Problem creation of variable

Hi all,
I've got a little problem in BEx.
I'm trying to create an offset.
For that, i created a new variable on 0CALMONTH, with replacement path with tha variable of 0CALMONTH : "0I_CMNTH".
But when I put this variable, the following error appears :"Name ZCOMPT" already exists; select a different name."
I investigated and this "ZCOMPT" is the name of a variable of the infoobject "ZBPARTNR" which has 0CALMONTH as attribute.
So can you help me in order that i can correctly create this offset ?
Thanks for help,
Points will be assigned,
Vince.

Vince,
I think the system somehow accepted two variables with the same technical name ZCOMPT earlier and now it has realised it. The system would not allow for two variables to have the same technical name. Try doing the following:
Try creating a variable with a different name from what you are doing now say ZTEST.
If you get the same message that you are getting now, then the issue is with the variable ZCOMPT and not with your variable.
Then you will have to delete one of the variables ZCOMPT. That is the only solution. Once one of the variables is deleted, then you can go ahead with your work.
Thanks.

Similar Messages

Problem with formula variable

HI,
I am facing problem with formula variable with replacement path. my requirement is system date - posting date.
here i created 2 formula variable one is system date. second formula vaiable with replacement path is posting date. second formula vaiable not populating data. please help on that.
regards,
kris

Hi,
here is some idea.. here i have taken expample dates 1)notification creation date and 2) notification completion.
1st:in the query designer at key figure coloumn create
one local formula.in that local formula create formula
variable with replacement path.in that take reference character
notification completion.in the next tab take replace ment
as key.in the last tab select "date".
2nd: do the same thing for the notification creation date.
3 rd : create 3 rd local formula and do the substraction
for the first 2 local formulas.
4th:create codition on the difference which u have find with
on that condition u can create one user entry varibale.
5th:while u defining the query put these 2 dates,i,e
notification completion, notification creation date in the character block.
If not system will ignore the formula variable which u created in
above steps.
Hope this wil help u.
regards....KP

Problems with /tmp variable

Hi,
I'm writing a shell script and I seem to be having problems with a variable that is creates a directory in the /tmp directory. Essentially, there are several points where various parts of the script call out information that gets exported to that directory. My script is failing upon creation of this directory, is there any specific permissions on the /tmp directory in mac that would need to be set before something like this occurred?
Thanks!

My script is failing upon creation of this directory
Maybe you could post your code, that way we can see how you're trying to create the directory and may be able to spot the problem. As it is we're working blind, and that's not easy.

Problem with application-variables - CFLOCK?

Hi,
i have a problem with my application. It is a multi-user
application with 100 parallel-users and CFMX 7.
The problem wich occures is with application variables. These
are mainly structs wich get filled onApplicationStart(). The
problem is, that the variables suddenly disappear, they are empty.
I have read about CFLock and found out, that it is necesseary
to use cflock. And i found out, that onApplicationStart does
correct locking automatically. That is where i do not understand
the problem. The variables get intialized correctly and in further
they only get read-access. Why can they be corrupted?
My other question about that is, wheather i need cflock for
all Read-Access to Application and Session-Variables, even if there
happens no writing to the variables?
Best Regards,
Andreas

> ?The element of position 2, of dimension 2, of an array
object used as part of
> an expression, cannot be found.?
> The array is in this case the struct.
Well, OK, that could be a problem. Arrays are not structs:
they are two
different things, are not interchangeable, and have
completely different
sets of functions to utilise them. You cannot treat a struct
as an array.
If CF is claiming your "struct" is an array, then it actually
*is* an
array, not a struct.
What's the line of code which is generating that error?
I suppose one could get this error if you have an array of
structs thus:
myArray
.key1
myArray.key2
(etc)
and you're trying to reference it with a numeric key rather
than by key
name, eg:
myArray
[n]
When n is an integer value, rather than a string (which
corresponds to the
name of the key).
> > Have you trapped the error, done a <cfdump>
of the application scope and
> > checked to see if it's the whole lot going awry, or
just some values?
> I have not used cfdump for it, because the server had to
be immediately
> restarted for our customers. But i think, that it is
not completely empty,
> because the index runs to pos2 of dimenstion2.
So does this not happen in your dev / testing environment?
> Will
> onApplicationStart() be called before? Or only if
onRequestStart() returns true?
I would ***-u-me that the application one would be called
before the
request one. It's pretty easy for you to test this though, I
should think?
(Sorry: for reasons beyond the scope of this conversation,
we're still
forced to use Application.cfm in our software, so I've only a
passing
knowledge of how Application.cfc works).
> Here is the code from onRequestStart()
> <cffunction name="onRequestStart"
returntype="boolean">
> <cfargument name="Requestedpage" required="yes" />
> <cfscript>
> var lFile = "/cargorent/Login.cfm";
> var iPosn = ListFindNoCase( lFile,
Arguments.Requestedpage );
> if( iPosn gt 0 )
> return true;
>
> if( NOT IsDefined( "session.user.Loginname" ) or
session.user.Loginname eq
> "" )
> {
> WriteOutput( " The current user is no
longer valid, please log in
> again." & chr(10) & chr(13)
> WriteOutput( "<script
language=""javascript"">parent.location = ""
http://"
> & CGI.HTTP_HOST &
"/Login/Login.cfm"";</script>" );
> return false;
> }
>
> return true;
> </cfscript>
> </cffunction>
One thing I will say here is that I really think you should
be separating
your processing from your display. A function should do
processing. it
should pass that processing back to a CFM template which
should handle
whatever needs to be displayed on the browser. Although
that's nowt to do
with your current issue.
Adam

Problem with String variable

I am new to Java Programming.
I have a line of code that works and does what is supposed to.
faceData.getProfile("Lisa").removeFriend("Curtis");
If I assign the strings to variables such as-
String name = "Lisa";
String fName = "Curtis";
and then plug those into the same line of code, it does not work
faceData.getProfile(name).removeFriend(fName);
What could be causing the problem?
I even added some lines to print out what is stored in the variables to verify that they are what they should be, but for some reason the variables do not work while putting the strings in quotes does. Any ideas?

I guarantee that something about your assertions are incorrect. Those variables are either not equal to the values you claim, or something else is going on. But it's not a problem with string variables versus string constants.
Edit: My best guess in lack of a real example from you, is that the strings in question have non-printable characters in them, such as trailing spaces or line feeds.

Creation of Variables in BEx reporting

Hi,
I want to know the Creation process or steps for creation of variables in BEx Reporting.
Please let me know.
Thanks & Best Regards,
Venkata.

Hi,
there are various kind of variables- refer this -
http://help.sap.com/saphelp_bw33/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/frameset.htm
if you want to create variable on char -
go to BEx Query designer, create your query , go to left panel & that characteristics--open that -- see variable - right click & create.
it will take you through all the steps.
hope it helps
regards
Vikash

TPC 2012 - Problems with shared variable

Hi,
I tried to program simmilar thing to this one http://zone.ni.com/devzone/cda/tut/p/id/5548 on TPC 2012. But it doesn't work.I can see that both programs on my laptop and TPC are working(I've added an additional counter with display), but I cannot see any effect on TPC when I change the value of shared variable on my laptop. I use LabView 8.6 with Touch Panel Module. My question is what are the exact steps to run such application on TPC2012? Are they the same as for TPC 2006?
I've noticed following issues:
1.I cannot deploy the program from Project Manager(there is an information that maybe TPC Service is not started. - I've found such information about TPC Service http://digital.ni.com/public.nsf/allkb/DE177828D27A14A48625734E00768B66 but in fact I cannot find Start » All Programs»National Instruments » NI TPC Service » NI TPC Service Manager 1.0 Does it mean, that the TPC Service is not installed and the programm with shared varibles won't be working or can I start it somehow in another way? Do I need to have TPC service installed on TPC2012?
Until now, I've built the project and sent it through FTP to TPC(the folder was /TEMP) and then started it.
2.Ping works OK
Thank you in advance for any hints how to solve this problem.
Martin

Well no problem, but I'm frustrated with this issue... I've tested many things and nothing. Just to help someone else as I in the future, these are my sources:
http://forums.ni.com/t5/LabVIEW/TPC-2012-Problems-with-shared-variable/m-p/1009631/highlight/false#M...
http://digital.ni.com/public.nsf/allkb/28536DE7E2D9E98B8625770B00738920?OpenDocument
http://zone.ni.com/reference/en-XX/help/372507B-01/lvtpcgsm/tpc_install_sharvar/
http://zone.ni.com/reference/en-XX/help/372507C-01/lvtpcgsm/tpc_install_sharvar/
http://digital.ni.com/public.nsf/allkb/23532363F4905EC28625727A00730B80?OpenDocument
http://forums.ni.com/t5/FieldPoint-Family/TPC-2006-Not-Listed-in-Targets-and-Devices/td-p/566325
http://forums.ni.com/t5/LabVIEW/MAX-can-t-detect-TPC-2106T/td-p/831524
http://zone.ni.com/devzone/cda/tut/p/id/5868
http://digital.ni.com/public.nsf/websearch/28B748B9697B79E18625725A00009066?OpenDocument
http://digital.ni.com/public.nsf/websearch/D1726990DCEB82E4862570F20069C57D?OpenDocument
http://digital.ni.com/public.nsf/allkb/3B469103BBDD4CE48625726000665B36
I hope find some hint..
Fabian León
Certified LabVIEW Associate Developer

Problem with environment variables

JAVA_HOME = C:\JBuilder9\jdk1.4
Path = C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip
When I run foo.java I get this error, which i believe is because of some kind
of problem with environment variables.
Exception in thread "main" java.lang.NoClassDefFoundError: OraThinI eliminated this path
C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin
just to check whether two paths of jdk bin folder is causing problem but I see no change.
Please help

I had solved it myself
I am a genious :P
Just do this
JAVA_HOME = C:\JBuilder9\jdk1.4
CLASSPATH = C:\oracle\product\10.1.0\Db_1\jdbc\lib\classes12.zip;.;%JAVA_HOME%\bin
PATH= C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip;%JAVA_HOME%\bin

Problem in hierarchy variable

hi,
I am facing one problem with hierarchy variable , i created one hierarchy variable with ready for input , mandatory and customer exit as i need some values to be populated in the input screen and write the following exit
when 'ZHV_PCTR' .              IF i_step = 1 .
     clear l_s_range .
     l_s_range-low = 'TEST!'.
     L_S_RANGE-SIGN = 'I'.
     L_S_RANGE-OPT = 'EQ'.
      append l_s_range to e_t_range .
   endif .
but wen the input variable is coming its coming with all the values , even test1 is not appearing .
plz letme know wts happning rong .
thnx

Hello ,
Try this code
DATA: loc_var_range TYPE rrrangeexit,
      l_s_range     TYPE rsr_s_rangesid.
IF i_step = 1.
CASE i_vnam.
    WHEN 'TEST1'.
    CLEAR l_s_range.
     READ TABLE i_t_var_range
            INTO loc_var_range
                 WITH KEY
                 vnam = 'TEST1'.
        IF sy-subrc = 0.
           l_s_range-low = 'TEST1'.
           l_s_range-sign     = 'I'.
           l_s_range-opt      = 'EQ'.
           APPEND l_s_range TO e_t_range.
           l_s_range-low = 'TEST2'.
           l_s_range-sign     = 'I'.
           l_s_range-opt      = 'EQ'.
           APPEND l_s_range TO e_t_range.
    ENDCASE.
ENDIF.
Thanks,
Kishore

Problem related to variable substitution

Dear all ,
I have a query related to variable substitution :
The requirement is that filename should be in the following format : %<store_code>%_%<Date>%_master.xml .
I have done the configuration for Store_code in the variable substitution from Payload .
But I am facing problem related to Date as the requirement is that we should not take the date from the payload . We used "ADDtimestamp" in the file mode creation but it is generating file with time stamp also which doesn;t serve the purpose .
Can somebody suggest how to take the current date without taking it from payload . Does anyone know something about standard current date which I can assign directly to Var2 .
Thanks in advance
Regards
Prabhat

Hi,
In your mapping, have a user defined function which has a bit of Java to get the current date and time and pass back out to a variable.
Here is a code snippet I got in Google to do this :
import java.text.*;
import java.util.*;
public class Dtest {
public static void main(String args[]) {
 SimpleDateFormat df = (SimpleDateFormat)
 DateFormat.getDateInstance(DateFormat.SHORT);
 System.out.println("The short date format is " + df.toPattern());
 Locale loc = Locale.ITALY;
 df = (SimpleDateFormat)
 DateFormat.getDateInstance(DateFormat.SHORT, loc);
 System.out.println("The short date format is " + df.toPattern());
Cheers
Colin.

Help! Problem with using variables/objects

I am writing a method that will create a new object based on a class. Obviously, the following code works:
Line victoria = new Line("Test");
But now I want to be able to put any string I like where victoria is. Something along the lines of:
public void createNewObject(String newObjectName)
Line newObjectName = new Line("Test");
But this won't work because it says I have already named newObjectName.
How can I get it use the value contained WITHIN the string rather than the string itself?
Thank you in advance,
G

Yes. The method signature declares a variable
newObjectName of type String whose scope is the entire
method. So you can't declare another variable with the
same name within the method, as you attempt to do. I
think you want to replace Line newObjectName =
new Line("Test"); with Line newObject =
new Line(newObjectName);Then you'll need to
think about how to make the new object available to
the code which called the method...YATArchivist, thank you for the reply but I don't think it solves the problem.
Your solutions passed the string into the creation of the object but the object name is still static. This mean that if I create another object it will still have the name newObjectName.
Maybe I am approaching the problem incorrectly. Imagine I had a class called Book. If I had a library program and wanted to create more than one book based on the class Book, how could I do it?
Please help me!!!
Thank you,
G

UI Creation / Populating Variables...

I've now moved onto UI creation... What I would like to do is create edittext boxes, which would populate my variables.. I'm having a problem on my first attempt..
// Add a panel to contain the components
win.pnlA = win.add("panel", [10, 10, 400, 450], "Settings");
win.pnlA.displayTextLbl = win.pnlA.add("statictext", [10, 415, 100, 430], "XML Name:");
XMLName = win.pnlA.add("edittext", [100, 415, 225, 430], 'XMLTest5');
var logFile = new File("/c/TEMP/" + XMLName + ".xml");
Most of the rest of the script creates lots more static and edit texts with other panels... My problem is, I'm not sure how to get the result of the edittext (in my example, XMLTest5) to appear in the variable/filename. My filename is unwantingly written as [object EditText].xml
Thanks again for your help.
-Dave

Hi Dave,
Your XMLName variable points to an EditText object. To get its value, you need to reference its text attribute (i.e., XMLName.text).
Jeff

Problem with final variables and inner classes

variables accessed by inner classes need to be final. Else it gives compilation error. Such clases work finw from prompt. But when I try to run such classes through webstart it gives me error/exception for those final variables being accessed from inner class.
Is there any solution to this?
Exception is:
java.lang.ClassFormatError: com/icorbroker/fx/client/screens/batchorder/BatchOrderFrame$2 (Illegal Variable name " val$l_table")
 at java.lang.ClassLoader.defineClass0(Native Method)
 at java.lang.ClassLoader.defineClass(ClassLoader.java:502)
 at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
 at com.sun.jnlp.JNLPClassLoader.defineClass(Unknown Source)
 at com.sun.jnlp.JNLPClassLoader.access$1(Unknown Source)
 at com.sun.jnlp.JNLPClassLoader$1.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sun.jnlp.JNLPClassLoader.findClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
 at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
 at com.icorbroker.fx.client.screens.batchorder.BatchOrderFrame.<init>(BatchOrderFrame.java:217)
 at com.icorbroker.fx.client.screens.batchorder.BatchOrderViewController.createView(BatchOrderViewController.java:150)
 at com.icorbroker.fx.client.screens.RealTimeViewController.initialize(RealTimeViewController.java:23)
 at com.icorbroker.fx.client.screens.batchorder.BatchOrderViewController.<init>(BatchOrderViewController.java:62)
 at com.icorbroker.fx.client.screens.displayelements.DisplayPanel$3.mousePressed(DisplayPanel.java:267)
 at java.awt.Component.processMouseEvent(Component.java:5131)
 at java.awt.Component.processEvent(Component.java:4931)
 at java.awt.Container.processEvent(Container.java:1566)
 at java.awt.Component.dispatchEventImpl(Component.java:3639)
 at java.awt.Container.dispatchEventImpl(Container.java:1623)
 at java.awt.Component.dispatchEvent(Component.java:3480)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3450)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3162)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3095)
 at java.awt.Container.dispatchEventImpl(Container.java:1609)
 at java.awt.Window.dispatchEventImpl(Window.java:1590)
 at java.awt.Component.dispatchEvent(Component.java:3480)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:450)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)

I've also been having the same problem. The only work-around seems to be to slightly change the code, recompile & hope it works. See http://forum.java.sun.com/thread.jsp?forum=38&thread=372291

Problem with final variables and inner classes (JDK1.1.8)

When using JDK1.1.8, I came up with following:
public class Outer
    protected final int i;
    protected Inner inner = null;
    public Outer(int value)
        i = value;
        inner = new Inner();
        inner.foo();
    protected class Inner
        public void foo()
            System.out.println(i);
}causing this:
Outer.java:6: Blank final variable 'i' may not have been initialized. It must be assigned a value in an initializer, or in every constructor.
public Outer(int value)
^
1 error
With JDK 1.3 this works just fine, as it does with 1.1.8 if
1) I don't use inner class, or
2) I assign the value in initializer, or
3) I leave the keyword final away.
and none of these is actually an option for me, neither using a newer JDK, if only there is another way to solve this.
Reasons why I am trying to do this:
1) I can't use a newer JDK
2) I want to be able to assign the variables value in constructor
3) I want to prevent anyone (including myself ;)) from changing the value in other parts of the class (yes, the code above is just to give you the idea, not the whole code)
4) I must be able to use inner classes
So, does anyone have a suggestion how to solve this problem of mine? Or can someone say that this is a JDK 1.1.8 feature, and that I just have to live with it? In that case, sticking to solution 3 is probably the best alternative here, at least for me (and hope that no-one will change the variables value). Or is it crappy planning..?

You cannot use a final field if you do not
initialize it at the time of declaration. So yes,
your design is invalid.Sorry if I am being a bit too stubborn or something. :) I am just honestly a bit puzzled, since... If I cannot use a final field in an aforementioned situation, why does following work? (JDK 1.3.1 on Linux)
public class Outer {
        protected final String str;
        public Outer(String paramStr) {
                str = paramStr;
                Inner in = new Inner();
                in.foo();
        public void foo() {
                System.out.println("Outer.foo(): " + str);
        public static void main( String args[] ) {
                String param = new String("This is test.");
                Outer outer = new Outer(param);
                outer.foo();
        protected class Inner {
                public void foo() {
                        System.out.println("Inner.foo(): " + str);
} producing the following:
[1:39] % javac Outer.java
[1:39] % java Outer
Inner.foo(): This is test.
Outer.foo(): This is test.
Is this then an "undocumented feature", working even though it shouldn't work?
However, I assume you could
get by with eliminating the final field and simply
passing the value directly to the Inner class's
constructor. if not, you'll have to rethink larger
aspects of your design.I guess this is the way it must be done.
Jussi

Problem with bind variable

Hi,
I need to get bind variables on SIEBEL to test the performance of query and my problem is on BIND :3 because it's impossible to interprete this.
NAME     POSITION     LAST_CAPTURED     VALUE_STRING
:1     1,00     02/17/2010 11:54:25     1-15BVYY
:2     2,00     02/17/2010 11:54:25
:3     3,00     02/17/2010 11:54:25     W1B 1AH%
:1     1,00     02/17/2010 12:48:04     1-15BVYY
:2     2,00     02/17/2010 12:48:04
:3     3,00     02/17/2010 12:48:04     TQ3 3BJ%
Thanks for your help

I have no erros.
I just want to get the real value of bind variable to run my query, but the problem is on bind 2.
When i run this
select name,position,last_captured,value_string
from DBA_HIST_SQLBIND
where sql_id='&SQLID'
i obtain this
NAME     POSITION     LAST_CAPTURED     VALUE_STRING
:1     1,00     02/17/2010 11:54:25     1-15BVYY
:2     2,00     02/17/2010 11:54:25
:3     3,00     02/17/2010 11:54:25     W1B 1AH%
:1     1,00     02/17/2010 12:48:04     1-15BVYY
:2     2,00     02/17/2010 12:48:04
:3     3,00     02/17/2010 12:48:04     TQ3 3BJ%
What is the value of bind :2
Thanks

Problem creation of variable

Similar Messages

Maybe you are looking for