Problem executing the Query.

Hi,
When I am trying to open a Query in the Query Designer I am getting the error, like
Error Characteristic BP in Ext.Sys (BPCo) must be uniquely selected in the query
Error Characteristic BP in Ext.Sys (BPEmp) must be uniquely selected in the query
Error Characteristic BP in Ext.Sys (BP R) must be uniquely selected in the query
Error Characteristic BP in Ext.Sys (BP-P) must be uniquely selected in the query
Error Characteristic BP in Ext.Sys (BPSh-P) must be uniquely selected in the query
Error Characteristic BP in Ext.Sys (BPSldTo) must be uniquely selected in the query
Error Characteristic BP in Ext.Sys (BPSrvEm) must be uniquely selected in the query
Error Characteristic BP in Ext.Sys (BPR) must be uniquely selected in the query
It may be due to a characteristic 0BP_EXTERN- Previous Account Number which is a Navigation Attribute of all these characteristics,
*0CRM_SOLDTO, 0CRM_SHIPTO, 0CRM_BILLTO, etc etc. So all these characteristics which are associated with 0BP_EXTERN are having some problem.
All those Queries where 0BP_EXTERN is used are having the same issue. There used to be no issue till yesterday, I was able to execute the Query.
Can anybody help me solving this issue??
Thanks in advance.
Prasapbi

Also, when I went to InfoObject Properties,
Business Explorer--> Selection --> "Unique for Every Cell" (this option is selected for the InfoObject 0BP_EXTERN),
Or will it work if I select the option "No Selection Restriction".
Thanks
Prasapbi

Similar Messages

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

Problem while executing the query

Hi,
I have a query when iam trying to execute the query it is giving following error
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Select a valid Date (OR) Fiscal Period (OR) Calendar Month
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Select a valid Date (OR) Fiscal Period (OR) Calendar Month
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1452)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.executeFunction(Jco640Proxy.java:267)
Iam not sure why i could not able to execute this query.I could able to execute and run other queries.
Please help me..
thanks in advance

Hi,
Please check if you have used any formulae or function modules to derive the fiscal period/month from calday. Maybe the date being assigned is not of the same format as expected due to which the error (input valid date or calmonth or fiscal period) is being generated.
Regards,
Manoj

Strange problem while executing the Query.......

Hi,
I have created a new query and I am facing the strange behaviour.
When I execute it , it works fine but when one of my colleague execute it , it does not return any value for one of the Price variable.
It works fine with most of the people I have checked except one.
Can somebody let me know the reason.....?
Thanks , Jeetu

Hello,
If it is authorization problem go to transaction st01 and mark the first check for authorization. Under filter insert the user. Click Trace On.
Execute the query with that user and just after the lack of authorization message click trace off.
Read the trace.
Do the same with your user and compare the log of the two.
You'll see what is missing.
Assign points if helpful.
Diogo.

Serious system error while executing the query: java.lang.OutOfMemoryError

From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?

In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
     <ns0:field1>1</ns0:field1>
          <ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
     <ns0:field1>2</ns0:field1>
          <ns0:field10>test2</ns0:field10>
</ns0:createTemp>
     </ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space

Dump while executing the Query

Hi,
when I try to execute the query I get the following dump.
ASSIGN_TYPE_CONFLICT
Error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
Pleaes assist , its urgent
Regards,
ANita

Hi,
The problem is Solved.
If the problem is occuring while running the query, regenerate the query through transaction RSRT.
Regards,
ANita

[Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRaj

To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha

Cancelling a dashboard report to execute still executes the query behind

All,
We have some reports thats takes time to execute like 3-4 minutes. My problem is if I cancel any report to execute, it still executes the query. I can see the query thru sessions under nqsserver.exe as ACTIVE.
Because of this user are thinking that they cancel the reports and move on to new one but oracle is still spending time to execute that query.
Thanks

Hello.
I have exactely the same need, can you please let us know how you solved your problem?
Thanks
Best Regards.

Unable to execute the query after transpoting to Quality in BI7.0

Hi Friends,
We are facing problem while executing the query in BI 7.0 after transporting to Quality system.
Whenever we are clicking on the query in Analyser after transporting to quality, it is throwing an error like "Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION" and " system error in program SAPLRRI2 and form DIM_FAC_SRDATE-02" and it is disconnecting from BI system.
The transport went successfully to quality system.
Please do the needful regarding the above errors.
Thanks
Rama

Hello,
I resolved the problem. I removed all the variables in the query did another "Query Check" and the error message was clearer.
There were missing infobjects in the Multi-Provider. When I fixed this the error was gone.
Thanks.

Incorrec entries when execute the query

hi,
   I am facing one problem when execute the query on inventory cube(non cumulative cube).Query is diplaying entries for valuated stock Qty.on particular date, but those entries are not exist in BIW(Infocube ,ODS) or R/3 System.
I checked cache parameters. all settings are correct.
if anyone has the idea on this pls. do the needful
Thanks n Regards,
HReddy.M
I

hello,
      Try to drill down the report based on request ID and find out one record which has this inconsistancy...! then see the data in the CUBE based on that Req ID and PSA..! may be this way will help u out..!
       Check FS10N/MB5B/MB5L Tcodes in R/3 for reconcilation!
             -EnjoySAP

Invalid read mode while executing the query

Hi,
I have developed a query based on a cube in MM module.
When I try to execute the query, the following error is being displayed:
Invalid read mode
Message no. BRAIN017
Diagnosis
If queries (often unintentionally) are assigned the read mode "Query to Read All Data at Once", this often results in performance problems. To eliminate this problem, this warning is displayed when you execute a query with this read mode when the query is generated.
Procedure for System Administration
Before you execute the query, repair the read mode:
u2022 You can repair the read mode for this query in the Query Monitor (transaction RSRT1). You can set the read mode for the selected query by choosing Query -> Read Mode.
u2022 If this warning is displayed when you check a query, you need to change the default read mode for new queries in the InfoCube in InfoCube maintenance. In InfoProvider maintenance, choose Environment -> InfoProvider Properties -> Change and make the relevant settings on the Query/Cache tab page.
Please let me know what are the exact setting that I need to do and where.
Thanks in advance.
Will assign points for the solution.
Thanks & Regards.

Hi Ganesh,
You can change the read mode by going to transaction RSRT, entering the query name and then clicking the properties button. A dialog box will then be displayed that allows you to change the read mode.
The question of what's the best read mode for you query depends on the requirements of the query:
If you choose "read all data at once", it will take quite awhile before the first view of the query is shown. This is because it basically reads all data needed for your query (e.g. data for hierarchy nodes etc). However, after the initial view, successive navigations might be a lot faster.
The read mode "Read data during navigation and expansion of hierarchies" is usually the best mode. The initial view will show up in the least amount of time in this mode. However, when the users start to navigate, data will then be read from the database (aggregates, or the main cube tables) or the cache.
The read mode "Read data during navigation" is like the "Read data during navigation and expansion of hierarchies" mode. However, it will also read the data for the hierarchy nodes. Expansions of the hierarchy will therefore be faster in this mode. Of course, there's additional overhead for the initial view.
Hope this helps. Cheers.

While executing the query the output is completey different from the query

Dear friends,
We built a query and loaded the data for that infoprovider.
While executing the query the output is completey different from the query what we have built.
Output has no relevance to the query.
Kindly help the same.
Regards,
Sathya

HI Satya,
In my opinion the issue is with your front end.
Results should be identical in RSRT, BEx Analyzer (Workbooks) and the ABAP-Web since all three frontend tools use the "ABAP Runtime layer".
It may differ In the Portal where the new "Java Runtime layer". (Java-Web.) is used.
This is given in OSS Note 1296576 - Different Query Behaviour: ABAP - Java.
So i think the problem lies in your analyser. If you are using Analyzer: BI Add on 7.X (Based on 7.10) try and get support package 8.
Hope this helps.
Thanks,
Rahul

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi   .
    I was creating the pass the values t in temp tables though s sis package vs2012 .
  First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
   exec USP_GETMP02333
   go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one   executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
                [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

Can I stop a report from Re-executing the query when I go back to that page

I have a report that has a complicated query and looks at a lot of information to display the results. This query then links of to show details of individual items that were displayed in the result. But when I hit the back button on the browser, it executes the query again and it takes a while for the page to load.
Is there any way to stop this and only execute the query when the User pushes a Button on the page else display the previous results.
Thanks
Sriram

Another alternative is to make that detail link open in a popup window using
javascript:popupURL(...);This way, the complicated report page is always visible.

While executing the query in the web template I am facing below issue

Hello SAP geniuses,
Please help me on my issue ,
while executing the query in the web template i am facing below issue.
The variable for characteristic (region) is appearing but this characteristic (region) is not appearing in the free characteristic zone but when we are executing the query with out webtemplate it is showing both variable and free characteristic
can anybody help us to identify what is the issue with the web template.
Thanks
Alok

Hi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP

Problem executing the Query.

Similar Messages

Maybe you are looking for