Problem connecting Curve 8330 through Bluetooth

The Curve and my Asus running Windows XP Pro "see" each other, the BlackBerry reports a connection, but Windows always informs me that the set-up failed and the desktop manager does not recognize the Curve.
In the desktop manager, the option for enabling a Bluetooth connection is greyed out and unaccessible.
Can anybody help me here?
Thanks

Thanks urumilton, I found that article in the meantime. Now my question would be: Where can I get the generic Windows driver stack?
I uninstalled the Toshiba Bluetooth driver stack on my system and restarted, hoping Windows would find the generic driver. Unfortunately it just re-installed the Toshiba driver.
I also tried uninstalling Toshiba and installing the WIDCOMM stack, but that does not work either.
I have been reading this string
http://www.blackberryforums.com/bluetooth-connection/28166-how-use-native-bluetooth-drivers-most-blu...
but neither of the problems seem to closely resemble mine, since I am not using a dongle but the on board BT of my Asus U6S.
Any further ideas?
Thanks!

Similar Messages

  • Macbook pro connects to iphone through bluetooth but can't access the internet

    Hello, I have a macbook pro 10.6 and an iphone 3gs 4.3.3. I used to be able to connect the macbook to the iphone through bluetooth using personal hotspot and access the internet but one day it just stopped working. I have tried turning them off and on, disconnecting bluetooth etc but nothing has worked so far. I have tried connecting my iphone to my ipad2 through bluetooth, it works great. The iphone to the macbook through usb and it works great as well. I have tried connecting another iphone to my macbook through bluetooth and it doesn't work. The bluetooth on my macbook seems to be the problem
    Well, to be more precise, the macbook sees the iphones, connects to them through bluetooth, the blue bar appears on the iphones screens but the computer wont access the internet.
    Any idea?
    Thank you very much.

    SUCCESS!!!!!
    I visited my brother-in-law yesterday and attempted to connect with his secure network. By sheer luck, he is using the exact same model LinkSys router. My iPhone connected first time--so the iPhone was eliminated as a source of the problem.
    I didn't do a lot of troubleshooting at his house, but I did notice that his network was set for both dynamic DHCP and dynamic DNS. I know that either or both of Windstream (my ISP) and my broadband modem requires a pair of static DNS addresses.
    Sure enough, delving real deep into Windstream's support site, I discovered a LinkSys router DNS help page, specifying how to set static DNS addresses in LinkSys routers. I then accessed my router, enterd the known static addresses, saved the router settings, then rebooted the iPhone and connected to the network.
    SUCCESS!!!
    Thanks to Jane, who suggested it was an ISP issue, Jason, and all at Apple support. dumonj, I'll email you directly. Try this suggestion and see if it helps.

  • How do you get iPhone 5 to connect to iMac through bluetooth?

    How do you get iPhone 5 to connect to iMac through bluetooth?
    I know the basic steps, but all I get is pairing unsuccessful. I'm using an older bluetooth, would that make a difference? I got connected once with a Motorola bluetooth, but can't reconnect. TIA!

    Try the Bluetooth Troubleshooting steps here:
    http://support.apple.com/kb/TS2756
    Note that you need to have Personal Hotspot set up with your carrier and on your iPhone before you can connect the computer.
    Regards.

  • Problems connecting curve 9380 to mercedes bluetooth sap v2

    Hi everyone, i have just got this phone in the hope that as it has SAP on it that it would connect to my Mercedes Bluetooth cradle.
    I have managed to get it to connect but it then disconnects then keeps connecting and disconnecting again but not actually working in the car as it doesn't stay connected for long enough. Anyone know why it would keep doing this and how to get it to connect and stay connected?

    I have the same phone, and exactly the same problem! Keeps dropping the connection. My service provider suggested reloading the phone software. But no luck... I am at wit's end. Any luck that side yet?

  • Since upgrading to iOs 7.0.5, my iPhone 5S no longer connects to anything through Bluetooth, even things it was previously paired to. Any ideas?

    Under the previous version of iOs 7, I could connect to 2 sets of headphones, and a van through bluetooth with no problems. Since the update, nothing connects, even though the iPhone can see the items. I have tried “forgetting” the devices and tried repairing them with no success.
    I would contact Apple about this, but every time I tried with other problems their response was “Try waithing for the next upgrade”.
    Anyone out there having the same problems, or know of any solutions?

    I got the same issue with my Garmin Watch.
    Since I've upgraded my iPhone 5s from 7.0.4 to 7.0.5 I can't perform the pairing.
    I've tried with an iPhone 5 on 7.0.4 and everything works as expected, but not with 7.0.5. I have a message who says "Pairing Unsuccessful, Pairing took too long. Make sur "tactix-xxxxx" is turned on, in range, and is ready to pair".
    As I said, I don't have this message with 7.0.4.
    I've performed all tips to try to resolve the bluetooth issue on my iPhone, in vain
    Please help !

  • HT201269 I am having problem connecting my iphone 4 Bluetooth with my Sony Viao Net Book and other iphones or other bluethooth enabled devices.

    Having problem connecting my IPHONE 4 with my Sony Viao Net Book and other Bluetooth enabled Devices and would also need information about Syncing.

    Have a look here for Supported Bluetooth Profiles
    http://support.apple.com/kb/HT3647
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/

  • HT201205 Trouble connecting other tablets through Bluetooth from iPad mini

    I Am facing problem in connecting other tablets using Bluetooth in my iPad mini

    There apps like the following that allow some BG connectivity but only to another iOS device:
    https://itunes.apple.com/us/app/id590369016?mt=8

  • Connecting iPhone 4 through Bluetooth

    TouchSmart won't connect with iPhone 4 through Bluetooth.  "No driver found."  Is this an HP or iPhone issue?

    Please provide the full model name and/or product number of the HP computer in question. Without this information we are unable to answer question or solve your issue.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Camera Problem with Curve 8330

    Hi - I have a Curve 8330 and the camera has recently started acting strange. When I look at the screen to take a picture, the image is "posterized" (ie, it looks like an Andy Warhol poster, with strange colors).
    I can find no setting to fix this...I have also tried both a hard and soft reboot, with no luck.
    When I take a picture while looking at the "posterized" screen image, it does not save it, even though I have plenty of file space left.
    Help! :-)

    I am having the same issue as well (and done the same things), and have not been able to find anything either.  I am not sure if this is now a hardware issue and not a software issue.

  • 1.Not able to connect other iPhones through bluetooth

    Hi,
    1. Bluetooth is not working for me in iPhone 5. Not able to connect even other iPhone through my bluetooth.
    2. Wifi not working properly sometimes. Example If i connect my mobile with the wifi network it was connected first, then i disconnect the Wifi modem after that i switch on the modem then connect the wifi it is searching long time.
    3.Camera- I took a snap with Flash mode (ON) in the very dark area.The photo dispays full of white color.

    This is not supported by the bluetooth profile http://support.apple.com/kb/ht3647

  • Problems connecting to internet via bluetooth from...

    I am trying to connect to the internet from my Mac PowerBook using my Nokia 5300. The phone pairs nicely and sets up but when I press "Join network on Nokai 5300" which should connect me to the Internet, the computer connects briefly to the phone after which it disconnects and a message saying : Bluetooth network failed. Your device unexpectedly disconnected. Make sure it is turned on and in range." appears. I have tried the same thing with other 5300 phones and this process worked nicely. What could be the problem? Something in settings or maybe something is wrong with my phone?

    As I understand it, if you have MacOS X 10.4.9 or later, it just works! It is a Mac after all.
    You need to make sure that the phone itself is connected to the appropriate mobile internet account. On my Australian 3 mobile that profile is called "Mobile Internet". Your network provider should be able to help with this. Once that is set you should be able to browse anywhere on the internet with the phone.
    Then just pair the phone with the Mac in the usual Bluetooth way. Use bluetooth preferences to check the services available in the phone. You need to see, "PAN Network Access Point" in the list. Your Bluetooth menu bar menu should now contain "Join Network on NameOfYourPhone" Select that and you are connected.
    If you check System Preferences -> Network you will see that a new ethernet port has appeared which unfortunately has nothing to show that it belongs to the phone. There will also be a dial up port with the name of the phone.
    SNAFUs when I first set this up it dropped out after a few seconds. Like all things computer, a restart on the Mac and turning Bluetooth on the phone on and off a few times solved the problem.
    A PAN network access point is like a WiFi access point except it uses Bluetooth and it is simpler.
    Bill

  • Problems connecting to internet through airport extreme

    Hi everyone I am tyring to connect to the internet. I have Charter Digital at the highest speed. When I connect directly through the cable modem using DHCP i can connect to the internet just fine, but when I use the Airport using assing multiple IP addresses i cannot get the internet. When I run diagonostics, Everything works fine up to ISP after that (internet, Server) cannot connect. I've read through the boards and found nothing, so I could really use some help. I have the CAT 5 cable from the modem going to the WAN plug in the Airport.
    Thanks for any help you can give

    Thank you - some of the materials linked to that may have helped isolate my problem. Unfortunately, nothing's solved it yet. Pinging the Apple IP address gives me: No route to Host, with 100% packet loss on all attempts. I'm using an Airport Express card in a 1GHz G4 eMac running OSX 10.3.9, trying to connect to a Linksys BEFCMUH4 wireless broadband gateway modem/router. As stated above, all 4 ethernet ports are functioning correctly. All initial diagnostics on my end show there's a connection. Further diagnostics and attempts to get online show a lack of a connection but don't give any detail as to where it's encountering difficulty (or, if a traceroute shows something I'm not qualified to decipher it). It's even told me it's unable to configure succesfully. I've made sure the router itself is configured so there is no password necessary (it checks for an automatically logged number from my computer) and it shouldn't be locking me out from there (I hope). I was told running Airport Express with a non-Airport wireless router would be fine, but is it possible I was misinformed? The setup procedures available to help facilitate this all assume there's an Apple AirPort to search for and don't turn up my current router when they scan, leaving me with nothing to select from in that stage of the setup, and thus I cannot proceed. Am I doomed? Are there any gracious, exceedingly capable souls out there with the time and expertise to assist me? I'll be very grateful if someone can get me past this hurdle (I need to go wireless so I can get my air conditioner installed).

  • Mountain lion problems connecting to tv through receiver

    Things start out fine - I power up the Mac Mini, it sees my Vizio TV through my Pioneer VSX 1022-K receiver no problem (HDMI all the way through).
    I turn off the tv for a while, and come back and turn the TV back on.
    I see one of four things:
    Sometimes, it still works fine (but not very often).
    "No signal" on the TV.  Power off and on the TV and receiver in every combiniation ever, still no luck.
    Blue screen, this is rare, but sometimes it's just a blue screen.  I can't do anything though with a mouse or keyboard.
    White noise.  Again, I can't do a thing.  This is also rare.
    When 2-4 happens, I also lose the ability to VNC into the mac mini using Real VNC from Windows (it just stays at "connecting...").  In Mountain Lion, without this problem, I VNC right in in less than a second (after entering the PW, of course). 
    Sleep is disabled, screensaver is disabled. As I said, it's random; sometimes it's fine, other times it's broken.
    The ONLY fix when this happens is to hard power off and turn it back on.  Obviously not what I am wanting to do with my brand new mac mini.  I am about to throw this thing against a wall, or maybe return it, lol.
    With Lion, this did not happen (although I had plenty of other problems).
    I do not think it has to do with sleeping, because sleeping is disabled...  So what else could be the issue?   I've heard EDID issues, but I have no clue where to begin to fix that. 
    APPLE - PLEASE FIX YOUR BUG AND HELP.
    More people with this problem here: http://forums.plexapp.com/index.php/topic/44944-2011-mac-mini-on-mountain-lion-f reezing-when-attached-displays-are-power-cycled/
    Thanks.

    If your Vizio has audio return capability via HDMI, you could do it that way...although I'm not sure it would pass anything more than 2-channel stereo from the TV back to the receiver.  It's not a feature that my TV is capable of, so I can't speak to its real-life application.
    If your TV doesn't support ARC, you can buy a TOSlink cable to run digital audio from your mini to your receiver.  Check monoprice for some good deals on those cables.  I got one for less than five bucks. 
    It's a bit of a dance, but you would need to switch your audio output between HDMI (when you want the audio to come out of your TV) and TOSlink (when you want it to go to your receiver).  There are applescripts that can automate this so that you just double-click a link and it performs the switch.  I am running this exact setup in my house for the times when I want to watch a movie but everyone's asleep so I can't run my receiver.

  • Mavericks Bluetooth unable to connect to Internet through Bluetooth pan

    Im trying to connect my MacBookPro running Mavericks to the Internet through a personal hotspot on my iPhone.  This works fine with my wife's MBP running Mountain Lion, but I can't get a connection to the Internet. Diagnostics shows that I have a good connection to the phone and ISP, but Internet and server are red.
    Any suggestions?
    Thanks,
    Mike

    Yes but not to app world, just turn on wifi and set up
    Pearl 9105 6.0 Bundle 2950
    Playbook 2.1.0.1032

  • Problem of "sending failed" through bluetooth in ...

    Hi,
    I am getting a strange problem in my nokia 5700 xpress music edition.I am unable to send images or songs via bluetooth ,and getting message :"sending failed".However i am able to recieve files but not able to send files.
    Can u please tell me what should be the solution for this????
    Help required urgently...
    Thanx in advance....
    Shweta(India)

    You can try sending feedback here, not that it will do much good > http://www.apple.com/feedback/iphone.html

Maybe you are looking for