Problem configuring PC Suite - "There is no availa...

Hi
I've just changed from an ancient Nokia 7110e (using Fonesync 4 on my Windows/XP laptop and built in infrared link)to a 7250i.
I downloaded PCSuite 6.6.18 from the Nokia website and installed it without apparent problems. However the "Get Connected" wizard exits with the above message and "Failed to detect available connection types! Please reinstall Nokia PC Suite".
Nokia Connection Manager produces "Cannot use the media modules. Please reinstall Nokia PC Suite (Code:MMListEmpty)".
I've deinstalled and reinstall a large number of times both from the "Uninstall option" and from WIndows settings. I've downloaded and run (several times) Nokia PC Suite Cleaner 3.1 (and tried all of the settings!). I've deinstalled FOnesync and rebooted. I've tried registering the IR .dll using regserv32 (as suggested elsewhere). I've even tried installing on a desktop PC also running XP Pro SP1 - but this produced exactly the same result.
I'm now out of ideas. Can anyone suggest other avenues to explore? Please! (I should adde that the IR port on my IBM Thinkpad T41 works fine and detects the phone. It worked perfectly with Fonesync 4.0)

Hello everyone,
For the life of me I can not figure out what went wrong here. This all worked before. Ive tried everything I can think of and alot of the solutions on the forums but they either dont work or dont seem to be applicable. The software says no connection types available.
Technical Info:
I am running windows XP SP3, and PC Suite version 6.86.9.3.
Trying to connect using bluetooth.
Phone is a Nokia 6133
Phone bluetooth settings:
Bluetooth = ON
Phone Visibility = show to all
===================================================================
Steps taken:
1. Pair the phone with PC, Pairs fine
2. Open the PC Suite software and try to establish a connection
It keeps displaying a window that says "problems with infrared connection", which I am not using. Im trying to use bluetooth. I close that window and behind it is another window that says "Get Connected" and has some option selections of Cable Connection, Infrared Connection and bluetooth connection, **ALL OF THEM* are grayed out and unselectable.
As a side note im now realizing this is a new problem after uninstalling the software, deleteing all the registry key's and then re-installing.
But like I said, I dont understand why there is even a problem, this all worked fine 3 weeks ago when I last used it. The only possible thing I can think that might have changes is there have been a few Microsoft updates.

Similar Messages

PC Suite - there is no available connection type

OK,
I'm running XP SP2 on an IBM t30 laptop. Looking to have all 3 connection methods available. Bluetooth is Widcomm 3.0.x and PC Suite version is 6.8.22.
Initially installed PC Suite fine, but had problems with getting bluetooth connection (IRComm and Cable were fine). Read that best way round this was the reinstall after doing some fiddling with the bluetooth setup. Duly reinstalled, only now I get error when I start the connection manager or manage connections. either "there is no available connection type" for the first or "connection to PC suite failed code:Init IMediaControl2".
In order to try and deal with this I have, Uninstalled and reinstalled the app. Uninstalled the app and run the PC Suite cleanup tool 3.3 reinstalled the app. Uninstalled the app, run PC suite cleanup, removed all nokia keys from the registry, run cleanup again and reinstalled. The problem persists, my patience does not.
Help?
Dom

My experience may also be relevant, and since it took me two whole days to remedy it (call me slow, but I'm persistent), I'll share it. I too stopped being able to get a Bluetooth connection in PC Suite, even though the PC could see the phone (6230) in Bluetooth settings and I could see some of the folders on the phone.
I uninstalled and reinstalled PC Suite countless times, did all the spring cleaning I was told to do, nothing. So I thought maybe there is a problem with the Bluetooth stack.
I have a Dell Inspiron 6000, which uses Bluetooth stuff from Toshiba, so I went to their site, http://aps.toshiba-tro.de/bluetooth/. It said to check out Device Manager, and, what do you know, all the Toshiba Bluetooth drivers were missing. I have no idea how, but anyway, I downloaded a new stack at http://aps.toshiba-tro.de/bluetooth/pages/download.php
I installed it, cross my fingers, prayed to the Bluetooth Fairy, and YES YES YES! It works. The end.

Problem configuring SOA suite to use OID for authentication

We are in the process of rebuilding our environment to use the full SOA suite with our OID server for authentication (was previously just BPEL using AD directly), and have encountered several problems (below). We have rebuilt the OID server, and reinstalled the SOA suite into a clean ORACLE_HOME to no avail.
We first rebuilt the OID server using the following steps (derived from Oracle® Internet Directory Administrator's Guide):
1)     Create the Import and Export profiles for AD synchronization. We did this using the Directory Integration and Provisioning Server Administration tool under “Active Directory Configuration”
2)     Modify the map file to specify the correct OU mappings between AD and OID.
3)     Update the profile with the new map file using “dipassistant.bat mp”
4)     Bootstrap the import profile using “dipassistant.bat bootstrap”
5)     Start a new instance of the Integration server (odisrv) running on config set 1 (the config set containing the Active Directory import/export profiles) using “oidctl”
6)     Set the Import profile to Enable. The OID server does not export changes to AD in our current configuration, so the Export profile is left on disable (and not bootstrapped)
At this point it appears that the AD synchronizes correctly into our new OID server.
Next we installed the SOA suite:
1)     We ran “irca.bat” on our database server to create the ORABPEL, ORAESB, and ORAWSM schemas and associated integration repository structure.
2)     After launching the SOA suite installer, we selected Advanced Install.
3)     On the next screen, we selected J2EE Server, Web Server, and SOA Suite.
4)     We then provided the credentials for our Oracle database, and the passwords for ORABPEL, ORAESB, and ORAWSM.
5)     We configured our new AS instance as an administration instance, but did not opt to use from a separate HTTP server, and did not make this instance part of an OAS cluster topology.
And finally, we configured our new SOA suite instance to use OID for authentication (using the instructions in Oracle® BPEL Process Manager Administrator's Guide section 2.1.3):
1)     Used the configure_oid.bat command to seed OID with required users only.
2)     Logged into the OracleAS Control Console
3)     Chose the oc4j_soa instance, then Administration->Security->Identity Management
4)     Configured the OID server using a non-ssl connection and the cn=orcladmin account.
5)     When prompted, chose to reconfigure all applications in the oc4j_soa instance to OID, but not to use SSO for any of them.
6)     Copied the contents of ORACLE_HOME\j2ee\home\config\jazn.xml to ORACLE_HOME\j2ee\oc4j_soa\config\jazn.xml
7)     Restarted the application server.
After this procedure, we encountered the following issues:
1)     The BPEL console appears to authenticate users correctly out of OID, but no users have access to the default domain, including bpeladmin and oc4jadmin. All users receive a similar access denied message when attempting to log into the BPEL Admin Console.
2)     We cannot upload a BPEL process to our new server via JDeveloper’s standard BPEL deployment mechanisms. The connection appears to be working properly and passes all tests, but on uploading a process we get a Java AccessDeniedException. ESB appears to be functioning properly, and accepts uploaded projects without issue.

Bassman,
We recently configured our SOA Suite to use OID and SSO. We had the same issues you are having, and we found the resolutions in a blog from Jaas Poot (http://blog.jpoot.com/category/oracle-appserver/oid-ldap/). For the BPEL domain access, this involved going to the data-sources.xml file and changing the database passwords from using ->pwForOrabpel for the orabpel schema and ->pwForOraesb for the oraesb schema to the real passwords; the blog explains more about this.
The blog also covers the JDeveloper deployment issue, and another issue we encountered, where we couldn't access the BPEL Admin console. All of these were resolved following the steps in the blog.
Hope this helps
Candace

Fresh install of trial version of Captivate 8 on OS X 10.9.3 - no previous version of Captivate on machine. I've got lots of crashing to desktop problems right off the bat. Is there a patch available?

Fresh install of trial version of Captivate 8 on OS X 10.9.3 - no previous version of Captivate on machine. I've got lots of crashing to desktop problems right off the bat. Is there a patch available? I work at a University and we're evaluating for online courseware - my last experience with Captivate was 5.0. Anyone else experience this with the trial download?

Hi there,
There is no difference in terms of usage and features between a trial version and a licensed version.
Could you tell me do you get any specific error message when it crashes, or does it crash while using a particular feature, or is it random?
Can you also try with a different user account (admin) on your MAC, check if it behaves same there?
Thanks.

Problem Installing Developer Suite on WIndows Vista

Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!

Which developer suite are you using???

Image transfer problem 6680 pc suite

Hi,
I'm trying to transfer images from my phone to the pc using pc suite. But when i select every images on the phone and drag and drop them to the pc, then a folder is created, called for instance "PB3CEA.tmp" with no images in it.
When i only select a few it does the job without any problem. I connect by cable.
Is there something to do about it ?
configuration :
Pc Suite 6.81.13.0
Nokia 6680 fully up to date
Windows XP SP2 also up to date
Thanks folks !
Terence

In fact i was using the "file manager" when this thing happened, but i retrieved my files using "transfer images".
I know this is awkward, i don't understand it either...
Thanks for your help !
Terence

Updating problems wit Nokia Suite 3.2.100

Hi people.
My current firmware on the phone is: 200.21.012, RM-450, Nokia E63-3 (253.05)
Nokia Suite tells me there is an update for this phone but when i get to the stage of: 'Preparing to download'
It says:
Something's gone wrong.
There was a problem with Nokia suite. Please restart the program and try again. If the problem doesn't go away, uinstall Nokia Suite and download the latest version of the app from www.nokia.com/ovisuite. Error code: 12017
Anyway this is the latest version (currently available)
I have uninstalled it throughly removing EVERYTHING containing to word 'Nokia' from the registry.
Yet still i am getting this error.
Have already tried this method too:
http://europe.nokia.com/search?qt=12017&np=other,products,services&cat=support&fullcontent=true&cnt=...
No luck!
Is anyone able to help me?
Thanks.

I finally have had my e63-3 RM450 product code (0583677 - Three Network Australia) updated from 200.21.012 (253.05) to system 411.21.001 (253.07). This was done at the Nokia Care Centre in Melbourne under warranty .
I was unable to upgrade using Nokia Suite 3.2 - even though it identified the correct 411.21.001 update as required. Nokia Suite mis-identified the phone as an RM-437 rather than an RM-450. I supplied the logs to Nokia Suite feedback and noted that I had SIM unlocked the phone from the Three Network. Nokia Suite feedback's response was to accuse me of flashing the phone with a new product code as part of the unlocking process - thus causing Nokia Suite to confuse the RM450 with a RM 437. In response I advised them that the phone had been unlocked using a code supplied by the Network operator Three/Vodafone Australia. I then attended the Nokia Care Centre in Melbourne to ensure that the phone carried the product code on the sticker - which it did. I provided the Nokia Care Centre with the email correspondence with Nokia Suite Feedback and the Melbourne team agreed to update the software under warranty.
There are later software updates available for the Nokia e63-3 - but these do not yet have Three/Vodafone Australia authorisation. That is an argument to take up with the Network owner who controls the authorisation of firmware updates for product code 0583677.
I note that the latest Nokia Suite 3.3.86 still misidentifies the phone as an RM437 instead of an RM 450.
On a final note - once updated to 411.21.001 - Skype would no longer automatically install from the website - it simply said Skype was not available for this handset. However, manual installation of Skype 1.5 was possible using the non-touch version for Symbian and works well.
Nokia Suite continues to have a problem with this model of phone.
For the record and anyone else who has this problem.
rsw65

I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that

I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?

Dear Katty,
Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
https://discussions.apple.com/thread/3374419?start=0&tstart=0
https://discussions.apple.com/message/16628399#16628399
Do you have an idea of how can I solve this problem?
Thank you very much again.
Best regards,
Alfonso

Problems configuring HP Laserjet M1213nf MFP with Mac via AirPrint

Hello,
I have a HP Laserjet M1213nf MFP printer, connected to a Dlink DSL-2730U ADSL router. I am having problems configuring the printer with my Macbook running OSX Yosemite. I can see the printers name in nearby printers but when I try to add the printer, the mac gives me an error saying, "unable to communicate with the printer at this time". The network settings on the printer are configure for iPv4 and iPv6 addresses.
Previously, I had the ADSL DSL-2750U model router, and the printer was connected fine. I did not face any issues then. I have been facing problems since I changed my router so the problem should be in the router. I have the IP for the printer reserved in the DHCP reservation list on the router settings using the mac address of the printer.
Can someone please help me out here? Is there something I am probably missing.
Rgds
~n~

I talked to the DLink Support. They asked me to disable an option called "MultiAP Isolation" and Voila, the printer is working fine. I can add it to all my devices on the wireless network. I looked up google. Apparently, this isolation feature present in some routers, prevent wifi clients to interact with other devices connected to the wired network and also with each other. Thats why only my desktop which was also connected wired was only able to access the printer and not the laptops connected wirelessly.
Problem solved. Thanks for all your help on this one.
Cheers!

I have upgraded to Lion Os but my Network storage (Iomega Home Media Network hard drive) does not work with Time Machine. Are there any solution available?

I have upgraded to Lion OS only to find that my NAS (Iomega Home Media Network hard drive) does not work. It tells me that it is not configured. Are there any solutions . Have Iomega sorted out the problem?

Same issue here. Based on what I can tell, iomega still has not developed a solution to the problem. See below:
https://iomega-na-en.custhelp.com/app/answers/detail/a_id/28327/kw/Mac%20OS%20X% 20Lion

ITunes - App Store - There are updates available that ain't available?

First of all, I'm starting to think that the iPhone ***** big time, but that's a whole other story...
So, here's my issue: Apparently there are updates to my applications available. So says iTunes and also the App Store app on the iPhone, both of them reporting the same number of apps available.
I'm quite sure that there was a button to "update all" on the iPhone on 2.0.1 and 2.0, but that seems to be missing? (but not the point anyway)
Then, in iTunes, the applications view tells me that there are updates available. When I click that link on the lower right that usually redirects to the update page, iTunes tells me that there are no updates available for my account?!
How can that be? Either there are or there ain't.
Is there a way to fix that problem? I would have updated the applications trough the iPhone, but as there are many (44) and I would have do update them one-by-one, I'd like to go an easier way...
I'm really patient, but I start to hate my iPhone. As it is now, it is just a ******* expensive piece of junk. :-((

I have fixed a similar issue in my iTunes. Here is my thoughts on why it happened and the fix.
I had recently added a second computer w/ iTunes with which my iPhone is now synching. I wanted to move my music library synching from work to home.
On the 1st PC (@ Work) I was synching:
Info, Contacts
Info, Calendar
Ringtones
Music
Podcasts
Video
Applications
On the 2nd PC (@ Home) I began synching:
Ringtones
Music
Video
Applications (this nicely caused all of my iPhone Applications to be copied to this PC, in case of a need for a restore from home)
After beginning synching on the 2nd PC (@ Home), I disabled synching on 1st PC of:
Ringtones
Music
Video
Applications (This apparently caused the issue)
The issue with phantom updates was showing up on the 1st PC (@ Work), but I was not synching Applications here. Apparently, I had updated some Applications from the 2nd PC (@ Home) and iTunes detected this and saw a need to show that my iTunes Applications needed updating. Something not in synch between iPhone - iTunes - App Store I believe.
The Fix:
On the 1st PC (@ Work) I enabled synching of Applications and then performed a synch. The phantom updates went away. I noted during the synch that my iPhone apparently updated some of the applications in my iTunes library.
I hope this helps or enlightens others having this difficulty.

Hello I suffer from a problem with your MacBook There is a black line in screen

Hello
I suffer from a problem with your MacBook
There is a black line in screen
http://i48.tinypic.com/35apzz8.png

Is the line always present? If you boot up the MacBook holding down the option key during startup so that you get to the startup manager, is the line still there?
If so you have a hardware issue and it needs to be repaired. Contact Apple using their Express Lane if you live in a country where that is available, or call the appropriate phone number on this page if not. You can also take the MacBook in to an Apple store or service provider.
Best of luck.

Is there a script available for 'live' endnotes in Indesign 5.5?

I want to export books to epub with live endnotes (1,2,3,4,) displayed chapter by chapter at the end of the ebook. There are usually around 10 chapters and 700 notes. How can this be done? I have ongoing books to do like this, so I need an automated solution, is there a script available to do this?. Until now (for non epub books) I have been importing text from word, stripping the notes, and organising ‘dead’ notes, at the end of the book. What is the best way to import word files and keep dynamic links alive in the epub? Thanks a lot for your help.

InDesign doesn't support any endnote scheme at all, so all you could do is create hyperlinks to and from the note.
The same answer for your index query, actually, although there you are going to run into another problem: there is no way the page numbers in the index are going to "update" live as the user resizes his screen, toggles the font, changes the font size etc.

Kerberos Configuration Manager for SQL Server is available

This thread describes the Microsoft Kerberos Configuration Manager diagnostic tool for SQL Server. This tool is available for download from the Microsoft Download Center:
Download the package now.
About Kerberos Configuration Manager
The Kerberos Configuration Manager for SQL Server is a diagnostic tool that helps troubleshoot Kerberos related connectivity issues with SQL Server, SQL Server Reporting Services (SSRS), and SQL Server Analysis Services (SSAS). It can perform the following
functions:
Collect information on operating systems and Microsoft SQL Server instances that are installed on a server.
Report on all Service Principal Name (SPN) and delegation configurations on the server.
Identify potential problems in SPNs and delegations.
Fix potential SPN problems.
More information
This tools helps troubleshoot the following exceptions:
401
Note: This error message is for http errors, SSRS errors, and some other similar errors.
Login failed for user 'NTAUTHORITY\ANONYMOUS'
Login failed for user '(null)'
Login failed for user ''
Cannot generate SSPI Context
For more information about Kerberos Configuration Manager, go to the following related blogs:
Released: Kerberos Configuration Manager for SQL Server
Kerberos Configuration Manager updated for Reporting Services
Kerberos Configuration Manager updated for Analysis Services and SQL Server 2014
Reference from the following KB article: Kerberos Configuration Manager for SQL Server is available
Elvis Long
TechNet Community Support

Thanks for posting, Elvis. Can you post this to the SQL Security forum too?
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Is there a template available for a credit card authorization form?

Is there a template available for a credit card authorization form? (Something professional looking along the lines "I authorize a one time payment in the amount of...select Mastercard, Amex...billing addresss...3 digit code...) Thanks

There probably is, but before you go to far with a PDF form for such information you need to consider how it is to be used.
E-mail is a definite no. Even standard web submission is not acceptable. You would want to submit to a secure web site. If that is the case, it might be better to just use standard HTML processes, but at least https is a needed protocol for things such as credit cards and other personal information. I always look for "https" on line and would probably refuse to use a PDF form that asked for my credit card because of a concern about proper handling. Messing this up could lead to a big law suit against you, suggesting why so many firms just use a payment service.

Problem configuring PC Suite - "There is no availa...

Similar Messages

Maybe you are looking for