Proble with the Standard role(eu_role)

Hi All,
I am facing some problem with Standard Role(eu_role). Actually i copied the standard role from the path
Portal Content -> Content Provided By SAP -> End user content -> Standard Role and pasted it in Portal Content itself, when i am trying to assign the copied eu_role to the user in User Administration the copied role is not getting displayed in "Available Roles".
Can any one help me out to solve this problem.
Thanks & Regards,
Ramesh.

I did not find any radio buttons as you said beside the reply
select radio button whose answer resolved your issue.
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
Thanks & Regards,
Ramesh.

Similar Messages

Problem with the standard RMDATIND

Good afternoon
I say that tango is a problem with the standard load of the material RMDATIND where the burden me all the good materials but in the CAT type of feedstock me what brand as subject to lot but I do not step parameter that the program that will be That someone can help me ..

Thanks for the suggestion to debug the problem - but I have no idea what I'm looking for.
I answer to your question, this is not restricted to just the one user. It has happened to a few, but not all. Not sure what the trigger is.
Now it has happened for a non-portal user, that is to say when I run it test mode from SE80. Debugging has not shed any light on it. All behaves as I would expect. All the alv formatting code is executed, then the component loads and by default the 'standard view' has all column set as hidden.
Looking at this from a different perspective, when, in an alv you create a custom view and 'save as' to store the settings, does anyone know where that is saved too ? Can we delete the settings for the user ? or see the personalization ?

How to map the bulk users with the required roles in portal at one time

Hi,
Would anyone tell me how to map the bulk users with the required roles in portal at one time?

Thanks for all the reply.
<b>I need to assign 1 or 2 group to n((eg) 1000)number of users</b>
I tried the first option like
[group]
gid=
gdesc=
user=
Thr problem with this is I could n't put more no of users in the notepad.
I would be able to put only 150 users in the single line of notepad. If it goes to next line it is not working.
I tried creating seperate notepad but in Import it says "exists"
I'm not sure about LDAP. Would anyone explain me the best approach to do this.

Has anyone else had problem with the STANDARD package?

Hi Oracle gurus, has anyone here had the same problem with the STANDARD package? Or do I have to reinstall Oracle to make it work?
Thanks.
Ben

missesboggs wrote:
I literally just called AT&T and Apple about this today. I was having issues with iMessage and texting my husband. His texts back to me would show up as my name. Turns out it's because we share the same AppleID. So, I'm currently trying to change mine, but it hasn't worked so far. I'm on hold with Apple right now to see if I can get it fixed.
Both of you have registered the same email address for iMessage. If you were using a shared Apple ID and you updated your phones to iOS5, the default will be the Apple ID. Go into settings and change it.

List of Portal users with the assigned Roles.....

Hello All,
I am working on EP6 SP9 and want to know from where can I get a list of all Portal users along with the assigned roles for each of them.
One way I found is by searching for all users in User Administration role and along with the searched users, there is also an icon for Assigned roles.
Apart from the above mentioned way, is there any other way by which I can get a direct list of the same. Is there a Java sample code for this.....?
Please help.
Awaiting Reply.
Thanks and Warm Regards,
Ritu R Hunjan

Hi Ritu,
Yes it is possible to get the roles of the users. You can try the following java code.
package com.hcl.user;
import java.util.Iterator;
import java.util.Vector;
import com.sap.security.api.IRole;
import com.sap.security.api.IRoleFactory;
import com.sap.security.api.IRoleSearchFilter;
import com.sap.security.api.ISearchResult;
import com.sap.security.api.IUser;
import com.sap.security.api.IUserAccount;
import com.sap.security.api.IUserFactory;
import com.sap.security.api.UMFactory;
import com.sapportals.portal.prt.component.AbstractPortalComponent;
import com.sapportals.portal.prt.component.IPortalComponentRequest;
import com.sapportals.portal.prt.component.IPortalComponentResponse;
public class role_member extends AbstractPortalComponent {
public void doContent(
IPortalComponentRequest request,
IPortalComponentResponse response) {
try {
IUserFactory userfactory = UMFactory.getUserFactory();
IRoleFactory rolefactory = UMFactory.getRoleFactory();
IRoleSearchFilter rolefltr = rolefactory.getRoleSearchFilter();
rolefltr.setMaxSearchResultSize(2000);
ISearchResult result = rolefactory.searchRoles(rolefltr);
while (result.hasNext()) {
response.write("<table border=0>n");
String uniqueid = (String) result.next();
IRole role = rolefactory.getRole(uniqueid);
response.write("<tr><td bgcolor=Red>"+ role.getDisplayName()+ "</tr></td>n");
Iterator users = role.getUserMembers(true);
while (users.hasNext()) {
String unique_user = (String) users.next();
IUser user = userfactory.getUser(unique_user);
IUserAccount account[] = user.getUserAccounts();
response.write(
"<tr><td>" + account[0].getLogonUid() + "</tr></td>n");
response.write("</table>n");
response.write("</br>n");
} catch (Exception e) {
This code gives you the list of all the users of your portal along with the roles assigned to them.
Apart from this if you want you want to know all the roles assigned to the user on portal itself then the way you mentioned is the correct method.
Regards
Pravesh
PS: Please consider awarding points.

Regarding attachment of own smartforms with the standard report

hi experts,
cud u plz tell me how to attach our own smartforms with the standard report i.e if i want to attach a smart forms with me23n to get the printout......plz help me...

Hi
Goto the NACE tcode and attache the own smartform and attach to the output type
NACE is the Tcode used to link the Application type, Output Types and its processing Routines like ( Driver programs and attached Script forms or Smartforms).
You should know the Application of a document first Like:
for PO it is EF, for sales Doc's it is V1, for Delivery docs it is V2, for billing Doc's it is V3 etc.
so first select the Application type (ex: EF) for PO and press OUtput types
then a list will come in that you should know the related output type for PO.
in this case it is NEU,
select that and click on the processing Routines button on the left side
it will display the Medium, Driver Program and the Script form or smartform related to that document..
<b>Reward points for useful Answers</b>
Regards
Anji

Mail app always starts with the standard account.

iPhone 5s
iOS 7.1.2
Mail app always starts with the standard account.
Can´t it start in the mail overview, where all different mailboxes are shown.
iPhone 4 did it..
Opens in standard account:
Should open in MailBox-Overview: (here just one mailbox)
7.1.2

After some searching I have found a solution. I had to delete the contents of the following folder:
~/Library/Mail/myemailaccount/.OfflineCache/
Note: replace "myemailaccount" with the appropriate folder on your computer that represents your e-mail account. Once I deleted the contents of this folder (there were 2 files), and restarted Mail, there were no problems.
Hope this helps a few people in the future!

Is there a DTP programme that comes with the standard Macbook Pro or would I have to buy Pages etc?

Is there a DTP application that comes with the standard Macbook Pro or would I have to buy Pages or a similar app? Thanks.

http://store.apple.com/us/browse/home/shop_mac/family/macbook_pro?mco=MTM3NjU5Mz U

Customized Pf Status along with the standard Pf status

Hi all
I have created an ALV report and has its default pf status which includes all function like sum ,sort, export, variants save etc.
I have a requirement to have an extra push button along with this PF status.
I have created a pf status with this button.. and activated and called in REUSE_ALV_GRID_DISPLAY and did everything..
But in my output, only my customised pf status is displayed ie only the push button is displayed and all other standard functions are gone..
Can anyone help me to solve this problem.
Ie I want one push button along with the standrad pf status in ALV report using REUSE_ALV_GRID_DISPLAY .
Cheers
Christina

Hi All
Creation of new button in output refer below document and screen
if you want to add one more button in the Red line like below.
Reffer Below steps after that you can create or change STANDARD Gui in the program .
Go to Se41 give details like below.
Select Copy Status button in up. As shown below screen.
You will get below screen. Provide your custom program name.
Like below screen. Click on Copy.
You will get below screen click on copy button.
You will get below status.
Click on Activate like as shown in below.
Click on OK button you will get it in your program.

Problem with the standard process HR_PD_MOVE_POSITION

Hello.
I try to use the standard process HR_PD_MOVE_POSITION to change an assignment of position. I started the process via the link Start Organizational Process after that filled an Adobe-form. Later a WF 04000035 which links with the process, started. But the first step of WF ended with the status ERROR.
In the Step History tab (transaction SWI1) I see the next errors:
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
    CREATE - Error when creating a component of type 'Step'
      CREATE_WIM_HANDLE - Error when creating a work item
        CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
          EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Could you tell me where a mistake can be?
Thanks.

Hi,
Could you please share if this error is resolved & how?
Thanks,
Raj

Issue with the standard SAP Extractor 2LIS_04_P_COMP

Hello gurus,
I am working on the PP and PM module. the standard extractor 2LIS_04_P_COMP is already in use in the development system .
I have made the changes to the Production Order (PO) and check the delta for the BW load the changes in the field release, deliver and PO confirm are not populated with the values, But when i check the same in COR3 tcode this PO has the above all status.
Could you please let me know why its behaving in this way. did any one has faced this scenario..
Regards

Hello Gurus,
In this extractor i am getting the negative values for the ENMNG (Withdrawn Quantity) field for the after image records, for the good which are consume for the prodution. so i am getting the values in the report level as negative. could any one kindly let me know what the logic working behind this.
Regards

Problems with the Standard Greeting CUE

Good Day All,
I am running Cisco Unity Express version 3.2.2 in a Cisco 2851 router.
A user has logged onto her voicemail and was attempting to change the initial default settings for her Unity Express account.
She is using a 7942 phone.
I got around the problem by setting up her voicemail from a shared line on another phone.
The strange thing is that when the user tried to record her name in CUE, the system seemed to ignore her request and kept the default settings.
When I configured another phone with a shared line, I had no problems updating the CUE server.
Any ideas , thoughts?
thanks very much for any help.
Regards
Amanda

Hello everybody, i am very happy that you want to help me!
I have already got those drivers for the audio, and even if it's actually better with them, its still a problem.
As for the ram, can i check that on the actual ram or with a program? Because when i bought it, it said 512mb "Standard" DDR, nothing more.
The cpu was all right when i upgraded it, so thats not a problem. As for the xp messenger update, i dont think it's that because i am now running windows 2000 and have tried running xp, 2000 and 98 with the same problems.
Here are my IRQs:
IRQ Number   Device
11   NVIDIA nForce PCI System Management
11   Standard Enhanced PCI to USB Host Controller
11   NVIDIA nForce MCP Networking Adapter #2
5   Standard OpenHCD USB Host Controller
5   Realtek AC'97 Audio
10   Standard OpenHCD USB Host Controller
10   NVIDIA GeForce4 MX Integrated GPU
14   Primary IDE Channel
15   Secondary IDE Channel
1   PC/AT Enhanced PS/2 Keyboard (101/102-Key)
4   Communications Port (COM1)
3   Communications Port (COM2)
6   Standard floppy disk controller
8   System CMOS/real time clock
13   Numeric data processor
12   Logitech PS/2 Port Mouse
As for those ram timings, that sound like something i should try. I lack some of those skills so if you could detail what i should set in bios i would apreciated so i dont mess something up
Something just hit me. I have been suspicious about the ram for a while now but now i know, of course it must be the ram. I put in an GeForce2 MX in and it worked splendid, and thats because it has its own memory, i would beleve that it's the same thing with the sound perhaps. If i am not entierly mistaken the sound card probably use my ddr memory as a buffer, right?
Thanks!

Replace an existing enterprise software device with the standard one for 8700f ?

I have a software device on my 8700f which was installed with a security option from my previous employer (Password in addition to the PIN code + Security time out). How to replace this installed software with a standard one from Blackberry?
Solved!
Go to Solution.

Oh right. good catch JSanders.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

How to test with the standard Flash player, rather than debug player

Folks,
I am interested in running my flexunit 4 tests against the standard flash player, rather than the debug player that comes with the SDK. Is this possible?
BTW, I am working on Windows for now.
I installed both the flash ActiveX control for IE, and the standard flash plugin for Firefox. I then associated the SWF file extension with Firefox using the "Open With" dialog. I had to choose a single program, and the browser appeared to be my only choice, as I could not find any sort of "FlashPlayer10.exe" to associate with. I ran my ant script that calls <flexunit>, and it kind of works. It launches Firefox, runs the tests, and the results get piped back, but Firefox is not shut down. Yep, Firefox stays open after the tests complete. I seem to recall that the debug flash player would close itself after being opened by <flexunit>. I tried using IE, and the same result occurs: the browser is not shutdown after the tests complete. This behavior makes for an unacceptable test setup, as eventually the system memory on the machine will be exhausted as more and more browsers are opened and not closed.
Questions/options:
1) Is there a standard flash player "executable" somewhere on my system that I can associate the SWF files with (that would hopefully shut itself down)?
2) Second choice, is there a way to get the browser to close after <flexunit> completes?
3) or am I stuck using the debug player? I am concerned that testing management at my company might not like the fact that we are testing against a debug player, rather than the standard one that users will likely be using. If flexunit 4 CI only supports the debug player, is there something I can say to appease management?
Thanks for any help...
Trevor

@trevorbutler - Here are my 2 cents, but the group may have a different perspectives for your questions.
Currently, we suggest the use of the CIListener class as a FU4 listener for use when building your test SWF to run via the FU4 Ant task. This class (http://opensource.adobe.com/svn/opensource/flexunit/branches/4.x/FlexUnit4CIListener/src/o rg/flexunit/listeners/CIListener.as) uses the fscommand() function to send a message to its host environment to exit (i.e. - fscommand("quit")). This command is only recognized by the Flash projector and stand-alone players, which are thin wrappers around the Flash Player so that it may be executed as its own process in the OS. Based on the setup you are describing, the behavior you're seeing should be expected since the browser is the host environment for the Flash Player. When the browser recieves the resulting message of the fscommand("quit") call nothing will happen since the browser doesn't support this command. If you use the Flash projector or stand-alone players however, they will exit when recieving the results of this command. The projector/stand-alone players come in two flavors, release and debug. Release will act very closely to the typical plugin installed in the web browser (e.g. - swallows errors, no debug support, etc) whereas debug will allow you to write log files to the system, show error messages, etc. Currently the debug stand-alones are available on Windows, Mac, Linux and the release stand-alone is only available on Linux.
To address your questions:
1. If you've installed the Flash Player browser plugin, there is no way that I know of to launch the player as its own process. I've only had success using the projector/stand-alone player (http://www.adobe.com/support/flashplayer/downloads.html).
2. The Flash Player does have the ability to send javascript to the browser to ask it to close the current window, but most modern browser will prompt the user to confirm they'd like to close the window if its the only open window. Additionally, taking this approach on Mac, the browser process would remain active until an explicit call is made to the host OS to shut down the browser process. The Ant task could be enhanced to use the browser to launch the Flash Player, but that is not currently on our checklist of features to support. If it's something you'd be interested in contributing, let me know and I can work with you on this.
3. For the time being the FlexUnit4 Ant task only supports the stand-alone Flash Player (and adl soon), which for Windows only comes in the debug flavor. The only thing I've run into with the stand-alone player is that ExternalInterface reports that its enabled, but since the host environment is not the browser, javascript calls made via this class will fail, consequently causing tests to fail. I haven't tried anything with shared objects or flashvars but my assumption is that they should work correctly, but anything that depends on the browser has the potential not to.
As far as your testing management goes, I would discuss with them the problem context FlexUnit4 hopes to solve. The framework is intended to produce unit and integration tests. Functional testing is not withing the scope of the library. Although, it's technically feasible to write integration tests which will exercise components similarly to a functional test, tools such as FlexMonkey, Selenium Flex, QTP, etc are much better geared towards this problem domain. Test recording and playback, using these tools, is typically done using the FP browser plugin and is much easier to use by most QA and testing staff. At the end of the day, as we're testing our code using FlexUnit at a smaller granularity than that of which the user interacts with in our application. To reliably test the applicaiton as the user would interact with it requires additional tooling and a different type of testing.
Like I said, just my take, maybe some of the other guys can help as well.

Associating attribute dimensions with the standard dimension in EIS

Hi... we need to bring 2 attribute dimensions in to the Metaoutline of EIS.These 2 attribute dimensions must be associated with lev 0 member of the standard dimension.how to achieve in EIS?
The current status: we did the olap model by mapping all the dimensional tables with the fact table and we are struck up how to bring the 2 attribute dimensions in to the model screen and association with standard dimesnion.
The table structure for the standard dimension is
column1/Gen-1     column2/Gen-2-Alis     consolidation     col3(Attr)     colu 4(Attri)
Reason-1     Reason-1-extension
Reason-2     Reason-2-extension
Reason-3     Reason-3-extension
col3 and col4 are attributes to be associated with column2.
Pls guide us the approach to be done in EIS..

Graham,
This is definitely a supported feature in EIS/9.3.1/ASO. I have many models with this type of structure. How you set it up can vary. Usually my Attribute Hierarchies are not that deep, only two to three levels, maybe four in a rare case, so I don't usually use a parent child table to set up the hierarchy (I'm not saying that it won't work, it might, I haven't tried, but same steps should apply). In a typical model I will have my stock table which has a buyer field. Then in another table I will have my attribute structure which will have columns for buyer, teams, and categories.
In EIS OLAP model, you add your attribute hierarchy table and use a join to link it to the main stock table, joining on the buyer field (you are now going from a "star" schema to a "snowflake". Go into the properties and make sure you define all the columns as "Attributes".
Then in Metadata model, drag your categories attribute onto the outline, then drag the teams and set it as a child of categories and finally drag buyer and set as child of teams. You only set the attribute association for the buyer back to the base dimension.
When you run your dim build it will set up your attribute dimension correctly.
Some things to keep in mind, make sure you have a process that ensures for every stock code you have in the main table, you have a matching one in your attribute dim table.
Sometimes, depending on how much manipulation I need to do, instead of joining the tables in EIS I will go back to relational source and create a view that joins the two tables together, then in my OLAP model, I have one table that has three attribute columns, one column for the buyer and then the other two for team and category, from that point setting up in metadata model is the same.
Good luck, let me know if you run into trouble.

Proble with the Standard role(eu_role)

Similar Messages

Maybe you are looking for