Doubts on calibration process

Hi,
I AM DOING CALIBRATION PROCESS FOR THE FIRST TIME. The process i followed is:
IE01:Equipment
IP11: Maintainence Strategy
IA05: Task List
IP42: Maintainence Plan
IP10: Scheduling Of plan
IP30: Job Planning
Above this i have assigned Inspection type 14 to PM order type for calibration.
My doubt is:
1) Is the process that I am following is correct.
2) If yes, then after I schedule the orders by IP10, Do i need to relese the orders manually in IP10 or do the orders are made & released automatically when I execute IP30. Please let me know what is the process.
3) If i reject the MIC in result recording does the order still get the status of TECO as it gets when i accept the UD.
4) Do the maintainence orders get generated automatically after executing IP30 automatically.
PLease respond, I will award points.
Regards
Ashish Khurna

hi
Following is the pre requisite for calibration orders.
Maintain the inspection type 014 in customising (done by QM consultant)
Assign Inspection type 014 to order type PM05 in customising.
Maintaing the following master data:
Create Master inspection charecteristics
Maintain sampling procdedure
Tasklist with inspection point as 300 for equipment
Assign inspection charectersitics to operations
Maintain catalogs for results recording / usage decision
Create Maintenance Plan
Schedule the maintenance plan
Calibration orders would be generated
release and inspection lt will be created
Check through Tcode QA32 and process the inspection lot - results recording, usage decision
Trust this may help you.
Regards,
E-Jad

Similar Messages

Configuration of calibration process

sir i am new in sap pm.my boss given me a task that how to configure a calibration process in sap pm.i have seen on scn or google but i didn't get any document related to that please help me to configure a calibration process in sap.if you have any pdf or doc file then please share it to me.

Hi
It is a Huge data but Inshort I can tell you
1.Create Equipment using IE01
2.Create task list in IA01/IA05
3.Create Maintainance plan using IP01
schedule the equipment in the same with fix cycle.
4.Schedule through IP30.
Also In customization against PM order define the Inspection lot origin 14
After scheduling Inspec lot of 14 will be created
Then Do RR & DR
This is how it will be used
REgrads
Sujit

QM & PM Calibration Process Configuration

Hi
I wanted to configure a calibration process. I have made the settings for PM and QM integration but unfortunately in our implementation QM is not in scope but I need to do the QM settings which will be required for calibration. Can anyone provide me a configuration document for calibration process which contains the settings for QM as well as for PM.
Thanks a lot for help.
Thanks & Regards
Vineet

Dear Vineet,
In QM SPRO you have to assign inspection type 14which is for inspection in plant maintenance. Also you have to maintain number range for this. most of work in calibration belongs to PM only.
Following is the flow:
1) IE01 : Create test quuipment.
2) QDV1: Create sampling procedure for plant mentenance.
3) IP42 : Create maintenance plan for equipment.
4) IA01 : Create equipment task list.
5) IP02 : Assign task list to maintenance plan.
6) IP10 : Schedule maintenance plan.
6) IP30 : Deadline monitoring of maintenance plan.
7) IP24 : Viewing schedule for calibration with order released.
8) QE71 / QE53 : Calibration Result recording and UD.
This is the way i have mapped the calibration process.
Hope this will help you.
BR
Shekhar

How to maintain calibration process in qm

sir,
i am new in qm module n and i m going to implement for qm module.
so pl tell how i maintain qm configuration data n calibration process of qm.

Hi
It is a Huge data but Inshort I can tell you
1.Create Equipment using IE01
2.Create task list in IA01/IA05
3.Create Maintainance plan using IP01
schedule the equipment in the same with fix cycle.
4.Schedule through IP30.
Also In customization against PM order define the Inspection lot origin 14
After scheduling Inspec lot of 14 will be created
Then Do RR & DR
This is how it will be used
REgrads
Sujit

Equipment calibration process

Hi experts,
in equipment calibration process we have created a plan and scheduled.
maintenance order with inspection lot created.Calibration completed and closed.
But for the next calibration due date again we have to save the schedule (IP10)
in order to create maintenace order with inspection lot automatically by the system.
is there any solution for this problem so that we don't have to save the schedule again and again to create maintenance order automatically ? Plz answer.

When you create a maintenance plans for calibration in the third tab you will find sort field, define one sort field specific to calibration in configuration and attach it with your all calibration plans. Now after completing the calibration work don't forget to run the dead line monitoring program. Simple select the sort field and execute it will not take more than a min and all your next planned dates will be adjusted automatically
Regards,
EJ

Calibration process

Dear Friends,
I am new to SAP PM module. I wish to do calibration process by using measurement document. Hence I created measurement document for the respective equipment with the annual estimate and counter reading. I created the maintenance plan based on counter and schedule it. While scheduling , notification has been created in the background and from that notification I wish to create calibration order. At that time of creation, the information in the notification copied to the order but the information regarding maintenance plan alone has not copiied into the order. Therefore, while releasing the order inspection lot has created in the background but there is no characteristics attached to the lot. So I can't do the result recording for the particular lot.
Can any one solve this issue?
Regards
Karthik

Hi Karthik,
I guess that you have posted the thread in the wrong Forum,
any ways the key to the Calibration Process is the Task List that you have to define in the Maintenance Order,
you need to define the Inspection point in the Task List as 300, then the system will give you another Tab in the Operations as the Master Inspection Characteristics.
there you give in your MIC no.
can you please tell me in detail where you are getting Stuck ?
Regards,
Yawar Khan

A doubt in the process of NW2004 .

Hi,experts:
      I have installed NW04 succesfully ,but i still have doubt in my installing process :
      In the tree where all the components to be installed are listed , I found there are two nodes at the root level , one is "JAVA ADD-IN FOR ABAP",the other is 'JAVA SYSTEM' , What different is between them ? "JAVA ADD-IN FOR ABAP" means J2EE engine will stay in the same server as APAP engine , while 'JAVA SYSTEM' means J2EE engine will be standalone ???
BTW, How can make i know which mode is my current WAS installed ?
thank in advance!
Message was edited by: guixin chen

Yes that is correct.   Java ADD-IN is installed on the same system as the ABAP system, it is adding in after the ABAP installation.   The Java System is a standalone and does not need the ABAP system along side.
Regards,
Rich Heilman

Doubt about intercompany process

hello sd gurus
1) I have a doubt in intercompany scenario...we treat customer is an internal customer...so what does it mean and the sister comapny deliver the goods to parent company or customer directly....plz clarify my doubt....
2) in third party process sceanario...how the company knows the vendor has supplied this much of quantity....i know one thing that is miro and billing relevance is (F)....and is there any other answer for this question...if any answer plz let me know......
3) what ever i post the question u guys are saying the answers...so how can i make reward points to u....whats the process to give reward points...
Thanking you

Hi Ram,
1) In my view actually in third party process migo should not happen ....directly the vendor send goods to customer ...so by miro we can understand how much quantity he has sended....there is no migo.so how can we understand through migo...
A) We do MIGO in third party sale,it is a proof for deliverd goods to the customer.even we do MIGO,based on the MIRO quantity ordering company bill to the customer.
2) Internal customer:
A) For intercompany sales we take 1 example-
Ordering company-1000
Delivering company-2000
External customer-10050
Internal customer-1000 (Ordering company)
here external customer will raise the order to ordering company.the goods are delivered from the delivering company,but this delivering company will not bill to the external customer.so this delivering company(2000) has to bill ordering company(1000).here payer for delivering company is ordering company.so that we have to create a payer master record by the name of ordering company and it has to assign in intercompany sales menu path.
so that while creating intercompany the system automatically determines the payer master not external customer.
I hope you understood.
Thank you,

Preventive maintenance and calibration process flow

Hi Experts,
I am totally new to Plant Maintenance. My client has the below requirements.
1) Machine preventive maintenance schedule.(monthly/yearly)
2) Measuring instruments Calibration.
3) Maintenece schedules of PRT/Test equipment.
How to manage all the above requirements. Would be of great help if expalined the entire process flow in detail.

You can refer following SAP help link to get intro idea about same topic:
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm]
SDN discussion:
[Claibration in sap;
[Calibration Order Process]

Calibration process : inspection lot not created

Hello,
When creating a maintenance order (PM05) , i can not get the inspection lot created .
There has been some thread about this process , i believe i followed the instructions :
-equipment category is production ressource/tool
-master inspection characteristics created (released)
-sampling procedure created for PM
-equipment task list created with inspection point at header level , with control key including inspection characteristic , with master inspection characteristic , with sampling procedure
-configuration for inspection type and order type is done
then when creating the order manually (or via a maintenance plan) : the order is created and released but with no inspection lot assigned...
does anyone have an idea where the error might come from?
Thanks again,
Pete

Hi Pete
Weather this is correct or not for your scenario but please check the below spro setting.
Plant Maintenance and Customer Service --> Maintenance and Service Processing --> Functions and Settings for Order Types --> Assign Inspection Types to Maintenance/Service Order Types
click on the symbol
in Change view " Assign Inspection Types to Maintenance/Service Order Types" :Overview screen assign inspection type against plant and order type combination. for PM 14 is inspection type.
please confirm.
regds,
Venkat

Error in calibration process

Hi, PM experts,
I have created one calibration plan for only one test equipment & scheduled it.Also before that in the task list I have maintained one operation & against it I have maintained only one MIC as per requirement.
Now during Result Recording of the generated inspection lot , system giving messaage that "you have not completed all characteristics" & also it is asking to specify the equipment as I have maintained only one equipment in maintenance plan , it should flow automatically.When I am doing valuation , system even not allowing to do result recording throughing message that "selected set not maintained" while it is already created.
Can anybody please explain about these errors in details?
thanks in advance
rgds
rajib

hi
Since you have maintained the inspection point in the task list ,while entering the result it will ask for the same ,kindly use the F4 help it will automatially populated
kindly checek whether the correct sampling procedure has assigned to the Master inspection characteristic
regards
thyagarajan

Doubt regarding viewOptions.Process

Hi Everyone,
I am trying to call a workflow from a form.I thought of using the viewOptions.process for this. Can the viewOptions.process functionality be used for calling a workflow from any form or is it just for use through Active Sync forms?
The code that i have written is as follows:
<Field name='viewOptions.Process'>
<Expansion>
<s>Test Create User</s>
</Expansion>
</Field>
This is the only field in my form. On running the workflow which is calling this form "Test Create User" workflow is not getting launched.Is there anything else i need to set in the form apart from this field or any other configuration changes that have to made else where.
The task is getting suspended and the workflow status shows that it is under pending approval of the owner Configurator.
Any help in this regard would be greatly appreciated.
Thanks in advance,
Partha

Dear SAP Consultant,
Whenever you create a message it gives a pop-up whether it is message on success of on errors. When you check errors, it will take you to another screen wherein you mention your email id in 'recipient list'. And you can document anything you want in 'edit document'
You must have created mesaage on errors in process chain. Now if a process chain failes you will definately get a message.
Hope this helps you.
Thanks,
Nabha

Post gage calibration process

Hi, Please advise how to map the following in sap qm: gages calibrated by external company, after recieving in our premises, we found that the gage needs some adjustment to maintain the accuracy (based on test or calibration report). meaning again we need to send the gage to service provider to repair it and then we need to keep it in our inventory. pls advise.

closed

DOUBT ON RDA PROCESS AND UPLOAD TYPES?

Hi all:
I have two queries:
1. What is RDA process and how it works?
2. What is the basic difference between a Full upload and a Delta upload?
Thanks in advance.
- Arun yadav

Hi Arun,
RDA - is the real time data acquisition function as part of netweaver BIs (BI7), so when data is created in R/3 or CRM it is synchrosnised into BI. There is a good article on searchsap for this.
A Full load is everything from scratch, which is carried out each time unless you have a pseudo delta.
A delta is changed or new data that is extracted when you have carried out an intiailisation (which is in effect a first ever load).
I am sure there must be something in here if you search or at least saphelp for RDA especially.
Hope that helps,
thanks Geoff.

Doubt in Implementation Process.

Hi BW Experts,
I was working in Production support for the past 1 year.Now i got an opportunity to work in Implementation.Will you guys, please tell me what is the process adopted when starting the Implementation.And what are the docs that has to prepare ?
Thanks,
Jelina.

Jelina,
BW Implementation starts with the requirements gathering process. That involves identification of the report requirements and the layout of those. Once that is done as-is and to-be scenarios are clearly analyzed and the realization starts.
Give a search for ASAP methodology which is the roadmap for the implementation.
In synopsis u will be involved in
Requirements gathering,
Function specs design
Logical Models Design
Technical specs (High level and Low level)
and after that once u ensure all the infrastructure is ready, u will start of the development process. Everything is done in phased manner and clear documentation helps u to track the implementation.
thanks.

Doubts on calibration process

Similar Messages

Maybe you are looking for