Problem extracting data from R/3 to BW using infopackage?

Hi all,
I am trying to extract data from R/3 to BI7.0 through infopackage and its giving below error.
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system
In the details tab:
Extraction (messages): Missing messages in yellow status
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings in yellow status
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
Processing (data packet): Everything OK in green status
Data Package 1 ( 370 Records ) : Everything OK
Inbound Processing ( 370 Records ) : No errors
Data package 1 received; Processing is starting
Update PSA ( 370 Records posted ) : No errors
Data package 1 is being saved...
370 records for data package 1 updated successfully, 0 records filtered
Processing end : No errors
Inbound processing of data package 1 finished.
Please anyone try to look at this issue and give me better soluttion ASAP.
Thanks,
Suresh.

Hi ,
The infopackage run for avery long time in yellow state with out changing to green, This might happen due to connection error(get in touch with your basis team) or due to over load on the system.
eventhough the status of request is finished in source system, the job will be executing in the BI.
1)Wait for sometime for the request to turn out green automatically or
2)make the request to red and delte, repeat the infopackage step.
3)IF you know about the no of records that need to be transferred and if the total records are transferred already, manually change the request to green.
Cheers,
Srinath

Similar Messages

When I extracting data from DSO to Cube by using DTP.

When i am extracting data from DSO to Cube by using DTP.
I am getting following erros.
Data package processing terminated (Message no. RSBK229).
Error in BW: error getting datapakid cob_pro (Message no. RS_EXCEPTION105).
Error while extracting from source 0FC_DS08 (type DataStore) - (Message no. RSBK242).
Data package processing terminated. (Message no. RSBK229).
Data package 1 / 10/04/2011 15:49:56 / Status 'Processed with Errors'. (Message no. RSBK257).
This is the brand new BI 7.3 system. Implementing the PSCD and TRM.
I have used the standard business content objects in FI-CA (dunning history header, item,activities) and standard Datasource (0FC_DUN_HEADER ,0FC_DUN_ITEMS, 0FC_DUN_ACTIVITIES). I have extracted data till the DSO level . when I try to pull the data to info provider level(cube) using DTP . I am getting fallowing error.
my observation: when ever I use the DSO as source to any target like another DSO or cube. its throwing same kind of error for any flow including simple Flat file .
please suggest any one whether do I need to maintain basic settings since its a brand new BI 7.3.
please help me out on this issue . I am not able to move forward .its very urgent

hello
Have you solved the problem ?
I have the same error...
as you solve this error,
can you help me please I have the same error
yimi castro garcia
[email protected]

How to extract data from Essbase to Flat File using ODI

Hi,
Anyone know how to extract data from Essbase to Flat File using ODI?
Thanks in advance.
Regards,
Sumardi

Hi,
Have you read through :-
Oracle Data Integrator Adapter for Hyperion Essbase Getting Started - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_getting_started.pdf
Oracle Data Integrator Adapter for Hyperion Essbase User's Guide - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_users.pdf
If you have read them and are still have a problem at what stage are you having the issues?
Cheers
John
http://john-goodwin.blogspot.com/

Problem Extract Data from Essbase

Hi all,
I have this error when I try to extract data from essbase :
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.wrapper.EssbaseRecordFetchException: Out of memory error.
     at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.hasNext(Unknown Source)
     at com.hyperion.odi.essbase.ODIEssbaseResultSet.next(Unknown Source)
     at com.hyperion.odi.essbase.ODIStagingLoader.loadData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
For information :
I use an reportscript which extract 400 000 records. I think that the problem comes from the staging area. How to modify size of the management of the memory?
I don't have this problem when i extract just 2 000 records for exemple.
Best regards,
Ben

Hi,
Are you using a local or a defined agent?
Are you using the memory engine as the staging area.
Anyway you can increase the memory being used by the JVM depending on the above.
Cheers
John
http://john-goodwin.blogspot.com/

Extracting data from sap to java application using JCO

Hi,
I am new to sap and wanted to know what is the procedure to extract data from based on the java application client (user defined input from different tables of sap) input and need to manage huge data meaning reading millions of records.kindly help me how to handle this in ABAP.

Hi,
Pls chk these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4
Accessing SAP Tables from a Java application
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/47b6cd90-0201-0010-5aba-b6b7474d4aff
Java Application ,SAP BW
<b>***Reward Points if Useful</b>
Regards
Gokul

I have a problem to extract data from oracle dump file (.dmp) using oracle database or any other tools.

There is IMP utility which provides me data as graphical way. But i need extract data in such a way so that i could able to use in my application.
thanks,
mohan

Hi,
EdStevens
Actually I was using SQL Developer. Sorry for the wrong define question. Now the real problem is:
I want to read or extract data in a txt file from Oracle Dump (.dmp) file without using Oracle sqlPlus or Oracle Database.
No need to say that i am able to extract dump data using sqlPlus. But for that, there is a little burden to install oracle database
or sql Developer.
I also listen about Oracle Loader a little bit. Is it a tool for providing extraction of data from Oracle dump file.
Thanks for your previous reply,
And now waiting for your suggestion.
thanks,
mohan

I want to extract data from oracle dump file (.dmp) using oracle database or any other tools.

There is import which provides me data as graphical way. But i need extract data in such a way so that i could able to use in my application.
thanks,
mohan

This isn't a SQLDeveloper question. You will get better answers in the Database - General forum.
Oracle dump files produced by the exp or expdp utilities are inproprietary formats which can only be read by the imp or impdp utilities respectively.
The best way to get data out of a dump file is to import it into a database and then extract it to plain text files using SQL.
Alternatively, leave it in the database and your application can access it there.
The exp dump file is mostly plain text, but the format is not published so you could waste a lot of time figuring it out.

How to extract Data from HR into BW by using the LSA Stamping Approach?

Hi All,
i have an issue regarding the extraction on Data fron HR into BW by using the LSA stamping approach.
Could some one give me some steps are the logi should be implemented? Or document?
Thank
You
Cheers

hi,
You can find the business content objects here:
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/16/4d0b3c56488e6be10000000a114084/frameset.htm
For other info you can look up some OSS notes and forum threads (like for details on CRM extraction)
You can check out the best practices here:
http://help.sap.com/bp_biv170/html/bw.ht
Hope this helps you
regards
harikrishna N

Problem extracting data from XML

The XML file format is:
<xml>
<condesa>
<lote>
<loteid>H50601</loteid>
<nombre>Servicios</nombre>
<categoria>Escuela</categoria>
<subcategoria>Arabe</subcategoria>
<telefono> 55532255</telefono>
<direccion> Juan pedro 23</direccion>
<image>roble.jpg</image>
</lote>
</condesa>
</xml>
I have an xml file that I am reading from. I am them taking
the data and putting it into an XML object named condechiXML.
var condechiXML:XML = new XML();
var XML_URL:String = "condechi.xml";
var condechiXMLURL:URLRequest = new URLRequest(XML_URL);
var condechiLoader:URLLoader = new URLLoader(condechiXMLURL);
once loaded:
condechiXML = XML(condechiLoader.data);
condechiTotal = condechiXML.condesa.lote.length();
What I want to do is run a for loop for every branch in my
xml tree where I access a property in each branch. I have the for
loop working using the length attribute for xml but when i want to
use:
for (var i:uint=1; i<=condechiTotal; i++) {
trace(condechiXML.condesa["lote["+i+"]"].loteid);
my trace returns blank lines.
How can I make this work?
Thanks for the help.
Omar

quote:
Originally posted by:
Alfarovive
But is there a way to do what I wanted to do, inserting my
variable i into the expression to point to the xml branch?
I am not sure I understand. Doesn't loop do what you need to
- using i in the expression to point to the XML branch?
If it relates to your question, your original syntax
["lote["+i+"]"] is attempting to use String notation and not
integer. XML lists are not Objects but Arrays. Say, if i = 1, you
will get ["lote["1"]"] - it doesn't exist in your xml, what does
exist is lote[1]. See the difference?

How can I extract data from ST03 - what tables are used?

Hi
I currently have to create performance statistics daily for management. To do this I use transaction ST03 and manually copy the previous days Dialog average response time, DB, CPU and GU av. times into a spreadsheet, and also the average dialog response time for 4 key transactions from the transaction profile.
It would be nice to automate this. I was thinking of writing a basic ABAP program to query the relevant tables to extract this data - does anyone know which tables are used? I'd tried running a trace but it was not clear which tables/rows etc would be required.
Thanks
Ross

Ok, that FM is an old one - for NW2004s (700) need to use 'SWNC_COLLECTOR_GET_AGGREGATES'.
Have a basic program below. What I'm trying to do is get the average response time for transactions. I can get 'respti' from the table but I think this is the total response time - what field represents average response time?
Also, the numbers that it's pulling back don't seem to match the numbers in ST03 at all... except 'dcount'. This seems to correct ly show the number of steps... but the other values don't match anything. What am I doing wrong?
Program below...
Cheers
Ross
REPORT Z_GETSTATS.
PARAMETER: day TYPE dats DEFAULT sy-datum.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
      wa_usertcode TYPE swncaggusertcode.
START-OF-SELECTION.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
    EXPORTING
      component     = 'TOTAL'
      periodtype    = 'D'
      periodstrt    = day
    TABLES
      usertcode     = t_usertcode
    EXCEPTIONS
      no_data_found = 1
      OTHERS        = 2.
LOOP AT t_usertcode INTO wa_usertcode.
         WRITE:/ wa_usertcode-entry_id.
         WRITE:/ wa_usertcode-respti, wa_usertcode-procti, wa_usertcode-cputi, wa_usertcode-dcount, wa_usertcode-ucount.
         WRITE:/ '*************************************'.
ENDLOOP.

Extracting data from an XML document that uses namespaces

Hello all,
Firstly, please let me wish you all a very happy and prosperous 2013!
I have a piece of XML containing namespaces (retrieved from a web service) and I am having difficulty extracting values
(If you're interested this is the webservice: http://api.worldbank.org/countries/FRA/indicators/NY.GDP.MKTP.CD?date=2009)
Here is some test code with two cases -
1) where I leave in the namespace and
2) where I strip out all references to the namespace
Case 1 doesn't work, whereas Case 2 works well.
I would prefer a more elegant solution than simply stripping out the namespace.
I have probably just misunderstood something about how to work with namespaces in PL/SQL.
Do any of you have suggestions about how best to approach this?
Many thanks in advance.
Niall.
set serveroutput on
set define off
DECLARE
v_xml XMLTYPE;
v_clob CLOB;
v_country VARCHAR2(255);
BEGIN
v_clob := '<?xml version="1.0" encoding="utf-8"?>
<wb:data page="1" pages="1" per_page="50" total="1" xmlns:wb="http://www.worldbank.org">
<wb:data>
<wb:indicator id="NY.GDP.MKTP.CD">GDP (current US$)</wb:indicator>
<wb:country id="FR">France</wb:country>
<wb:date>2009</wb:date>
<wb:value>2619685000757.11</wb:value>
<wb:decimal>0</wb:decimal>
</wb:data>
</wb:data>';
v_xml := XMLTYPE(v_clob);
SELECT extractvalue(v_xml,'/data/data[1]/country', 'xmlns:"http://www.worldbank.org/"')
INTO v_country
FROM dual;
dbms_output.put_line(' ');
dbms_output.put_line('*** Case 1');
dbms_output.put_line('*** '||nvl(v_country,'nothing'));
dbms_output.put_line(v_xml.getStringVal());
v_xml := XMLTYPE(replace(v_clob,'wb:')); -- strip out wb:
SELECT extractvalue(v_xml,'/data/data[1]/country', 'xmlns:"http://www.worldbank.org/"')
INTO v_country
FROM dual;
dbms_output.put_line(' ');
dbms_output.put_line('*** Case 2');
dbms_output.put_line('*** '||nvl(v_country,'nothing'));
dbms_output.put_line(v_xml.getStringVal());
END;
/

Your case 1 query should be
(not tested)
SELECT extractvalue(v_xml,'/wb:data/wb:data[1]/wb:country', 'xmlns:wb="http://www.worldbank.org/"')If the XML is going to be small, you could also do it this way purely in PL/SQL
[url http://anononxml.blogspot.com/2010/06/xml-parsing-with-namespaces-via-plsql.html]XML Parsing with Namespaces via PL/SQL. Ignore the DOMDocument examples (first two) in there.
If the XML will be large and you are on 11.1 or greater, then it would be faster to insert the XML into a column in a DB table (could be a global temporary table) where the column is XMLType and the storage is SECUREFILE BINARY (default on 11.2.0.2+). Then you could use XMLTable, like
[url http://anononxml.blogspot.com/2010/08/xml-parsing-with-namespaces-via.html]XML Parsing with Namespaces via XMLTable

Regarding extract data from r/3 to BW3.5

Hi,
Before i extracted data from flat file to BW.
Now i am extracting data from r/3 to bw.This is the first time to extract.
Please give steps to extract data from r/3 to bw using LO's and please give some directions for generic also.
Please do the needful for me.
Thanks

Hi,
<b>For LO:</b>
Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
Also refer to the weblogs by Roberto:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
other doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Bye
Dinesh

Extracting data from a pdf form

Hi,
livecycle es2, workbench 9.0
I'm new to workbench and have a problem extracting data from a pdf form submitted to a short lived process.
I have set up the following very simple process :
default startpoint > ProcessForm > exportData > set value > set value > Write Document
The intention is to update the document and write it to disk. So far, each step works except for the 'export data' where I cannot get the pdf to extract to xml.
The Input to the 'export data' step is a variable (myDoc), Data Type: Document, created from the incoming PDF form.
If I write out myDoc it is an exact copy of the incoming document, so I guess the start and finish steps of of the process are OK.
The incoming (PDF) form I was given had no data schema, but I thought I could access the form data by exporting to an xml variable....
Service : FormDataIntegration / exportData
input (PDF Document)    variable : myDoc
output(Data extracted)     variable : myXMLData
Then in the next step (set value) access the xml element I am after ..
Mappings
Location: /process_data/@groupId      Expression: /process_data/myXMLData/xdp/datasets/data/form1/mainPage/groupId
This is did not work, so I got the incoming form, exported the form data to an xml file, and created a schema using Stylus Studio. I then imported that into the myXMLdata definition. ( BTW - Do I need to specify the root node after importing it ? )
Still not working !
Extra info : The XML view of my incoming form shows I have a minimal dataset definition- is this OK ??
<connectionSet xmlns="http://www.xfa.org/schema/xfa-connection-set/2.8/">
   <?originalXFAVersion http://www.xfa.org/schema/xfa-connection-set/2.4/?></connectionSet>
<xfa:datasets xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
   <xfa:data xfa:dataNode="dataGroup"/>
</xfa:datasets>
The schema created by stylus studio has none of the xfdf, xfa settings I have seen on other schemas - is this OK ?
Any help to get this fixed greatly appreciated
thanks
steve

hey thanks for the offer, but I am now sorted after I found a simple working example on line.
This is a similar process to the one I am working on, and is clearly described and easy to follow...
http://eslifeline.wordpress.com/2009/04/25/extracting-data-from-signed-pdf-using-livecycle -server/
girish bedekar - I thank you !

Error extracting data from essbase cube using MDX method

Hi,
We have some problems extracting data from essbase cube using MDX method, we believe that the problem is the MDX query, this is the problem and query:
ERROR:
[DwgCmdExecutionThread]: Cannot perform cube view operation. Analytic Server Error(1260046): Unknown Member SELECTNON used in query
com.hyperion.odi.essbase.ODIEssbaseException: Cannot perform cube view operation. Analytic Server Error(1260046): Unknown Member SELECTNON used in query
at com.hyperion.odi.essbase.wrapper.EssbaseMdxDataIterator.init(Unknown Source)
MDX:
SELECT
NON EMPTY {[YearTotal].[Jan]} ON COLUMNS,
NON EMPTY {[Total Movimientos].[Presupuesto Base]} ON AXIS(1),
NON EMPTY {[Año].[FY11]} ON AXIS(2),
NON EMPTY {[Escenario].[Presupuesto_1]} ON AXIS(3),
NON EMPTY {[Version].[Trabajo]} ON AXIS(4),
NON EMPTY {[Moneda].[Moneda Input]} ON AXIS(5),
NON EMPTY {[Centros de Costo].[1101]} ON AXIS(6),
NON EMPTY {Descendants([Resultado Operacional],4)} ON AXIS(7)
FROM [DSR02].[ROP]
We try extract data using a sample cube and work fine, this is the mdx query:
SELECT
{[Actual],[Budget]} ON COLUMNS,
{[Sales]} ON ROWS,
NON EMPTY {[Product].levels(0).members} ON PAGES,
NON EMPTY {[East].levels(0).members} ON AXIS(3),
NON EMPTY {[Year].levels(0).members} ON AXIS(4)
FROM Sample.Basic
The model reversed ([DSR02].[ROP]) have the same structure than query need, the query and the model are fine, definitely we can´t see the problem, someone can help us?
Regards

You will be able to test the MDX query in EAS, it is usually best to test the query first before trying to use it in ODI.
Is there any reason you are using MDX to extract the data, have you tried reportscript as I usually find it more efficient to extract the data.
Cheers
John
http://john-goodwin.blogspot.com/

How can I extract data from a sound file in carbon

hello,
I am a student and I start recently learning carbon. I have to do a application which can read and extract data from a sound file and use that data to do some kind of visual representation of the file. I would like to know if someone can give some directions, tutorial,some code sample etc.
thank you for your help
chenita7

hello orangekay
My idea is to create an application that can read a sound file( AIFF, MP3 or other) in order to extract some kind of data ( numbers or any values) and use that data to represent the sound file visually.
I dont know which kind of data can be extract from a sound file, and in which way i can manipulate that data to became a visual representation of the sound file. this is what I want to do as my second assignment for a subject at school, introduction to programming. has to be done based in carbon.
regards
chenita7

Problem extracting data from R/3 to BW using infopackage?

Similar Messages

Maybe you are looking for