Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred

Hi all,
I have a scenario MAIL TO PROXY, and i would like to receive incorrect xml files and send an answer telling this error.
My problem is in the receiver determination, an error is produced as "Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred".
Is there any way to solve this and send an email as an answer?

Hi,
Can you provide the whole error message ?
Check out this thread : Re: Error in Receiver Determination
Thanks,
Pooja Pandey

Similar Messages

"Problem evaluating a condition" at Receiver Determination

Hi,
I've created a complex mail to rfc interface, in which, message is being send as mail attachment and service inbound interface has multiple operations (each for corresponding rfc).
at Receiver Determination, rule was created with multiple conditions, in order to determine correct "Communication Component" (multiple receiver agreement and interface determination were created to supported this "multi interfaces" scenario).
If no receiver was found message is ignored.
once in a while, bad non-xml messages (e.g., "asdfasdfasdfffdfdsasdf") are being send, is this case, while PI is trying to determining the receiver (i.e., evaluate Receiver Determination conditions) exception is being thrown, message is therefor has system error status* (at sxmb_moni) and it can not be ignored (as i wanted it to be).
how can i workaround this problematic scenario?
Regards
Uri
*Error message (sxmb_moni)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem evaluating a condition: An exception has occurred.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem evaluating a condition: An exception has occurred. Problem evaluating a condition: An exception has occurred. An exception has occurred. An exception has occurred. An exception has occurred. An exception has occurred. An exception has occurred. Problem extracting values from the Payload: Check line 2 column 1 of the XML document</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Abhishek,
10x for your replay, but as far as i understand this is exactly the case here.
conditions are:
cond1: (/rfc: RFC1 ~ *)
cond2: (/rfc: RFC2 ~ *)
this works as expected in cases of xml messages (in case no cond is satisfied) message is ignored. but, in case of non-xml message exception is being thrown while cond is assessed.
Regards
Uri

Problem evaluating a condition

Hi
I'm getting an error in the receiver determination when I'm using a context object.
The error is "Problem extracting values from the Payload: Check line 2 column 1 of the XML document".
This is my paylod
"<?xml version="1.0" encoding="utf-8"?>
<ns:MT_XML_UNF xmlns:ns="http://dddd.com/XI/dddd">
     <MESSAGE>
          <TYPE>S</TYPE>
          <BODY>x</BODY>
     </MESSAGE>
</ns:MT_XML_UNF>
Can somebody explain me witch one is line 2 column 1 and maybe what is the problem?
Florin

> "<?xml version="1.0" encoding="utf-8"?>
> <ns:MT_XML_UNF xmlns:ns="http://dddd.com/XI/dddd">
>      <MESSAGE>
>           <TYPE>S</TYPE>
>           <BODY>x</BODY>
>      </MESSAGE>
> </ns:MT_XML_UNF>
Check the condition in the Receiver Dertermination...also check you paylod value and Type should match with the condition.

Can't view my user control in the designer (An Unhandled Exception has occurred)

I'm using VS 2012, looking at some code I wrote some time ago. For some reason I cannot view the XAML in the design view, only the XAML view. I'm getting an error that says, "An Unhandled Exception has occurred". I can compile the solution fine,
but it won't let me view it. I don't know why I can't view it in the designer. Here's the error details:
Microsoft.Expression.DesignHost.Isolation.Remoting.RemoteException
Object reference not set to an instance of an object.
   at System.Windows.StyleHelper.FindNameInTemplateContent(DependencyObject container, String childName, FrameworkTemplate frameworkTemplate)
   at System.Windows.TemplateNameScope.System.Windows.Markup.INameScope.FindName(String name)
   at MS.Internal.Data.ElementObjectRef.GetObject(DependencyObject d, ObjectRefArgs args)
   at MS.Internal.Data.ObjectRef.GetDataObject(DependencyObject d, ObjectRefArgs args)
   at System.Windows.Data.BindingExpression.MS.Internal.Data.IDataBindEngineClient.VerifySourceReference(Boolean lastChance)
   at MS.Internal.Data.DataBindEngine.Task.Run(Boolean lastChance)
   at MS.Internal.Data.DataBindEngine.Run(Object arg)
   at MS.Internal.Data.DataBindEngine.OnLayoutUpdated(Object sender, EventArgs e)
   at System.Windows.ContextLayoutManager.fireLayoutUpdateEvent()
   at System.Windows.ContextLayoutManager.UpdateLayout()
   at System.Windows.UIElement.UpdateLayout()
   at System.Windows.Interop.HwndSource.SetLayoutSize()
   at System.Windows.Interop.HwndSource.set_RootVisualInternal(Visual value)
   at System.Windows.Interop.HwndSource.set_RootVisual(Visual value)
   at Microsoft.Expression.DesignHost.Isolation.Remoting.RemoteUIElement.<>c__DisplayClass12.<Microsoft.Expression.DesignHost.Isolation.Remoting.IRemoteUIElement.CreateContent>b__11()
   at Microsoft.Expression.DesignHost.Isolation.Remoting.ThreadMarshaler.<>c__DisplayClass16`1.<MarshalIn>b__15()
   at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.Call.InvokeWorker()
   at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.Call.Invoke(Boolean waitingInExternalCall)
   at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.InvokeCall(Call call)
   at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.ProcessQueue(CallQueue queue)
   at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.ProcessInboundAsyncQueue(Int32 identity)
   at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.ProcessMessage(Int32 msg, IntPtr wParam, Boolean elevatedQuery, Boolean& handled)
   at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.OnWindowMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   at Microsoft.Expression.DesignHost.Isolation.Remoting.MessageOnlyHwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
   at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
   at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
   at System.Windows.Threading.Dispatcher.Run()
   at System.Windows.Application.RunDispatcher(Object ignore)
   at System.Windows.Application.RunInternal(Window window)
   at System.Windows.Application.Run(Window window)
   at Microsoft.Expression.DesignHost.Isolation.IsolationProcess.RunApplication()
   at Microsoft.Expression.DesignHost.Isolation.IsolationProcess.<>c__DisplayClass2.<Main>b__0()
   at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
Rod

I stopped when I saw stuff about databinding.
I guess your problem is you have code in your constructor.
A prameterless constructor of a view will be called by the designer.
This is probably trying to use things which aren't there at design time.
You can mock them or just exit out the constructor if you're in the designer.
public YourUserControlConstructor()
InitializeComponent();
if (DesignerProperties.GetIsInDesignMode(this)
return;
// Dependent code which produces errors
http://social.technet.microsoft.com/wiki/contents/articles/29874.wpf-tips-designer-detection.aspx
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.

SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010

Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Unhandled exception has occurred in your application C#

I am getting this error when I run my c# program for about 30 mins: IMAGE LINK
This is what the Details box contains:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
****** Exception Text ******
System.NullReferenceException: Object reference not set to an instance of an object.
at WindowsFormsApplication1.Form1.button6_Click(Object sender, EventArgs e)
at WindowsFormsApplication1.Form1.button7_Click(Object sender, EventArgs e)
at WindowsFormsApplication1.Form1.timer2_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
****** Loaded Assemblies ******
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34014 built by: FX45W81RTMGDR
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
instagram Robot
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/kingd_000/Desktop/Instagram%20Robot/Instagram%20Robot/instagram%20Robot.exe
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34239 built by: FX452RTMGDR
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
SKGL
Assembly Version: 2.0.4.1
Win32 Version: 2.0.4.1
CodeBase: file:///C:/Users/kingd_000/Desktop/Instagram%20Robot/Instagram%20Robot/SKGL.DLL
Microsoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 12.0.20806.33440 built by: FX45W81RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
Microsoft.mshtml
Assembly Version: 7.0.3300.0
Win32 Version: 7.0.3300.0
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.mshtml/7.0.3300.0__b03f5f7f11d50a3a/Microsoft.mshtml.dll
****** JIT Debugging ******
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I have no idea how to fix this problem and am hoping someone here will be able to find out how to fix this problem. Thanks in Advance!

I still have no idea how to fix this problem, I tried @Joel_Engineer and @Armin_Zingler's suggestions but it did not work.
This is really frustrating so I am going to show you all of my code:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Timers;
using System.Collections;
using System.Diagnostics;
using insta;
namespace WindowsFormsApplication1
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
webBrowser1.Navigate(textBox1.Text);
private void webBrowser1_Navigated(object sender, WebBrowserNavigatedEventArgs e)
textBox1.Text = webBrowser1.Url.ToString();
private void button3_Click(object sender, EventArgs e)
webBrowser1.Refresh();
private void button2_Click(object sender, EventArgs e)
webBrowser1.GoBack();
private void button4_Click(object sender, EventArgs e)
webBrowser1.GoForward();
private void button5_Click(object sender, EventArgs e)
webBrowser1.GoHome();
private void webBrowser1_DocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e)
webBrowser1.ScriptErrorsSuppressed = true;
private void button6_Click(object sender, EventArgs e)
webBrowser1.Refresh();
//sleep for 5 seconds
DateTime Tthen = DateTime.Now;
do
} while (Tthen.AddSeconds(5) > DateTime.Now);
webBrowser1.Refresh();
HtmlElementCollection classs = webBrowser1.Document.All;
foreach (HtmlElement element in classs)
if (element.GetAttribute("className") == "ontainer")
button7_Click(sender, e);
webBrowser1.Document.Window.ScrollTo(0, 500);
//sleep for 5 seconds
DateTime Tthen2 = DateTime.Now;
do
Application.DoEvents();
} while (Tthen2.AddSeconds(5) > DateTime.Now);
if (checkBox2.Checked)
text.Text = "Click";
webBrowser1.Document.GetElementById("utton").InvokeMember("click");
text.Text = "Comment";
//sleep for 5 seconds
DateTime Tthen3 = DateTime.Now;
do
Application.DoEvents();
} while (Tthen3.AddSeconds(5) > DateTime.Now);
var foo = new string[4] { Comment.Text, Comment2.Text, Comment3.Text, Comment4.Text };
Random r = new Random();
int X = r.Next(0, foo.Length);
HtmlElement textArea = webBrowser1.Document.All["t_text"];
if (textArea != null)
textArea.SetAttribute("value", (foo[X])); ;
//sleep for 5 seconds
DateTime Tthen4 = DateTime.Now;
do
Application.DoEvents();
} while (Tthen4.AddSeconds(5) > DateTime.Now);
text.Text = "Click";
HtmlElementCollection classButton = webBrowser1.Document.All;
foreach (HtmlElement element in classButton)
if (element.GetAttribute("className") == "button")
element.InvokeMember("click");
//sleep for 5 seconds
DateTime Tthen5 = DateTime.Now;
do
Application.DoEvents();
} while (Tthen5.AddSeconds(5) > DateTime.Now);
text.Text = "Click";
if (checkBox1.Checked)
HtmlElementCollection links = webBrowser1.Document.GetElementsByTagName("a");
foreach (HtmlElement link in links)
if (link.OuterHtml.ToString().Contains("aor"))
link.InvokeMember("click");
text.Text = "Click";
//sleep for 5 seconds
DateTime Tthen6 = DateTime.Now;
do
Application.DoEvents();
} while (Tthen6.AddSeconds(5) > DateTime.Now);
webBrowser1.Document.GetElementById("fow").InvokeMember("click");
//sleep for 5 seconds
DateTime Tthen7 = DateTime.Now;
do
Application.DoEvents();
} while (Tthen7.AddSeconds(5) > DateTime.Now);
webBrowser1.Navigate("http://www.A-WEBSITE.com");
text.Text = "Start";
progressBar1.Value = 0;
progressBar1.Maximum = Convert.ToInt32(numericUpDown1.Value);
timer2.Start();
private void buttonloginpage_Click(object sender, EventArgs e)
webBrowser1.Navigate("https://A-WEBSITE.com/");
private void Hash1_TextChanged(object sender, EventArgs e)
private void Form1_Load(object sender, EventArgs e)
private void button7_Click(object sender, EventArgs e)
text.Text = "Searching";
var foo = new string[4] { Hash1.Text, Hash2.Text, Hash3.Text, Hash4.Text };
Random r = new Random();
int hash = r.Next(0, foo.Length);
webBrowser1.Navigate("https://A-WEBSITE" + (foo[hash]) + "/");
//sleep for 5 seconds
DateTime Tthen7 = DateTime.Now;
do
Application.DoEvents();
} while (Tthen7.AddSeconds(5) > DateTime.Now);
HtmlElementCollection links = webBrowser1.Document.GetElementsByTagName("a");
foreach (HtmlElement link in links)
if (link.OuterHtml.ToString().Contains("mageLink"))
link.InvokeMember("click");
//sleep for 5 seconds
DateTime Tthen8 = DateTime.Now;
do
Application.DoEvents();
} while (Tthen8.AddSeconds(5) > DateTime.Now);
webBrowser1.Document.Window.ScrollTo(0, 300);
button6_Click(sender, e);
private void label4_Click(object sender, EventArgs e)
private void label5_Click(object sender, EventArgs e)
private void label6_Click(object sender, EventArgs e)
private void label7_Click(object sender, EventArgs e)
private void label8_Click(object sender, EventArgs e)
private void label9_Click(object sender, EventArgs e)
private void label10_Click(object sender, EventArgs e)
private void timer2_Tick(object sender, EventArgs e)
progressBar1.Increment(1);
if (progressBar1.Value >= progressBar1.Maximum)
timer2.Stop();
button7_Click(sender, e);
private void button8_Click(object sender, EventArgs e)
private void text_TextChanged(object sender, EventArgs e)
private void button8_Click_1(object sender, EventArgs e)
webBrowser1.Navigate("http://www.A-WEBSITE.com");
private void stop_Click(object sender, EventArgs e)
private void label6_Click_1(object sender, EventArgs e)
private void Comment_TextChanged(object sender, EventArgs e)
private void Hash3_TextChanged(object sender, EventArgs e)
private void Hash4_TextChanged(object sender, EventArgs e)
private void Hash2_TextChanged(object sender, EventArgs e)
private void label2_Click(object sender, EventArgs e)
private void button8_Click_2(object sender, EventArgs e)
Form2 f2 = new Form2();
f2.Show();
this.Hide();
It's really weird because the program works for about 30 mins or more but then the error shown above pops up randomly.
I really hope someone will be able to figure out why I am getting the Unhandled exception had occurred in your application error.

Premiere Pro CS6 - A low level exception has occurred in ImporterMPEG

Hi Adobe Community,
I'm having a bit of an issue with the ImporterMPEG.prm plugin for Premiere Pro CS6 that's causing playback and exporting issues.
Computer Specs: Win7 PC, NVIDIA GeForce 6150SE nForce 430 graphics card
Description: After playing back video for a while, Premiere will eventually start repeatedly reporting "A low level exception has occurred in ImporterMPEG". The preview player will be completely frozen, and I'll be unable to export. The exporting will fail with a generic "Unexpected error" message.
This issue has only started a week ago. Until now, I've been able to use Premiere Pro CS6 with no issues. If possible, I'd like to avoid upgrading to CC 2014, because the CS6 version was working fine before.
So far, I've tried a few things:
• Deactivating and reactivating (which, by the way, apparently doesn't help subscription users like me, per my recent chat with Adobe support on this issue)
• Uninstall and reinstall (I didn't know about the CC Cleaner tool at the time, so I haven't tried a clean uninstall yet)
• Change the Preview File Format in Sequence Settings (from I-Frame Only MPEG which had worked since I installed the software over a year ago to Microsoft AVI)
• Crying silently to myself (this did not help, the computer is cold and cruel)
• Clearing out the media cache (which I'd never done before and let it get up to ~75GB without me noticing)
• Moving the plugin from its location in Program Files, hoping that maybe Premiere Pro would notice it was missing and to try to find a new fresh one (it didn't work)
So far, only the Preview File Format change seemed to bring relief, but the bad behavior came back after about a week.
I'm thinking maybe the ImporterMPEG.prm plugin got corrupted somehow? The one notable thing I can remember with the computer in the last few weeks was a power event that shut down my computer unexpectedly. I think I had Premiere Pro open at the time.
If it's relevant, I mostly work with .AVI, .MP4, and .TS files in my projects, all varying resolutions and FPS. I'm usually working with about 1GB of files in a project, very rarely more than 2GB.
Has anyone else had this issue? Or, even better, has anyone else resolved this issue?
Thanks!

But really, the real solution for me was to not update Premiere Pro CS6 after a reinstall. The most recent updates just do not like my computer, I guess.
Figured I should post this solution here in case anyone in the future has this problem. (relevant: xkcd: Wisdom of the Ancients)
-Sam

BPM error: exception cx_merge_split occured,object FLOWITEM method EXECUTE

Hi Guys
I am working on a interface involving BPM.....
I am facing this problem while executing the interface...
I am getting error texts as below:
exception cx_merge_split occured,
object FLOWITEM method EXECUTE
I am trying to fix it....Please provide any iputs on this...
Thanx in adavance.

Is your Transformation step designed for multimapping (n:1 or 1:n)?
If yes the payload seems to be incorrect....did you check the working of your mapping (MM/ IM) using the expected payload structure...
the transformation step in BPM has been given exception as System Error
There is one block step before the transformation step...in which exception is not given...?can this be the cause??
Does it mean...you have a Block step in your BPM and your Transformation Step is placed in it....the Block should have an exception handling branch...have the exception handling logic as per your need....the Block step needs to use Exception Handler...same Handler to be used in the Transformation Step's System Error section.
Press F7 and check if your BPM is giving any warning message.
Regards,
Abhishek.

"Internal error: An unexpected exception has occurred" error message displayed when browsing a cube.

“Internal error: An unexpected exception has occurred“ error message displayed when browsing a cube.
The error behaviour is quite irregular and does not occur for specific condition.
Will cumulative update 9 for SQL Server 2008 R2 (SP1) installation help to fix the issue which is provided on the below link:
(http://support.microsoft.com/kb/2152148)
The current version of SQL Server I am using is as below:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
Thanks in advance for the help!

Hi Mon,
The hotfix you said is for Microsoft SQL Server 2008. So it will not work on your scenario since you are using SQL Server 2008 R2.
Based on the limited information, we cannot give you the exact reason that cause this issue. In order to narrow down this issue, you can apply the latest Service Pack and Cumulative Update as GregGalloway said. Besides, you can troubleshoot this issue by
using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Regards,
Charlie Liao
TechNet Community Support

An exception is occurred after importing of substitutions

Hi.
I have extended some view objects, create substitutions in jpx-file and after import them to MDS repository (for instance, AVOEx extends AVO, BVOEx extends BVO). It works fine on my local machine. After that I have deployed AVOEx and BVOEx to server which uses same database. An exception is occurred:
oracle.apps.fnd.framework.OAException: oracle.jbo.PersistenceException: JBO-26000: A Generic exception occurred during loading Customizations.
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1145)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1408)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2664)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1667)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:504)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:425)
     at oa_html._OA._jspService(_OA.java:88)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
java.lang.IndexOutOfBoundsException: Index: 146, Size: 145
     at com.sun.java.util.collections.ArrayList.RangeCheck(ArrayList.java:492)
     at com.sun.java.util.collections.ArrayList.set(ArrayList.java:322)
     at oracle.jbo.server.ViewDefImpl.resolveDefInternal(ViewDefImpl.java:2478)
     at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:2333)
     at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:1909)
     at oracle.jbo.server.MetaObjectManager.loadFromXML(MetaObjectManager.java:509)
     at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:456)
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:313)
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:269)
     at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:649)
     at oracle.jbo.server.ViewDefImpl.findDefObject(ViewDefImpl.java:376)
     at oracle.jbo.server.ApplicationModuleImpl.createViewObject(ApplicationModuleImpl.java:3189)
     at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.createViewObject(OAApplicationModuleImpl.java:1008)
and so on.
Anybody knows why this exception is occurred?
Is there any way to solve my problem?
Thanks in advance
--keo

Yes, I am working with OIE.
This method has been copied from decompiled DetailAMImpl and exception is occurred there during view object creating.
java.lang.IndexOutOfBoundsException: Index: 146, Size: 145
     at com.sun.java.util.collections.ArrayList.RangeCheck(ArrayList.java:492)
     at com.sun.java.util.collections.ArrayList.set(ArrayList.java:322)
     at oracle.jbo.server.ViewDefImpl.resolveDefInternal(ViewDefImpl.java:2478)
     at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:2333)
     at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:1909)
     at oracle.jbo.server.MetaObjectManager.loadFromXML(MetaObjectManager.java:509)
     at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:456)
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:313)
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:269)
     at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:649)
     at oracle.jbo.server.ViewDefImpl.findDefObject(ViewDefImpl.java:376)
     at oracle.jbo.server.ApplicationModuleImpl.createViewObject(ApplicationModuleImpl.java:3189)
     at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.createViewObject(OAApplicationModuleImpl.java:1008)
     at oracle.apps.ap.oie.server.DetailAMImpl.getOneReceiptBasedVO(DetailAMImpl.java:3925)
     at oracle.apps.ap.oie.server.DetailAMImpl.getDetailLineVO(DetailAMImpl.java:360)
     at oracle.apps.ap.oie.server.DetailAMImpl.initDetailLinesVO(DetailAMImpl.java:654)
     at oracle.apps.ap.xxoie.webui.XxCashAndOtherListCO.processFormRequest(XxCashAndOtherListCO.java:159)
--keo

SAVE_TEXT (an exception (cx_sy_no_handler) occurred)

Hi Abapers,
I am facing a problem when using SAVE_TEXT inside a BADI. In debugging mode, when the program control comes on Call Function 'Save_Text' statement and I press 'F5' or 'F6', it shows me a message 'an exception (cx_sy_no_handler) occurred'.
I think I need to write above call function statement inside 'Try-Catch'. But I am not aware which exception should be catched in the Catch statement.
All the parameters I am passing to Save_Text are perfect. The object-id, the text to be updated, all the flags (insert / save_mode/ etc.) are correct. Actually when I execute Save_Text from SE37, its working properly.
I hope that 'Try-Catch' approach would be required.
Please provide solution.
Thanks in advance.

Hello,
The problem is with type compatibility. Check the parameters you r passing to function module. i.e. the parmeter you r passing and the function module Input parameters should have same type.
Regards,
Sreeni.

Exception has occurred during data insertion ... Wrong number of parameters

I am using an ADO dataflow source and an ADO dataflow destination to move data from a table on an IBM iSeries DB2 database to another IBM iSeries DB2 database on another machine. The connection managers for source and destination both use .Net Providers\Odbc
Data Provider with the Data Source Specification being ODBC connections specified on the Windows Server 2008 r2 machine hosting bids. All the test connections work...so far so good.
Issue is when I execute the control flow task the rows get picked up from the source DB2 database no problem but it fails on the insert to the destination DB2 table...The progress tab specifies the exceptions...
[ADO NET Destination [601]] Error: An exception has occurred during data insertion, the message returned from the provider is: ERROR [07002] [IBM][System i Access ODBC Driver]Wrong number of parameters.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "ADO NET Destination" (601) failed with error code 0xC020844B while processing input "ADO NET Destination Input" (604). The identified
component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the
failure.
I put a data viewer on the data flow connection and the records I expect are getting picked up and look ok. I checked to make sure the source and destination tables have the same number of columns in their record layout and identical data
types and they look fine.
Could someone kindly tell me whats going wrong? Does the error message indicate that some of the columns are getting dropped from the dataset before the insert?
Thanks much in advance for any help, Roscoe

Hi Roscoe,
Glad to hear that you have found the root cause. So, the issue occurs because numeric values with no decimal cannot be inserted into the Decimal data type column in the DB2 table. In SSIS, data type Decimal of DB2 database is mapped to data type DT_NUMERIC.
To address the issue, you can do a data conversion for the column in question to define its precision and scale such as DT_NUMERIC(9,2) by using the Data Conversion Transformation before the ADO NET Destination.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

My firefox is not running- when i try to open it their appears.. "The exception unknown software exception (0xc0000417) occurred in the application at location

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/942433]]</blockquote>
my firefox is not running… when i try to open it their appears.. “The exception unknown software exception (0xc0000417) occurred in the application at location 0x78b2ae6e” ..what can i do..????
REPLY

If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox then see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
Try a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*C:\Program Files\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Unknow SQL Exception 214 occurred

Team,
some reason my SP2013 bloking to create any new content db, wepApps. it is giving following error without any clue
Unknown SQL Exception 214 occurred. Additional error information from SQL Server is included below. Procedure expects parameter '@statement' of type 'ntext/nchar/nvarchar'. New Database Name :WSS_Content_f9c59c33c1cd46f4b5f8dd48f18ab6bc The
statement has been terminated.
EventID:5586
can anybody help me to resolve this problem.
S.Venkata Appaji

Hi,
According to your error message, it says that you are calling sp_executesql with a VARCHAR statement, when it needs to be NVARCHAR.
For your issue, you need to find the Procedure and use NVARCHAR in declation intead of VARCHAR like below:
DECLARE @SQL NVARCHAR(300)
SET @SQL = 'SELECT TOP 1 * FROM sys.tables'
EXECUTE sp_executesql @SQL
Instead of :
DECLARE @SQL VARCHAR(300)
SET @SQL = 'SELECT TOP 1 * FROM sys.tables'
EXECUTE sp_executesql @SQL
Reference:
http://stackoverflow.com/questions/2743890/why-do-i-get-procedure-expects-parameter-statement-of-type-ntext-nchar-nvar?rq=1
http://technet.microsoft.com/en-us/library/ee513056%28v=office.14%29.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

U201CAn unhandled exception win32 occurred in Xcelsius.exeu201D

I am working on Reporting tool Xcelsius. I am facing an error whenever I make a click on Manage connection tab it throws an unhandled exception u201CAn unhandled exception win32 occurred in Xcelsius.exeu201D and ask me for debug in Visual Studio and finally the error remains the same.
Can someone help me?
Thank you in advance
Warm Regards,
Sandeep

Do you mean that you usr the menu Data->Connections?
Do you have SQL server 2008 installed?
This is caused by change introduced by Microsoft in the new version of MFC dlls, 1833.
This is a known bug that is scheduled to be fixed in the next Fix Pack (FP2).
To work around the issue, you can do the following:
find the folder
C:\WINDOWS\WinSxS\x86_Microsoft.VC80.MFC_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_3bf8fa05
Copy all files from this directory to Xcelsius installation directory.
If it does not fix the problem, please let me know.
Margaret

Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred

Similar Messages

Maybe you are looking for