Problem faced when the column is moved in Jtable
Say , in a JTable 3 columns are present. the cells under the 2nd column is editable and 3rd is not editable. when i move the rd column to the second column position, the cells which were under second column becomes non editable. How to overcome this??
when i move the rd column to the second column position, the cells which
were under second column becomes non editable.Why do they become non editable?
If I understand correctly when you call a TableModel's isCellEditable(int
rowIndex, int columnIndex) the columnIndex argument has nothing to
do with with where on the displayed JTable the column is being displayed.
Similar Messages
-
How do I select the entire text when the focus is moved to one TextBox?
How do I select the entire text when the focus is moved to one TextBox?
There are three TextBoxes. I use <TextBox TabIndex="1"/> to set the order they are selected. When I enter one specific TextBox, I would like to have the entire text selected ... one key stroke removes all of the text in that TextBox.
bhs67I do it the following way:
1. Override the OnStartup for the application. Use the following code: (VB.NET)
EventManager.RegisterClassHandler(GetType(TextBox), TextBox.GotFocusEvent, New RoutedEventHandler(AddressOf TextBox_GotFocus))
2. In the event handler use this code (again VB.NET)
Private Sub TextBox_GotFocus(ByVal sender As Object, ByVal e As RoutedEventArgs)
_theTextBox = CType(sender, TextBox)
If setFocusTimer IsNot Nothing Then
RemoveHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
End If
setFocusTimer = New DispatcherTimer
setFocusTimer.Interval = TimeSpan.FromMilliseconds(10)
AddHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
setFocusTimer.Start()
End Sub
Private Sub setFocusTimer_Tick(ByVal sender As Object, ByVal e As System.EventArgs)
setFocusTimer.Stop()
_theTextBox.SelectAll()
End Sub
What this does is register a handler for every textbox in your application. This will execute when the GotFocus event is raised and will allow you to do whatever (in this case select all) you want. A great way of handling things at the application
level.
Lloyd Sheen -
I’m combining several InDesign files into one PDF, with several hundred text links across the different sections, as well as within each. The cross-document (section) Text Anchor Hyperlinks work fine in my workspace - but when I change the file location, they are no longer active (other links, bookmarks remain intact).
How do I set up InDesign cross-document Text Anchor Hyperlinks so that when the files are moved, they remain active?They seem to be a lot of extra work, and I don't see what the additional benefit is. I have several hundred links to do. I would appreciate learning what the benefit is, as I don't mind the extra effort if it will deliver the desired results.
-
My iPad Prefs are set for the side switch to Mute; but the speaker does not mute when the switch is moved down.
That setting only works for system sounds like push notifications (emails and the like), some game sounds, keyboard clicks and things like that. If you want to mute all sounds you still have to turn the volume all the way down with the volume switch.
-
How to fix OS X Yosemite installation Problem?
When the unit is rebooting the apple logo shows up then it is replaced by a cancel symbol?
Please help what to do?Do you mean a circle with a slash through it?
If so, the drive doesn’t have or can’t find the necessary startup files.
Boot into Recovery and reinstall. -
Sortingtable clears the forms when the column is clicked for the first time
Hi All,
I have text fields which will take the conditions for search and result will be displayed in the sorting table of the same form,
When the search is done for the first time the result is shown in the sortingTable, but when we click any of the column to get it sorted it clears out the whole screen and shows only the search text fields.But when we do a search again in the same form there after the sort works.it does not clear out.
This happens for the first search after the form is loaded for the first time from the workflow
appreciate any solution or suggestion
Thanks
PratheepThanks for your reply, it did not work even after setting the sortEnable,
The issue i find is when the any column is clixked for sorting for the first time all the form variables even if it is under Expansion is lost, but when we do the search again (even with different criteria) the same page and hit the sort column again the form variables are retained -
Display Null when the column has a particular date value
Experts,
I have write the below query in Date column,
CASE WHEN Table.Column='Bad A'
THEN CAST(Null as "Table"."Date")
WHEN Table.Column='Bad b'
THEN CAST(Null as "Table"."Date")
ELSE "Table"."Date"END
but I am getting *" Invalid Alias Format : Table_name.Column_name required"*
Please let me know where I did mistake.
Thanks in Advance.
Thanks,
Balaa...Is that Table withe data column that you are using to replace the values in the main column using the case statement is an alias table or physical table? If it is alias table, you might want to try to use physical table instead.
Thanks,
-Amith -
My mouse cursor disappears and does not come back when the mouse is moved.
Ocassionally my cursor disappears, usually when the display has gone to sleep. The mouse is still working because I can "mouse over" places on the screen, they are highlighted, and click on items, but there is no cursor. Fortunately, I can usually find the Apple menu and restart, but having to reboot is annoying. This did not happen before I upgraded to Lion (10.7.1). I am usually connected to an external display when this happens.
I found this in the community. Same problem Mouse pointer disappears on second monitor.
-
IMovie Audio Files Won't Play when the File is Moved
I imported a lot of audio files into iMovie from my desktop and I set them out how I wanted them in my project. But as my desktop was getting too cluttered, I had to move the audio files into a different folder in my documents, but now the audio files won't play and a warning icon is on each audio clip. Is there a simple way to relocate the files, without moving the files back to my desktop and without having to set out my all my audio files all over again?
Besides the two files you mentioned in your post, you also need to upload YOUR .swf as well. Then you need to upload your music file/folder.
Also double check that the path to your mp3 is correct RELATIVE to the location of the Web page that you placed the .swf on, NOT the physical location of the .swf.
var req:URLRequest = new URLRequest("../Sound/dreamsSound1.mp3");
This needs to be the path from the WEB PAGE to the mp3, NOT the path from the physical location of the .swf.
Once you have the pathing correct, it should NOT work when testing in Flash CS4, because the path to the mp3 needs to be RELATIVE to the Web page.
Best wishes and Good Luck!
Adninjastrator -
How to resize Labels size based on the column margin changes in JTable??
I have a constructed JTable with 4 columns. Accordingly, I added 4 JLabels for each column. JTable and JLabels are attached to a scrollpane. That in turn, attached to a JFrame.
What I need is, at the runtime, when I change the column margins of a column in JTable, accordingly, the size/margins of the Labels should change..
I am extending AbstractTableModel in order to populate the data in the table, as I should have a checkbox in the constructed JTable.
Please, help me out in finding a solution for this...Hi pritam,
The “maintain proportions of window for different monitor
resolutions” property will maintain the proportional size of the front panel
(its x and y sizes) when opened in a different resolution. The front panel
objects will not be resized and will appear larger (and may not fit inside the
front panel) when saved in a higher resolution, and moved to a lower
resolution. You can use the “Keep window proportions” property to achieve the
same results.
To have both the front panel dimensions and front panel
controls scale, you need to have both the above property and the “scale all
objects on front panel as the window resizes” selected. The labels will not be
resized by this.
I tried using both properties on two monitors and noticed
that the change does not occur when the resolutions between the monitors are
different. I had to lower both monitors’ resolution to see the change work
properly.
Please post back if you have any questions. Have a great day!
Ryan D.
District Sales Manager for Boston & Northern New England
National Instruments -
How to add pop up menu on the column name of a jtable
hi all,
i am naive to swing .
i want to know that how can i open a pop up menu on the right click of the column of a jtable build in frame.i mean to say i on th eright click on the header of table which has column names.[url http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html#popup]How to Use Popup Menus.
-
Problem faced when automating the P.O and P.O Release transactions
Hi,
I was trying to automate the Purchase Order and Purchase Order Release screen using ECATT tool.
I recorded the Purchase Order screen by importing the Purchase Requisition Number.
When i record the Purchase Order screen, the screen settings was different and when i was replaying the script, the settings was different.
The Problem which i faced was when i was recording the Purchase Order transaction, the header tab was in the expand status.But when i execute the recorded script, the header tab gets collapsed. Because of this change, the Purchasing Org tab value is not passed and it throws an error.
Please help me to find a solution for this problem.
The same happens in Purchase Order release transaction.
When i am recording the Purchase Order Release transaction, the Release Strategy tab is active and when i am replaying the script which i have recorded, it is not the same of what i have recorded.
Therefore, it throws an error.
Kindly help me to get a solution for the problemCan u help me in doing this.
I have not done any script using this Conditional loop. Help me to do this..
If u also have any documents related to this Conditional loop, kindly let me know the links..
Hope u will help me to find a solution.
Regards,
Shriram.S -
I am now using Macbook Pro Yosemite 10.10.2.
I wanted to purchase an app free, Facebook messenger, in the apps store and clicked the tab download, the login window popped up and I put into my password. Then, STATUS_CODE_ERROR in red colour appeared.
Result being the login window could only be cancelled. Why?
I did not find any difficulty to login herein to write this question.
Please help me out, if anybody can.
Thanks.
rrrooshiHi,
Firstly please check if you have installed this update successfully:
Open Windows Update, click View update history, click Installed Updates,check if there is this update.
In addition, based on Microsoft Security Bulletin MS12-020, this security update resolves two privately reported vulnerabilities:
KB2621440 and KB2667402.
http://technet.microsoft.com/en-US/security/bulletin/ms12-020
Karen Hu
TechNet Community Support -
Problem facing when changing configuration characterstic values in SO
Hi Experts,
I am facing a problem when i am chaging sales order configuration characterstic values they are updating perfectly. But when i am creating purchase order with reference to sales order then the sales order configuration currency characterstic values are picking as 0 which are already updated perfectly in sales order.
I am using cl_cbase-> set_configuration method for to update the characterstic currency values.
cl_cbase->set_mark_for_saving after the above method
cl_cbase->save_and_free after the above method.
Would request your suggestions if you have come across this situation.
Advance Thanks
Regards,
Chandra.Hi,
Can do it using Union All is prompt SQL and presentation variable in report.
Refer : http://www.varanasisaichand.com/2010/01/editing-all-choices-in-dashboard.html
Regards,
Srikanth -
Problem faced when installing oracle 10g
i faced this problem when intalling oracle 10g in windows xp. this dos prompt opens for 5 min. and then it get closed..after tht nuthing happens.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4
294967296 Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\ADMINI~1\LOCALS~
1\Temp\OraInstall2006-09-02_03-43-19AM. Please wait ...Check the directory read-write permission and the space on the C:\ Drive C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2006-09-02_03-43-19AM.
Actually Oracle Installer might be trying to create log file and due to above two reason not able to proceed.
Maybe you are looking for
-
Rollback the data in DB Adapter
Hi, I have 2 db adapters, if i got error in 1 db adapter then how to rollback? Thanks in adv, Kpr
-
Please help as when I delete a file it does not appear in my trash can, however it deletes.
-
Hi Experts.. I need your help... I need to make the configuration of itens categories( L and D) from R/3. Is there the possibilty to transfer the itens categories (middleware) from backend to SRM? Where i can make this configuration Iten category in
-
Should I add index on VBRP for performance
Hi All, I developed a Report. Here - SELECT statement of VBRP table is taking too much time for execution. SELECT vbeln posnr netwr matnr INTO TABLE IT_VBRP FOR ALL ENTRIES IN IT_VBAP WHERE AUBEL = IT_VBAP-AUBEL AND AUPOS =
-
Iphone 4S "Search iphone" stopped working
The search function has stopped functioning despite all items being checked in setup. I have Turned on/off and that still does not help. Nothing is being searched. There is typically some feedback when i start to search and presently nothing comes up