Problem creating DB in Centos 4.4 using dbca

Hello,
I have a trouble creating a Db in CentOS 4.4 using dbca. The oracle software is already installed in the CentOS 4.4 but when I try to create a DB using dbca I get the following error (warnings).
Warning:
Name: DirText
Class: XmTextField
Character '\145' not supported in font. Discarded.
Warning:
Name: DirText
Class: XmTextField
Character '\57' not supported in font. Discarded.
/oracle/92/bin/dbca: line 124: 4475 Segmentation fault $JRE_DIR/bin/jre -D ORACLE_HOME=$OH -DJDBC_PROTOCOL=thin -mx64m -classpath $CLASSPATH oracle.sysman. assistants.dbca.Dbca $ARGUMENTS
[oracle@localhost ~]$
The warnings are many. I can't really write all them here. Have you tried the installation your self? Could you please help me out to solve this delima?
I would really much appreciate any help provided. I look forward to hearing from you.
Regards
Tom

I got out of such a dilema by upgrading to Oracle 10.
Any reason you need to stick with Oracle9i?

Similar Messages

I have a problem creating a pdf from within Firefox using the print to function.

I have a problem creating a PDF from within Firefox. I get an error message stating that Adobe PDF creation cannot continue because Acrobat is not activated. Acrobat Pro then opens. If it try to create the PDF again, the same problem. I have FF ver 3.6.10 and Acrobat Pro 8 (from Acrobat CS3).

This is an Apple user forum, no-one from Apple is here.

How to create another instance on linux without using dbca?

I have an oracle database (or instance) named viton1 on my linux.
Now I want to create another instance (or database) named viton2 on my linux without using dbca.
I know I can create a database by runing a sql script : create database ......
But my problem is:
before I can run the script for create database, I must startup nomount database.
Before I can startup nomount the instance, I have to connect the instance.
So I do it:
$sqlplus /nolog
sql > conn sys/password as sysdba;
sql >
then I connected to viton1, that's not what I expected.
In order not to connect to viton1, I set ORACLE_SID=viton2. Then it show error: insufficient privilege.
Who can tell me the right way to create another database without using dbca?
Thanks in advance.

In $ORACLE_BASE/admin you should have a directory structure for the viton1 instance : create a similar directory structure for the viton2 instance.
In the pfile subdirectory create the initviton2.ora file : you can copy it from initviton1.ora file and change all occurrences of viton1 to viton2.
At OS prompt : export ORACLE_SID=viton2, then
sqlplus /nolog
conn / as sysdba
startup nomount pfile=$ORACLE_BASE/admin/viton2/pfile/initviton2.ora
then CREATE DATABASE.....

Exception while creating Database in oracle10g Solaris 10 using DBCA

hi,
While i am creating a DB using DBCA in oracle_home/bin directory i am getting the following mentioned exception.
Exception in thread "main"
I have set the DISPLAY to the local machine(DISPLAY=LocalMachineIp:0.0 ; export DISPLAY)
After this i have executed dbca. i get the message ---Exception in thread "main".
Can anybody kindly suggest me in resolving it.
Thanks in Advance

Can you run any other x-applications (eg. xclock)?
Usually DBCA will give an appropriate error if it is a display issue. Can you run any other Oracle utilities, like NETCA?

Problem Creating Project (Flash Builder 4) which uses LiveCycle DS

I have a web app which uses LiveCycle DS 2.6.1, however, when I try to create a new flex project I am getting this error:
Only LiveCycle Data Services 2.6 and higher are supported.
Here are the steps in Flash Builder 4
1. File -> New -> Flex Project
2. Set project name
3. Point folder to existing source code
4. Change "Application server type" to "J2EE"
5. Check the "Use remote object acces service"
6. Select "LiveCycle Data Services ES" radio button
7. Click next
8. Un-check "Use default location for local LiveCycle Data Services server
9. Set "Root Folder" to "C:\tomcat\webapps\myapp"
-- in myapp, I have WEB-INF\flex of course
10. Set root URL and context root
11. Click "Validate Configuration"
This gives me the error: "Only LiveCycle Data Services 2.6 and higher are supported."
Any ideas? How is Flash Builder determining the version of LiveCycle?

Hi Jeremy,
I tried the steps you mentioned and cannot reproduce the problem. You mentioned you are pointing your project location to existing source code. Was there a previous FB project at that location? Was that project using an older version of LCDS before? If you create a new project and point it to a new emoty project location folder (or use default workspace location), do you still see the problem? Any more information you can give me to help reproduce the problem would help.
thanks!
-george

Problem creating directory configuration for BPM when using secure ldap

I have all the configuration sorted for the creation, but when the config wizard tries to connect to the server I get this:
fuego.directory.DirectoryRuntimeException: Exception [sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target].
I'm assuming it's because the config tool isn't using my keyStore, but I am unable to find out where I add this!
Thanks
mARK

Hi,
The problem got resolved when we tried same thing in BI publisher 10.1.3.4.2 (xmlpserver) in weblogic 10.3.5. It seems that BI publisher 10.1.3.4.1 does not have dynamic URI support.
Thanks,
Sanjaya
Edited by: Sanjaya on Sep 4, 2012 2:09 AM

Problem creating an instance of an applet using Schlumberger toolkit

Hi All,
I am using Schlumberger toolkit 4.4 for testing my javacard applets. I have always had this doubt about the installation parameters, what exactly are these. I understand that these need to be passed to install method inside the applet. But what are these parameters, if somebody can give an example.. it will be wonderful.
I have loaded the applet(.ijc) file on to the smart card and when i try to create and instance of the applet, the toolkit asks for applet aid and install parameters. I am aware of the applet aid but have no clue about the install parameters. Right now I am testing out the sample wallet applet in the jcdk. I am yet to try out my own applets. If somebody can tell me the install parameters for the sample wallet applet, I can try and corelate the same for my applets.
cheers,
ganesh

Normally installation parameters are just passed to the Applet itself. It can evaluate it in the install method. The system specific parameters may be used by the OS to set minimum memory limits. What install parameters are required by your smart card OS, you should find in the data sheet or contact Gemalto customer support (Schlumberger --> Axalto --> Gemalto).
For reference check GP 2.1.1 card specification, 9.5 INSTALL Command, 9.5.2.3.6 INSTALL [for load] and INSTALL [for install] Parameters, Table 9-36: Install Parameter Tags

Problem in creating client side PDF with image using flex and AlivePD

I need a favor I am creating client side PDF with image using flex and AlivePDF for a web based application. Images have been generated on that pdf but it is creating problem for large size images as half of the image disappeared from that pdf.I am taking the image inside a canvas . How do i control my images so that they come fit on that pdf file for any image size that i take.
Thanks in advance
Atishay

I am having a similar and more serious problem. It takes a
long time to execute, but even attaching a small image balloons the
pdf to 6MB plus. After a few images it gets up to 20MB. These are
100k jpeg files being attached. The resulting PDF is too large to
email or process effectively. Does anyone know how to reduce
size/processing?

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

Sandra,
See this Apple support document for information on reporting an issue with your iTunes purchase.
http://support.apple.com/kb/HT1933
B-rock

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

Using iDVD, I've no problem creating a slideshow, but I want to add three seperate sound files, in this case speeches I've got in iTunes. I want to create three individual buttons/sub menu to access them individually from the photos. Can anyone help

Using iDVD I've no problem creating a slideshow, but am having problems trying to add three seperate sound files in this case three speeches that I hold in iTunes. I want to be able to access them individually and seperately from the photo slideshow. Can anyone advise if this can be done and if it can, how I go about creating the seperate menu and buttons.

If you'd like to integrate the speeches with the slideshow, I'd do that in iMovie where you'll have more control over the timing. Use chapter markers at the beginning of each speech so the viewer can jump to a particular speech (note that chapter markers advance the viewer to a particular spot -- the viewer keeps watching the rest of the video until the end of everything or until they use the remote's menu button).
If you're just wanting the speeches to be on the DVD so people can listen to the speeches after seeing your slideshow, you could:
- use iDVD or iMovie to make a "slideshow" with just 1 image matching the length of a speech.
- create three submenus and use the speeches as menu music. Here's a (random) video on creating submenus:
http://www.youtube.com/watch?v=DlhQSb_D5kc
John

Problem in create database use dbca in RAC

i setup a two-nodes RAC, and use dbca to create db
here is the output of dbca
[oracle@rac1 ~]$ dbca -silent -responseFile /home/oracle/dbca.rsp
Copying database files
1% complete
3% complete
9% complete
15% complete
21% complete
27% complete
30% complete
Creating and starting Oracle instance
32% complete
36% complete
40% complete
44% complete
45% complete
48% complete
50% complete
Creating cluster database views
52% complete
70% complete
Completing Database Creation
73% complete
76% complete
79% complete
80% complete
81% complete
90% complete
99% complete
100% complete
Look at the log file "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb/mydb.log" for further details.
and here is the log output:
Failed to retrieve network listener resources required for the Real Application Clusters high
availability extensions configurations on the following nodes: [rac1, rac2].
Do you want listeners on port 1521 with prefix LISTENER to be created on nodes [rac1, rac2]
automatically? If you would like to configure the listener with different properties, run NetCA
before continuing.
PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [CRS-0215: Could not start
resource 'ora.rac1.ASM1.asm'.]
PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [CRS-0215: Could not start
resource 'ora.rac2.ASM2.asm'.]
Could not mount the diskgroup on node: rac2. The ASM instance on node rac2 is not started.
Could not mount the diskgroup on node: rac2. The ASM instance on node rac2 is not started.
Copying database files
DBCA_PROGRESS : 1%
DBCA_PROGRESS : 3%
DBCA_PROGRESS : 9%
DBCA_PROGRESS : 15%
DBCA_PROGRESS : 21%
DBCA_PROGRESS : 27%
DBCA_PROGRESS : 30%
Creating and starting Oracle instance
DBCA_PROGRESS : 32%
DBCA_PROGRESS : 36%
DBCA_PROGRESS : 40%
DBCA_PROGRESS : 44%
DBCA_PROGRESS : 45%
DBCA_PROGRESS : 48%
DBCA_PROGRESS : 50%
Creating cluster database views
DBCA_PROGRESS : 52%
DBCA_PROGRESS : 70%
Completing Database Creation
Failed to start listeners on nodes "[rac1, rac2]" of cluster database "mydb", "CRS-1028: Dependency
analysis failed because of:
CRS-0223: Resource 'ora.rac2.LISTENER_RAC2.lsnr' has placement error.".
DBCA_PROGRESS : 73%
DBCA_PROGRESS : 76%
DBCA_PROGRESS : 79%
ORA-01078: failure in processing system parameters
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+ORADG/mydb/spfilemydb.ora'
ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-15056: additional error message
ORA-17503: ksfdopn:DGOpenFile05 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-15173: entry 'spfilemydb.ora' does not exist in directory 'mydb'
ORA-06512: at line 4
ORA-01034: ORACLE not available
DBCA_PROGRESS : 80%
ORA-01034: ORACLE not available
ORA-01034: ORACLE not available
ORA-01034: ORACLE not available
DBCA_PROGRESS : 81%
ORA-01034: ORACLE not available
DBCA_PROGRESS : 90%
Enterprise manager configuration failed due to the following error -
Invalid username/password.
Refer to the log file at /opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb/emConfig.log for more
details.
You can retry configuring this database with Enterprise Manager later by manually running
/opt/ora/product/10.2.0/db_1/bin/emca script.
DBCA_PROGRESS : 99%
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
PRKP-1001 : Error starting instance mydb1 on node rac1
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.mydb.mydb1.inst' has placement error.
PRKP-1001 : Error starting instance mydb2 on node rac2
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.mydb.mydb2.inst' has placement error.
DBCA_PROGRESS : 100%
Database creation complete. Check the logfiles at
/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb for details.
Database Information:
Global Database Name:mydb
System Identifier(SID) Prefix:mydb
it should be run netca　before running dbca?

this time i run netca first,and then run dbca to configure the ASM,after that i run dbca to create database
listener and asm instance is online,but when i create DB ,still have error
Copying database files
DBCA_PROGRESS : 1%
DBCA_PROGRESS : 3%
DBCA_PROGRESS : 9%
DBCA_PROGRESS : 15%
DBCA_PROGRESS : 21%
DBCA_PROGRESS : 27%
DBCA_PROGRESS : 30%
Creating and starting Oracle instance
DBCA_PROGRESS : 32%
DBCA_PROGRESS : 36%
DBCA_PROGRESS : 40%
DBCA_PROGRESS : 44%
DBCA_PROGRESS : 45%
DBCA_PROGRESS : 48%
DBCA_PROGRESS : 50%
Creating cluster database views
DBCA_PROGRESS : 52%
DBCA_PROGRESS : 70%
Completing Database Creation
DBCA_PROGRESS : 73%
DBCA_PROGRESS : 76%
DBCA_PROGRESS : 79%
ORA-01078: failure in processing system parameters
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+ORADG/mydb/spfilemydb.ora'
ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-15056: additional error message
ORA-17503: ksfdopn:DGOpenFile05 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-15173: entry 'spfilemydb.ora' does not exist in directory 'mydb'
ORA-06512: at line 4
ORA-01034: ORACLE not available
DBCA_PROGRESS : 80%
ORA-01034: ORACLE not available
ORA-01034: ORACLE not available
DBCA_PROGRESS : 89%
DBCA_PROGRESS : 98%
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
PRKP-1001 : Error starting instance mydb1 on node rac1
CRS-0215: Could not start resource 'ora.mydb.mydb1.inst'.
PRKP-1001 : Error starting instance mydb2 on node rac2
CRS-0215: Could not start resource 'ora.mydb.mydb2.inst'.
DBCA_PROGRESS : 100%
following info from my template file
<MiscParams>
<databaseType>MULTIPURPOSE</databaseType>
<maxUserConn>20</maxUserConn>
<percentageMemTOSGA>40</percentageMemTOSGA>
<customSGA>false</customSGA>
<archiveLogMode>false</archiveLogMode>
<initParamFileName>+ORADG/admin/{DB_UNIQUE_NAME}/pfile/init.ora</initParamFileName>
</MiscParams>
<SPfile useSPFile="true">{ORACLE_HOME}/dbs/spfile{SID}.ora</SPfile>
</InitParamAttributes>
and dbca create +ORADG in /home/oracle dir (why??)
[oracle@rac1 ~]$ ls +ORADG/admin/mydb/pfile/init.ora.6132011173958
+ORADG/admin/mydb/pfile/init.ora.6132011173958
Edited by: 859340 on 2011-7-12 下午7:25

Problem creating database in RHEL3 using dbca

I have installed oracle 9iR2 on RHEL3 and applied the patch 3006854
but while installing installing Net Configuration Assistant was not installed it gave an error.
now I am trying to create database using dbca but getting an error as
ORA-12546:TNS:Permission denined.
plz guide me in solving this problem

At which step/stage in DBCA you get this error?
You can try to dump out the creation scripts and run them manually see if you can get through.

Problem while creating database using dbca

Hi all,
I am getting following error when I try to create a database (fresh installation) using dbca on linux ES4, oracle 10.2.0.1 (Rev2). Any help much appreciated.
ORA-19624: operation failed, retry possible,
ORA-19870: error reading backup piece /u01/app/product/10.2.0/db_1/assistants/dbca/templates/Seed_Database_8k.dbf
ORA-19505: failed to identify file /u01/app/product/10.2.0/db_1/assistants/dbca/templates/Seed_Database_8k.dbf
ORA-27037: unable to obtain file staus.
Thanks,

Hi,
You saw if this file /u01/app/product/10.2.0/db_1/assistants/dbca/templates/Seed_Database_8k.dbf exists ?
See if this link help you:
database 10gR2 configuration assistant error
Cheers

Problem creating DB in Centos 4.4 using dbca

Similar Messages

Maybe you are looking for