Problem filling Arch infostructure for COPA2_S001 - field catalog?

I'm not sure I'm posting this ti the correct forum, but I'll give it a try.
Archivingobject COPA2_S001 is used to archive Copa data (account based CoPa). As the profitability analysis archiving objects depend on the operating concern (generated by the customer), and must also be generated, no appropriate information structures or field catalogs can be delivered as standard with the Archive Information System (SAP AS). You must create these yourself.
This was set up by somenone in the pst, but the Infostructue (the table cretaed for it) stays empty.
The Infostructure is activated, the archiving process shows no errors and even the status info from the AIS shows only green lights!
My guess that the field catalog which was set up is not correct.
Can anyone give my some info how to be sure what the cause, how to solve it and how to fill the AIS without starting a new archiving run.
Thanks in advance!
Ger

Sorry misread the message.
Kind regards,
Robert Loeffen
Message was edited by:
M. van Lieshout

Similar Messages

Using instruction for creating field catalog to archive object "MM_MATNR"

Hi all,
I need a using instruction for creating a new field catalog to archive object "MM_MATNR". I'd like to create a field catalog using some fields of tables mara, makt, mvke and marc.
Thanks for your help!

Hi,
Go to following link;
[Material Master Archiving|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f75a80-867f-2d10-7aa6-ac164e43e89f?quicklink=index&overridelayout=true]

Problem in MARA table for the field PSTAT

Dear all,
I am facing a problem with mara table , for a material it is showing "C" Classification status in MARA table in field PSTAT
But if im going to Transaction MM03 with the same material im not able to find any Classification view there(mm03).
Please help me why is this happening and what is the possible solution for this .
Many Thanks!!!
rewards will be given....

Hi,
In relation to the issue, there are a number of reasons why the
classification view may not be displaying in MM02/MM03:
1. OMS2 customising settings for material type
2. OMT3 customising settings for the screen sequence
3. Authorisation object M_MATE_STA
If these settings are correct, kindly refer to the note 113966.
If there are inconsistencies in the material status in MARA and MARC
then report ZRMMMSTAT outlined in this note should resolve the issue.
Best regards
Erika

Regarding User Exit for SD Field Catalog

Hi All,
I need to insert a field called "Transportation Zone" in the field catalog.
Path: sproF5sales and DistBasic FunctionsPricing-Pricing ControlMaintain Condition Tables..
Now using CMOD Tcode, how to locate the appropriate Exit for this issue...???
Regards
PAvan

Hi Pavan,
You can see these user exits in SE38
To create a new field in the field catalog, the field needs to be put in field catalog with a Z name, say ZZ_TRZONE
Now you have to make changes in these 2 user exits to populate the transportation zone which is coming from masterdata into sales order , into the structure TKOMP ...etc which are populated during pricing. If you achieve that, then the condition records will be updated.
Please let me know if you need further information on this.
Rwd point if it helps.
BTW, These userexits are used only if the field which you want to include in the condition table is not in the list of allowed fields in the field catalog or not in structures KOMG, KOMP, KOMK. If the field is already there in field catalog and in all these structures, then there is no need for user exit. You just need to create the condition table.
Message was edited by:
iimnava

Problem in delta management for custom fields added in standard Table

Hi developers,
we have a problem, when a sales order is modified in a field custom, added in tables (VBAP-VBAK), the delta BW doesn't recognize the modifications. The data type of these fields haven't the flag (Change document) setted in
view Definition.
If this flag is setted, Can the delta BW recognize the modifications of the custom fields?
Best regards
Domenico

You cannot get delta by just appending fields to extract structure & writing the user exit coding as this user exit code is run by the extractor after the X- and Y- tables are compared to create the before & after images.
You have to do this procedure by enhancing LIS comm structures like MCVBAP (for example).
Please refer to OSS note 576886 for complete details.
Kumar Gudiseva.

Problem with F4 option for one field

Hi,
While creating pricing condition records (VK11), one field is not having F4 option. That field is KGKG1 (Condition group1).
Ihave created one table with s.org, dist.channel and condition group1 (KDKG1).
While creating onle this problem. While changing and displaying the F4 option (i am able to select the values from list) available.
What would be the reason. Is it require to change in table like domain, fields.
Please help me to solveit out.
Regards
Lakshmikanth

Hi,
you can create new condition groups here.
IMG>Logistics - General>Business Partner>Customers>Control>Define Condition Groups.
Goto Customer master maintain condition groups.
XD01/02. goto general data , In Menu select Extras and choose additional data. maintain condition group for customer.
Regards,
Chandra

How to create infostructure for my own archiving object?

We created our own archiving objects.
Could you help tell how to create infostructure for each of them?
Any info would be appreciated.

Hi,
Infostructure creation:
1. Create Field Catalog
2. Create Infostructure and assign Field catalog created
3. Activate Infostructure
4. Fill Infostructure
>> Retrieve archived data
Path to create Field Catalog:
Goto SARI >> Customizing >> Environment >> Create Filed catalog
Note: 1. During creation of Field catalog make use of field name from SE11 transaction.
2. Target field and Reference filed should be same and Source table from which you are considering the filed name
3. Key filed name should be Indicated
Path to create Infostructure
Goto SARI >> Customizing >> Environment >> Create Infostructure
Assign Archiving object for which this infostructure is created and assign filed catalog
Activate it.
Path to Fill structure
Goto SARI >> Status >> Select Archiving object and consider option Fill per Infostructure
In Archiving explorer you can retrieve archiving data.
-Thanks,
Ajay

Field Catalogs in ALV

Hi Friends,
Please help me out, I am new to ABAP.
Please anybody explain me the functionality of Field catalogs in ALVs?
How many methods are there to pass data to ALVs, i.e., in how many ways?
Hope u will help me.

hi,
this will be very helpful for ALV REPORTING.....
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain upto 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1.     REUSE_ALV_VARIANT_DEFAULT_GET
2.     REUSE_ALV_VARIANT_F4
3.     REUSE_ALV_VARIANT_EXISTENCE
4.     REUSE_ALV_EVENTS_GET
5.     REUSE_ALV_COMMENTARY_WRITE
6.   REUSE_ALV_FIELDCATALOG_MERGE
7.   REUSE_ALV_LIST_DISPLAY
8.     REUSE_ALV_GRID_DISPLAY
9.     REUSE_ALV_POPUP_TO_SELECT
The different steps used for getting the above function modules into use are:
Step 1
DATA DECLARATION
Sap standard type pools: SLIS , KKBLO .
Sap standard tables types taken from the type pools are: SLIS_LAYOUT_ALV ,
                                         SLIS_T_FIELDCAT_ALV,
SLIS_T_LISTHEADER,
SLIS_T_EVENT,
SLIS_SELFIELD.
Internal tables to used in the program declared based on the above table types
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV,
            I_FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
           I_HEADING TYPE SLIS_T_LISTHEADER,
I_EVENTS TYPE SLIS_T_EVENT.
TYPES: KKBLO_SELFIELD TYPE SLIS_SELFIELD.
Step 2 (Optional)
SELECTING THE VARIANTS FOR INITIAL LIST DISPLAY (DEFAULT VARIANT)
The variants in the list display can be both user-specific and general. The user can programmatically set the initial (default) variant for list display.
The default variant can be found using the function module 'REUSE_ALV_VARIANT_DEFAULT_GET'.
Sample code:
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            i_save     = variant save condition ( A=all, U = user-specific )
       CHANGING
            cs_variant = internal table containing the program name (and the default variant---optional )
       EXCEPTIONS
            not_found = 2.
The user can also choose from the list of existing variants using the function module REUSE_ALV_VARIANT_F4.
Step 3
DEFININING OUTPUT CHARACTERISTICS: PREPARING DISPLAY FIELDS CATALOG
A field catalog is prepared using the internal table (I_FIELDCAT) of type SLIS_T_FIELDCAT_ALV. Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields).
A field catalog is required for every ALV list output to add desired functionality (i.e. Key, Hotspot, Specific headings, Justify, Col. position etc) to certain fields of the output. If not mentioned specifically, then the defaults are taken. The possible values and defaults are listed below.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module.
The minimal field catalog is documented below. This can be done in a routine using a local variable. The user can use the other optional parameters to assign output attributes to different fields in the output, which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
1.     The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE. In this case the attributes of the different fields is taken directly from the table and the attributes (key fields, length, texts etc) need to state explicitly.
2.     all fields in this structure are to be output
3.     The structure name is passed to ALV in the parameter I_STRUCTURE_NAME of the function module REUSE_ALV_LIST_DISPLAY.
All the values entered in the catalog is specific to the particular field whose name is entered in the fieldname FIELDNAME of the fieldcat structure. The name of the table is also entered in the corr. Fieldname TABNAME of the structure.
The different possible attributes are:
     Row_pos (row position): Only relevant if the list output is to be multi-line (two or three lines) by default. So, this attribute can be used maintain certain level of alignment in the output.
                     Value set: 0, 1 3
     Col_pos (column position): This parameter is relevant when the fields in the output are to be different from the sequence of the fields in the internal table used for display.       The parameter specifies the relative column position of the field in the list output. The column order can be changed interactively by the user. If this parameter is initial for all field catalog entries, columns appear in the internal table field sequence.
Value set: 0, 1 60
     Fieldname (field name): This is the name of the internal table field for which the parameters are passed in the catalog.
Value set: internal output table field name (required parameter)
     Tabname (internal output table): Name of the internal output table that contains the field FIELDCAT-FIELDNAME above.
                     Value set: SPACE, internal output table name.
     Ref_fieldname (reference field name): Name of the Data Dictionary field referred to. This parameter is only used when the internal output table field described by the current field catalog entry has a reference to the Data Dictionary (not a program field), and the field name in the internal output table is different from the name of the field in the        Data Dictionary. If the field names are identical, naming the Data Dictionary structure or table in the FIELDCAT-REF_TABNAME parameter is sufficient.
    Value set: SPACE, Data Dictionary field name.
     Ref_tabname (reference table/structure field name): Structure or table name of the referred Data Dictionary field.        This parameter is only used when the internal output table field described by the current field catalog entry has a Data Dictionary reference (not a program field).
Value set: SPACE, name of a Data Dictionary structure or table
Link to currency unit
     Cfieldname (currency unit field name): This is used for currency fields that have a reference to any unit field. This is only relevant for amount columns with associated unit. This parameter contains the Name of the internal output table field containing the currency unit associated with the amount field FIELDCAT-FIELDNAME. The field in FIELDCAT-CFIELDNAME must have its own field catalog entry.
Value set: SPACE, output table field name
     Ctabname (internal currency unit field output table): Name of the internal output table containing the FIELDCAT-CFIELDNAME field.
Value set: SPACE, output table field name.
        Link to measurement unit
     Qfieldname (measurement unit field name): Only relevant for quantity columns with unit link. Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME. The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
Value set: SPACE, output table field name.
     Qtabname (internal measurement unit field output table): Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
Value set: SPACE, output table field name.
     Outputlen (column width): This parameter is used if the desired output length for a field is desired to be different from the internal output table field. For fields with a Data Dictionary link this parameter can be left initial. For fields without a Data Dictionary link (program field) the parameter must be given the value of the desired field list output length (column width).
Initial = column width is the output length of the referred Data Dictionary field (domain).
N = column width is n characters.
      Value set: 0 (initial), n.
     Key (key column): By default, the system makes some fields in the output as key fields, provided the fields are key fields in their referencing table. Using this parameter, fields other than key fields of the referencing table can be made key field. This parameter is most important if the output needs to contain some field which are not scrollable or cannot be hidden.
If the internal output table contains fields that are key fields from different tables, then all those fields in the report output becomes unscrollable and cannot be hidden. So, the fields in the output internal table should not be referenced from tables in which they are key fields. Instead, they should be referenced to the tables in which they are not key fields, incase they are not desired as key field in the output.
'X' = key field (key field output in color) and Key fields can not be interactively hidden. Parameter FIELDCAT-NO_OUT must be left initial.
      Value set: SPACE, 'X'.
     Key_sel (hideable key column): This parameter is only relevant for the fields which are made key fields using FIELDCAT-KEY = 'X'. Using this parameter the Key field can be hidden interactively.
The key column sequence cannot be changed interactively by the user. The output is controlled by the FIELDCAT-NO_OUT parameter analogously to non-key fields.
Value set: SPACE, 'X'.
     No_out (field in field list): This parameter is used to remove certain fields from the output during initial display. The user can however interactively choose the field for output from the field list in the display variant.
            'X' = field is not displayed in the current list.
        Value set: SPACE, 'X'.
     Tech (technical field): This parameter is used to make certain field display only in the field catalog. The fields with this parameter set cannot be output in the list nor can they be displayed interactively from the catalog.
                    'X' = technical field.
       Value set: SPACE, 'X'.
     Emphasize (highlight columns in color): As name suggests, this field parameter is used to highlight certain field with chosen colors.
Value set: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off ,'1'=on).
'X' = column is colored with the default column highlight color.
                    'Cxyz' = column is colored with a coded color:
                  - C: Color (coding must begin with C)
                 - X: color number
                  - Y: bold
                   - Z: inverse
     Hotspot (column as hotspot): This parameter is used to make certain field appear as hotspot i.e. a hand is displayed if the cursor is positioned on the field value. Single click on such fields cause the PICK OR F2 events to happen.
         Value set: SPACE, 'X'.
                    'X' = column cells are output as hotspots.
     Fix_column (fix column): This parameter is used to fix certain columns in the output. All columns to be fixed must have this flag, starting from the left. If a column without this flag is output, only the columns to the left of this column are fixed. The user can change the column fixing interactively.
                     Value set: SPACE, 'X'.
        'X' = column fixed (does not scroll horizontally).
     Do_sum (sum over column): the user can also call this function interactively.
                  Value set: SPACE, 'X'.
'X' = a sum is calculated over this internal output table field.
     No_sum (sums forbidden): No sum can be calculated over this field, although the data type of the field would allow summing.
         Value set: SPACE, 'X'.
     Icon: The parameter displays certain column contents as icons. The internal output table column contents must be valid icon strings.
                    Value set: SPACE, 'X'.
                     'X' = column contents to be output as an icon.
     Symbol: The internal output table column must be a valid symbol character.
Value set: SPACE, 'X'
                    'X' = column contents are to be output as a symbol.
     Just (justification): This parameter is used for alignment of the contents of the output table. This is only relevant for CHAR or NUMC fields in the output internal table. The justification of the column header always follows the justification of the columns. Independent justification of the column header is not possible.
Value set: SPACE, 'R', 'L', and C.
       ' ' = Default justification for this data type
       'R' = right-justified output
       'L' = left-justified output
       'C' = centered output.
     Lzero (leading zeros): By default ALV outputs NUMC fields right-justified without leading zeros. Using this parameter only the NUMC fields can be displayed with leading zeroes.
                   Value set: SPACE, 'X'.
                    'X' = output with leading zeros.
     No_sign (no +/- sign): This parameter is used to suppress the signs of the output fields. It is only relevant for the value fields.
    Value set: SPACE, 'X'.
           'X' = value output without +/ sign.
     No_zero (suppress zeros): Only relevant for value fields.
             Value set: SPACE, 'X'.
                    'X' = suppress zeros.
     Edit_mask (field formatting): To apply the report output formatting options same as in the WRITE statement in report writing.
           Value set: SPACE, template.
The following parameters are used for customizing the texts in the heading of the output of the columns. The texts are taken from the Data Dictionary for fields with a Data Dictionary reference. If this is not desired, the text parameters can also be specified. The Data Dictionary texts are then ignored.
If the user changes the column width interactively, the column header text with the appropriate length is always used.
The interactive function 'Optimize column width' takes account of both the field contents and the column headers: if all field contents are shorter than the shortest column header, the column width depends on the column header.
     The 'long field label' is also used in display variant definition,
        Sort, etc. Popup.
     seltext_l (long field label)
     seltext_m (medium field label)
     seltext_s (short field label)
     reptext_ddic(header) Analogous to the Data element main header
     Ddictxt (specify text) : You can specify with values 'L', 'M', and 'S', the keyword that should always be used as column header. If the column width changes, no attempt is made in this case to find an appropriate header for the new output width.
Value set: SPACE, 'L', 'M', and S.
Sample code:
Suppose I_PO_DETAILS is an internal table containing two fields EBELN (PO number) and EBELP (PO item no).
DATA: L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.     Local variable to hold the parameters
for a particular field of the field catalog
CLEAR L_FIELDCAT.
L_FIELDCAT-TABNAME   = 'I_PO_DETAILS'.
L_FIELDCAT-FIELDNAME = 'EBELN'.
L_FIELDCAT-KEY = 'X'.         The PO no is made the key field,
                      Colored and non scrollable
L_FIELDCAT-HOTSPOT = 'X'.     The po no becomes a hotspot
L_FIELDCAT-SELTEXT_S = P.O No.
L_FIELDCAT-SELTEXT_M = 'P order No'.
L_FIELDCAT-SELTEXT_L = 'Purchase order No'.
APPEND L_FIELDCAT TO I_FIELDTAB.
CLEAR L_FIELDCAT
L_FIELDCAT-TABNAME   = 'I_PO_DETAILS'.
L_FIELDCAT-FIELDNAME = 'EBELN'.
L_FIELDCAT-KEY = 'X'.         The po item no is made the key field,
                           Colored and non scrollable
L_FIELDCAT-SELTEXT_S = 'Item No'.
L_FIELDCAT-SELTEXT_M = 'Item No`.
L_FIELDCAT-SELTEXT_L = 'PO Item No'.
APPEND L_FIELDCAT TO I_FIELDTAB.
CLEAR L_FIELDCAT
Thus the catalog for the report output is prepared.
Step 4
The next step is to build an event table, which are used for firing both user commands and the system dependent events i.e. top of page, end of page etc.
A list of possible events is populated into an event table (I_EVENTS) when this table is passed to the function module REUSE_ALV_EVENT_NAMES_GET. The return table from this function module contains all the possible events.
The function module contains following import and export parameters.
IMPORTING PARAMETERS: I_LIST_TYPE
This parameter has possible values from 0-4.
The parameter I_LIST_TYPE is of TYPE SLIS_LIST_TYPE and is DEFAULT 0 .
EXPORTING PARAMETERS: I_EVENTS table.
This table is of TYPE SLIS_T_EVENT and returns to the program the name of all the possible events.
The table structure contains the fields:
     I_EVENTS-NAME: Name of the Callback event.
I_EVENTS-FORM: Name of the form routine that should be called in the calling program at the event.
Only events with a form routine name are processed.
The I_EVENTS table returns with the following possible constants:
1.     Slis_ev_item_data_expand TYPE slis_formname VALUE 'ITEM_DATA_EXPAND'.
Only relevant for hierarchical-sequential lists using the layout parameter IS_LAYOUT-EXPAND_FIELDNAME of the structure IS_LAYOUT. Exit for passing item entries (ITEM table) for a header record that was expanded interactively by the user.
2.     Slis_ev_reprep_sel_modify TYPE slis_formname VALUE 'REPREP_SEL_MODIFY'.
RS_SELFIELD-TABINDEX contains the header table index for which the item entries are to       be put in the global item output table (T_OUTTAB_SLAVE). The Callback is only called if ALV has no items for a header that is to be expanded.
RFLG_ALL is passed with 'X' if the user shows all items. The application must ensure that    entries are not repeated in the item table.
    RS_SELFIELD is initial in this case.
3.     Slis_ev_caller_exit_at_start TYPE slis_formname VALUE 'CALLER_EXIT'.
Is called at the beginning of the function module to make special settings. It is not usually used.
4.     Slis_ev_user_command TYPE slis_formname VALUE 'USER_COMMAND'.
As this is a frequently-used Callback event, the form routine can also be passed        directly in the interface by passing the user command in the IMPORTING parameter           I_CALLBACK_USER_COMMAND.
5.     Slis_ev_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE'.
   Equivalent to the list processing TOP-OF-PAGE event.
6.     Slis_ev_top_of_coverpage TYPE slis_formname VALUE 'TOP_OF_COVERPAGE'.
The selection information and list status are output together (if they exist) on a separate page by default
7.     Slis_ev_end_of_coverpage TYPE slis_formname VALUE 'END_OF_COVERPAGE'.
Analogously to TOP_OF_COVERPAGE the user can add other information
to the information output by ALV (selection information, list status) at this event.
8.     Slis_ev_foreign_top_of_page TYPE slis_formname VALUE FOREIGN_TOP_OF_PAGE'.
The Top-of-page event is always processed in ALV and is only passed to the caller via the Callback mechanism. This is still the case if the caller, e.g. by a user action, processes a branch list which was not formatted by ALV (e.g. a popup with additional information about the list record selected and displayed by ALV).
In this case, top-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event top-of-page still occurs in ALV. When ALV notices a top-of-page which was not caused by an ALV output, the form routine in FOREIGN_TOP_OF_PAGE is called.
9.     Slis_ev_foreign_end_of_page TYPE slis_formname VALUE 'FOREIGN_END_OF_PAGE'.
The event end-of-page is always processed in ALV and only passed to the caller via callback. This is still the case, e.g. when the caller processes a details list which was not formatted by ALV (e.g. a popup with further information about selected list records which were displayed by ALV).
In this case, end-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event end-of-page still occurs in ALV. When ALV notices an end-of-page that was not caused by an ALV output, the form routine in FOREIGN_END_OF_PAGE is called.
10.     Slis_ev_pf_status_set TYPE slis_formname VALUE 'PF_STATUS_SET'.
If a user list status is to be set, it must be done in the form routine assigned to this event. The ALV function codes, which must not be active, are in the Parameter RT_EXTAB. This table must be passed with the SET PF-STATUS command (with inactive user function codes as well, if necessary).
The STANDARD status of the function group SALV should be used as a          template for a user-specific status. As this is a frequently used Callback event, its form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_PF_STATUS_SET.
11.     Slis_ev_list_modify TYPE slis_formname VALUE 'LIST_MODIFY'.
LIST_MODIFY USING R_TABNAME TYPE SLIS_TABNAME
                                         R_INDEX LIKE SY-TABIX
                                         R_INDEX_ITEM LIKE SY-TABIX
                                         R_INDEX_SUM LIKE SY-TABIX.
12.     Slis_ev_top_of_list TYPE slis_formname VALUE 'TOP_OF_LIST'.
Information output at the start of the list
13.     Slis_ev_end_of_page TYPE slis_formname VALUE 'END_OF_PAGE'.
Information output at the end of a page. This is only called for printing.
14.     Slis_ev_end_of_list TYPE slis_formname VALUE 'END_OF_LIST'.
Information output at the end of the list
15.     Slis_ev_after_line_output TYPE slis_formname VALUE 'AFTER_LINE_OUTPUT'.
Output information after each output line. Should only be used in justified cases because it costs a lot of performance.
16.     Slis_ev_before_line_output TYPE slis_formname VALUE   'BEFORE_LINE_OUTPUT'.
Output information before each output line. Should only be used in justified cases because it costs a lot of performance.
17.     Slis_ev_subtotal_text TYPE slis_formname VALUE 'SUBTOTAL_TEXT'.
This event table (I_EVENTS) is now checked with the desired constants. If the desired constant is found, then the corresponding field for the FORM NAME is populated with the name of the routine containing the corresponding event.
Sample code :
FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE', FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA: L_I_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
           I_LIST_TYPE = 0
       IMPORTING
            ET_EVENTS   = I_EVENTS.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                           INTO L_I_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_TOP_OF_PAGE TO L_I_EVENT-FORM.
    APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
                           INTO L_I_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_END_OF_PAGE TO L_I_EVENT-FORM.
    APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
CLEAR L_I_EVENT.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND
                           INTO L_I_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_USER_COMMAND TO L_I_EVENT-FORM.
    APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
This will prepare the events table for the report.
The report will contain three forms for the above events:
1.     FORM TOP_OF_PAGE : This form will contain the top of page event for the report i.e header etc
Using the function module REUSE_ALV_COMMENTARY_WRITE, the internal table containing the headings for top of page event can be passed to the list output. Also, any logo specific to the report can be passed to the function module.
2.     FORM END_OF_PAGE : This form will contain the end of page event for the report i.e footer etc
3.     FORM USER_COMMAND : This form will contain the desired user command i.e pick/line selection
Step 5
A layout is build for the report output list description USING the internal table declared above (I_LAYOUT).
Output list description structure.
     The parameters are described under the following heads:
     Display options
     Exceptions
     Totals
     Interaction
     Detail screen
     Display variants (only for hierarchical-sequential lists)
     Color
     Other
The layout table is of type slis_layout_alv_spec and has the following fields:
Display options
1. Colwidth_optimize (1) TYPE c: This parameter optimizes the length of the different columns in the output. The width of the different col. now depends on the max. Length of the data in the column.
Value set: SPACE, 'X'
'X' = optimizes the column width so that all contents are displayed completely.
2. No_colhead(1) TYPE c : This parameter suppresses the column headings
Value set: SPACE, 'X'.
'X' = column headers are not output
3. No_hotspot(1) TYPE c : The heading of the report output are not output as hotspot.
Value set: SPACE, 'X'.
'X' = column headers are not output as hotspot
4. Zebra(1) TYPE c : The report is output in the striped pattern.
Value set: SPACE, 'X'.
'X' = striped pattern (e.g. for wide lists)
5. No_vline(1) TYPE c : The report output contains columns only separated by space and no lines. It is not relevant for: hierarchical-sequential lists and multiple-line lists.
Value set: SPACE, 'X'.
'X' = columns separated by SPACE
6. No_min_linesize(1) TYPE c : The report line size is equal to the width of the list. It is not relevant for block lists.
Value set: SPACE, 'X.
'X' = line size depends on list width
' ' = Line size is set to 80 or MIN_LINESIZE (if > 0) .
7. Min_linesize LIKE sy-linsz: The report output contains a minimum possible length of line. If initial min_linesize is set to 80 by default, then this parameter is used to customize it. The prerequisite for this is that the parameter no_min_linesize should be ' '.
Value set: 0, 10 - 250
If the list is wider, the format uses the list width (maximum 250 or MAX_LINESIZE (if > 0)).
8. Max_linesize LIKE sy-linsz: The default max. Linesize is 250. To change this default value, this parameter can interactively-define the maximum list width setting.
Value set: 0, 80 - 1020
9. Window_titlebar LIKE rsmpe-tittext: To set the titlebar on the report output.
           10. No_uline_hs(1) TYPE c.
Exceptions
11. Lights_fieldname TYPE slis_fieldname: Internal output table field containing the codes of exceptions to be output.
                  Output table field code: '1' = red traffic light
                                '2' = yellow traffic light
                                     '3' = green traffic light Fieldname for exception
     Value set: SPACE, internal output table field name.
12. Lights_tabname TYPE slis_tabname: Name of the internal output table that contains the field in the parameter LIGHTS_FIELDNAME. If LIGHTS_FIELDNAME is not empty, this field must also be filled for hierarchical-sequential lists. Only relevant for hierarchical-sequential lists.
.     Value set: SPACE, internal output table name.
13. Lights_rollname LIKE dfies-rollname: The documentation of this data element is displayed when you call F1 help for an exception column.
Value set: SPACE, data element name.
           14. Lights_condense(1) TYPE c : If a list record is output with 'red traffic light', each
           Subtotal that includes this record is also output with 'red traffic light'.
           Value set: SPACE, 'X'
           'X' = the 'maximum' exception of the items in the subtotal is output at subtotal level.
Sums
15. No_sumchoice(1) TYPE c : This parameter allows the choice for summing up
Only by fieldcatalog.
Value set: SPACE, 'X'
'X' = fields which are to be summed, passed by the calling program (FIELDCAT-DO_SUM = 'X'). The user should not be able to change this value interactively.
16. No_totalline(1) TYPE c : Removes the option of having totals after sub-totals.
Value set: SPACE, 'X'
'X' = no total record is to be output. Subtotals can still be calculated and output. The fields in the subtotals are flagged DO_SUM = 'X' in the field list.
17. No_subchoice(1) TYPE c : Does not allow the user to interactively change the field chosen for subtotals.
Value set: SPACE, 'X'
'X' = value whose change triggers subtotals, provided by the calling program. The user should not be able to change this value interactively.
18. No_subtotals(1) TYPE c : No subtotals possible
Value set: SPACE, 'X'
'X' = no subtotals.
19. Numc_sum(1) TYPE c : Totals only possible for NUMC-Fields.
20. No_unit_splitting TYPE c: No separate total lines by inh.units
21.totals_before_items TYPE c: Display totals before the items
22. Totals_only(1) TYPE c : Show only totals
Value set: SPACE, 'X'
'X' = only total records are output.
23. Totals_text(60) TYPE c : Text for 1st col. in totals
Value set: SPACE, string (max.60)
' ' = The first column in the total record contains an appropriate number of '*'s to indicate the total by default. If the first column is wide enough, the string 'Total' is output after the asterisks.
'String = The string passed is output after the total indicated by '*', if the column is wide enough.
24. Subtotals_text(60) TYPE c : Texts for subtotals
Value set: SPACE, string (max.60)
' ' = In the first column of subtotal records, the subtotal is indicated by an appropriate number of '*' by default. If the first column is not a subtotal criterion, the string 'Total' is output after the asterisks, if the column is wide enough.
'String = the string passed is output after the subtotal indicated by '*', if the column is wide enough and the first column is not a subtotal criterion. If it is a subtotal criterion, its value is repeated after the total, if the column is wide enough.
Interaction
25. Box_fieldname TYPE slis_fieldname: Fieldname for checkbox in the report output. If the list has checkboxes at the start of records (for selecting several records), this parameter contains the internal output table field name indicated by the checkbox selection column. The field is a checkbox at the start of list records without a list header.
Value set: SPACE, internal output table field name
26. Box_tabname TYPE slis_tabname: Name of the internal output table that contains the field in the parameter BOX_FIELDNAME. If BOX_FIELDNAME is not empty, this field must also be filled for hierarchical-sequential lists.
Value set: SPACE, internal output table name.
27. Box_rollname LIKE dd03p-rollname: rollname for checkbox
28. Expand_fieldname TYPE slis_fieldname: fieldname flag expand. The user can show or hide the items by clicking on the folder symbol (hotspot). If the items for a header entry are only to be read by the calling program and passed to ALV when a header has been expanded interactively, this can be controlled via the CALLBACK event        'ITEM_DATA_EXPAND'.
29. Hotspot_fieldname TYPE slis_fieldname: Used to make the fieldname flag hotspot.
30. No_input(1) TYPE c : The fields are only display fields.
      Value set: SPACE, 'X'
'X' = all ready-for-input fields in a list are displayed as not ready-for-input. (Record selection checkboxes and fields which can be made ready-for-input via the field list parameter FIELDCAT-INPUT = 'X')
31. F2code LIKE sy-ucomm: To assign an ALV standard function code to double-click (F2), assign the function code to this parameter. Ex.: to assign the ALV standard function 'Detail' ('&ETA') to F2.
                  => LAYOUT-F2CODE = '&ETA'.
Value set: SPACE, function code
32. Confirmation_prompt: confirm. Prompt when leaving
Value set: SPACE, 'X'
'X' = if one of the functions Back (F03)', Exit (F15)' or Cancel (F12)' occurs, a confirmation prompt appears.
33. Key_hotspot(1) TYPE c : The key fields are displayed as hotspot. The columns defined in the field catalog as key fields (FIELDCAT-KEY = 'X') are output as hotspots, i.e. clicking on a key column (highlighted in color in the list) calls the function under F2.
Value set: SPACE, 'X'.
34. Reprep(1) TYPE c : report report interface active.
35. Group_buttons(1) TYPE c : group-buttons for COL1 - COL5 . Group output fields via FIELDCAT-SP_GROUP in the field list, and pass the group name to the list module in the interface parameter IT_SPECIAL_GROUPS.
Value set: SPACE, 'X'.
36. No_keyfix(1) TYPE c : Used to make the key fields scrollable.
Value set: SPACE, 'X'.
' ' = The key columns defined in the field catalog by FIELDCAT-KEY = 'X' are fixed in the list output. These columns do not scroll horizontally. The item table key columns are fixed in hierarchical-sequential lists. The header table key fields are not considered here.
'X' = key columns not fixed
37. Get_selinfos(1) TYPE c : To read selection screen.
Value set: SPACE, 'X'.
If the calling program is a report with an ABAP/4 selection screen, setting this parameter makes ALV read the selection screen again. If the selections are read successfully, a pushbutton, via which the user can call a popup which lists the report selections in a simple form, becomes active on the results list output by ALV.
38.     group_change_edit(1) TYPE c : Settings by user for new group
Value set: SPACE, 'X'
'X' = the user can enter a format option for each sort criterion in the sort/subtotal popup, for the list format when this value changes (e.g. new page or underline).
39.     No_scrolling(1) TYPE c : Does not allow scrolling of the list to the right.
Value set: SPACE, 'X'.
40. Expand_all(1) TYPE c : Expand all positions
Detailed screen
40.     Detail_popup(1) TYPE c : show detail in popup.
Value set: SPACE, 'X'
' ' = List record detail display in full-screen mode, with top-of-page.
'X' = list record detail display in popup (without top-of-page).
41. Detail_initial_lines(1) TYPE c : show also initial lines
Value set: SPACE, 'X'
' ' = Only fields whose contents are not initial are output in the detail view.
'X' = initial field contents are also output in detail.
41.     detail_titlebar(30) type c : Titlebar for detail screen
Value set: SPACE, string (max.30)
` ' = ' Detail: Display' is output as the title of the detail window.
              'String = the string passed is output as the title of the detail window.
Display variants
42. Header_text (20) TYPE c: Text for header button. Only relevant for hierarchical-sequential lists. You can toggle between display field and field list views via pushbuttons in the display variant definition popup for hierarchical-sequential lists. The views refer to the hierarchy level of the fields. This is technically a toggle between the header table and item table fields.
Value set: SPACE, CHAR (20)
' ' = The header table field pushbutton text is 'Header' by default.
CHAR (20) = header table field pushbutton text.
43.item_text(20) TYPE c : Text for item button. Only relevant for hierarchical-sequential lists. You can toggle the view between the display fields and the field list via pushbuttons in the display variant definition popup for hierarchical-sequential lists. The views refer to the hierarchy level of the fields. This is technically a toggle between the header table and item table fields.
Value set: SPACE, CHAR (20)
' ' = The pushbutton text for the item table fields is 'Item' by default.
CHAR (20) = item table field pushbutton text.
44.default_ item(1) TYPE c : Items as default. Only relevant for hierarchical-sequential lists.
     Value set: SPACE, 'X'
' ' = The header table fields are displayed by default in the display variant definition popup. The user can switch to the item table fields interactively.
'X' = the item table fields are displayed by default in the display variant Definition Popup.    The user can switch to the header table fields interactively.
Colour
45. Info_fieldname TYPE slis_fieldname: infofield for listoutput. A whole list record can be colored individually using a color code in a column of the internal output table for the record. Assign the name of the field containing the color code to this parameter.
Value set: SPACE, internal output table field name
The internal output table field must be of type CHAR(3).
The code must have the following syntax: 'Cxy':
        C = color (all codes must start with 'C')
        X = color number ('1'-'9')
        Y = bold ('0' = off, '1' = on)
46. Coltab_fieldname TYPE slis_fieldname: Cells can be colored individually using a color code which is contained in a column of the internal output table for the record containing the cell. Assign the name of the field to this parameter.
Others
47. List_append(1) TYPE c : no call screen. It is only useful to output block-lists without specifying the above modules if the number of list blocks exceeds, or may exceed, the maximum number specified in the block module documentation. These operations are not possible for user-defined block lists.
Example code :
       I_LAYOUT-f2code       = ws_fcode.
       I_LAYOUT-zebra        = 'X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-no_keyfix = 'X'.
I_LAYOUT-get_selinfos = 'X'.
I_LAYOUT-no_hotspot = 'X'.
       I_LAYOUT-no_input = 'X'.
I_LAYOUT-hotspot_fieldname = FIELDNAME.
I_LAYOUT-no_input          = X.
I_LAYOUT-no_vline          = `X.
I_LAYOUT-no_colhead        = .
I_LAYOUT-lights_condense   = ` `.
I_LAYOUT-totals_text       = ` `.
I_LAYOUT-subtotals_text    = ` `.
I_LAYOUT-totals_only       = ` `.
I_LAYOUT-key_hotspot       = X.
I_LAYOUT-detail_popup      = X.
I_LAYOUT-group_change_edit = X.
I_LAYOUT-GROUP_BUTTONS     = X.
Step 6
This step is required to get the selection screen information in the report output.
The prerequisite for this is to set the parameter LAYOUT-GET_SELINFOS of the IMPORTING structure.
The parameters to be passed in the IS_SEL_HIDE table are:
o mode:              'R' = only the entries passed in the internal table IS_SEL_HIDE-T_ENTRIES
Are output in the pop up. Selection info, which the list tool read in the selection screen (when called by a report with a selection screen), is replaced by the values passed.
'S' = the selection info which the list tool read in the selection screen of the calling report are modified by the entries in the table IS_SEL_HIDE-T_ENTRIES.
o t_entries:         Selection info table
o t_entries-mode:   'A' = output the selection info for the current table record in the info popup.
'D' = do not output select option or SELNAME parameter selection info in   the popup.
o t_entries-selname: (only used in t_entries-mode = 'D') : Name of the select option or parameter.
The following table fields are only used in t_entries-mode = 'A'. They contain the selection information to be added.
     t_entries-field: DDIC field name of the field for which selection information is to be output.
     t_entries-table: DDIC table names of t_entries-field.
     t_entries-stext: Field name in info popup.
     If t_entries-field and t_entries-table have been entered, this text is taken from DDIC.
     t_entries-valuf: Selection condition 'from' value (external format)
     t_entries-valut: Selection condition 'to' value (external format)
     t_entries-sign0: (I)nclusive (E)xclusive
     t_entries-option: All values of the select options Option field allowed.
Step 6
The Table IT_SORT is populated with the sort criteria for the different fields.
The caller specifies the sorting and/or subtotaling of the basic list in the internal table IT_SORT.
This internal table has the following fields:
     o spos : Sort sequence
     o fieldname : Internal output table field name
     o tabname : Only relevant for hierarchical-sequential lists. Name of the internal output table.
     o up : 'X' = sort in ascending order
     o down : 'X' = sort in descending order
     o subtot : 'X' = subtotal at group value change
     o group : '* ' = new page at group value change ,'UL' = underline at group value change
                         Step 7
The final step in the output of the report is the use of two ALV functions modules.
1.     REUSE_ALV_FIELDCATALOG_MERGE
2.     REUSE_ALV_LIST_DISPLAY
The first function module is used to pass the field catalog to the report output and merge it with the internal output table.
FUNCTION reuse_alv_fieldcatalog_merge.
""Lokale Schnittstelle:
* IMPORTING
*"             VALUE(I_PROGRAM_NAME) LIKE SY-REPID OPTIONAL
*"             VALUE(I_INTERNAL_TABNAME) TYPE SLIS_TABNAME OPTIONAL
*"             VALUE(I_STRUCTURE_NAME) LIKE DD02L-TABNAME OPTIONAL
*"             VALUE(I_CLIENT_NEVER_DISPLAY) TYPE SLIS_CHAR_1
*"                             DEFAULT 'X'
*"             VALUE(I_INCLNAME) LIKE TRDIR-NAME OPTIONAL
*"       CHANGING
*"             VALUE(CT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV
*"       EXCEPTIONS
*"              INCONSISTENT_INTERFACE
*"              PROGRAM_ERROR
Import parameters
I_PROGRAM_NAME: Program in which the internal output table is declared and populated
I_INTERNAL_TABNAME: Internal output table name
I_STRUCTURE_NAME: Structure name (structure, table, and view)
I_CLIENT_NEVER_DISPL: Hide client fields default X
I_INCLNAME: Data declarations include name
CHANGING parameter
CT_FIELDCAT: Field catalog with field descriptions
The variant based on a program-internal table should only be used for rapid prototyping since the following restrictions apply:
1.   Performance is affected since the code of the table definition must always be read and interpreted at runtime.
2.   Dictionary reference are only considered if the keywords LIKE or INCLUDE STRUCTURE (not TYPE) are used.
Step 8
The other function module is used to display the internal output table with the contents
FUNCTION reuse_alv_list_display.
""Lokale Schnittstelle:
* IMPORTING
*"             VALUE(I_INTERFACE_CHECK) DEFAULT SPACE
*"             VALUE(I_CALLBACK_PROGRAM) LIKE SY-REPID DEFAULT SPACE
*"             VALUE(I_CALLBACK_PF_STATUS_SET) TYPE SLIS_FORMNAME
*"                             DEFAULT SPACE
*"             VALUE(I_CALLBACK_USER_COMMAND) TYPE SLIS_FORMNAME
*"                             DEFAULT SPACE
*"             VALUE(I_STRUCTURE_NAME) LIKE DD02L-TABNAME OPTIONAL
*"             VALUE(IS_LAYOUT) TYPE SLIS_LAYOUT_ALV OPTIONAL
*"             VALUE(IT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV OPTIONAL
*"             VALUE(IT_EXCLUDING) TYPE SLIS_T_EXTAB OPTIONAL
*"             VALUE(IT_SPECIAL_GROUPS) TYPE SLIS_T_SP_GROUP_ALV
*"                             OPTIONAL
*"             VALUE(IT_SORT) TYPE SLIS_T_SORTINFO_ALV OPTIONAL
*"             VALUE(IT_FILTER) TYPE SLIS_T_FILTER_ALV OPTIONAL
*"             VALUE(IS_SEL_HIDE) TYPE SLIS_SEL_HIDE_ALV OPTIONAL
*"           VALUE(I_DEFAULT) DEFAULT 'X'
"             VALUE(I_SAVE) DEFAULT SPACE
"             VALUE(IS_VARIANT) LIKE DISVARIANT
"                             STRUCTURE DISVARIANT DEFAULT SPACE
"             VALUE(IT_EVENTS) TYPE SLIS_T_EVENT OPTIONAL
"             VALUE(IT_EVENT_EXIT) TYPE SLIS_T_EVENT_EXIT OPTIONAL
"             VALUE(IS_PRINT) TYPE SLIS_PRINT_ALV OPTIONAL
"             VALUE(IS_REPREP_ID) TYPE SLIS_REPREP_ID OPTIONAL
"             VALUE(I_SCREEN_START_COLUMN) DEFAULT 0
"             VALUE(I_SCREEN_START_LINE) DEFAULT 0
"             VALUE(I_SCREEN_END_COLUMN) DEFAULT 0
"             VALUE(I_SCREEN_END_LINE) DEFAULT 0
"       EXPORTING
"             VALUE(E_EXIT_CAUSED_BY_CALLER)
"             VALUE(ES_EXIT_CAUSED_BY_USER) TYPE SLIS_EXIT_BY_USER
"       TABLES
"              T_OUTTAB
"       EXCEPTIONS
"              PROGRAM_ERROR
Import parameters
I_INTERFACE_CHECK: Interface consistency check log output.
I_CALLBACK_PROGRAM: Name of the calling program
I_CALLBACK_PF_STATUS_SET: Set EXIT routine to status.
I_CALLBACK_USER_COMMAND: EXIT routine for command handling
I_STRUCTURE_NAME: Internal output table structure name
IS_LAYOUT: List layout specifications
IT_FIELDCAT: Field catalog with field descriptions
IT_EXCLUDING: Table of inactive function codes
IT_SPECIAL_GROUPS: Grouping fields for column selection
IT_SORT: Sort criteria for first list display
IT_FILTER: Filter criteria for first list output
IS_SEL_HIDE     : Selection information modification
I_DEFAULT:      Initial variant active/inactive logic
I_SAVE: Variants can be saved
IS_VARIANT     : Variant information
IT_EVENTS: Table of events to perform IT_EVENT_EXIT : Standard fcode exit requests table
IS_PRINT: Print information
IS_REPREP_ID: Initialization keys for Re/Re interface
I_SCREEN_START_COLUMN: Coordinates for list in dialog box
I_SCREEN_START_LINE: Coordinates for list in dialog box
I_SCREEN_END_COLUMN: Coordinates for list in dialog box
I_SCREEN_END_LINE: Coordinates f

Field catalog in alv with classes(OOPS)

please refer the code below of field catalog prepared.
this code is for preparing field catalog using ALV and OOPS.In the below field catalog, do_sum is not working.it is going to dump.
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'VBELN1'.
ls_fcat-ref_field = 'VBELN'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Invoice No'.
ls_fcat-seltext = 'Invoice No'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'DMBTR'.
ls_fcat-ref_field = 'DMBTR'.
ls_fcat-ref_table = 'BSAD'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ENDFORM. "PREPARE_FIELD_CATALOG
I would apreciate u response.
regards,
veera.

Hello Veeranjaneyulu
I prefer to use function module LVC_FIELDCATALOG_MERGE to build my fieldcatalogs.
If you need fields from different structure that is no problem. Simply call the function module for each structure and collect the result in the same itab (e.g. lt_fcat).
Finally, you delete all fields that you do not need.
If the order is important to you then re-order the fields:
LOOP AT lt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY lt_fcat from ls_fcat.
ENDLOOP.
Regards
Uwe

Alv subtotals and grand total for a field

Hi friends,
I Have an internal table ITAB1
in that i have a senario as below.
In my GRID display iam getting values in the layou as follows
BUKRS = 1000
LIFNR MATNR STCST
100 abc 500,00
100 pqr 400,00
100 xyz 200,00
 sub total
200 pto 700,00
200 vbr 900,00
 sub total
BUKRS = 2000
LIFNR MATNR STCST
150 abc 500,00
150 pqr 400,00
150 xyz 200,00
 sub total
260 pto 700,00
260 vbr 900,00
 sub total
 GRAND TOTAL =
Now my requirement is at the end of every vendor i need sub total for STCST field.
and at the end of every company code i need GRAND TOTAL for STCST field.
Its alv grid display.
how can i do that.
Regards,
Priyanka.

Check this sample code may it will help u:
*& Report Z_ALV_SUBTOTAL
REPORT z_alv_subtotal.
*& Table declaration
TABLES: ekko.
*& Type pool declaration
TYPE-POOLS: slis. " Type pool for ALV
*& Selection screen
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.
*& Type declaration
* Type declaration for internal table to store EKPO data
TYPES: BEGIN OF x_data,
 ebeln TYPE char30, " Document no.
 ebelp TYPE ebelp, " Item no
 matnr TYPE matnr, " Material no
 matnr1 TYPE matnr, " Material no
 werks TYPE werks_d, " Plant
 werks1 TYPE werks_d, " Plant
 ntgew TYPE entge, " Net weight
 gewe TYPE egewe, " Unit of weight
 END OF x_data.
*& Internal table declaration
DATA:
* Internal table to store EKPO data
i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
* Internal table for storing field catalog information
i_fieldcat TYPE slis_t_fieldcat_alv,
* Internal table for Top of Page info. in ALV Display
i_alv_top_of_page TYPE slis_t_listheader,
* Internal table for ALV Display events
i_events TYPE slis_t_event,
* Internal table for storing ALV sort information
i_sort TYPE slis_t_sortinfo_alv,
i_event TYPE slis_t_event.
*& Work area declaration
DATA:
wa_ekko TYPE x_data,
wa_layout TYPE slis_layout_alv,
wa_events TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.
*& Constant declaration
CONSTANTS:
 c_header TYPE char1
 VALUE 'H', "Header in ALV
 c_item TYPE char1
 VALUE 'S'.
*& Start-of-selection event
START-OF-SELECTION.
* Select data from ekpo
SELECT ebeln " Doc no
 ebelp " Item
 matnr " Material*
 matnr " Material*
 werks " Plant*
 werks " Plant*
 ntgew " Quantity
 gewei " Unit
 FROM ekpo
 INTO TABLE i_ekpo
 WHERE ebeln IN s_ebeln
 AND ntgew NE '0.00'.
IF sy-subrc = 0.
 SORT i_ekpo BY ebeln ebelp matnr .
ENDIF.
* To build the Page header
PERFORM sub_build_header.
* To prepare field catalog
PERFORM sub_field_catalog.
* Perform to populate the layout structure
PERFORM sub_populate_layout.
* Perform to populate the sort table.
PERFORM sub_populate_sort.
* Perform to populate ALV event
PERFORM sub_get_event.
END-OF-SELECTION.
* Perform to display ALV report
PERFORM sub_alv_report_display.
*& Form sub_build_header
* To build the header
* No Parameter
FORM sub_build_header .
* Local data declaration
DATA: l_system TYPE char10 , "System id
 l_r_line TYPE slis_listheader, "Hold list header
 l_date TYPE char10, "Date
 l_time TYPE char10, "Time
 l_success_records TYPE i, "No of success records
 l_title(300) TYPE c. " Title
* Title Display
l_r_line-typ = c_header. " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR l_r_line.
* Run date Display
CLEAR l_date.
l_r_line-typ = c_item. " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR: l_r_line,
 l_date.
ENDFORM. " sub_build_header
*& Form sub_field_catalog
* Build Field Catalog
* No Parameter
FORM sub_field_catalog .
* Build Field Catalog
PERFORM sub_fill_alv_field_catalog USING:
 '01' '01' 'EBELN' 'I_EKPO' 'L'
 'Doc No'(003) ' ' ' ' ' ' ' ',
 '01' '02' 'EBELP' 'I_EKPO' 'L'
 'Item No'(004) 'X' 'X' ' ' ' ',
 '01' '03' 'MATNR' 'I_EKPO' 'L'
 'Material No'(005) 'X' 'X' ' ' ' ',
 '01' '03' 'MATNR1' 'I_EKPO' 'L'
 'Material No'(005) ' ' ' ' ' ' ' ',
 '01' '04' 'WERKS' 'I_EKPO' 'L'
 'Plant'(006) 'X' 'X' ' ' ' ',
 '01' '04' 'WERKS1' 'I_EKPO' 'L'
 'Plant'(006) ' ' ' ' ' ' ' ',
 '01' '05' 'NTGEW' 'I_EKPO' 'R'
 'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.
ENDFORM. " sub_field_catalog
*& Form sub_fill_alv_field_catalog
*& For building Field Catalog
*& p_rowpos Row position
*& p_colpos Col position
*& p_fldnam Fldname
*& p_tabnam Tabname
*& p_justif Justification
*& p_seltext Seltext
*& p_out no out
*& p_tech Technical field
*& p_qfield Quantity field
*& p_qtab Quantity table
FORM sub_fill_alv_field_catalog USING p_rowpos TYPE sycurow
 p_colpos TYPE sycucol
 p_fldnam TYPE fieldname
 p_tabnam TYPE tabname
 p_justif TYPE char1
 p_seltext TYPE dd03p-scrtext_l
 p_out TYPE char1
 p_tech TYPE char1
 p_qfield TYPE slis_fieldname
 p_qtab TYPE slis_tabname.
* Local declaration for field catalog
DATA: wa_lfl_fcat TYPE slis_fieldcat_alv.
wa_lfl_fcat-row_pos = p_rowpos. "Row
wa_lfl_fcat-col_pos = p_colpos. "Column
wa_lfl_fcat-fieldname = p_fldnam. "Field Name
wa_lfl_fcat-tabname = p_tabnam. "Internal Table Name
wa_lfl_fcat-just = p_justif. "Screen Justified
wa_lfl_fcat-seltext_l = p_seltext. "Field Text
wa_lfl_fcat-no_out = p_out. "No output
wa_lfl_fcat-tech = p_tech. "Technical field
wa_lfl_fcat-qfieldname = p_qfield. "Quantity unit
wa_lfl_fcat-qtabname = p_qtab . "Quantity table
IF p_fldnam = 'NTGEW'.
 wa_lfl_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_lfl_fcat TO i_fieldcat.
CLEAR wa_lfl_fcat.
ENDFORM. " sub_fill_alv_field_catalog
*& Form sub_populate_layout
* Populate ALV layout
* No Parameter
FORM sub_populate_layout .
CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'." Optimization of Col width
ENDFORM. " sub_populate_layout
*& Form sub_populate_sort
* Populate ALV sort table
* No Parameter
FORM sub_populate_sort .
* Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
* Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM. " sub_populate_sort
*& Form sub_get_event
* Get ALV grid event and pass the form name to subtotal_text
* event
* No Parameter
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'.
DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 4
 IMPORTING
 et_events = i_event
 EXCEPTIONS
 list_type_wrong = 0
 OTHERS = 0.
* Subtotal
READ TABLE i_event INTO l_s_event
 WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
 MOVE c_formname_subtotal_text TO l_s_event-form.
 MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.
ENDFORM. " sub_get_event
*& Form sub_alv_report_display
* For ALV Report Display
* No Parameter
FORM sub_alv_report_display .
DATA: l_repid TYPE syrepid .
l_repid = sy-repid .
* This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = l_repid
 i_callback_top_of_page = 'SUB_ALV_TOP_OF_PAGE'
 is_layout = wa_layout
 it_fieldcat = i_fieldcat
 it_sort = i_sort
 it_events = i_event
 i_default = 'X'
 i_save = 'A'
 TABLES
 t_outtab = i_ekpo
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.
ENDFORM. " sub_alv_report_display
* FORM sub_alv_top_of_page
* Call ALV top of page
* No parameter
FORM sub_alv_top_of_page. "#EC CALLED
* To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = i_alv_top_of_page.
ENDFORM. "alv_top_of_page
*& Form subtotal_text
* Build subtotal text
* P_total Total
* p_subtot_text Subtotal text info
FORM subtotal_text CHANGING
 p_total TYPE any
 p_subtot_text TYPE slis_subtot_text.
* Material level sub total
IF p_subtot_text-criteria = 'MATNR'.
 p_subtot_text-display_text_for_subtotal
 = 'Material level total'(009).
ENDIF.
* Plant level sub total
IF p_subtot_text-criteria = 'WERKS'.
 p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
ENDIF.
ENDFORM. "subtotal_text
Edited by: Joyjit Ghosh on Aug 21, 2008 5:25 PM

Error in field catalog in ALV grid display using classes at do_sum = "X'.

Hi,
I'm using classes in ALV Grid display.
the code for the field catalog is going to dump because of the statement in the field catalog for field 'netwr',do_sum = 'X'.
that do_sum = 'X' is not working and going to dump when executed.with out that do_sum it is working fine. the error in dump analysys is showing sap standard incude LSLVCF01.
 assign component
 <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
 if sy-subrc ne 0.
 message x000(0k).
 endif.
sy-subrc is 4 when the program is being executed.
CODE:
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'VBELN1'.
ls_fcat-ref_field = 'VBELN'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Invoice No'.
ls_fcat-seltext = 'Invoice No'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'BUDAT'.
ls_fcat-ref_table = 'BKPF'.
ls_fcat-coltext = 'Invoice Date'.
ls_fcat-seltext = 'Invoice Date'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'NETWR'.
ls_fcat-ref_field = 'NETWR'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-datatype = 'CURR'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ENDFORM.
can u please look in the code and rectify the error,
would appeciate ur response.
regards,
veera.

Hi,
try this..
ls_fcat-fieldname = 'NETWR'.
ls_fcat-ref_field = 'NETWR'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-datatype = 'CURR'.
ls_fcat-do_sum = 'X'.
ls_fcat-cfieldname = 'WAERS'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
Regards
vijay

Field catalog update in ALV grid

Hi All,
When you're changing an existing field catalog in an ALV grid, there's a possibility this change will not appear immediately in the list display.
Can anyone explain this,
Kind regards,
Rob Makelaar.
The Netherlands

Hi Rob
ALV as an encapsulated object uses some kind of buffer for the field catalog. You can switch buffer capabilities with the parameter "I_BUFFER_ACTIVE" of the method "set_table_for_first_display".
The use of this parameter is explained as follows:
Flag to be set by the application if the method call is static. This means the method is always called with the same field catalog. In this case, the field catalog can be held in a special buffer. This accelerates the display of small lists, in particular.
And as an additional point, you should have marked this thread as a question thread since you require some answer. If you want so, you can do this by editing your original post and check relevant checkbox under the editbox. This way you can reward points to helpful posts using the scala at the left of each particular post and you can mark a question as solved to save SDNers's times.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Adding New fields to field catalog

Hi friends, i have comeup with a requirement. its related to output determination. the output have to be sent based on certain criteria. for this we decided to create a new condition table(Acess) and add it in the Access sequence. To create a condition table we need to select the fields from the "Field Catalog". so for this the field should be avilable in the field catalog. Since the field we are going to use is a new Zfield the field is not avilable in the "Output field Catalog".
What to be done to make the field avilable in the 'Output field catalog'
Can anyone give some input on this? Thanks in advance.

Hi Srini,
Following are the activities.
1. Find out what are the output communication structures involved in that output condition table. To find that, go to field catalog, and enter a new field called "test". Then it will give you a message "The field test is not a part of the communication structures KOMB, KOMPBV* KOMKBV*where * equals 1, 2 or 3 based on whether the output is for order, delivery or billing documents. For delivery document it is KOMPBV2, KOMKBV2 and KOMB.
2. Now having known the communication structures for the field catalog, go to all these structures in SE11 and append these structures with a new field say ZZ_SOLD TO PARTY with the relevant data element and domain.
3. To populate the field while doing transactions, you have to represent this field by a foreign key which is a field from transaction say LIKP_KUNAG for a delivery output.This coding takes place in a user exit. The correct user exit has to be found. Once this is done, the new field is ready for input and it will be available in the list of allowed fields in the field catalogue.
4.Now you can create a condition table using the new field and use it as one of the accesses in access seq.
Please assign reward points if this info is helpful to you.

Problem in filling field catalog as table is dynamic

Hi All,
 I have to populate the data using the below function module and i am passing dynamic internal table <f_list> in place of list.
 i have to populate the field catalog fc_hier which is getting field by standard program but i have to add additional fields which are coming from dynamic internal table .
fc_hier-fieldname = l_fld_name.
fc_hier-tabname = <f_list>.
fc_hier-seltext_s = wa_char-name_char.
append fc_hier . >>>> but it is not allowing this fc_hier-tabname = <f_list> statement..*
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
 EXPORTING
 i_interface_check = g_interface_check "n777869
 i_callback_program = alv_repid
 i_callback_pf_status_set = 'SET_STATUS'
 i_callback_user_command = 'USER_COMMAND'
 is_layout = alv_layout
 is_print = alv_pri
 it_fieldcat = fc_hier[]
 i_default = 'X'
 i_save = 'A'
 is_variant = alv_variant
 it_events = gt_events[] "n777869
 i_tabname_header = 'HEADER'
 i_tabname_item = 'LIST'
 is_keyinfo = alv_keyinfo
 TABLES
 t_outtab_header = header[]
 t_outtab_item = <f_list>
 t_outtab_item = list[]
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
How can i assign table name to fc_hier-tabname as it is not taking <f_list> as input.
Thanks in advance......
Ankur

>
ankur garg wrote:
> fc_hier-fieldname = l_fld_name.
> fc_hier-tabname = <f_list>.
> fc_hier-seltext_s = wa_char-name_char.
> append fc_hier . >>>> but it is not allowing this fc_hier-tabname = <f_list> statement..*
>
> How can i assign table name to fc_hier-tabname as it is not taking <f_list> as input.
TABNAME is the name of the table & not the body of the table (TYPE slis_tabname CHAR30). You have to pass the name of the table & not the table contents !!
Something like this :
fc_hier-fieldname = l_fld_name.
fc_hier-tabname = '<F_LIST>'.
fc_hier-seltext_s = wa_char-name_char.
append fc_hier.
Anyways personally if i have dynamic tables to be used in ALV i prefer SALV which doesn't need a fieldcat
BR,
Suhas

Problem with field catalog after upgrade from 4.0

Hi experts,
We have recently upgraded from CRM 4.0 to 5.2.
I am now experiencing a problem with generation of a transport request for field catalog in transaction CTFC_CRM. I can generate the field catalog without errors.
The problem is that when I want to create the transport request in our dev system a pop up appears saying "Create object directory entry". Here I have to enter a package for some of the fields in the field catalog. The special thing is that the fields are not custom fields but rather SAP standard fields (using standard data elements). For example field BZIRK.
These are SAP standard fields but they are not standard in the field catalog. In 4.0 I did not get this prompt but this has apparently changed from 5.0.
What do I do? I guess if I need to create the objects I will need to use an SAP standard package. But how do I know what package to use?
Any comments or suggestions will be highly appreciated.
Best regards,
Anders

Hi,
If you did just install database, then you use Embed PL/SQL Gateway.
See this guide
Upgrading Oracle Application Express in Oracle Database Express Edition
I think you have not run step 5 script apxldimg.sql
Regards,
Jari

Problem filling Arch infostructure for COPA2_S001 - field catalog?

Similar Messages

Maybe you are looking for