Problem about HTML reports gemerated by Oracle Report

We use Oracle Report to genereate Reports in HTML/CSS format.
Everthing is perfect if we make the report with less than 160 pages. Problems
come out when we have reports more than 159 pages. In Microsoft Internet
Explorer (5.0 or 5.5), it can show the content of page 1 to page 159 correctly.
But the content from page 160 onwards is displayed in a mess and words in
those pages (we don't have image, just text) overlap.
If we prview the print-out of the report, in IE 5.5, the format is a different
from what we want. Although we can print it out with format distorted, we can
only print from page 1 to 159 but not from page 160 tothe end.
With Netscape (4.76), we can open the report correctly(but using a longtime!).
When we try to print or preview it, the system shows no response and seems
crashed. We gave it up after two hours.
Does anyone have suggestions on that?

hello,
in my oppinion 160 pages is VERY long for a HTML document.
as both browsers have problems displaying the files, i would assume they simply can not handle such large files.
what you could to to check that, is to create the output to file and then remove the first 100 or so pages using a text editor and see if the pages that were screwed up before are now OK. if so, it is definitly a problem between the browsers and the filesize.
regards,
the orale reports team

Similar Messages

Problem calling XML Report Publisher from Oracle Reports

Hi,
I'm facing a problem in calling XML Report Publisher from Oracle Reports.
Basically, I'm trying to customise Dunning Letter program. The program which is submitted calls another program. I have customised the second program and added a call to a stored procedure which in turn calls XML Report Publisher.I have created a template and attached it to the second program as well.
The procedure code is as follows.
v_request_id := FND_REQUEST.SUBMIT_REQUEST(application => 'AR'
,program => 'ARDLP_NON_SRS'
,description => 'Dunning Letter Print from Dunning Letter Generate'
,sub_request => FALSE
l_status := fnd_concurrent.WAIT_FOR_REQUEST
( REQUEST_ID => v_request_id,
INTERVAL => 15,
MAX_WAIT => 180,
PHASE => l_phase,
STATUS => l_status_code,
DEV_PHASE => l_dev_phase,
DEV_STATUS => l_dev_status,
MESSAGE => l_message );
v_xml_req_id := FND_REQUEST.submit_request(application => 'XDO',
program => 'XDOREPPB',
 argument1 => v_request_id,
argument2 => 'FLS DE AR Dunning Letter Print - German',
argument3 => 603, -- changed 665 -- was 551,
argument4 => NULL,
argument5 => 'N',
argument6 => 'RTF',
 argument7 => 'PDF');
Now, there are two problems I'm facing...
1. when the second program('Dunning Letter Print from Dunning Letter Generate') gets called it executes this procedure ... logically the 'Dunning Letter Print from Dunning Letter Generate' should get called twice ... second time from the procedure. Its getting called multiple times .. as many as 15 - 20 times.
2. The Xml Report Publisher program ultimately gets called but its erroring out with the following error:
java.sql.SQLException: No corresponding LOB data found :SELECT L.FILE_DATA FILE_DATA, DBMS_LOB.GETLENGTH(L.FILE_DATA) FILE_LENGTH, L.LANGUAGE LANGUAGE, L.TERRITORY TERRITORY, B.DEFAULT_LANGUAGE DEFAULT_LANGUAGE, B.DEFAULT_TERRITORY DEFAULT_TERRITORY,B.TEMPLATE_TYPE_CODE TEMPLATE_TYPE_CODE, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.START_DATE START_DATE, B.END_DATE END_DATE, B.TEMPLATE_STATUS TEMPLATE_STATUS, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.DS_APP_SHORT_NAME DS_APP_SHORT_NAME, B.DATA_SOURCE_CODE DATA_SOURCE_CODE, L.LOB_TYPE LOB_TYPE FROM XDO_LOBS L, XDO_TEMPLATES_B B WHERE (L.LOB_TYPE = 'TEMPLATE' OR L.LOB_TYPE = 'MLS_TEMPLATE') AND L.APPLICATION_SHORT_NAME= :1 AND L.LOB_CODE = :2 AND L.APPLICATION_SHORT_NAME = B.APPLICATION_SHORT_NAME AND L.LOB_CODE = B.TEMPLATE_CODE AND ( (L.LANGUAGE = :3 AND L.TERRITORY = :4 ) OR (L.LANGUAGE = :5 AND L.TERRITORY = :6) OR (L.LANGUAGE= B.DEFAULT_LANGUAGE AND L.TERRITORY= B.DEFAULT_TERRITORY ) )
I have checked from database that the XDO_LOBS/ XDO_TEMPLATES_B table has corresponding registration data.
I don't know what's creating the problem.
If anyone has customised the Dunning Letter program before or having any idea about this problem, please help me out ..
Thanks

satrajit,
Now I am getting the same error you got, Can you please tell me the solution you found?.
XML Report Publisher 5.0
Updating request description
Waiting for XML request
Retrieving XML request information
Preparing parameters
Process template
--XDOException
java.sql.SQLException: No corresponding LOB data found :SELECT L.FILE_DATA FILE_DATA, DBMS_LOB.GETLENGTH(L.FILE_DATA) FILE_LENGTH, L.LANGUAGE LANGUAGE, L.TERRITORY TERRITORY, B.DEFAULT_LANGUAGE DEFAULT_LANGUAGE, B.DEFAULT_TERRITORY DEFAULT_TERRITORY,B.TEMPLATE_TYPE_CODE TEMPLATE_TYPE_CODE, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.START_DATE START_DATE, B.END_DATE END_DATE, B.TEMPLATE_STATUS TEMPLATE_STATUS, B.USE_ALIAS_TABLE USE_ALIAS_TABLE FROM XDO_LOBS L, XDO_TEMPLATES_B B WHERE L.LOB_TYPE = :1 AND L.APPLICATION_SHORT_NAME= :2 AND L.LOB_CODE = :3 AND L.APPLICATION_SHORT_NAME = B.APPLICATION_SHORT_NAME AND L.LOB_CODE = B.TEMPLATE_CODE AND ( (L.LANGUAGE = :4 AND L.TERRITORY = :5 ) OR (L.LANGUAGE = :6 AND L.TERRITORY = :7) OR (L.LANGUAGE= B.DEFAULT_LANGUAGE AND L.TERRITORY= B.DEFAULT_TERRITORY ) )
 at oracle.apps.xdo.oa.schema.server.TemplateInputStream.initStream(TemplateInputStream.java:309)
 at oracle.apps.xdo.oa.schema.server.TemplateInputStream.<init>(TemplateInputStream.java:187)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.getTemplateFile(TemplateHelper.java:776)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:1269)
 at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:807)
 at oracle.apps.fnd.cp.request.Run.main(Run.java:148)

Migrating to Oracle Reports 6i from Oracle Report 9i

Hi all,
We re-compiled original Forms & Reports 6i source code with Oracle 9i Forms & Reports.
Forms are working really nice with almost no change at all with Oracle 9ias Forms services and Oracle 8i as db. The Oracle 9ias server is W2k. Will be upgrading to oracle 9i db in a short time.
The only change we applied to forms source code was the function to call reports. We are using WEB.SHOW_DOCUMENT() instead of RUN_PRODUCT.
i.e. the URl is formed in all reports as
http://ip_address:port/reports/rwservlet?DESTYPE=cache&DESFORMAT=PDF&userid=user/passwd@dbname&report=f:\web\formas\ametas\REP_DET_METAS_DPTO.REP&estrategia_par='08'&centro_par=249&depto_par=27100&anio_par=2003&TRIMESTRE_PAR=1
At the beginning we used directly the 6i reports but they were running inconsistently, after several calls to reports they got stock and we did need to reboot report services.
Then as a suggestion we re-build only two reports in reports 9i for testing. But same result when running in combination with 6i reports. Combination means, sometimes called 6i reports someothers reports in 9i.
The reports run fine several times but inconsistently. What I mean is that they can be running normaly many times and suddenly the reports server sends this message
REP-50002:Server is shutting down
DBA reported this issue to our local support but they said configuration is ok.
In other tests and only running 9i reports it seems not getting stock never, at least we run two 9i reports more than 40 times. So the problem seems to be when we run 9i reports in combination with 6i reports. We are planning to migrate all our reports but this mean to rebuild all reports again.
Is someone facing this kind of problem?
Or is this the only solution? Losting men/machine hours rebuilding the reports.
Any suggestion for my DBA to check in configuration?

Sorry for the confusion the subject for this issue should be
Migrating to Oracle Reports 9i from Oracle Reports 6i

Generatation of 4 PDF Reports from One Oracle reports 10 G

Hi All,
i am generating 4 PDF reports from one Oracle reports in 10 G.
i used RUN_REPORT_OBJECT built in 4 times with some different parameter list at a single time.
some time it generates but some time it generate 2 or 3 out of 4.
Can you anyone help me on this issue.
Regards,
Abhishek
Code that i used for generation of report:
on key-F0:
DECLARE
 PL_ID PARAMLIST;
 PL_NAME VARCHAR2(10) := 'REP';
 USRNM VARCHAR2(50);
 pl_id2 paramlist;
 pl_name2 varchar2(10):= 'REP';
 usrnm2 varchar2(50);
 pl_id3 paramlist;
 pl_name3 varchar2(10):= 'REP';
 usrnm3 varchar2(50);
 pl_id4 paramlist;
 pl_name4 varchar2(10):= 'REP';
 usrnm4 varchar2(50);
BEGIN
 USRNM := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID := GET_PARAMETER_LIST(PL_NAME);
 IF NOT ID_NULL(PL_ID) THEN
 DESTROY_PARAMETER_LIST(PL_ID);
 END IF;
 PL_ID := CREATE_PARAMETER_LIST(PL_NAME);
 IF ID_NULL(PL_ID) THEN
 MESSAGE('Error Creating Parameter List ');
 END IF;
 ADD_PARAMETER(PL_ID, 'P_PRNT_C_FAM_ID', TEXT_PARAMETER, :PRNT_C_FAM_ID);
 ADD_PARAMETER(PL_ID, 'P_NOTICE_DATE', TEXT_PARAMETER, TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
 ADD_PARAMETER(PL_ID, 'P_REDET_DATE', TEXT_PARAMETER, TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
 ADD_PARAMETER(PL_ID, 'USR_NM', TEXT_PARAMETER, USRNM);
 ADD_PARAMETER(PL_ID, 'SCHEDULE', TEXT_PARAMETER, :RUN_TIME);
 ADD_PARAMETER(PL_ID,'P_PRNT_PROV',TEXT_PARAMETER,'PRNT');
 ADD_PARAMETER(PL_ID, 'P_ENG_SP', TEXT_PARAMETER,'N');
 REDET_REPORT('506',PL_ID,'CT506_Parent_FamId_Eng'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
 USRNM2 := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID2 := GET_PARAMETER_LIST(PL_NAME2);
 IF NOT ID_NULL(PL_ID2) THEN
 DESTROY_PARAMETER_LIST(PL_ID2);
 END IF;
 PL_ID2 := CREATE_PARAMETER_LIST(PL_NAME2);
 IF ID_NULL(PL_ID2) THEN
 MESSAGE('Error Creating Parameter List');
 END IF;
 ADD_PARAMETER(PL_ID2,'P_PRNT_C_FAM_ID',TEXT_PARAMETER,:PRNT_C_FAM_ID);
 ADD_PARAMETER(PL_ID2,'P_NOTICE_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
 ADD_PARAMETER(PL_ID2,'P_REDET_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
 ADD_PARAMETER(PL_ID2,'USR_NM',TEXT_PARAMETER,USRNM2);
 ADD_PARAMETER(PL_ID2,'SCHEDULE',TEXT_PARAMETER,:RUN_TIME);
 ADD_PARAMETER(PL_ID2,'P_PRNT_PROV',TEXT_PARAMETER,'PRNT');
 ADD_PARAMETER(PL_ID2,'P_ENG_SP',TEXT_PARAMETER,'Y');
 REDET_REPORT('506',PL_ID2,'CT506_Parent_FamId_Sp'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
 USRNM3 := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID3 := GET_PARAMETER_LIST(PL_NAME3);
 IF NOT ID_NULL(PL_ID3) THEN
 DESTROY_PARAMETER_LIST(PL_ID3);
 END IF;
 PL_ID3 := CREATE_PARAMETER_LIST(PL_NAME3);
 IF ID_NULL(PL_ID3) THEN
 MESSAGE('Error Creating Parameter List');
 END IF;
 ADD_PARAMETER(PL_ID3,'P_PRNT_C_FAM_ID',TEXT_PARAMETER,:PRNT_C_FAM_ID);
 ADD_PARAMETER(PL_ID3,'P_NOTICE_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
 ADD_PARAMETER(PL_ID3,'P_REDET_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
 ADD_PARAMETER(PL_ID3,'USR_NM',TEXT_PARAMETER,USRNM3);
 ADD_PARAMETER(PL_ID3,'SCHEDULE',TEXT_PARAMETER,:RUN_TIME);
 ADD_PARAMETER(PL_ID3,'P_PRNT_PROV',TEXT_PARAMETER,'PROV');
 ADD_PARAMETER(PL_ID3,'P_ENG_SP',TEXT_PARAMETER,'N');
 REDET_REPORT('506',PL_ID3,'CT506_Prov_ProvId_Eng'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
 USRNM4 := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID4 := GET_PARAMETER_LIST(PL_NAME4);
 IF NOT ID_NULL(PL_ID4) THEN
 DESTROY_PARAMETER_LIST(PL_ID4);
 END IF;
 PL_ID4 := CREATE_PARAMETER_LIST(PL_NAME4);
 IF ID_NULL(PL_ID4) THEN
 MESSAGE('Error Creating Parameter List');
 END IF;
 ADD_PARAMETER(PL_ID4,'P_PRNT_C_FAM_ID',TEXT_PARAMETER,:PRNT_C_FAM_ID);
 ADD_PARAMETER(PL_ID4,'P_NOTICE_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
 ADD_PARAMETER(PL_ID4,'P_REDET_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
 ADD_PARAMETER(PL_ID4,'USR_NM',TEXT_PARAMETER,USRNM4);
 ADD_PARAMETER(PL_ID4,'SCHEDULE',TEXT_PARAMETER,:RUN_TIME);
 ADD_PARAMETER(PL_ID4,'P_PRNT_PROV',TEXT_PARAMETER,'PROV');
 ADD_PARAMETER(PL_ID4,'P_ENG_SP',TEXT_PARAMETER,'Y');
 REDET_REPORT('506',PL_ID4,'CT506_Prov_ProvId_Sp'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
 Message('Notice Submitted For Printing');
 EXIT_FORM;
END;
Program unit:
PROCEDURE REDET_REPORT(rep_name in Varchar2,plist in ParamList,rep_pdf_name in Varchar2)IS
 filecode varchar(2);
 Repnm varchar(30);
 report_id REPORT_OBJECT;
 report_id_hear REPORT_OBJECT;
 report_prop VARCHAR2(20);
 v_rep VARCHAR2(100);
 rep_status VARCHAR2(200);
 bat_loc varchar2(200);
 time_slot varchar2(100);
 rep_folder_name varchar2(100):='Redet Notice for Packets Sent\';
BEGIN
 Filecode := init.GetFileNmCode;
if filecode <> 'FL' then
if upper(substr(rep_name,1,2)) ='CC' then
RepNm := filecode||substr(rep_name,3);
else
 if rep_name != 'viewerr' then
RepNm := filecode||rep_name;
 else
 RepNm := rep_name;
 end if;
end if;
end if;
 Begin
 begin
 report_id := find_report_object(RepNm);
 if error_code = '41219' then
 Message('Unable to execute : '|| RepNm);
 Raise FORM_TRIGGER_FAILURE;
 end if;
 end;
 set_report_object_property(report_id, REPORT_FILENAME, RepNm);
 set_report_object_property(report_id, REPORT_SERVER, init.Appl_Repserver);
 SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, BATCH);
 SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE,SYNCHRONOUS);
 set_report_object_property(report_id, REPORT_DESFORMAT,'PDF');
 select rprm_param_val||rep_folder_name||rep_pdf_name||'.pdf' into bat_loc from rprm where rprm_param_name = 'BAT_LOC';
 SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,FILE);
 SET_REPORT_OBJECT_PROPERTY(REPORT_ID,REPORT_DESNAME,'"'||bat_loc||'"');
 begin
 v_rep := RUN_REPORT_OBJECT(report_id,plist);
 exception when others then
 Message('Error While executing running reports ::'||error_code);
 end;
 end;
END;

Abhishek,
Please post your question in the Reports forum. This forum is for Forms related questions.
Craig...

Where is the forum for Fusion Report Service with Oracle Reports?

Where is the forum for Fusion Report Service with Oracle Reports?

You could try this one, maybe post your question.

REP-52266: The in-process Reports Server rep_adminserver_ikit_asinst_1 failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0

Hi,
I have installed oracle forms and reports 11gR2 on Windows 7 Professional 64bit (and configured in development mode), the forms are working fine but when i run a report i get this message
REP-52266: The in-process Reports Server rep_adminserver_ikit_asinst_1 failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0

I was trying to add a new destination:
<destination class="oracle.reports.server.DesMail" destype="mail"/>
I couldn't make it work , so I commented my changes.
In fact, I should have gone back to a backup file , as weblogic seemed to have changed the file itself!! (attributes of the xml tags were in different order, and more things ...) but just undoing what I have done did the trick.
This file seems to be quite picky, I left this tag uncommented
</pluginParam>
and the same REP-5226 error happened.

Not able to start report server component, getting error : oracle.reports.RWException: IDL:oracle/reports/RWException:1.0

[2014-06-03T14:16:13.257+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [] [oracle.reports.servlet] [tid: 18] [userId: <anonymous>] [ecid: 0000KPXe7kGFk3S6yFaeMG1JZR_f00000G,0:1] [APP: reports#11.1.2] ServerManager:getServer Bind to Reports Server rep_wls_reports_xyz_asinst_1 failed.
[2014-06-03T14:16:13.258+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-51002] [oracle.reports.servlet] [tid: 18] [userId: <anonymous>] [ecid: 0000KPXe7kGFk3S6yFaeMG1JZR_f00000G,0:1] [APP: reports#11.1.2] REP-51002 : Bind to Reports Server rep_wls_reports_xyz_asinst_1 failed. [[
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
at oracle.reports.client.ServerManager.getServer(ServerManager.java:284)
at oracle.reports.client.ServerManager.isSecure(ServerManager.java:420)
at oracle.reports.client.ServerManager.isSecure(ServerManager.java:405)
at oracle.reports.rwclient.CommandManager.getServerSecuritySetting(CommandManager.java:347)
at oracle.reports.rwclient.ServletCmdMgr.handleWebCommand(ServletCmdMgr.java:319)
at oracle.reports.rwclient.RWClient.handleWebCommand(RWClient.java:1302)
at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1822)
at oracle.reports.rwclient.RWClient.doPost(RWClient.java:780)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3748)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3714)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2283)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2182)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1491)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Hi,
Please review following note:How to Troubleshoot Errors FRM-41213 / REP-51002 / REP-178 with Oracle Reports 10gR2 / 11g (Doc ID 460976.1)
Regards,

Problem in HTML and HTMLCSS format of reports

Hi
I'm using Report Builder 10.1.2.0.2 to build a tabular report, in the repot preview everything is ok but in the real time I have two problems :
1- When I try to generate html file or access the report with desformat=html some graphical formats like lines and background colors are gone!. When I see the source of the generated HTML file the tables border is 0. I changed the border to be 1px with solid style and black color but nothing happened.
2- When I try to generate htmlCSS file or access the report with desformat=htmlCSS the graphics is there but when I print the report there is some shift between the generated page and the printed page i.e: the printed pages are not the same like the report's pages. I added some code in the after page property as a page break but nothing changed
Any help will be appreciated
Thank you in advance

Hi
The best way to organize data and images to get them next to each other is to use a table (no borders) in your RTF template. Create a two celled table and drop the image into one and the text next to it.
Regards
Tim

HTML font size in Oracle Reports 11g

I am migrating from Oracle Reports 10g in OAS to Reports 11g in WebLogic.
However when I display all changed reports using Web Browser (same), the font size is changed(comparing the 10g reports to 11g reports). I would like to keep unchanged.
(command using DESTYPE=HTML)
May anybody can give me some guidance? (would like to see if there are any file or setting in EM which can alter the size of font in web)
Thanks.
Edited by: 817748 on 2011/7/19 上午 9:45

There is a better forum: {forum:id=84} for your question

Does Html tags interprets by oracle reports 10g?

Hi everyone,
I created a tabular style report on a table in which one of the column is like the following
TEST_TABLE
test_table_id 1
test_table_dsc aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaabbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbcccccccccccccccccccdddddddddddddddddddddddddd
when i diplaying this record in the oracle reports i want to break that test_table_dsc column like this
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb cccccccccccccccccccccccccccccccccccc dddddddddddddddddddddddddddddddddddd
i used the HTML "br" tag and set the "contain HTML tag property " to Yes
Changed the database column like the following aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa "br"
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb "br"
ccccccccccccccccccc "br"
dddddddddddddddddddddddddd
It is interpreting some other tags like bold tag "b" and underline tag "u"..But if i put the "br" tag it is not interpreting.It is just showing like that. Is there any other way to do line breaks (according the requirement)
Message was edited by:
phani marella
Message was edited by:
phani marella

Hi Phani,
I just tried with the value specified by you. Here is my report :)
I have created a report with a formula column which returns following text:
"<html><body>a bb ccc dddd< /body >< /html >" (without double quotes). And I set the field's "Contains HTML Tags" property to Yes.
And my observations are:
1. Many times I tried in paper layout, it is simply showing the HTML code, but not parsing the tags. :(
Now executed the report from browser using http://localhost:889/reports/rwservlet.....
2. If DesType=HTML, everthing is fine and I got the result as I expected. and the result is displayed below
a
bb
ccc
dddd
3. If DesType=pdf. the result is NOT as expected. And I found only bold and tags are interpreted/parse but no other html tags as specified in help. The output is:
< html >< body >a bb ccc dddd< /body >< /html >
This is same with DesType=RTF.
Conclusion:
* Full HTML tags are supported only when you run a report with DesType=HTML and ContainsHtmlTags=YES.
* When DesType is PDF and RTF only limited HTML tags are supported/parsed. Those are Text Style (bold, italics, underline, and strikethrough) and Text Attributes (font name, font color, and font size) as specified in help (you mentioned the same in above post).
* Even paper layout supports the same limited tags, but not all HTML tags.
Cheers,
Gouri Sankar

Problem with the text in my oracle report

hi
I am create an oracle 9i report which consists of some text.
While writing the text , i want to type some alaphets as the power of a a number. For example, 1 to the power of 'st' (i.e. first). Can anybody help me out.
Thanks in advance

Hi,
I don't think you'll be able to do it. It's a special effect, like Superscript in MS Work, that you can apply to a part of the text, but Oracle Reports (at least version 9.0.4.0.33 i'm working with) has only 2 of them - Strikeout and Underlying.
Regards,
Andrew Velitchko
BrainBench MVP for Oracle Developer
http://www.brainbench.com

About using cursor expressions in Oracle Reports

I've just discovered a rather old syntax of the mighty select statement. It seems related to the concept of inline view or more precisely scalar view. It's the cursor syntax in a select statement.
Example:
select d.dname
,cursor(select e.empno,e.ename,sal
from scott.emp e
where e.deptno = d.deptno)
from scott.dept d
I have two questions:
1) Performance: how is the performance of this select in comparison to standard join?
2) Usage: I've use this from sqlplus and it's ok, but can't use it on a tool like Oracle Reports. Although the select statement is correctly processed, can't display it since the datatype is Database - Unknown ...
It seems there´s no way to use cursor expressions at least if datasource is a SQL Query.
Thanks in advance ....

I think you have answered your own question: CURSOR is not something you can display.

HELP:About the OCP exam with Oracle Reports??

Hello
Can i achieve OCP with SQL exam , PL / SQL exam and oracle 9i reports exam / xml publisher exam
I'm not intrested in giving an oracle forms exam.
I'm working as an oracle reports writer on oracle applications.
Kindly guide me in the right direction with appropriate oracle links etc.
Regards
Fahad Hameed.

You can achieve "PL/SQL Developer Certified Associate" by passing "Introduction to Oracle9i SQL 1Z0-007" OR "Introduction to Oracle: SQL and PL/SQL 1Z0-001" OR "Oracle Database SQL Expert 1Z0-047".
For "Oracle Forms Developer Certified Professional", you need to pass "Oracle Forms: Build Internet Applications 1Z0-141" after getting the "PL/SQL Developer Certified Associate" certificate.
Oracle PL/SQL and Oracle Forms Developer
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=155
Oracle Certification Program - Oracle Middleware
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=140

How to Publish a report created by Oracle report builder

Hi Everyone
My colleague and I were trying to use the Oracle Reports Builder to replace our existing reports generator from our ERP system. We have already created the report in the Reports Builder from the development suite.
What we are looking for is a similar solution as the Microsoft reporting service;
1) create the company report templates
2) and then upload the template files to a location (e.g. folder on the server)
3) then all user in the company can access it by a web browser with some fields which they can enter some critiria (e.g. purchase order number).
4) then send to printer and the print out should look exactly like the template.
Unfortunately, we had very bad time on try to find out what we need and how to publish that Oracle report we created. We spent 15 hours on that but no result.
In that 15 hours we tried to setup the "Oracle report service", but at last my colleague said that wasnt what we looking for, the "Oracle report service" is for reporting the error from the application hosted on the server, not for publish the company report created by the "Oracle report bulider" .
We use Oracle Database 10g for the ERP quite a long time already. We had the Oracle Developer Setup, and the Application Server Installed.
Could someone please tell us what kind of Oracle service we are actually looking for. Any other suggestion and setup guides are also the most welcoming.
Best Regards
Bryan

Hello,
If you want to be able to execute your Reports on the web, the best solution is to use the "Oracle Application Server"
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
For example , the "Forms & Reports Services Standalone" edition
Then, use the Reports Servlet to submit the execution requests to a Reports Server :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_run.htm
Oracle® Application Server Reports Services Publishing Reports to the Web
10g Release 2 (10.1.2)
B14048-02
13 Running Report Requests
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/howto/runprint/deploy_rpt.htm
Deploying a report
Regards

Passing Parameters with a URL to an Oracle Report, on an Oracle Reports App. Server

I have built an Oracle report which resides on a Windows 4.0 / IIS application server with Oracle Reports installed.
(8i Database / 6i Developer 2000 suite). This works flawlessly when called from an Oracle Form.
My question is, how do I call the same report from portals and pass it the required parameters. Thanks!

Hi,
You will have to encode your parameter value. The problem is because of the spaces in the value. Whenever there any special
characters in the value it should be encoded.
example
select '<area shape="rect" coords="335,66,528,83" href="http://townland:7778/pls/portal30/PORTAL30.RPT_SUMKWH.show_parms?meter='||
<portal_schema>.wwutl_htf.url_encode('PMS 11BBA01')||'">pams</a>' url
from meters
The above is just an example. Please change the names to suit your requirements.
Thanks,
Sharmila

Problem about HTML reports gemerated by Oracle Report

Similar Messages

Maybe you are looking for