Problem about reading notes

i want to read longer notes with my ipod. Are there any methods so that i can still read .txt files for more then 100k without cutting them into pieces?
thx
^^

in order to view notes larger than 4k, you have to seperate them and then put them in the notes folder. there is not a way to keep them together and view them. as far as software that automatically splits it up, i couldn't find any but there probably is some out there somewhere.

Similar Messages

  • A problem about reading from serial port

    Hi,
       I just sent '0x03' from MCU to PC continuously, and then sent  '/n' as a stop character after every '0x03'. I use labview to read the data. The problem is when it get two '03' it get a '0', another two '03' and another a '0'. I don't know where is the '0' from?
      PS: Hyper terminal can display natrually.
       Thank you! 
    帖子被hengfo在08-08-2007 10:14 PM时编辑过了
    Attachments:
    serial read.vi ‏36 KB

    I think the problem may be the loop reading the serial port is running too fast.  There is no timing delay in the loop, so you are reading it as fast as you can, and probably faster than the device is sending data.  So sometimes the buffer is empty, and then the empty string gets converted to a numeric zero.  The way to know for sure is to put an indicator on the error wire coming out of the serial port read.  I bet you will see errors about the read buffer being empty.
    Put a wait timer in the loop to slow down the execution just slightly.  This is a good idea so that LV doesn't eat up all the CPU resources.  Look at the example for Basic Serial Write and Read.  You may want to have a loop ahead of the read that waits until there are a certain number of bytes at the port before it reads the serial port.  You may want to put a loop around the serial port that waits until a valid number is read in before it exits the loop and goes to the numeric conversion.
    Message Edited by Ravens Fan on 08-09-2007 08:50 AM

  • Problems about reading Japanese and writing Chinese

    Hi all experts,
    Now I have a encoding problem.
    My task is, read some Japanese in a text-based file, and then replace that Japanese with a Chinese string.
    That means, the program must be able to understand both the Japanese encoding and the Chinese encoidng. But the dilemma is that, in the OS I am using (Windows), you can only have one locale at a time. If you set your OS locale to Chinese, the program is able to write Chinese, but it cannot properly detect the Japanese. On the othe hand, if you set your OS locale to Japanese, the program is able to detect Japanese, but it cannot properly write Chinese.
    So can any one help me get around this problem (for instance, there is some special API dealing with encodings and so on)?
    Thanks a lot!

    InputStreamReader and OutputStreamWriter constructors both accept parameters to specify the encoding of the data stream.
    The New IO (NIO) classes have these and additional capabilities, including converting from one encoding to another using code like this:
    Charset charset = Charset.forName("ISO-8859-1");
    CharsetDecoder decoder = charset.newDecoder();
    CharBuffer charBuffer = decoder.decode(buffer);Look at the java.nio.charset package.

  • Problem about "Checkpoint not complete"

    Dear Friends ,
    I got the following error in my database 2 or 3 times a day . The error is :
    Current log# 1 seq# 4127 mem# 0: /dbfs/oradata/ababil/redo01.log
    Thread 1 cannot allocate new log, sequence 4128
    Checkpoint not complete
    I am using Oracle 10g database server where each redo log file size is 512 MB , and each of the file contains ONE member .
    Our production server is used in a Private BANK .
    In this moment How can I resolve this problem ?

    Hi,
    Girish, I will try to figure out and you tell me the which is best.
    Adding the Space or Size to the Existing Redo Log File Size, it will be effect the some time slack for performing the
    Checkpoint as the Case concern with OP.
    While comparing with scenario where we are adding the Extra Redo Log File, where the one extra Check point will increase in Cycle and as with respective need size/ space is increased (in terms), but the size of existence file is not changed.
    I think better to add an Extra Redo Log File, Instead of increasing the Size of present Redo log file.
    Let me know what you think... and please post your concerns and Suggestions.
    - Pavan Kumar N

  • Problem about reading sms

    Using PCSUITE i can store my sms (of my mobile) on my computer.
    But they arent in a text format.
    Is it possible to convert each sms file in a format which can be read by Word o Blocnotes?
    I mean, id like to read my sms without always using PCSUITE.
    Thankyou.

    in order to view notes larger than 4k, you have to seperate them and then put them in the notes folder. there is not a way to keep them together and view them. as far as software that automatically splits it up, i couldn't find any but there probably is some out there somewhere.

  • Question about reading hex data

    Hello! I am a Labview Novice and having a problem about reading hex data.
    Basically I am having bytes from the serial port like this: "80100E0E0AB4F646F24A00911267087E032080057FFF "
    It is not encoded in ASCII. What I want to do is to convert the hex to an ASCII hex string.
    so that the string would become hex numbers in ASCII.
    I think the following might be a solution, but I have no idea what the subvi is in the solution.
    http://forums.ni.com/t5/LabVIEW/Hex-String-to-Ascii-Hex-String/m-p/886078/highlight/true#M400462
    Thanks in advance and I appreciate your kind help!
    Solved!
    Go to Solution.

    coolmatthew wrote:
    What I want to do is actually this.
    You are using way too much code for all this. All you need is a concatenate strings, replacing your entire loop and such. Same result.
    (see also)
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    HEXTwiddler.png ‏4 KB

  • When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

    When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

    iOS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • Problems getting Reader (9.4 and up) to interact with WSDL, rights-enabled or not

    Somehow I must be doing something wrong - My form works just fine in Designer,
    Preview, Acrobat Pro, etc as expected. When I open the form in Reader, I am not gett
    ing my data back. I have rights-enabled the form, still no go. Am I mis
    sing something? Any suggestions appreciated!

    Thanks - Adobe is certainly misleading about what & where they are calling
    Reader Extension. Grrr.  Thanks so much for your answer!
    Tabi Freedman
    Developer
    BTS-PAS
    P. 212-919-3135  M. 917-370-7229
    7 Hanover Square H-4-A, New York, NY 10004
    The Guardian Life Insurance Company of America
    GuardianLife.com
    From:   pguerett <[email protected]>
    To:     Tabi M Freedman <[email protected]>
    Date:   07/29/2011 01:42 PM
    Subject:        Problems getting Reader
    (9.4 and up) to interact with WSDL, rights-enabled or not
    Thats your issue .....Acrobat does not add the right to enabe Web Services
    in Reader. That can only be done via LiveCycle Reader Extensions.
    Paul

  • Good am sir i have an problem about may hp touchpad i just update it for android but i am not succes

    good am sir i have an problem about may hp touchpad i just update it for android but i am not success to install it what can i do for it
    This question was solved.
    View Solution.

    Installing another Operating System to your Touchpad is an option with inherent risk, and is not supported here on this Forum.
    Try researching your issue over at http://www.webosnation.com.  They have an entire forum section devoted to "Android on the HP TouchPad".
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

    Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
    This is a new problem and was not the case before.

    Works perfectly fine for me with the latest Reader version (11.0.09).
    You write that it worked "before"; before what?  An update?  Update from what version to what version?

  • We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

    We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

    Sounds like it's a problem with the Acrobat settings. Did you set them to the same resolution?

  • Problem with Adobe Reader not being able to run with Maverick  10.9.2?

    problem with Adobe Reader not being able to run with Maverick  10.9.2?

    Have you updated your version of Adobe Reader?

  • Time Machine not backing up.  Very slow, essentially hanging.  I have 10.7.5 Mac OS X Lion (11G63).  I have put in all updates.  I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem).  Still not working.

    Time Machine not backing up.  Very slow, essentially hanging.  I have 10.7.5 Mac OS X Lion (11G63).  I have put in all updates.  I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem).  Still not working.
    Thanks in advance for any help! 

    For all things Time Machine see Pondini's excellent information here...
    http://pondini.org/OSX/Home.html
    Start at Troubleshooting.

  • Adobe reader not responding after uninstall , reinstall, etc. recent problem

    I try to open a pdf file and I get the "Adobe Reader Not Responding" result and can go no further.
    Have uninstalled Adobe, reinstalled, run scans.
    Windows Vista
    This problem is recent - I would say in the last few months.

    Try this:
    http://labs.adobe.com/downloads/acrobatcleaner.html

  • I just downloaded the new Firefox 4, rebooted, and viewed you videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

    I just downloaded the new Firefox 4, rebooted, and viewed your videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

    The Firefox icon is the default feature for Windows Vista and 7 only, it does not apply to Windows XP users.
    To have the Firefox icon instead of the Menu Bar:
    View > Toolbars and UNCHECK the Menu Bar.
    After that, click on the Firefox icon and you'll have the Menu Bar appear again.
    http://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing

Maybe you are looking for