Problem creating an SMBusBlockRead function with 8451

HI !
I'm trying to programm some routines to talk to a bq20z80 from Texas Instruments who has a SMBus protocol based on a physical I2C interface. For that, I'm using Labview 8.20 with a 8451 USB-to-I2C interface.
I allready made the read word and write word functions and they do well. Problems did appear since I wanted to make the SMBus BLOCK READ routine. The figured showed below (taken from this URL : http://www.ijme.us/issues/spring%202002/articles/siung.htm) represents what a SMBus BLOCK READ signifies :
One of the big difference between a SMBus Block Read and an SMBus Read Word is shown in the red square on the previous picture. Indeed, after you send the command to ask the slave to send a block of Bytes to the master (in this case the command is 0x0045), the slave will first tell the master how many bytes he'll send to him, before he does it. So we know that the fisrt returned value will be 1 Byte (value between 0 and 255, the number of bytes that will be returned). This answer has to go to the next I2C read script who needs to know how many bytes the master will have to receive from the slave.
So shortly said, the master has to do 2 consequent reads without start/stop bit or adresse write. As the attached VI is the most logical maner for me to do it, it doesn't work and I receive an error message : "NI-845x : The Slave did not acknowledge a data byte transmitted by the I2C Master". On the Front pannel of the programm, I can see that the first byte has been correctly received (the number 11), but no data could be transmitted afterwards.
N.B. As I know that the number of bytes to be read is 11, on the VI that a constant that is fixed at the entry of the second Read I2C Block.
Thanks a lot in advance for your answers,
Yves
Message Edité par newbieLBW le 11-09-2006 08:42 AM
Attachments:
smbus_Read_Block.vi ‏34 KB

Hi Yves,
We discussed your problem with colleagues from R&D and we found this solution:
"Well the VI looks good, but it seems you have to break the script in order to avoid the error you got.
See
the modified attached VI to understand what i mean. Unfortunately you
can not use read results within the script, but i hope this works."
Best Regards.
Matthieu Papaux
National Instruments
Attachments:
smbus_Read_Block_new.vi ‏36 KB

Similar Messages

How to create a procedure function with a return value of ref cursor?

Can anybody provide a sample about how to create a procedure function with a return value of REF CURSOR?
I heard if I can create a function to return a ref cursor, I can use VB to read its recordset.
Thanks a lot.

http://osi.oracle.com/~tkyte/ResultSets/index.html

How Create procedure or function with ADO ?

Hello,
How Create procedure or function with ADO?It's my question.
Thanks.
Henri

This message if post by Taiwan-ChangHaw-Oracle-Stored-Procedure-For-Business-Rule-Club
public bool ConnectDatabase()
try
{ string strConnectionString =
"Provider=OraOLEDB.Oracle" +";"+
     "Data Source=" + ConnectionParams.Datasource +";"+
"User Id =" + ConnectionParams.Username +";"+
"Password =" + ConnectionParams.Password;
     m_conn=new ADODB.Connection();
     m_conn.ConnectionString=strConnectionString;
     m_conn.Open("","","",0); //i_"YYAOl Open the connection
catch(Exception e)
{     System.Windows.Forms.MessageBox.Show(e.Message);
     return false;
return true; //YYAOl_B>3I9&connected successfully
public void InsertDescription(string p_product,string p_language,string p_tname,string p_tdescription)
{ string sql="{Call inserttranslateddescription(?,?,?,?,?)}";
try
{ ADODB._Command cmd=new ADODB.Command();//Create a command object
cmd.ActiveConnection=m_conn; //Set its active connection to open connection
ADODB.Properties properties=cmd.Properties;//Get the command properties into ADODB Properties object
IEnumerator ienum=properties.GetEnumerator();//Get an enumerator on above properties
ADODB.Property singleprop;
while(ienum.MoveNext()) //iterate through the enumerator
     {singleprop=(ADODB.Property)ienum.Current;//Get the current property from enumerator
     string propname= singleprop.Name; //Get the name of current property
     if(propname.Equals("NDatatype")) //if the property is 'NDatatype' set its value to true
     singleprop.Value=true;
cmd.CommandType=ADODB.CommandTypeEnum.adCmdText;
int pid=Int32.Parse(p_product);
ADODB._Parameter langid     =cmd.CreateParameter("langid",          ADODB.DataTypeEnum.adChar,ADODB.ParameterDirectionEnum.adParamInput, 100,p_language);
ADODB._Parameter productid =cmd.CreateParameter("productid",     ADODB.DataTypeEnum.adNumeric,ADODB.ParameterDirectionEnum.adParamInput, 100,pid);
ADODB._Parameter tname =cmd.CreateParameter("tname",          ADODB.DataTypeEnum.adBSTR,ADODB.ParameterDirectionEnum.adParamInput, 50,p_tname);
ADODB._Parameter tdescription=cmd.CreateParameter("tdescription",ADODB.DataTypeEnum.adBSTR,ADODB.ParameterDirectionEnum.adParamInput, 50,p_tdescription);
ADODB._Parameter check          =cmd.CreateParameter("check",          ADODB.DataTypeEnum.adNumeric,ADODB.ParameterDirectionEnum.adParamOutput,100,0);
cmd.Parameters.Append(langid);
cmd.Parameters.Append(productid);
cmd.Parameters.Append(tname);
cmd.Parameters.Append(tdescription);
cmd.Parameters.Append(check);
cmd.CommandText=sql;
//Execute the command to insert product details in database
object recs;
object param=p_language;
cmd.Execute(out recs,ref param,1);
ienum.Reset();
while(ienum.MoveNext()) //iterate through enumerator
{ singleprop=(ADODB.Property)ienum.Current;//Get the current property in to Property object
string propname= singleprop.Name; //Get the name of current property
if(propname.Equals("NDatatype")) //if it is 'NDatatype' set its value to true
singleprop.Value=false;
IEnumerator iprop=cmd.Parameters.GetEnumerator();//Get the enumerator for command parameters
while(iprop.MoveNext()) //loop through enumerator
{ //Get the current parameter in enumerator
ADODB._Parameter checkval=(ADODB._Parameter)iprop.Current;
if(checkval.Name.Equals("check")) //if the parameter is 'check'
if(checkval.Value.ToString().Equals("0")) //If check's value is zero data was inserted
System.Windows.Forms.MessageBox.Show("Product details Inserted successfully");
else
System.Windows.Forms.MessageBox.Show("Product Details Updated");//else data was updated
catch(Exception e)
System.Windows.Forms.MessageBox.Show(e.Message);//Display any error message
}

Problem creating an sql query with a parameter which is a list

Hi,
Im having a problem creating a certain SQL query.
The query looks like this:
SELECT gstock_id FROM germplasm_stock gps, germplasm gp WHERE gps.germplasm_id = gp.germplasm_id AND organism_id IN ($childList:VARCHAR).
the organism_id field is of DECIMAL type.
the parameter childList is actually a list of Id's, something like: 123,124,789
and it is created dynamically by an other function, so I cant just put it there staticlly.
I tried using the ARRAY type instead of VARCHAR, but that didn't work,
anyone knows how can I give this query a parameter which is a list of numbers ?
Thanks

I have tried all the following options and the same issue occurs:
EXEC dbo.uspGetSiteChanges @ChangeVersion = ?
With Parameter: 0, @ChangeVersion, ChangeVersion
EXEC dbo.uspGetSiteChanges ?
With Parameter: 0, @ChangeVersion, ChangeVersion
In my first data flow I use the following and it works on two OLE DB Sources:
EXEC dbo.uspGetSiteChanges @ChangeVersion = ?
With:
In my second data flow task, I use the same command and parameter mappings and it fails, very strange.

Problem creating an OData service with RFC-/BOR Import.

Hi Experts,
i am running always into the same problem
I want to create an Odata Channel with "SEGW" and Datamodel with an RFC import.
RFC si GET_CPU_ALL
but I am running always into the same problem when I want to generate the runtime.
I don´t know why.
Error: ... _DPC was generated with syntax errors....
I would really appreciate if someone could help me.
Thanks

Oh dear, your'e not an ABAP guy are you
OK, you can go back to my previous suggestion and do it a different way, but first...
TF_CPU_ALL isn't a table, it's a structure of type CPU_ALL. GET_CPU_ALL uses that as the interface structure for data it sends out.
Starting with a blank service, create a model by using DDIC import wizard, using CPU_ALL as the structure. Call the entity "CPU". Mark 'serialnr' as the key.Create an entityset called "CPUSet".
Generate the service.
Go to DPC_EXT, find method CPUSET_GET_ENTITYSET and redefine it. Assuming that you can leave the inputs as the defaults, call function GET_CPU_ALL in the method with the importing parameter TF_CPU_ALL assigned to ET_ENTITYSET.
call function 'GET_CPU_ALL'
 tables
 tf_cpu_all = et_entityset
 exceptions
 others = 1.
 if sy-subrc <> 0.
* Implement suitable error handling here
 endif.
That's all it needs.
Activate EXT class and try your service.
opu/odata/sap/ZCPUALL_SRV/CPUSet?$format=json
"type" : "ZCPUALL_SRV.CPU"
 "Type" : 101,
 "Subtype" : 3,
 "Serialnr" : 0,
 "NbrCpu" : 2,
 "Load1Avg" : 7,
 "Load5Avg" : 29,
 "Load15Avg" : 30,
 "IntSec" : 1059,
 "SyscSec" : 4555,
 "CsSec" : 895,
 "UsrTotal" : 3,
 "SysTotal" : 1,
 "IdleTotal" : 96,
 "IdleTrue" : 96,
 "WaitTrue" : 0
Did it myself in under 10 minutes from build to test.

Problems creating the Master Repository with MS SQL Server 2000

Hello guys!
I can't create the Master Repository with MS SQL Server 2000 database.
Wath is the correct adress in the URL?
I select the Driver: com.microsoft.jdbc.sqlserver.SQLServerDriver and the URL: *jdbc:microsoft:sqlserver://<host>:<port>;SelectMethod=cursor[;<property>=<value>...]*
Thanks
Maurício
Edited by: user857262 on 03/10/2008 10:05

Hi Maurício,
For MS SQL Server the following drivers should avaliable in /drivers folder (http://www.inetsoftware.de/),
* msutil.jar
* mssqlserver.jar
* msbase.jar
JDBC Driver is:
com.microsoft.jdbc.sqlserver.SQLServerDriver
JDBC URL is:
jdbc:sqlserver://serverName\instance:port;property=value[;property=value]
Example,
jdbc:sqlserver://myHost:1433;selectMethod=cursor;databaseName=myDB
Thanks,
G

Problems creating hrp1000/1001 infotypes with HR function RH_INSERT_INFTY

Hi,
I'm trying to use fm RH_INSERT_INFTY in an rfc to create Personnel Planning infotypes 1000 and 1001. (I.e. to create a position.) They are linked, so I've tried creating using update type (vtask) of 'D' (Dialog) as well as 'B' (Buffer update) to just update the buffer with the 1000 and 1001 before applying the update. Whichever way I try I get the error "Creation of object ID 00000000 is not allowed" when I call fm RH_INSERT_INFTY.
Any ideas what I'm doing wrong please.
Can you create an infotype 1000 and 1001 in one call to the fm ? Or do you have to call it twice, once for each infotype ?
Thanks,
Craig.

Hi Craig
To create an HR object, try the FM "RH_CREATE_OBJECT". To create relation data you can use "RH_INSERT_INFTY_1001".
Or you can make use of the HR BAPI written for this.
For HR objects (comprising also PD) you can use the Business Object "HRMasterDataReplica". It has a class method as "SaveReplicaMultiple" where you can pass your data to the interface.
You fill "BAPIHROBJ" and "BAPIHRINF" mainly and other infotype-related parameters. e.g. for infotype 1000 "PdObject" (structure like p1000) and for 1001 "PdObjectRelationships" (structure like p1001).
These are BO names, you can use the transaction code "BAPI" for more information.
The BAPI for this method is discussed also at BAPI_HRMASTER_SAVE_REPL_MULT.
And as a last thing, let me introduce you the SDN forums pointing system: You can assign points to posts you find helpful while solving your question. You can reward points by clicking the yellow star icon at header of each reply post. You can reward;
- one 10 points (solved)
- two 6 points (very helpful answer)
- many 2 points (helpful answer)
Kind Regards...
*--Serdar

Basic problem creating a template Functions not found

I'm trying to create a template with addt functionality
I have created a file which works OK.
Then covert it to a template with an editable area.
Create a new php file using the template
All seems to work Ok
But I always get the following error when executing the new page
File not found:
KT_functions.inc.php
Please upload the includes/ folder to the testing server.
I know the includes file is there and OK because the original php file worked OK
Can anyone help with this problem please?
I've checked the include statement e.g.
// Require the MXI classes
require_once ('../includes/mxi/MXI.php');
// Load the tNG classes
require_once('../includes/tng/tNG.inc.php');

Hi sandlegold,
not sure, but maybe you´ll have to modify the relative path to the includes folder
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Problem creating physical Standby database with RMAN

Hi All
I am trying to learn oracle dataguard and as part of the process learning creating standby database.
Platform : Sun-Fire-V250 Sparc, Solaris 10
Database Version - Oracle 11R2
I am creating standby database on same server, so directory structure is different.
Following the instructions on Oracle site I managed to create a functional physical standby database. But I am not able to create standby database using RMAN. These are the steps that I followed-
1.Set up all necessary parameters on primary database as done while creating physical standby database manually, eg setting force logging, creating standby logs etc.
2.Edited parameter file on primary database as done while creating manual pysical standby database creation. Some of the changes done are-
On Primary Database:
*.FAL_CLIENT='orcl11020' #Primary database unique name
*.FAL_SERVER='stdby_11' #Standby database unique name
db_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020'
log_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11/redo_mem','/<dir>/oradata/orcl11020/redo_mem'
standby_file_management=auto
*.log_archive_config='DG_CONFIG=(orcl11020,stdby_11)'
*.log_archive_dest_1='LOCATION=/<dir>/flash_recovery_area/ORCL11020/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orcl11020'
*.log_archive_dest_2='SERVICE=stdby_11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stdby_11'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
Copied same pfile for standby database and modified following-
*.control_files='/<dir>/oradata/stdby_11/stdby_11.ctl','/<dir>/fra_stdby/stdby_11/stdby_11.ctl'
*.db_name='orcl1102'
*.db_unique_name='stdby_11'
*.FAL_CLIENT='stdby_11'
*.FAL_SERVER='orcl11020'
db_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11'
log_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020/redo_mem','/<dir>/oradata/stdby_11/redo_mem'
standby_file_management=auto
*.log_archive_dest_1='LOCATION=/<dir>/fra_stdby/STDBY_11/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=stdby_11'
*.log_archive_dest_2='SERVICE=orcl11020 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
db_unique_name=orcl11020'
3. Add relevant information in tnsnames.ora and listener.ora files and then restart listener.
3. Created password file with same credential as primary database.
4.Up-to-date RMAN backup of primary database available.
5.Create standby controlfile with rman
While primary database s open (I tried with primary database in mount mode as well)-
$>rman catalog rman/paswd@rman target /
RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY;
6. Open a new terminal and startup standby database in nomount mode using parameter file created -
$>ORACLE_SID=stdby_11
$>export ORACLE_SID
$>sqlplus / as sysdba
SQL>STARTUP NOMOUNT pfile='<location/initfilename.ora'
SQL>quit
$> rman AUXILIARY / target sys/passwd@orcl11020 catalog rman/passwd@rman
RMAN>DUPLICATE TARGET DATABASE FOR STANDBY DORECOVER;
RMAN finishes without error but archive logs are not being tranported. Looking at the log, following caught my eye-
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
FAL[client, ARC2]: Error 16191 connecting to orcl11020 for fetching gap sequence
Errors in file /<>dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
Errors in file /<dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
So on both primary and standby I confirmed
SQL> show parameter remote_login_passwordfile
NAME TYPE VALUE
remote_login_passwordfile string EXCLUSIVE
To make double sure that password files are same, I shutdown both databases, delete password files and recreated with same credentials.
Password files are called - orapworcl11020 and orapwstdby_11
Can someone guide me where thisngs are going wrong here please.

Not sure if I understood it clearly.
SELECT * FROM V$ARCHIVE_GAP;
returns no rows so there is no gap.
But could you please explain me the result of the previous query. To catch up again, on standby when I check
SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
SEQUENCE# APPLIED
75 NO
74 NO
76 NO
77 NO
I understand that though archive files have been copied across but they are not applied yet.
On primary when I give your query -
SELECT name as STANDBY,SEQUENCE#,applied, completion_time
2 FROM v$archived_log
3 where dest_id=2
4 and sequence# BETWEEN 74 and 80;
I get -
STANDBY SEQUENCE# APPLIED COMPLETIO
stdby_11 74 YES 28-JUN-11
stdby_11 75 YES 28-JUN-11
stdby_11 76 YES 29-JUN-11
stdby_11 77 YES 29-JUN-11
stdby_11 78 YES 29-JUN-11
stdby_11 79 YES 29-JUN-11
stdby_11 80 YES 29-JUN-11
stdby_11 75 NO 07-JUL-11
stdby_11 74 NO 07-JUL-11
stdby_11 76 NO 07-JUL-11
stdby_11 77 NO 07-JUL-11
stdby_11 78 NO 07-JUL-11
I have intentionally given
sequence# BETWEEN 74 and 80
because I know in the current incarnaion of the database, max sequence is 78.
So my understanding is, the rows between 28-29 June are from previous incarnation, correct me if I am wrong
Archive files of the current incarnation, since I successfully created standby database are shipped but yet to be applied - am I right?
Then my final question is, when will these archives be applied to standby database?
I am sorry to ask too many questions but I am just trying to understand how it all works.
Thanks for your help again

Having problems creating PDF from website with query-string URLs

I have a website that I would like to create a PDF from. I am using the Create -> PDF from Web Page..., selecting the site's home page, and capturing 2 levels, with "stay on same path" and "stay on same server" checked in order to limit the scope of the crawl.
Where the pages are at example.com/foo/ and example.com/foo/bar/, this works fine. However, where the pages are at example.com/foo/ and example.com/foo/?p=1, the page represented by the query string URL is not converted to the PDF.
This is a problem, given that the site I want to archive as a PDF uses query strings for most of its pages.
I have been able to individually convert a single query-string-based page into a PDF using this method, but doing this for every page on the site would be almost impossible given the sheer number of pages on the site.
Is this a known issue? Is there a workaround other than separately capturing each page (which would be prohibitive effort)?
I have tried this in both Acrobat Pro X and Acrobat Pro 9 for Mac, with the same results.

Remember, Acrobat is a 32-bit application and as such cannot access all that 'extra' stuff.
Be well...

Problems creating an spatial index with srid=4326

Hi!
I would like to know if somebody can help me with the following problem: We are using the 10.2.0.1 version and we need that our SRID value is 4326. We do not have problems with 8307 or another value. However, when we tried to use srid = 4326, appears the following error message:
Error on line 17 CREATE INDEX SIDX_D3M_SDO_GEOMETRY ON DAT_3DM_MODEL (DM3_SDO_GEOMETRY) INDEXTYPE ORA-29855: an error in the execution of routine ODCIINDEXCREATE has taken place ORA-13249: internal error in Spatial index: [mdidxrbd] ORA-13249: Error initializing geodetic transform ORA-06512: in “MDSYS.SDO_INDEX_METHOD_10I”, line 10
The PL/SQL that we used is the following one:
DELETE FROM USER_SDO_GEOM_METADATA WHERE TABLE_NAME = “DAT_3DM_MODEL”
COMMIT
INSERT INTO USER_SDO_GEOM_METADATA (TABLE_NAME, COLUMN_NAME, DIMINFO, SRID) VALUES('DAT_3DM_MODEL', 'DM3_SDO_GEOMETRY', MDSYS.SDO_DIM_ARRAY ( MDSYS.SDO_DIM_ELEMENT ('LONGITUDE', -180, 180, 0,05), -- MDSYS.SDO_DIM_ELEMENT ('LATITUDE', -90, 90, 0.05) ), 4326 )
CREATE INDEX SIDX_D3M_SDO_GEOMETRY ON DAT_3DM_MODEL (DM3_SDO_GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX
Thanks in advance,
Susana.

I cannot reproduce the error, in my environment. However:
Your insert statement into USER_SDO_GEOM_METADATA appears to have included some typos. They might have happened, when transcribing. Please make sure you use the following:
INSERT INTO USER_SDO_GEOM_METADATA (
TABLE_NAME,
COLUMN_NAME,
DIMINFO,
SRID)
VALUES(
'DAT_3DM_MODEL',
'DM3_SDO_GEOMETRY',
MDSYS.SDO_DIM_ARRAY (
MDSYS.SDO_DIM_ELEMENT ('LONGITUDE', -180, 180, 10),
MDSYS.SDO_DIM_ELEMENT ('LATITUDE', -90, 90, 10)),
4326);
However, the actual culprit is most certainly different. As I suspected, it might be related to the "decimal comma": In Germany, for instance, a decimal comma is used, instead of a decimal point. You have used a decimal comma in your original INSERT, as well (0,05 instead of 0.05).
Please try the following:
SQL> select wktext from cs_srs where srid = 4326;
WKTEXT
GEOGCS [ "WGS 84", DATUM ["World Geodetic System 1984 (EPSG ID 6326)", SPHEROID
["WGS 84 (EPSG ID 7030)", 6378137, 298.257223563]], PRIMEM [ "Greenwich", 0.0000
00 ], UNIT ["Decimal Degree", 0.01745329251994328]]
On your system, you will likely find a decimal comma, where my output has a decimal point. This is bug 5097326, which has been fixed, and backported to 10.2.0.3 and 10.2.0.4.

Problem creating an extendable panel with a header

Hi -
I'm trying to create a base panel class. What it needs is a header at the
top of it with a title box(another panel) of a different color. The title of
course is in the title box. My primitive solution was to create a parent
panel and place the title box on the header panel, then the header on
the parent panel. My problem is that I can't extend from that and add
components to it with the header there.
Does anybody have a more elegant solution?
Thanks.

Hello Steven,
You can use createdby field to determine the docentry of the base document instead of quering docentry by docnum
select createdby, transtype, baseref from jdt1
Note: Always set the correct document type for payments: (createdby is ok in integer format)
Example:
Opening Balance: JE # 8 amount 1000, created by Opening balance (not JE)
   vPay.Invoices.DocEntry = 8
   vPay.Invoices.InvoiceType = BoRcptInvTypes.it_OpeningBalance
   vPay.Invoices.SumApplied = 1000
   Call vPay.Invoices.Add
Opening Balance: JE # 8 amount 1000, created by Journal Entry
   vPay.Invoices.DocEntry = 8
   vPay.Invoices.InvoiceType = BoRcptInvTypes.it_JournalEntry
   vPay.Invoices.SumApplied = 1000
   Call vPay.Invoices.Add
Sales Invoice: DocEntry: 11 amount 1000
   vPay.Invoices.DocEntry = 11
   vPay.Invoices.InvoiceType = BoRcptInvTypes.it_Invoice
   vPay.Invoices.SumApplied = 1000
   Call vPay.Invoices.Add
Regards,
J.

Problem Creating DataStore in DS with ECC 6.0 as datasource

Dear experts,
I was unable to create this DataStore on DataServices on this Windows 2003 SP2 machine. My source system is ECC 6.0. I get "Cannot establish database connection. .... Please make sure SAP server is running and the login information is correct. (BODI-1111348).
I have provided the server name (192.168.xxx.xxx), username, password and in Advanced, I supplied Language as EN, Client Number as 800 and System NUmber as 00.
I was wondering do I need to install anything related to ECC on this windows machine? The ECC is also on Windows NT machine.

Here are some things to check:
- Verify that the SAP app server IP address, username, password, client and SID are correct
- Try to ping the SAP server IP address
- Try to ping the SAP host DNS name. You may need to use the complete DNS name, i.e., myserver.mycompany.com
- In the datastore, try replacing the SAP host's IP address with the DNS name
- If this a dialog account that you use to log into SAP GUI then your SAP system may require a non-dialog account for service connections
These topics are discussed in the Technical Manual, Supplement for SAP
- Did you install the DS functions in SAP?
- Have you set up your SAP user authorizations?
This link may be useful
http://wiki.sdn.sap.com/wiki/display/BOBJ/ConnectingtoSAP

Problem creating TO using Function Module L_TO_CREATE_DN

Hi Gurus,
I am trying to create TO using the Function Module L_TO_CREATE_DN. Its creating TO for deliveries for materials which are not batch split, however when I am taking delivery consisting of Batch Split material, its not creating and throwing a error with sy-subrc = 15. The error which I am experiencing is Item not handled in batches and batch split item cannot be edited. How to overcome this issue and create the TO.
Regards,
Avik
Edited by: avik2005uitbu on Dec 15, 2011 8:10 PM

Hi,
Please check the WM config for the Warehouse / Movement type(Tx. OMLX) . There we have option to give as immediate confirmation. This may be the reason for TO getting confirmed when created.
U can this by creating a transfer order for the same movement type manually in TX. LT03. After you save if the To is confirmed then its a config setup @ Warehouse / Movement type.
Regards,
Bhargava

Problems creating Blu Ray Discs with AME Presets in CS4

After several weeks wasted (months back) with an ATI 5750 graphics card in Win 7/and CS4 (not working correctly) - I finally resolved by swapping with a NVidia GTS250 card .....but all my troubles are not over yet ....
I'm running Premiere CS4 and have finally just got down to testing creation of a Blu Ray test disc from some AVCHD 1920x1080 HD footage I am editing from my new camera.
My work in CS4 is just testing at present as I used to use CS3 [still have on my dual core machine with Matrox RTX2] - and have successfully created Blu Ray discs from HDV material in CS3 - but using Blu Ray MPEG 2 settings.
New machine Win 7 - 64 bit
Premiere CS4 is at 4-2-0 version
Encore at 4-0-1 version
These are the last updates
I've selected a short test piece (about 2 mins)on Premiere timeline and initially tried Media export using Adobe Media encoder.
I selected H264 BluRay codec in media encoder. Hi quality 1080 25 fps.(PAL)
This creates dual MP4 Video and Audio streams
Encode process goes OK, just slightly slower than real time, (I'm using i7-930 Quad Core and Win 7 64 Bit)
Now - when I come to input the encoded video file into Encore as an Asset - Encore freezes and the whole machine locks up !!!
Audio file imports OK but the Encore software does not like the encoded Video file
I've re-installed Premiere and Encore twice in case of bad install. It wasn't that.
I also found Adobe Media player couldn't play the file created by AME either - but it would play on a Premiere timeline?
So is Adobe Media encoder messing up here ?
So - .....3 hours of testing later ....I stumble on a Support thread from someone on the Forum that they found AME preset has "HIGH" in the Encoding Profile Preset - when it should be MAIN ?.
Not sure what these settings do - but tried changing that parameter and re-encoded the Video file with H264 BluRay setting - all to no avail as when I try importing again the machne just locks up ?
My final search in Premiere help file about creating BluRay discs ONLY talks about using MPEG 2 BluRay setting for creating BluRay discs
It does not specify H264. Why is that?
Can one of the moderators / experts confirm if H264 Blu ray format is supported for BluRay disc creation in CS4 please??
Better still please tell me the exact settings for Adobe Media encoder so it will import into Encore without having to be transcoded again.
H264 should work - yes ?
Final comment
As an alternative method, I tried sending the short timeline in Premiere (using Dynamic Link) to Encore to test that route for making a BluRay disc
Bearing in mind the sequence is only about 2 mins long - when I ty to Transcode using the engine within Encore - the process takes a ridiculously long time and twice it has crashed just before the end of the process......
Can someone explain why the encode process in Encore takes such a long time as I thought it used the Adobe Media encoder engine as well.?
Adobe Media Encoder is much faster used stand alone mode.
Encore seems to not use that ?
Anyway - conclusion is that using Encore to encode the tmeline is a non starter as it takes too long.
why so slow on such a fast machine?....I know HD encoding is demanding but not that demanding with a decent machine.
So the question is ....
How do I encode in the most efficient and fastest way possible (using H264) for Blu Ray authoring into Encore without need for more Transcodes?
Any help or suggestions welcome as I'm now hitting my head against the wall :-)
I have not gone through Adobe Support desk as it is usually a waste of time.{Dear VP of Adobe Customer Service - please do get this sorted out in the near future if you want to retain loyal customers....}
I cannot believe how disappointing CS4 is turning out to be.
After investing in a very fast PC machine etc the whole user experience is somewhat of a let down.
Why so many issues for such a small test??

Picking up on my original post about H264 - as I have a dual boot machine I also have a clean installed Win 7 /64bit partition which I use for general bits of work.
On that I have CyberPowerDVD SW installed which plays all Video files fine including BluRay material etc.
Interestingly when I try to play the file that AME has created from the BluRay H264 preset it says 'It cannot play the file as it is a format it does not recognise...'
This is really weird and would suggest AME is not encoding the file corrrectly??
I have already removed and made a re-install of CS4 on my main [video editing] partition but there were some fragments of CS4 left intact
How do I completely remove everything?
I tried the CS4 clean script but it said it relied on Microsoft CLean Up utility and gave a link
When I loooked on Microsoft web site the link to download it had been removed?
Also Adobe say the CS4 remove script is no longer supported ?
Can anyone advise on the correct tool/procedure to completely remove CS4 from a Win 7/64bit installation so I can then try re-install of CS4 one more time....in case the installation is corrupt in some way
I can't explain why I am having this problem otherwise if other people find AME encodes OK with H264 BluRay preset.

Problem creating an SMBusBlockRead function with 8451

Similar Messages

Maybe you are looking for