Prob in Trigerring Correct Sap-Script

Hi,
I have copied a Z_Sap script from a standard available Sap script. The form settings are done in the QC02 transaction and The form is triggerred for Pint priview from QC22 transaction. Now in the recipient field if we give language an 'EN'- its trigerring mine Z_Sap script.. and its printing all correctly..
Now the issue is if we change the recipient language from 'EN' to 'FR' or 'DE' or any other language its printing the Standard Sap Script form in the language given. I have checked in the print program that in the OPEN_FORM FM the form name is mine Z_Sap script and spras is also 'F'.
If its showing mine Z_Sap script in OPEN_FORM FM, then it shud also print the same one.. any clues on why is this happening?
Thanks in Adv

Hi,
iam not sure whether iam correct or not, but i can say if you include the text as Standard text(Tcode: so10) , and then include the standard text in script editor,
and moreover you need to transalate the language (Tcode SE63), then only you can view the script in the desired language.
Languag etranslation is important to view the text in desired language.
Revert Back if any issues,
Reward with points if helpful.
Regards
Naveen

Similar Messages

Program with sap scripts doent show any values

While executing the program with scripts the output doesnt show values from the database. It simply shows the print preview with '&&' values. Pls help me
Edited by: Gayathri Nair on Mar 12, 2009 8:11 AM

Hi,
Check your driver program
1.you should have used OPEN_FORM with correct sap script form name
2.have read the data into internal table and with in the loop-end loop you are calling WRITE_FORM
with the element and the window type shpuld be MAIN to display the data.
(use the same eleemnt in the MAIN WINDOW defined on the form) then only output will be printed.
3.Have used the close form outside the loop-endloop.
Please revert back in case of problem.
PS:main reason can be the use of elements and the window type as I have also faced the same kind of problem.
Pooja

If i got incorrect characters in the output of sap script? HOW TO CORRECT I

If i got incorrect characters in the output of sap script? HOW TO CORRECT IT?

Hi Sunil,
Debug the script and check where exactly those are getting populated. Definately you will get it. Check the conversion parts means character to numeric conversion.
If your version is 4.7E then select unicode check box in the reports attributes. It will display the error message so that we can solve very easily.Hope this helps you, reply for queries, Shall post you the updates.
Regards.
Kumar. .

Calculation of values in a dunning form (SAP Script)

Hi Experts!
I want to add values to a sum (dunning-amount + dunning-fee + interest) in a dunning form (SAP Script; Z150_DUNN_02).Therefore I'm using a subroutine (Z_FI_KX_DUNN_02_INTEREST) to summarize. Problem is the format of the output-field &Z_FAEBT&. It's not similar to field &MHNK-FAEBT& which was formerly printed (without calculation of interest and dunning-fees.
/:   DEFINE &Z_FAEHW& := &MHNK-FAEHW&
/:   DEFINE &Z_ZINHW& := &MHNK-ZINHW&
/:   DEFINE &Z_MHNGH& := &MHNK-MHNGH&
/:   DEFINE &Z_FAEBT& := &MHNK-FAEBT&
/:   PERFORM ZFAEBT IN PROGRAM Z_FI_KX_DUNN_02_INTEREST
/:   USING &Z_FAEHW&
/:   USING &Z_ZINHW&
/:   USING &Z_MHNGH&
/:   CHANGING &Z_FAEBT&
/:   ENDPERFORM
/:   ENDIF
A3   &MHNK-WAERS& &Z_FAEBT(C)&
It would be fine to get a hint how to format the field &Z_FAEBT& correctly. Must be done in the subroutine Z_FI_KX_DUNN_02_INTEREST by a special WRITE-command? Is it possible to add these values only in the form?
Thanks for support!
Regards, Bernd

hi!
I defined the field like you said! After moving this field to a numeric field to add the different amounts the
following error occurred:
Runtime errors         CONVT_NO_NUMBER
Exception              CX_SY_CONVERSION_NO_NUMBER
Occurred on     16.06.2009 at   15:15:25
Unable to interpret " 1.316,59" as a number.
Definition:
FORM zfaebt TABLES in_par STRUCTURE itcsy
                   out_par STRUCTURE itcsy.
TABLES: mhnk.
DATA: z_faehw_num LIKE mhnk-faehw,
        z_zinhw_num LIKE mhnk-zinhw,
        z_mhngh_num LIKE mhnk-mhngh,
        z_faebt_num LIKE mhnk-faebt.
DATA: z_faehw TYPE string,
        z_zinhw TYPE string,
        z_mhngh TYPE string,
        z_faebt TYPE string.
statement:
READ TABLE in_par WITH KEY 'Z_FAEHW'.
CHECK sy-subrc = 0.
z_faehw = in_par-value.
z_faehw_num = z_faehw.
I suppose a type-conflict.
Regard, Bernd

How to create new page in SAP Script?

Moved to correct forum by moderator. Duplicate deleted. Do NOT post the same question in two forums.
Hello friends,
I am modifying one SAP script.
It is already contains 2 pages. FIRST and NEXT.
All I have to do is to create one more page which should be display as last page.
And this last page should display some data.
I tried and created a new page in SE71 but when i execute the program, it doesn't show newly created (LAST) page.
Please guide me.
REgards,
RH
Edited by: Matt on Nov 7, 2008 4:26 PM

Hi
U need to force the call of this new page.
I suppose your sapscript is arrange with 2 page: FIRST and NEXT, where FIRST has NEXT as next page.
So the system automatically print the pages FIRST and NEXT: u need to insert the statament:
/: NEW-PAGE LAST
in the MAIN window.
U can create a text element NEW_PAGE and you'll call it as soon as you've finished to print the main data:
/E NEW_PAGE
/: NEW-PAGE LAST
U can use the fm CONTROL_FORM
Max

How to handel cancel button in Sap Script ?

Hi friends,
I want to print SAP Script, in print popup screen have u201C print previewu201D u201CPrintu201D u201CCancelu201D button.
Whenever press Cancel button getting popup message u201COutput was cancelled by the useru201D ,
if press u201CExitu201D button it is going to SAP Easy Access.
I want if press cancel button it should back on the program.
Or should not display popup message u201COutput was cancelled by the useru201D.
Plz. Guide me .
Thanking you.
Regards,
Subash.

Hi Shiba Prasad Dutta,
Thank you for your correct answer.
Warm regards,
Subash.

How to change a Code Page in SAP SCRIPT ?

I have a specific requirement, would need your help :
There is a CODE PAGE which is getting assigned to the SAP SCRIPT FORM. For E.g : 1100 is generally used for SAP SCRIPTS.
I would like to know if there is a possibility to change the Code Page based on certain conditions ??
Also i would like to know how and where is a CODE PAGE and SAP SCRIPT FORM linked.
I have analysed that a default code page can be set in the SAP LOG ON PAD but not able to find the issues mentioned above.
Kindly help me out with your valuable suggestions and solutions.
Thankyou
Brijesh.

Hi,
MDMP means Multi Display Multi Processing. See the note system for details. The problem of MDMP is that the different languages use different codepages and not all characteres can be displayed in every codepage.
A solution would be a unicode conversion of the system. In unicode there is only one internal codepage, which contains all special characters of the individual languages. However the migration needs several hours of down time and unicode systems need more memory and disk space. I can't tell you a percentage for that. You need at least R/3 4.7 for unicode.
In non-unicode system I believe you can't change the codepage inside a SAPscript document directly. I would have to end form processing an start a new form. To change the language you can try the ABAP-command SET LOCALE. Also see the language parameter in START_FORM.
If that doesn't work I would try using RFC-Connections. Make RFC-Connections in your system which contain the system it self as target system, but with the desired language filled in. You do not need to provide a user or password, that would be taken form the logged on user.
Inside your printing program you put the real printing into a function module. Your report then can call the function via RFC using a connection in the correct logon language.
Greetings

How To trigger last page in sap script of customer account statement

Hello all,
I am working on customer account statement.
It has it's own standard script(F140_CUS_STAT_02). But my client's requirement was completly diffrent,so i copied that to z script and made some changes like delete some window and some another window.
Now on first page , i have following windows,
1) Header
2) address
3) main
4) Account
5) Footer.
Next Page having following windows,
1) Header
2) Main
3) account
4) footer
Now i want to print account window on lsat page, so i put the condition nextpage = 0.
and it is working fine , but as account window is physically present after Main window , so that much blak sapge is getting creted after main window on every page.
To remove that blank space i am thinking of creting one more page and everytime i want display account window on that page.
I have creted the last page also. but in my output it not detecting that last page.
For First page - next page is next.
For Next page - next page is next.
for Last page- next page is last.
Also i have added following code at last in main window.
/: NEXT-PAGE LAST.
But i think i am placing this code at incorrect position in main window.
I am not able to find out the correct podition to put the above code,but main window of that script conataing so namy text element, and that text element are getting handled from driver program based on some conditions.
I have added my code in main window but not changed the original code.
Plz let me know where to write /: NEXT-PAGE LAST. in main window.
Or provide me some another solution to trigger thet last page in sap script.
Regards,
Anuja Dhondge

Hi ,
actually in account window i have used tha box command to print account statement.
Previously i was printing this account statement in main window itself but without using bottom and end bottom command.
So , as i made some changes or add some code in main window then lines of this account statement were getting dismental.
So my question is using bottom and end-bottom command this will happen or not????

Need to print some text only in last page in SAP script

Moved to correct forum by Moderator. General wasn't right either.
Hi All.
I need to print "Remarks" only in last page of sap script.
Can anyone please help me on this.
Thanks
Senthil kumar V.
Edited by: Matt on Nov 21, 2008 7:38 AM

Hi,
you have 4 possibilities.2 at non main window, 2 at main window.
at non main window.
1. /: IF &PAGE(C)& = &SAPSCRIPT-FORMPAGES(C)&
remarks
remarks
remarks
   /: ENDIF
2, /: if &NEXTPAGE& ='0'.
remarks
remarks
remarks
   /: ENDIF
at main window
3. Add the remarks at the last item of the main which is printed
4. add a new item to your main (/E)
    put your remarks in it.
   Change your program in such a way this item will print as last one.
   like
    /E REMARKS
remarks
remarks
remarks
   and in sapscript program add logic at the end.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REMARKS'
EXCEPTIONS
element = 1
window = 2.
I am sure this will do. Make a choice.
Gr., Frank

Dump error when clicked on text elements in SAP Script window

Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category ABAP Programming Error
Runtime Errors DATA_LENGTH_TOO_LARGE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program SAPLSTXK
Application Component BC-SRV-SCR
Date and Time 30.04.2014 20:00:08
Short text
 Invalid partial field access: Length is too large
What happened?
 Error in the ABAP Application Program
 The current ABAP program "SAPLSTXK" had to be terminated because it has
 come across a statement that unfortunately cannot be executed.
What can you do?
 Note down which actions and inputs caused the error.
 To process the problem further, contact you SAP system
 administrator.
 Using Transaction ST22 for ABAP Dump Analysis, you can look
 at and manage termination messages, and you can also
 keep them for a long time.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
 caught in
 procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the executed program "SAPLSTXK", the system attempted to access the field
 "ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
 However, a partial field access with a length specification that is
 larger than the field length is not allowed.
How to correct the error
 Reduce the length used to access the field.
 If the error occures in a non-modified SAP program, you may be able to
 find an interim solution in an SAP Note.
 If you have access to SAP Notes, carry out a search with the following
 keywords:
 "DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
 "SAPLSTXK" or "LSTXKFRN"
 "TOKEN_COMMENT"
 If you cannot solve the problem yourself and want to send an error
 notification to SAP, include the following information:
 1. The description of the current problem (short dump)
 To save the description, choose "System->List->Save->Local File
 (Unconverted)".
 2. Corresponding system log
 Display the system log by calling transaction SM21.
 Restrict the time interval to 10 minutes before and five minutes
 after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938 if g_tm_open eq true or " Section
2939 g_tm_b_close eq true.
2940 l_token = '\chcbpat0'.
2941 l_len = strlen( l_token ).
2942 token_control = true.
2943 assign l_token to <itf1>.
2944 perform put_itf1_new using l_len.
2945 perform token_line_begin changing l_next_token.
2946 else. " without section
2947 concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948 l_len = strlen( l_token ).
2949 token_control = true.
2950 assign l_token to <itf1>.
2951 perform put_itf1_new using l_len.
2952 endif.
2953 elseif l_next_token-code eq ')L'. " \par
2954 l_token = '\par'.
2955 l_len = strlen( l_token ).
2956 token_control = true.
2957 assign l_token to <itf1>.
2958 perform put_itf1_new using l_len.
2959 elseif l_next_token-code eq '(C' or " \par + format
2960 l_next_token-code eq ')C' or
2961 l_next_token-code eq '(&' or
2962 l_next_token-code eq 'TA' or
2963 l_next_token-code eq 'SC' or
2964 l_next_token-code eq 'ST'.
2965 concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966 l_len = strlen( l_token ).
>>>>> itf_token(l_len) = l_token.
2968 token_control = true.
2969 assign l_token to <itf1>.
2970 perform put_itf1_new using l_len.
2971 endif.
2972
2973 * Step 7: (L to disarm
2974 if g_compose eq true and
2975 l_next_token-code eq '(L'.
2976 perform read_next_itf_token(rstxscan) using p_token.
2977 endif.
2978
2979 ENDFORM. " token_comment
2980 *&---------------------------------------------------------------------*
2981 *& Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 * add default language to rtf
2984 *----------------------------------------------------------------------*
2985 * -->P_HEADER text
2986 * <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
Rekha

Hi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel

Purpose of RSTXTRAN program for SAP-Script ?? ??

Purpose of RSTXTRAN program for SAP-Script ?? ??
when it is required to run that program ?

Hi sarit,
Purpose of RSTXTRAN program for SAP-Script Transfer of SAP script Texts to a Correction.
The report RSTXTRAN allows a set of SAP script texts (or the text key) to be transferred to a correction or repair of the transport system. The name of the correction/repair can either be transferred as a report parameter, or the correction/repair can be selected later in a selection window. The text key can be qualified generically using the asterisk character (*).
When the report has been executed, the list of selected texts appears. Individual texts can be deselected in this list. When the function "Continue" is executed, the final list of texts which are to be transferred is displayed. The transfer of texts to the correction/repair can now be activated by the appropriate function, and must be confirmed in a dialog box.The requirements for this as follows.
There is a correction/repair in which the selected text keys can be entered, if it is not being processed. The report can only insert text keys in corrections or repairs, not however in transport requests. However, the objects contained in a correction can be transferred to a transport request with the correction and transport system transaction.
It should also be noted that the report selects texts in the current client, but that the transport system generally exports texts from client 000.
When the report has been executed,the output can be a list of the selected texts. Information about whether transfer to the correction/repair was possible is displayed for each text key.
Reasons for failed transfer include
o the correction/repair is currently being processed
o the correction/repair does not exist
For Example
All German standard texts with the ID ST, whose names begin with SAPSCRIPT, are to be entered in the correction B20K009999. The report parameters are then assigned values as follows:
o Correction: B20K009999
o Text object: TEXT
o Text name: SAPSCRIPT*
Thanks,
Usha

Adding Fields to New Hire SAP Script, Text ID PAMA

Hi there,
I have successfully created a sapscript email to be sent via Dynamic Actions for the notification of New Hires and Terminations. This has been accomplished via feature M0001 (we have created two new features u2013 M00NH & M00TM), dynamic action (T588z), Business Workplace, distribution lists, etc. All are working correctly, and an email is being generated and forwarded to appropriate parties.
Now we have been asked to add extra fields to the SAP Script text for New Hire and Termination. These are text fields for Employee Group, Employee Subgroup, among others.
Our syntax has been set up as follows:
&'Employee Group:             'P0001-PERSG(02)&
&'Employee Group Text:        'T501T-PTEXT(20)&
&'Employee Subgroup:          'P0001-PERSG(02)&
&'Employee Subgroup Text:     'T503T-PTEXT(20)&
For the New Hire action, we are getting the Employee group and Employee subgroup codes to display but we are NOT getting the Employee Group or Employee Subgroup texts to display. To confuse the issue, we ARE getting these text fields to display for the Termination script. Our ABAP'er is also having difficulty determining how to bring in these fields to the New Hire script.
We have researched this website have tried the instructions given by one user..... which states that we needed to go to our SAPscript text and make the following changes:
" To get other HR data into your standard text (from SO10):
Insert > Symbols > Program symbols (now you'll see a list of print programs, and i guess this is where the ABAP grabs the data).
Highlight the one for HR Master data, and click the DDIC button.
Double click the table you need data from (e.g P0000, P0001 or P0002).
Finally select the field you want."
I have done this, but when I get to the Program symbols, I do not see a print program for HR Master Data. I only see RPUCOB02 - Processing of Qualifying COBRA Events and Letters & SAPMSSCE - SAPscript Standard Text Maintenance.
I tried to use the RPUCOB02 and inserted the text for Employee Subgroup as a test. But it did not work as the text still did not display.
The other oddity is that for the Termination sapscript text, the Employee Group and Employee Subgroup text displays correctly. To test our syntax, we then connect the Termination sapscript text to the 'New Hire' action and reran the New Hire action. The Employee Group and Employee Subgroup text fields then disappeared. So it worked when the action was a termination, but did not work when the action was New Hire.
The difference between these two actions is that the feature for the sapscript generation for New Hires is being generated upon saving of I0002 (which is created AFTER I0001) - we needed the Employee's name in the text. For the Termination action, the feature is set to generate the mail upon saving of I0001. This is the only difference between the two. But as I need the employee name to display, it seemed the best approach. I did try to generate the New Hire sapscript after saving of I0008, but had the same problem.
Does anyone know how we can add text fields to our New Hire sapscript text and actually get them to display? We would also like to display the Org Unit text (&'ORGEH_2nd_TEXT(40)&) or even the Supervisor (from the OM relationship). But they do not display for the New Hire sapscript either. And our ABAP'er is able to insert the Supervisor logic, but the field still does not display.
Thanks very much for any help.
Edited by: Cathryn Westgarth on Nov 17, 2009 6:23 PM
Edited by: Cathryn Westgarth on Nov 17, 2009 6:24 PM

I am going to repost this question to the HR forum as it may be more appropriately an HR forum questions.
Thanks
Cathryn

Text getting overwritten in first page of SAP Script

Hi All,
My Requirement:
1. I have a SAP Script which has a main window which prints the internal table data
2. I have created a instance of Mainwindow to display watermark.
3. Now, everything seems to be fine while displaying the watermark/foreground text.
Problem is:
4. If the data exceeds 15 records(i.e, end of the main page), 16th record starts printing from the top of the main window again.
5. This continues till the end of the 30th record(i.e., it is Overwriting all the first 15 records) and the 31st records is getting printed in the 2nd page.
6. FYI, I have maintained the header in such a way that 2nd Page should be triggered after the first.
7. Also, I have called the windows in the correct order
What could be the problem? Is it because, I have created an instance of main window to display the text. If that is the case, how to resolve this ??? Any thoughts on this would be highly appreciated

Hello Richa,
I tried creating a variable window and inserted a Watermark on it.The thing is, Watermark is not getting displayed.I tried both the ways calling the watermark before displaying the text and after displaying the text.
Hello Ravi,
See to display the watermark, I created an instance of mainwindow by using
So, this main window which is an instance of the actual main window will have the same co-ordinates.
I think, this has got nothing to do with that. But, there is something that is missing out here.
Hello Rajani,
I tried using Protect and End Protect. But, it didnot work
Hello Sarves,
I tried creating a variable window exactly the size of the main window and then placed the variable window back of the main window. But, I am not able to see the watermark in the preview.
If I am missing something, please let me know.
Thanks in advance........

Regarding Address EndAddress in SAP Script

Hi Abapers,
I am having a problem while displaying the address in SAP Script through Address EndAddress.
Problem is it is displaying the data correctly but it display the Region Code. Now the requirement is to display the Region Description instead of the Region Code.
Can you please provide me any solution for this.
I am sending the Address EndAddress which I have written in my code.
/: ADDRESS DELIVERY PARAGRAPH ZC
/: NAME &VBDKL-ZBTNAME1&, &VBDKL-ZBTNAME2&, &VBDKL-ZBTNAME3&, &VBDKL-
/: STREET &VBDKL-ZBTSTRAS&
/: CITY &VBDKL-ZBTORT01&, &VBDKL-ZBTORT02&
/: POSTCODE &VBDKL-ZBTPSTLZ&
/: COUNTRY &VBDKL-ZBTSLAND&
/: REGION &VBDKL-ZBTREGIO&
/: FROMCOUNTRY &VBDKL-ZBTLLAND&

Hi
ADDRESS and ENDADDRESS is used to specify the address which will
be formatted according to the target country i.e the recipient country.
e.g. /:ADDRESS sales PARAGRAPH C
/:NAME &KNA1-NAME1&
/:STREET &KNA1-STRAS&
/:POSTCODE &KNA1-PSTLZ&
/:CITY &KNA1-ORT01&
/:COUNTRY &KNA1-LAND1&
/:FROMCOUNTRY 'DE'
formatting address
http://help.sap.com/saphelp_46c/helpdata/en/d1/803238454211d189710000e8322d00/frameset.htm
http://help.sap.com/saphelp_40b/helpdata/en/d1/803238454211d189710000e8322d00/content.htm
Reward if usefull

In SAP Script the form is not printing in required format

hi
in my sap script i am facing a issue. when i trigger the output on the screen, first page is coming correctly but second page has mixed up the alignment, i want to say the footer is coming up and main window box has gone sb total window shift to left while it should be right.
regards
atul

Hey Mishra,
Check in the page 2 Layout in your scrit form. The layout what you created for second page allighment is not correct. It seems you need to change the the footer and main in all the pages. Goto Page Windows -> Select the Seond page Name -> and check the layout ( Setting -> Form Painter).
Regards,
Saravanan M

Prob in Trigerring Correct Sap-Script

Similar Messages

Maybe you are looking for