: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

 Hi   .
    I was creating the  pass the values t in temp tables  though s sis package vs2012 .
  First I was taken on executive SQL TASK.
 IN EXCUTIVE SQL TASK  . I was write the stored proce:
Sp;
reate  procedure  USP_GETEMP2333
AS
begin
Select  eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
  insert into #temp
   exec USP_GETMP02333
   go.
 It was executive correctly.
 I was taken another sequence container. In the sequence container iam creating one   executive  sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
 drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
 and one falt flies  it was taken to designation .
 iam changing  all  connection properties:
 in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
 But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
                [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
 drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
 Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

Similar Messages

  • [Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

    Hi
    DECLARE @XMLA nvarchar(3000)
    , @DateSerial nvarchar(35);
    -- Change date to format YYYYMMDDHHMMSS
    SET @DateSerial = CAST(GETDATE() AS DATE);
    --SELECT @DateSerial
    Set @XMLA = 
    N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
     <ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
    xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
    xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
    <KeyErrorLimit>-1</KeyErrorLimit>
    <KeyNotFound>IgnoreError</KeyNotFound>
    <NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
     </ErrorConfiguration>
     <Parallel>
    <Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
    xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
    xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
     <Object>
     <DatabaseID>MultidimensionalProject5</DatabaseID>
     <CubeID>giri</CubeID>
     <MeasureGroupID>Fact Internet Sales</MeasureGroupID>
     </Object>
     <Type>ProcessFull</Type>
     <WriteBackTableCreation>UseExisting</WriteBackTableCreation>
     </Process>
      </Parallel>
    </Batch>';
    EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
     iam executive the    query when iam getting below error.
      [Execute SQL Task] Error: Executing the query "DECLARE
    @XMLA nvarchar(3000)
    , @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
    correctly, or connection not established correctly. 
     how to solve this error;
     please help me

    What are you trying to do? What sort of data source is  SHALL-PCAdventureWorksDw?
    When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
    If you explain why you think this would work in the first place, maybe we can help you.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • I have problem with the mic....sometimes others can hear me and other times not at all

    i have problem with the mic....sometimes others can hear me and other times not at all

    can anybody provide me with the solution

  • HT1338 I have a problem with the aspect ratio of photos as they appear on iPhoto.  They are not correct.  On the original photo people were fat and squat.  I tried rotating and they became long and narrow.  Neither correct.

    I have a problem with the aspect ratio of photos as they appear on iPhoto.  They are not correct.  On the original photo people were fat and squat.  I tried rotating and they became long and narrow.  Neither correct.  Any suggestions?

    Sounds more like a problem with your Display Resolution than iPhoto.
    Go to: Apple / System Preferences / Displays and in the Resolutions list select,
    1280 x 800 if you have a 13" MacBook Pro
    1400 x 900 if you have a 15" MacBook Pro
    1920 x 1200 if you have a 17" Macbook Pro

  • Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

    help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

    Contact the App store for Apple ID help. Their support link is on the right of the App store window
    LN

  • Is anyone else experiencing problems with the thunderbolt port on their Mac Mini's regarding using it to connect a second monitor? I've got the Mini Display Port to DVI-D adapter along with a DVI-D cable and I can't get an image on the second monitor.

    I had an dual display image / setup working twice for a few seconds, but then it cut out. I think there may be a problem with the thunderbolt port.

    As far as I can tell you have only listed that you have a DVI monitor connected to the Mini Displayport socket (i.e. the Thunderbolt socket) via presumably the Apple Mini Displayport to DVI adapter and a DVI to DVI cable.
    You don't appear to have listed what the second monitor is and how it is connected (even though not working). As such I cannot tell what may be wrong.

  • I like the new version of Firefox 4, but have slowest problem with the company bluecoat proxy. I have change different setting in the about:config. Any Ideas how to to fix the slowest.

    I like the new version of Firefox 4, But have slowing problem with the bluecoat proxy. I have change different setting in the about:config with no luck. Any ideas why it's moving so slow would help?
    network.automatic-ntlm-auth.trusted-uris = proxysg
    network.negotiate-auth.delegation-uris=proxysg
    network.negotiate-auth.trusted-uris=proxysg
    network.negotiate-auth.allow-proxies = True
    network.ntlm.send-lm-response = True
    network.automatic-ntlm-auth.allow-proxies=True

    You can also look at Tab Mix Plus.
    Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122

  • Problem with the query of Sharepoint Calculated Fields

    Hello,
    I am developing an application in sharepoint 2013 foundation. but i have problems with a list, when executing a caml query on a calculated field. I try the solution of this blog
    http://sptalks.wordpress.com/2013/03/25/query-on-calculated-field-problem
    but i got no result
    attentive to any comments
    thanks

    Hello,
    This is my CAML Query
    <View>
    <ViewFields>
    <FieldRef Name="ID" />
    <FieldRef Name="PermMask" />
    <FieldRef Name="FSObjType" />
    <FieldRef Name="Nombre" AutoHyperLink="TRUE" />
    <FieldRef Name="Apellidos" AutoHyperLink="TRUE" />
    <FieldRef Name="Cargo" /><FieldRef Name="Edad" />
    <FieldRef Name="Compa_x00f1_ia" />
    <FieldRef Name="Created" />
    </ViewFields>
    <Query>
    <GroupBy Collapse="TRUE" GroupLimit="30">
    <FieldRef Name="Compa_x00f1_ia" />
    <FieldRef Name="Edad" />
    </GroupBy>
    <OrderBy>
    <FieldRef Name="ID" />
    </OrderBy>
    <Where>
    <Contains>
    <FieldRef Name="Ano" LookupId="FALSE" />
    <Value Type="Text">2014</Value>
    </Contains>
    </Where>
    </Query>
    </View>

  • Problem with the query in group by clause

    hi, i have problem with group by clause, can some one please help me.
    select
    header_id,
    (select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
    where
    a1.country=a.country
    and a1.source='AP'
    and a1.header_id=a.header_id) WHT,
    sum(dr),
    sum(cr) from temp_tab a
    group by header_id,
    (select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
    where
    a1.country=a.country
    and a1.source='AP'
    and a1.header_id=a.header_id)
    select * from temp_tab
    drop table temp_tab
    create table temp_tab(header_id number ,line_num number, country varchar2(2),
    source varchar2(2), dr number, cr number,primary key(header_id,line_num));
    insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 1,'NL','AP',100,20);
    insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 2,'PO','AP',20,20);
    insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 3,'NL','AP',70,20);
    insert into temp_tab(header_id, line_num,country, source, dr,cr) values(2, 1,'NL','PA',100,20);
    insert into temp_tab(header_id, line_num,country, source, dr,cr) values(2, 2,'NL','PA',100,20);
    insert into temp_tab(header_id, line_num,country, source, dr,cr) values(3, 1,'KR','PO',100,20);
    commit;
    Appreciate your help.
    Thanks,

    select header_id,
             (select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
             where a1.country=a.country
             and a1.source='AP'
             and a1.header_id=a.header_id) WHT,
             sum(dr),
             sum(cr)
      from temp_tab a
    group by header_id
    ,countryIt's kinda hard to follow what your query does... maybe because I'm only at my second coffee..
    Edited by: Alex Nuijten on Oct 2, 2009 8:07 AM

  • Problem With The Query

    Hi gurus,
    I have a problem in a query
    I have a lot of records that are the same and I don’t want to sum the value of them more than once. How can this be done??
    The following table should illustrate my problem:
    DEPT--MONTHCFBID----SCORE
    ALST--APR100--
    3
    ALST--MAY100--
    3
    ALST--JUN101--
    4
    ALST--APR102--
    5
    Overall Score 15
    I want the Overall Score to be 12. (only summing up unique records Of CFBID).
    Any help will be greatly appreciated.
    Regards
    Supraja.K

    Hi,
    I had Done with Formula with Excveption Aggregation as Average And reference charecterstic as CFBID
    DEPT--MONTHCFBID----SCORE
    ALST--APR100--
    3
    ALST--MAY100--
    3
    ALST--JUN101--
    4
    ALST--APR102--
    5
    Overall Score 15
    I want the Average Score12/3 = 4.
    but I am getting as 15/3 = 5
    What to Do any other Solution please

  • Is there a problem with the Itunes Windows Installer Programme?

    The reason I ask is because I had a perfectly working Itunes programme on my external hard drive, from which I then deleted all the double ups of songs I had and then could not gain auto. updates of the dsongs I wished to add to itunes.
    It said to reinstall Itunes, which I tried to do and since this time the installation stops when installing the registry components and the following message appears -
    There is a problem with the Windows Installer Package. A programme required for this to install could not be run. Comntact your support personall or package provider.
    Can anyone help please?
    Thank you in advance for any help forwarded
    MrG
    P.S. - Not that well versed in computer speak, so laymans terms welcomed.

    This message often relates to a problem with Apple software update.
    Go to Add remove programs and find Apple Software update. Try repairing it.
    Select Change>>repair.
    That probably will not work
    Then try uninstalling any instance you find of Apple Software update. That probably will not work either.
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
    http://support.microsoft.com/kb/290301/
    To run the program – All Programs>>Windows Install Cleanup
    Remove any instance you find of Apple software update with the cleanup utility.
    Download a fresh copy of the iTunes installer and save it on your desktop.
    http://www.apple.com/itunes/download/
    Restart your computer and try installing iTunes.

  • Problem with the creation of the _pageflow folder in the portal project

    Hi,
    I have developed one portal project on the BEA Weblogic Portal server version 9.2. And I am having a quite a number of pageflow portlets in my application.I am facing a weird problem with the workshop(BEA Workshop for Weblogic Platform 9.2.1). It is not generating the folder _pageflow required for all the protlets when we build it.I tried cleaning and building it number of times but it is of no use.
    Is it a bug in the weblogic server version or do I really miss something in the workshop settings?
    Please help.
    Thanks & Regards
    Prakash.

    Hi Dmitry,
    What state are the tasks in?  Are they in Active, Running, or Completed?  There will only be output files if the tasks are in state running or completed.
    Additionally, what is the status of the pool which the tasks ran on?  If the pool VMs have been deallocated (or the pool itself has been deleted) then the task files will be lost.  This is because the files of the tasks reside on the VM which ran
    the task.
    Lastly, you can check the file retention time of the tasks in the BatchExplorer UI by selecting the task and looking in the "Task Details" tab for "TaskConstriants.RetentionTime" to see what that is set to - if the retention time has
    passed (i.e. retention time was 1h but the task was run 2h ago), then the files will be cleaned up.
    It sounds like you already are using BatchExplorer, but we recently published a blog post which has some specific instructions for using BatchExplorer to debug (how to RDP into a VM for example), which you can find
    here - it also has some code snippets for how BatchExplorer performs the operations that it does.
    Let us know what you find from your investigation and we can help you figure out why your tasks don't have output files.

  • Haviing problem with the facebbok for 9800

    i hava a problem with the facebook for blackberry 9800, i download it many times but i can not see the i con, i used many ways to find out it, but failed to find it,

    Hello nomanmahmoo, 
    Welcome to the forums. 
    Have a look at this article which may help you out with your issue. 
    Facebook icon is missing on the BlackBerry smartphone after upgrading to Facebook
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Sqljdbc4 driver problem with the latest version of java (java6 update9)

    Hi all, sorry for my ingles.Need help with a problem, I have to connect to sql server 2008 from Java, I had install the Java SE Development Kit 6u22, and when the upgrade to the 6u29, the driver stopped working, they let the following example:
    public static Connection getConnection(String db_connect_string,String jdbcDriver)
    Connection conn = null;
    try {
    Class.forName(jdbcDriver);
    conn = DriverManager.getConnection(db_connect_string); //when you run this line, does nothing mores, nor throws errors
    } catch (Exception e) {
    System.out.println("Error de conexion." + e.getMessage());
    return conn;
    uninstall update29, and install that before and had returned to work. Still do not know how to solve this problem with the latest version of java. Any ideas?.
    Thanks.

    You are not the only one.
    MS SQL JDBC does not work with 1.6.0_29?

  • Failure Description: ORA-44002: invalid object name

    Hi,
    I'm trying to use O-cluster to find clusters in my data programmatically. When I try to bin the data (using a modified version of the dmocdemo.java), I get the following error
    Failure Description: ORA-44002: invalid object name
    Details -
    I'm trying to cluster data in my table (see desc below) based on values of evt_hostname, evt_key and evt_username;
    SQL> desc sc.sc_event_store;
    Name Null? Type
    EVT_SEQNO NOT NULL VARCHAR2(64)
    EVT_HOSTNAME NOT NULL VARCHAR2(64)
    EVT_TIMESTAMP NOT NULL TIMESTAMP(6)
    EVT_ID NOT NULL NUMBER(8,2)
    EVT_CAT_ID NUMBER(8,2)
    EVT_SERVERSTATE NUMBER(8,2)
    EVT_USERNAME VARCHAR2(64)
    EVT_KEY VARCHAR2(2048)
    EVT_VALUE VARCHAR2(64)
    EVT_RECUR_TAG NUMBER(15,2)
    EVT_CLUSTER_ID VARCHAR2(64)
    I've modified prepareData() in dmocdemo.java like this
    isOutputAsView = false;
    inputDataURI = "SC.SC_EVENT_STORE";
    outputDataURI = "OC_BINNED_DATA_BUILD_JDM";
    // Create boundaries for all numeric attributes
    OraBinningTransformImpl buildDataXform =
    (OraBinningTransformImpl)m_binningXformFactory.create(
    inputDataURI, outputDataURI, isOutputAsView );
    //buildDataXform.setLiteralFlag(true);
    String[] excludeColumnList = {"EVT_SEQNO","EVT_TIMESTAMP","EVT_ID","EVT_CAT_ID","EVT_SERVERSTATE","EVT_VALUE","EVT_RECUR_TAG","EVT_CLUSTER_ID"};
    buildDataXform.setExcludeColumnList(excludeColumnList);
    buildDataXform.setNumberOfBinsForCategorical(125);
    //buildDataXform.setNumericalBinningType(OraNumericalBinningType.auto_equi_width);
    buildDataXform.setCategoricalBinningType(OraCategoricalBinningType.systemDefault);
    xformTask = m_xformTaskFactory.create(buildDataXform);
    executeTask(xformTask, "ocPrepareBuildTask_jdm");
    The executeTask() function tries executing the task, but returns with
    Failure Description: ORA-44002: invalid object name
    Any insight/help will be greatly appreciated.

    Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
    Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
    Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
    is an undocumented behavior and should not be relied upon.

Maybe you are looking for