugin$1.run(ComponentProviderPlugin.java:82)
at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:98)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)

Maybe some plugins are missing. Try reinstall the latest version of the nwds that matches to you server version.
http://wiki.scn.sap.com/wiki/display/Java/NWDS+Download+Links

In DP50 Error during material determination for service order

Hi,
While doing Resources-Related Billing request,the following error is displaying..
Kindly Help
Error during material determination for service order
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
501384
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
Thanks,
Mohit

Hi mohit,
You need to check DIP profile setting if profile is attached to your order type or not please check this
Thanks and regards
Sachin Kadam

Error during availability check for order

Hi PM experts,
How can I make below warning message (W) to an error message (E)?
Message no: CO820 (Error during availability check for order)
Regards,
Nizam
PM Consultant

Hi,
you can cantrol not to release maint orders in case if parts are missing by OIOI transaction, here under Material Availability against Release material you maintain option 3 No release if parts are missing. This way you can achieve this. If there are other components which has stock on Maint order then delete the un-available material from maint order then it will allow you to release the order.
Hope availability check rule is maintained on material master.
Hope it helps.
Regards,
N.Nagaraju

OWB 11.2 internal error during mapping generation

Dear all,
Ever since switching to OWB 11.2 I have been sporadically receiving unexplicable errors during mapping deployment. It only happens when I generate more than 1 mapping simultaneously, and it appears to be completely random. One or more mappings will fail during the generation phase of the deployment with an 'internal error', after which I get the option to continue deployment of those mappings that did generate correctly. What I usually do next is trying to deploy the failed mappings again, which always works - the internal error does not reoccur. But it seems to be that this second generation does not work properly either.
For example, today I had to redeploy my entire set of mappings, due to a server change. Of the 60 mappings I had, about 5 failed with the forementioned error. (Sadly I can't include the exact error here since the job logs in the control center do not record this failure to generate, it looks like the failed mappings never were included in the job in the first place.) One of them I deployed aftewards, and found the query in the pacakge to look like:
    INSERT
    /*+ APPEND */
    INTO
      "SA_BETMD_01" "SA_BETMD_01"
      ("DEWNKNR",
      "DEBTMCE",
      "DEBTMOM",
      "DEBTMO2",
      "DEBTMO3")
      (SELECT
/*+ NO_MERGE */
/* DRBETMD_RS.INOUTGRP1 */
"DRBETMD_RS"."DEWNKNR" "DEWNKNR",
"DRBETMD_RS"."DEBTMCE" "DEBTMCE",
"DRBETMD_RS"."DEBTMOM" "DEBTMOM",
NVL("DRBETMD_RS"."DEBTMO2", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO2.OGRP.DEBTMO2: EXPRESSION */ "DEBTMO2",
NVL("DRBETMD_RS"."DEBTMO3", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO3.OGRP.DEBTMO3: EXPRESSION */ "DEBTMO3"
FROM
"SRC"."DRBETMD_RS"@"SRCDBP@SAFE_SRC_PRD_RET" "DRBETMD_RS"
    ;However, generating the preview code in OWB results in a more correct and complete version of the code:
    INSERT
    /*+ APPEND */
    INTO
      "SA_BETMD_01" "SA_BETMD_01"
      ("DEWNKNR",
      "DEBTMCE",
      "DEBTMOM",
      "DEBTMO2",
      "DEBTMO3",
      "DEBTMO4")
      (SELECT
/*+ NO_MERGE */
/* DRBETMD_RS.INOUTGRP1 */
"DRBETMD_RS"."DEWNKNR" "DEWNKNR",
"DRBETMD_RS"."DEBTMCE" "DEBTMCE",
"DRBETMD_RS"."DEBTMOM" "DEBTMOM",
NVL("DRBETMD_RS"."DEBTMO2", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO2.OGRP.DEBTMO2: EXPRESSION */ "DEBTMO2",
NVL("DRBETMD_RS"."DEBTMO3", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO3.OGRP.DEBTMO3: EXPRESSION */ "DEBTMO3",
NVL("DRBETMD_RS"."DEBTMO4", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO4.OGRP.DEBTMO4: EXPRESSION */ "DEBTMO4"
FROM
"SRC"."DRBETMD_RS"@"SRCDBP@SAFE_DGN_PRD_RET" "DRBETMD_RS"
    ;The same goes for other packages, all of which crash due trying to insert NULL values in a mandatory column! (In case, DEBTMO4.)
Funny enough, if I generate the mapping again a bit later - without making any changes to the mapping - the code is complete and everything works properly.
Does anyone else ever had this problem? My main problem is that I can't just reproduce this problem, so I can't exactly report it as a bug and expect it to be solved...
Kind regards,
Kurt Geens

Good morning Dave,
I do mean during deployment. As you probably know all too well, the deployment of a package is split in two parts: generation of the code, and the actual deployment. The internal error occurs during that first part - the generation of code. The exact steps I went through when the error occured are the following:
1) I selected about 15 mappings, and chose to 'replace' these mappings in the database. The code was generated, with 4 mappings having the forementioned 'internal error'. After pressing the play button the deployment of the 11 remaining packages continued without problem.
2) Within the same session, I selected the 4 failed mappings, and chose to 'replace' these again. The generation and deployment was succesful - no internal errors occured.
3) I exited OWB and started a daily workflow process. One of the mappings that had an internal error in step 1 crashed with a 'cannot insert null into' error.
4) I restarted OWB, opened the mapping, chose to generate the code, and compared the generation result with the package code in the database. This resulted in the difference mentioned in my original mail.
5) I deployed (replace) the mapping once more, and verified the code in the database. This time the code was complete (no missing column).
Regards,
Kurt

6.0.3 Error During Disc Initialization for both DVD+R and Disc Image - Help

I've been a mac user for a few years now, but I just bought a new MacBook, and my first superdrive! I'm all excited to test out the new hardware along with iDVD.
I've made a rather simple DVD setup and the first time through it was encoding for about an hour and then it gave an error message which I don't recall other than it mentioned QT7. I ran updater, no new updates that I needed and I tried again, and from then on I've been getting the Error During Disc Initialization message when burning to my DVD+Rs or when I try and save as a disc image (yes, I've deleted the encoding assets). I have about 20GB free on HDD, and I'm trying to burn approx. 100min of video. I've rebooted multiple times, and I've remade my project a couple times but no dice.
Any idears?
Mac OS X (10.4.8)

What hardware do you have???
You didn't answer Sue's question about free space on
your start-up drive. You should have 20GB+ free.
What are you sending to iDVD?
Verbatim DVD-R, not DVD+R, are very reliable, unlike
TDK and Memorex.
Also look here:
http://docs.info.apple.com/article.html?artnum=302925
I am running on a 2.0 ghz MacBook with a SuperDrive using Sony DVD+R. I will definitely pick up some Verbatim DVD-Rs though to see if that makes iDVD happy.
I have cleared up some room and now I have around 50GB free.
I am trying to make a DVD of two seperate .mp4s of a soccer game. I have 3 pictures and two buttons.

Error during TREX indexing for WPC content

Hello,
I have setup TREX to search Web Page Composer content. I am getting folowing error below during the indexing for WPC content. Any help would be great.
thanks
Jaish
[3508] 2008-08-11 15:19:19.842     e     preprocessor     Preprocessor.cpp(03957) :     HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 8002)
[3508] 2008-08-11 16:39:06.196     e     preprocessor     Preprocessor.cpp(01167) :     HTTPHEAD failed for URL http://sjcsapqapt.datadomain.com:50300/irj/servlet/prt/portal/prtroot/docs/guid/80fa1c8c-1b4a-2b10-38ab-b20f54134ca1?prtmode=trex with Httpstatus 500
[3508] 2008-08-11 16:39:06.212     e     preprocessor     Preprocessor.cpp(03957) :     HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6500)

there was problem with Index creation the way I was creating it.

Error during installing nw2004s for pi

hi,
i got the following error during create oracle database step in installing nw2004s
i am tring to install PI70(02) on same machine which i already installed solution manager(00,01)
i already patched oracle database as 10.2.0.2 and i am using loopback adapter
ERROR 2006-11-06 08:56:25
CJS-00084 SQL statement or script failed. DIAGNOSIS:
Error message: ORA-32004: obsolete and/or deprecated parameter(s)
specifiedORACLE
AI½ºAI½º°¡ ½AAUμC¾u½A´I´U.
ERROR 2006-11-06 08:56:25
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException:
error text undefined.
ERROR 2006-11-06 08:56:25
FCO-00011 The step createDatabase with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Doublestack_OneHost
ind
ind
ind
ind
3
0
NW_CreateDB
ind
ind
ind
ind
10
0
NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain
ind
ind
ind
ind
0
0
NW_OraDBStd
ind
ind
ind
ind
3
0
NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status
ERROR .
regards;
Dennis

Hi Dennis,
Check the alert_<SID>.log in your installation. Check if the error is shown there. The log file will show the obsolete parameter. In my case it was 'enqueue_processes'. Comment this parameter and save the init<SID>.ora file and click 'Retry' button.
The create Database phase should continue.
Award points if the solution is suitable.
Thanks & Regards,
Abhijit Deshpande

Prob in IR :Internal error during bean lookup for bean RepObjectAccessBean

Similar Messages

Maybe you are looking for