Problem in ALV BLOCK Display
HI,
PLZ help me .
By using this code I select data from TXT file and insert data in CS13 transaction then I want to show each material which present in TXT file as ALV BLOCK DISPLAY.
Suppose txt file contain four material so report will show 4 list block .means data of every material showing in different blocks in the report.
Code which I am using showing data for last item from txt file in one block and other items showing when I click back button .
i am using below codes..........
*& Report ZCS13 *
REPORT zcs13 .
TABLES:
mara,
stpo,
t001w,
stko.
TYPE-POOLS: slis.
DATA: BEGIN OF it_stb OCCURS 0.
INCLUDE STRUCTURE zstpox.
DATA:END OF it_stb.
DATA: BEGIN OF it_matmaster OCCURS 0,
matnr TYPE matnr,
werks TYPE werks,
stlal type stlal,
capid type capid,
emeng TYPE emeng,
END OF it_matmaster.
DATA : ievent TYPE slis_t_event.
DATA: it_stb2 LIKE stpox OCCURS 0 WITH HEADER LINE,
it_stb3 LIKE stpox OCCURS 0 WITH HEADER LINE,
temp_cat TYPE slis_fieldcat_alv,
sline TYPE slis_listheader,
gt_list_top_of_page TYPE slis_t_listheader,
gs_layout TYPE slis_layout_alv ,
gt_events TYPE slis_t_event,
gt_sort TYPE slis_t_sortinfo_alv,
w_msg(255) TYPE c,
int TYPE i VALUE 0.
Declaration of parameters
*SELECTION-SCREEN BEGIN OF BLOCK b2.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_matnr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_werks.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_werks LIKE t001w-werks OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_albom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_albom LIKE stko-stlal DEFAULT ' '.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_bomap.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_bomap(4) DEFAULT 'PP01'.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b2.
*DATA :anr_datuv LIKE aenr-datuv.
*SELECTION-SCREEN BEGIN OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s03 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s01 .
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_vfrom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_vfrom LIKE stpo-datuv DEFAULT sy-datum.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD pm_aennr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS pm_aennr LIKE aenr-aennr.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (17) FOR FIELD p_reqty.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_reqty LIKE stpo-menge DEFAULT '1' .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_assd.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_assd AS CHECKBOX.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS:p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1 .
CONSTANTS c_x VALUE 'X'.
DATA: w_topmat LIKE cstmat,
fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA:v_file TYPE string.
*SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_matmaster
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_matmaster.
PERFORM explode_assembly.
PERFORM f01_set_layo CHANGING gs_layout.
PERFORM eventtab_build USING ievent.
perform fldcat.
PERFORM display_grid.
ENDLOOP.
PERFORM display_grid.
*& Form EXPLODE_ASSEMBLY
text
FORM explode_assembly.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'BEST'
cuols = c_x
datuv = sy-datum
emeng = it_matmaster-emeng
knfba = c_x
ksbvo = c_x
mehrs = c_x
mbwls = c_x
mdmps = c_x
mktls = c_x
stlal = it_matmaster-stlal
stlan = p_bomap
mtnrv = it_matmaster-matnr
werks = it_matmaster-werks
svwvo = 'X'
vrsvo = 'X'
IMPORTING
topmat = w_topmat
TABLES
stb = it_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
INTO w_msg.
WRITE: / w_msg.
EXIT.
ENDIF.
ENDFORM. "explode_assembly
*& Form display_grid
text
--> p1 text
<-- p2 text
form display_grid .
*CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZCS13'
i_callback_top_of_page = 'TOP_OF_PAGE_GRID'
is_layout = gs_layout
it_fieldcat = fieldcat
IT_SORT = GT_SORT[]
i_save = 'A'
it_events = gt_events[]
TABLES
t_outtab = it_stb
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'ZALVTOTAL'
I_CALLBACK_PF_STATUS_SET = PFSTATUS
i_callback_user_command = 'USER_COMMAND'(001)
IT_EXCLUDING =
*CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = i_fieldcat
i_tabname = 'IT_TAB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_tab[]
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
*IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
*ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = fieldcat
i_tabname = 'IT_STB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_stb[]
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
i_interface_check = 'x_print_layout'
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform. " display_grid
*& Form fldcat
text
--> p1 text
<-- p2 text
form fldcat .
*DATA: wa_fieldcat TYPE slis_fieldcat_alv,
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZCS13'
I_INTERNAL_TABNAME = 'IT_STB'
i_structure_name = 'ZSTPOX'
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = 'ZCS13'
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " fldcat
Hi ,
plz check the below codeand suggest me why it not showing data.....
i make changes according to you ...
waiting for your reply
*& Report ZCS13 *
REPORT zcs13 .
TABLES:
mara,
stpo,
t001w,
stko.
TYPE-POOLS: slis.
DATA: BEGIN OF it_stb OCCURS 0.
INCLUDE STRUCTURE zstpox.
DATA:END OF it_stb.
DATA: BEGIN OF it_matmaster OCCURS 0,
matnr TYPE matnr,
werks TYPE werks,
stlal type stlal,
capid type capid,
emeng TYPE emeng,
END OF it_matmaster.
DATA : ievent TYPE slis_t_event.
DATA: it_stb2 LIKE stpox OCCURS 0 WITH HEADER LINE,
it_stb3 LIKE stpox OCCURS 0 WITH HEADER LINE,
temp_cat TYPE slis_fieldcat_alv,
sline TYPE slis_listheader,
gt_list_top_of_page TYPE slis_t_listheader,
gs_layout TYPE slis_layout_alv ,
gt_events TYPE slis_t_event,
gt_sort TYPE slis_t_sortinfo_alv,
w_msg(255) TYPE c,
int TYPE i VALUE 0.
Declaration of parameters
*SELECTION-SCREEN BEGIN OF BLOCK b2.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_matnr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_werks.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_werks LIKE t001w-werks OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_albom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_albom LIKE stko-stlal DEFAULT ' '.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_bomap.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_bomap(4) DEFAULT 'PP01'.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b2.
*DATA :anr_datuv LIKE aenr-datuv.
*SELECTION-SCREEN BEGIN OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s03 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s01 .
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_vfrom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_vfrom LIKE stpo-datuv DEFAULT sy-datum.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD pm_aennr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS pm_aennr LIKE aenr-aennr.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (17) FOR FIELD p_reqty.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_reqty LIKE stpo-menge DEFAULT '1' .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_assd.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_assd AS CHECKBOX.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS:p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1 .
CONSTANTS c_x VALUE 'X'.
DATA: w_topmat LIKE cstmat,
fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA:v_file TYPE string.
*SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_matmaster
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'ZCS13'
I_CALLBACK_PF_STATUS_SET = PFSTATUS
i_callback_user_command = 'USER_COMMAND'(001).
IT_EXCLUDING =.
DATA :int1(10) .
PERFORM fldcat.
LOOP AT it_matmaster.
PERFORM explode_assembly.
PERFORM f01_set_layo CHANGING gs_layout.
PERFORM eventtab_build USING ievent.
PERFORM fldcat.
PERFORM display_grid.
ENDLOOP.
PERFORM display_grid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
i_interface_check = 'x_print_layout'
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form EXPLODE_ASSEMBLY
text
FORM explode_assembly.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'BEST'
cuols = c_x
datuv = sy-datum
emeng = it_matmaster-emeng
knfba = c_x
ksbvo = c_x
mehrs = c_x
mbwls = c_x
mdmps = c_x
mktls = c_x
stlal = it_matmaster-stlal
stlan = p_bomap
mtnrv = it_matmaster-matnr
werks = it_matmaster-werks
svwvo = 'X'
vrsvo = 'X'
IMPORTING
topmat = w_topmat
TABLES
stb = it_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
INTO w_msg.
WRITE: / w_msg.
EXIT.
ENDIF.
ENDFORM. "explode_assembly
*& Form display_grid
text
--> p1 text
<-- p2 text
FORM display_grid .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = fieldcat
i_tabname = 'IT_STB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_stb
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_grid
*& Form fldcat
text
--> p1 text
<-- p2 text
FORM fldcat .
*DATA: wa_fieldcat TYPE slis_fieldcat_alv,
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZCS13'
I_INTERNAL_TABNAME = 'IT_STB'
i_structure_name = 'ZSTPOX'
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = 'ZCS13'
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " fldcat
Similar Messages
-
Pdf output problem in ALV Block Display
Hi ,
I have z custom report of ALV BLOCK LIST DISPLAY which creates Spool using ABAP submit statement and then this spool is feed to FM CONVERT_ABAPSPOOLJOB_2_PDF to create PDF file . PDF file generates but output is coming on two pages. I want to display output on same page(i.e. on first page only) .
it's urgent, appriciate your help.
Thanks & Regards
MSIwhile displaying in the screen is it display in one screen and while converting in PDF is IT Does the same in Two Pages
-
Hi All,
I am trying to displaying BOM explosion for materials in ALV Block list.
I am taking the materials to be exploded from a local file. Taking the contents of the file in an internal table and then passing the parameters like material number bom application , alternative BOM to the function 'CS_BOM_EXPL_MAT_V2'
Then I am calling the functions for ALV Block display for each material.
But when I am displaying the data in the block display , only the BOM explosion for the last material is getting displayed.
I am pasting the code also for ur reference.
REPORT zcs13 .
TABLES:
mara,
stpo,
t001w,
stko.
TYPE-POOLS: slis.
DATA: BEGIN OF it_stb OCCURS 0.
INCLUDE STRUCTURE zstpox.
DATA:END OF it_stb.
DATA: BEGIN OF it_matmaster OCCURS 0,
matnr TYPE matnr,
werks TYPE werks,
stlal type stlal,
capid type capid,
emeng TYPE emeng,
END OF it_matmaster.
DATA : ievent TYPE slis_t_event.
DATA: it_stb2 LIKE stpox OCCURS 0 WITH HEADER LINE,
it_stb3 LIKE stpox OCCURS 0 WITH HEADER LINE,
temp_cat TYPE slis_fieldcat_alv,
sline TYPE slis_listheader,
gt_list_top_of_page TYPE slis_t_listheader,
gs_layout TYPE slis_layout_alv ,
gt_events TYPE slis_t_event,
gt_sort TYPE slis_t_sortinfo_alv,
w_msg(255) TYPE c,
int TYPE i VALUE 0.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS:p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1 .
CONSTANTS c_x VALUE 'X'.
DATA: w_topmat LIKE cstmat,
fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA:v_file TYPE string.
*SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_matmaster
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_matmaster.
PERFORM explode_assembly.
PERFORM f01_set_layo CHANGING gs_layout.
PERFORM eventtab_build USING ievent.
perform fldcat.
PERFORM display_grid.
ENDLOOP.
PERFORM display_grid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
i_interface_check = 'x_print_layout'
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form EXPLODE_ASSEMBLY
text
FORM explode_assembly.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'BEST'
cuols = c_x
datuv = sy-datum
emeng = it_matmaster-emeng
knfba = c_x
ksbvo = c_x
mehrs = c_x
mbwls = c_x
mdmps = c_x
mktls = c_x
stlal = it_matmaster-stlal
stlan = p_bomap
mtnrv = it_matmaster-matnr
werks = it_matmaster-werks
svwvo = 'X'
vrsvo = 'X'
IMPORTING
topmat = w_topmat
TABLES
stb = it_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
INTO w_msg.
WRITE: / w_msg.
EXIT.
ENDIF.
ENDFORM. "explode_assembly
*& Form display_grid
text
--> p1 text
<-- p2 text
form display_grid .
*CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZCS13'
i_callback_top_of_page = 'TOP_OF_PAGE_GRID'
is_layout = gs_layout
it_fieldcat = fieldcat
IT_SORT = GT_SORT[]
i_save = 'A'
it_events = gt_events[]
TABLES
t_outtab = it_stb
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'ZALVTOTAL'
I_CALLBACK_PF_STATUS_SET = PFSTATUS
i_callback_user_command = 'USER_COMMAND'(001)
IT_EXCLUDING =
*CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = i_fieldcat
i_tabname = 'IT_TAB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_tab[]
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
*IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
*ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = fieldcat
i_tabname = 'IT_STB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_stb[]
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
clear it_stb[].
endform. " display_grid
*& Form fldcat
text
--> p1 text
<-- p2 text
form fldcat .
*DATA: wa_fieldcat TYPE slis_fieldcat_alv,
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZCS13'
I_INTERNAL_TABNAME = 'IT_STB'
i_structure_name = 'ZSTPOX'
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = 'ZCS13'
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Pls Suggest
Thanks.Hi All,
I am trying to displaying BOM explosion for materials in ALV Block list.
I am taking the materials to be exploded from a local file. Taking the contents of the file in an internal table and then passing the parameters like material number bom application , alternative BOM to the function 'CS_BOM_EXPL_MAT_V2'
Then I am calling the functions for ALV Block display for each material.
But when I am displaying the data in the block display , only the BOM explosion for the last material is getting displayed.
I am pasting the code also for ur reference.
REPORT zcs13 .
TABLES:
mara,
stpo,
t001w,
stko.
TYPE-POOLS: slis.
DATA: BEGIN OF it_stb OCCURS 0.
INCLUDE STRUCTURE zstpox.
DATA:END OF it_stb.
DATA: BEGIN OF it_matmaster OCCURS 0,
matnr TYPE matnr,
werks TYPE werks,
stlal type stlal,
capid type capid,
emeng TYPE emeng,
END OF it_matmaster.
DATA : ievent TYPE slis_t_event.
DATA: it_stb2 LIKE stpox OCCURS 0 WITH HEADER LINE,
it_stb3 LIKE stpox OCCURS 0 WITH HEADER LINE,
temp_cat TYPE slis_fieldcat_alv,
sline TYPE slis_listheader,
gt_list_top_of_page TYPE slis_t_listheader,
gs_layout TYPE slis_layout_alv ,
gt_events TYPE slis_t_event,
gt_sort TYPE slis_t_sortinfo_alv,
w_msg(255) TYPE c,
int TYPE i VALUE 0.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS:p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1 .
CONSTANTS c_x VALUE 'X'.
DATA: w_topmat LIKE cstmat,
fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA:v_file TYPE string.
*SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_matmaster
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_matmaster.
PERFORM explode_assembly.
PERFORM f01_set_layo CHANGING gs_layout.
PERFORM eventtab_build USING ievent.
perform fldcat.
PERFORM display_grid.
ENDLOOP.
PERFORM display_grid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
i_interface_check = 'x_print_layout'
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form EXPLODE_ASSEMBLY
text
FORM explode_assembly.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'BEST'
cuols = c_x
datuv = sy-datum
emeng = it_matmaster-emeng
knfba = c_x
ksbvo = c_x
mehrs = c_x
mbwls = c_x
mdmps = c_x
mktls = c_x
stlal = it_matmaster-stlal
stlan = p_bomap
mtnrv = it_matmaster-matnr
werks = it_matmaster-werks
svwvo = 'X'
vrsvo = 'X'
IMPORTING
topmat = w_topmat
TABLES
stb = it_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
INTO w_msg.
WRITE: / w_msg.
EXIT.
ENDIF.
ENDFORM. "explode_assembly
*& Form display_grid
text
--> p1 text
<-- p2 text
form display_grid .
*CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZCS13'
i_callback_top_of_page = 'TOP_OF_PAGE_GRID'
is_layout = gs_layout
it_fieldcat = fieldcat
IT_SORT = GT_SORT[]
i_save = 'A'
it_events = gt_events[]
TABLES
t_outtab = it_stb
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'ZALVTOTAL'
I_CALLBACK_PF_STATUS_SET = PFSTATUS
i_callback_user_command = 'USER_COMMAND'(001)
IT_EXCLUDING =
*CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = i_fieldcat
i_tabname = 'IT_TAB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_tab[]
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
*IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
*ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = fieldcat
i_tabname = 'IT_STB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_stb[]
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
clear it_stb[].
endform. " display_grid
*& Form fldcat
text
--> p1 text
<-- p2 text
form fldcat .
*DATA: wa_fieldcat TYPE slis_fieldcat_alv,
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZCS13'
I_INTERNAL_TABNAME = 'IT_STB'
i_structure_name = 'ZSTPOX'
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = 'ZCS13'
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Pls Suggest
Thanks. -
Hi,
Could anyone tell me if it is possible to edit fields in ALV block display?
Thanks in advance
RadhikaJust check it out in the function pool SLIS the following.
TYPES: BEGIN OF SLIS_FIELDCAT_ALV_SPEC,
KEY_SEL(1) TYPE C, " field not obligatory
NO_SUM(1) TYPE C, " do not sum up
SP_GROUP(4) TYPE C, " group specification
REPREP(1) TYPE C, " selection for rep/rep
*INPUT(1) TYPE C, " input*
EDIT(1) TYPE C, " internal use only
HOTSPOT(1) TYPE C, " hotspot
END OF SLIS_FIELDCAT_ALV_SPEC.
TYPES: BEGIN OF SLIS_FIELDCAT_ALV.
INCLUDE TYPE SLIS_FIELDCAT_MAIN.
INCLUDE TYPE SLIS_FIELDCAT_ALV_SPEC.
TYPES: END OF SLIS_FIELDCAT_ALV.
Regards,
Sankar. -
How to display print icon in alv block display
hi all,
in my alv block display i have to display some icons as print, print preview, find, sort,change layout e.t.c
if any one knows do let me know, if possible send the code.
i have searched the forum for this query but i could'nt get the answer.Hi,
check the link.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/how%252bto%252bkeep%252ban%252beye%252bon%252baggregates%252bin%252byour%252bsystem
Regards
Rajesh Kumar -
Problem with ALV Grid Display screen Back Button
Dear Friends ,
I have an ALV Grid Display,Here am facing a problem for my 'Back' button,i haven't defined any PF Status and is using the standard one.But after the Display when i press Back Button a blank Screen is appearing n then again i have to press back button to go to my Selection Screen.
Please Suggest if i have to take care of something else.
I want my Selection Screen when i press Back on my Display Screen.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
Thanks and Regards,
AshwiniHi Vijay ,
No i dont have any write statement in my proggram.
Here it is
REPORT ZRMMPD01A NO STANDARD PAGE HEADING.
TABLES : EQUI,SER03,MKPF,OBJK.
TYPE-POOLS : SLIS.
DATA IT_EQUI LIKE EQUI OCCURS 0 WITH HEADER LINE.
DATA IT_OBJK LIKE OBJK OCCURS 0 WITH HEADER LINE..
DATA IT_SER03 LIKE SER03 OCCURS 0 WITH HEADER LINE.
DATA IT_MKPF LIKE MKPF OCCURS 0 WITH HEADER LINE .
DATA : BEGIN OF IT_DISPLAY OCCURS 0,
MATNR LIKE EQUI-MATNR,
SERNR LIKE EQUI-SERNR,
BWART LIKE SER03-BWART,
WERK LIKE SER03-WERK,
CHARGE LIKE SER03-CHARGE,
LAGERORT LIKE SER03-LAGERORT,
MBLNR LIKE SER03-MBLNR,
MJAHR LIKE SER03-MJAHR,
ZEILE LIKE SER03-ZEILE,
BUDAT LIKE MKPF-BUDAT,
BKTXT LIKE MKPF-BKTXT,
USNAM LIKE MKPF-USNAM,
XBLNR LIKE MKPF-XBLNR,
END OF IT_DISPLAY.
DATA : WA_DISPLAY LIKE IT_DISPLAY.
DATA IT_FINAL LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA IT_TEMP LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA :I_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_EVENTS TYPE SLIS_T_EVENT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_MATNR FOR EQUI-MATNR MATCHCODE OBJECT MCD,"OBLIGATORY
S_SERNR FOR EQUI-SERNR, "MATCHCODE OBJECT MCD OBLIGATORY
S_MBLNR FOR SER03-MBLNR MATCHCODE OBJECT MCD,
S_BWART FOR SER03-BWART MATCHCODE OBJECT MCD,
S_WERK FOR SER03-WERK MATCHCODE OBJECT MCD,
S_LAGET FOR SER03-LAGERORT MATCHCODE OBJECT MCD,
S_BUDAT FOR MKPF-BUDAT MATCHCODE OBJECT MCD,
S_XBLNR FOR MKPF-XBLNR MATCHCODE OBJECT MCD.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X',
R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
START-OF-SELECTION.
*Fetch Data.
PERFORM GET_DATA.
*Fill Display Fields.
PERFORM FILL_TABLE.
*Segregate data according to radio button selection.
PERFORM SELECT_CONDITION.
*Fill The Feild catalog.
PERFORM FIELD_CATALOG.
*Display Output.
PERFORM OUTPUT_DISPLAY..
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA.
SELECT * FROM EQUI INTO TABLE IT_EQUI
WHERE MATNR IN S_MATNR
AND SERNR IN S_SERNR.
SELECT * FROM OBJK INTO TABLE IT_OBJK
FOR ALL ENTRIES IN IT_EQUI
WHERE EQUNR = IT_EQUI-EQUNR.
SELECT * FROM SER03 INTO TABLE IT_SER03
FOR ALL ENTRIES IN IT_OBJK
WHERE OBKNR = IT_OBJK-OBKNR
AND MBLNR IN S_MBLNR
AND BWART IN S_BWART
AND WERK IN S_WERK
AND LAGERORT IN S_LAGET.
SELECT * FROM MKPF INTO TABLE IT_MKPF
FOR ALL ENTRIES IN IT_SER03
WHERE MBLNR = IT_SER03-MBLNR
AND BUDAT IN S_BUDAT
AND XBLNR IN S_XBLNR.
ENDFORM. " GET_DATA
*& Form FILL_TABLE
text
--> p1 text
<-- p2 text
FORM FILL_TABLE.
LOOP AT IT_EQUI.
LOOP AT IT_OBJK.
IF IT_OBJK-EQUNR <> IT_EQUI-EQUNR.
SKIP.
ELSE.
READ TABLE IT_SER03 WITH KEY OBKNR = IT_OBJK-OBKNR.
IF SY-SUBRC = 0.
WA_DISPLAY-MATNR = IT_EQUI-MATNR.
WA_DISPLAY-SERNR = IT_EQUI-SERNR.
WA_DISPLAY-BWART = IT_SER03-BWART.
WA_DISPLAY-WERK = IT_SER03-WERK.
WA_DISPLAY-CHARGE = IT_SER03-CHARGE.
WA_DISPLAY-LAGERORT = IT_SER03-LAGERORT.
WA_DISPLAY-MBLNR = IT_SER03-MBLNR.
WA_DISPLAY-MJAHR = IT_SER03-MJAHR.
WA_DISPLAY-ZEILE = IT_SER03-ZEILE.
READ TABLE IT_MKPF WITH KEY MBLNR = IT_SER03-MBLNR.
IF SY-SUBRC = 0.
WA_DISPLAY-BUDAT = IT_MKPF-BUDAT.
WA_DISPLAY-BKTXT = IT_MKPF-BKTXT.
WA_DISPLAY-USNAM = IT_MKPF-USNAM.
WA_DISPLAY-XBLNR = IT_MKPF-XBLNR.
ENDIF.
ENDIF.
ENDIF.
IF NOT WA_DISPLAY IS INITIAL.
APPEND WA_DISPLAY TO IT_DISPLAY.
CLEAR WA_DISPLAY.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDFORM. " FILL_TABLE
*& Form FIELD_CATALOG
text
--> p1 text
<-- p2 text
FORM FIELD_CATALOG.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MATNR'.
FIELDCAT-SELTEXT_M = 'Material Number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'SERNR'.
FIELDCAT-SELTEXT_M = 'Serial number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MBLNR'.
FIELDCAT-SELTEXT_L = 'Number of material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BWART'.
FIELDCAT-SELTEXT_M = 'Movement type'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'WERK'.
FIELDCAT-SELTEXT_M = 'Plant'.
FIELDCAT-OUTPUTLEN = 5.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'CHARGE'.
FIELDCAT-SELTEXT_M = 'Batch number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'LAGERORT'.
FIELDCAT-SELTEXT_M = 'Storage Location'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MJAHR'.
FIELDCAT-SELTEXT_M = 'Material doc. year'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'ZEILE'.
FIELDCAT-SELTEXT_L = 'Item in material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BUDAT'.
FIELDCAT-SELTEXT_L = 'Posting date in the document'.
FIELDCAT-OUTPUTLEN = 10.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BKTXT'.
FIELDCAT-SELTEXT_L = 'Document header text'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'USNAM'.
FIELDCAT-SELTEXT_M = 'User name'.
FIELDCAT-OUTPUTLEN = 15.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'XBLNR'.
FIELDCAT-SELTEXT_L = 'Reference document number'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
ENDFORM. " FIELD_CATALOG
*& Form DISPLAY_OUTPUT
text
--> p1 text
<-- p2 text
FORM OUTPUT_DISPLAY.
IF R1 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_DISPLAY
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ELSEIF R2 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ENDIF.
ENDFORM. " DISPLAY_OUTPUT
*& Form SELECT_CONDITION
text
--> p1 text
<-- p2 text
FORM SELECT_CONDITION.
IF R2 = 'X'.
CLEAR WA_DISPLAY.
SORT IT_DISPLAY BY MATNR SERNR MBLNR ZEILE.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY WHERE ZEILE = '0002'.
READ TABLE IT_DISPLAY WITH KEY MATNR = IT_DISPLAY-MATNR
SERNR = IT_DISPLAY-SERNR ZEILE = '0001'.
IF SY-SUBRC = 0.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
SORT IT_DISPLAY BY MATNR SERNR BWART MBLNR.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY.
IF WA_DISPLAY IS INITIAL.
WA_DISPLAY = IT_DISPLAY.
ENDIF.
LOOP AT IT_DISPLAY WHERE MATNR = WA_DISPLAY-MATNR
AND SERNR = WA_DISPLAY-SERNR.
IF IT_DISPLAY-BUDAT > WA_DISPLAY-BUDAT.
WA_DISPLAY = IT_DISPLAY.
ELSE.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
APPEND WA_DISPLAY TO IT_TEMP.
CLEAR WA_DISPLAY.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM IT_TEMP.
IF NOT IT_TEMP[] IS INITIAL.
IT_FINAL[] = IT_TEMP[].
ENDIF.
ENDIF.
ENDFORM. " SELECT_CONDITION
Regards,
Ashwini -
i have an existing report which displays the output in blocks.
for this they have used ALV .
they have used macros to build fieldcatalog for each block.
the following is the macro for the field catalog.
DEFINE m_alv_fieldcat.
clear e_alv_fieldcat.
add c_1 to w_col_pos.
move: w_col_pos to e_alv_fieldcat-col_pos,
&1 to e_alv_fieldcat-fieldname,
&2 to e_alv_fieldcat-tabname,
&3 to e_alv_fieldcat-ref_tabname,
&4 to e_alv_fieldcat-key,
&5 to e_alv_fieldcat-do_sum,
&6 to e_alv_fieldcat-outputlen,
&7 to e_alv_fieldcat-reptext_ddic,
&8 to e_alv_fieldcat-cfieldname,
&9 to e_alv_fieldcat-datatype.
append e_alv_fieldcat to i_alv_fieldcat.
END-OF-DEFINITION.
and they have populated the macro as follows
m_alv_fieldcat:
c_usnam param_tab_hdr c_bkpf space space 0 space space space,
c_belnr param_tab_hdr c_bkpf space space 0 space space space,
c_cpudt param_tab_hdr c_bkpf space space 0 space space space,
c_budat param_tab_hdr c_bkpf space space 0 space space space,
c_blart param_tab_hdr c_bkpf space space 0 space space space,
c_xblnr param_tab_hdr c_bkpf space space 0 space space space.
now my requirement is i have to add one more column in the block display.
they have used place holders for macros.as place holders are only for 9 values.plz tell me how to add one more column to this fieldcatalog which is using Macros.
thanks ®ardsAs you need to add one more column, you will not face any problem with Place holders. Just add the last line of the below code to the existing code:
m_alv_fieldcat:
c_usnam param_tab_hdr c_bkpf space space 0 space space space,
c_belnr param_tab_hdr c_bkpf space space 0 space space space,
c_cpudt param_tab_hdr c_bkpf space space 0 space space space,
c_budat param_tab_hdr c_bkpf space space 0 space space space,
c_blart param_tab_hdr c_bkpf space space 0 space space space,
c_xblnr param_tab_hdr c_bkpf space space 0 space space space.
C_EXTRACOL param_tab_hdr c_bkpf space space 0 space space space.
This will add one more column to the existing ALV list.
Regards,
Kiran Bobbala -
Background task problem with alv grid display
Hello !
I have a problem when executing my program in background.
In foreground I have no problem, my ALV appears. In the background I have a dump.
The current ABAP program "SAPLKKBL" had to be terminated because one of the statements could not be executed.
I use the function module 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_user_command = 'F533_USER_COMMAND'
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = i_fgroup[]
i_save = 'X'
it_sort = gd_sort
i_buffer_active = ' '
i_callback_pf_status_set = 'F534_SET_PF_STATUS'
TABLES
t_outtab = mytab
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I don't understand where the problem is. Please help me.
Thank you.I love replying to old threads:
Try this link
http://scn.sap.com/people/prashant.patil12/blog/2007/02/20/displaying-alv-grid-in-background-job -
Hi,
I have developed ALV Grid Report. It is working fine.
But while i am coming from alv grid display to program
by pressing BACK button it is showing one more screen
which is empty. Again I press back button it is coming to
selection screen. I don't want that empty screen.What is
the problem. Can u help me in this regard.?
Thanks
Narasimhahi
under the usercommand of back button use Exit Statement
like
At user-comand
IF sy-ucom = 'Back'
EXIT
ENdif.
Cheers
Snehi -
Hi All,
I want to display Blocked ALV.
i know the function modules
REUSE_ALV_BLOCK_LIST_INIT
REUSE_ALV_BLOCK_LIST_APPEND
REUSE_ALV_BLOCK_LIST_DISPLAY
I want to display it with óut using this function modules.
Is there anyway to do that.
If so please let me know.
Thankshi
just have a look at this thread
Re: ALV Block list Display
hope it helps
regards
Aakash Banga -
ALV Block Display with filet ............ Urget Please..............
Hello All,
Hello All,
I am Working on ALV Block List Report. In that report i am having two Blocks.
if i set a filter for one block it is filtering that block, the second block remains constant.
My requirment is like this if iam setting a filter for one field in first block, if the second block also have the same field, then filter should Automatically be setted to the second block based on the field.
Is this possible????? Can any one Help me out form this issue.
Thanks,
Feroz.If you are using ALV standard functionality then if you are sorting with field then it will consider only that field. but if the data for other field also same then it will sort based on first field only but it will look like it is consider second field also.
If you are using standard functionality then you can not impletement logic that first field get selected and sorted by second even if its values are same.
Rewards if useful..................
Minal -
Problem while alv grid display exporting to excel sheet
Hi,
I have done an ALV report using reuse_alv_grid _display , out put is fine , but when i click on excel view icon i could only see an excel sheet without any data ., but when i use export to local file and choose spread sheet its giving the data in excel, but the user wants to click only the excel view icon.
Best RegardsHi,
Check this link
[Problem with Excel button in ALV Grid...URGENT;
Regards,
Sathish Reddy. -
Problem in alv grid display (it is not filtering the data in print preview)
Hi Every One,
Its very urgent for me to deliver this report ....
I applied sort criteria on my final internal table which is pupulated and then i passed to the function module...
when i execute the program it is showing me the perfect output..when i take a print preview it is not filtering the data instead it is showing me the normal uotput i.e..,without sort criteria...
here is the code plz go thru it and tell me were i am doing wrong...
i thank u one and all ...and plz debub the code on the system and let me know....
REPORT tracking-quotation NO STANDARD PAGE HEADING MESSAGE-ID zrv_message LINE-COUNT 65 LINE-SIZE 110.
Includes
This include contains declarations
INCLUDE ZMM_TRACKING_QUOTATION_T.
This include contains code for the performs
INCLUDE ZMM_TRACKING_QUOTATION_F.
AT SELECTION SCREEN *
AT SELECTION-SCREEN.
This perform will validate the fields
PERFORM f_validate_sel_screen.
Start-Of-Selection
START-OF-SELECTION.
This perform will read the values from the database.
PERFORM selection.
This perform will build the field catalogue
PERFORM f_build_catalogue.
This perform will build the sort
PERFORM f_event_sort.
This perform will build the layout
PERFORM f_build_layout.
This perform will build the event
PERFORM f_event_build.
This perform will build the comment
PERFORM f_comment_build.
This perform will display the list
PERFORM f_list_display.
End-Of-Selection
END-OF-SELECTION.
*& Include ZMM_TRACKING_QUOTATION_T *
T a b l e s D e c l a r a t i o n s *
TABLES: eban,
ebkn,
ekko,
eket,
lfa1,
ekpo.
Selection Screen Declaration
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-100.
SELECT-OPTIONS: bednr FOR eban-bednr,
ps_psp FOR ebkn-ps_psp_pnr,
kostl FOR ebkn-kostl,
erdat FOR ebkn-erdat.
SELECTION-SCREEN END OF BLOCK b1.
Type Pools D e c l a r a t i o n s *
TYPE-POOLS: slis.
V a r i a b l e s *
DATA : rt_fieldcat TYPE slis_t_fieldcat_alv,
i_layout TYPE slis_layout_alv,
i_event TYPE slis_t_event,
i_listheader TYPE slis_t_listheader,
l_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv.
I n t e r n a l T a b l e s *
DATA: BEGIN OF i_final_tab OCCURS 0,
name1 LIKE lfa1-name1,
banfn LIKE eban-banfn,
badat LIKE eban-badat,
bnfpo LIKE eban-bnfpo,
txz01 LIKE eban-txz01,
menge LIKE eban-menge,
bednr LIKE eban-bednr,
frgdt LIKE eban-frgdt,
lfdat LIKE eban-lfdat,
ps_psp_pnr LIKE ebkn-ps_psp_pnr,
bwbdt LIKE ekko-bwbdt,
aedat LIKE ekko-aedat,
lifnr LIKE ekko-lifnr,
ihran LIKE ekko-ihran,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
plifz LIKE ekpo-plifz,
eindt LIKE eket-eindt,
END OF i_final_tab.
DATA: BEGIN OF itab OCCURS 0,
name1 LIKE lfa1-name1,
banfn LIKE eban-banfn,
badat LIKE eban-badat,
bnfpo LIKE eban-bnfpo,
txz01 LIKE eban-txz01,
menge(17),
bednr LIKE eban-bednr,
frgdt LIKE eban-frgdt,
lfdat LIKE eban-lfdat,
ps_psp_pnr LIKE ebkn-ps_psp_pnr,
bwbdt LIKE ekko-bwbdt,
aedat LIKE ekko-aedat,
lifnr LIKE ekko-lifnr,
ihran LIKE ekko-ihran,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
plifz LIKE ekpo-plifz,
eindt LIKE eket-eindt,
END OF itab.
*& Include ZMM_TRACKING_QUOTATION_F *
**& Form FIELDCAT_INIT
text
-->P_GT_FIELDCAT[] text
FORM f_build_catalogue.
DATA : ls_fieldcat TYPE slis_fieldcat_alv.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'BANFN'.
ls_fieldcat-tabname = 'itab'.
ls_fieldcat-seltext_m = 'PR Number'.
ls_fieldcat-ref_tabname = 'EBAN'.
ls_fieldcat-fix_column = ''.
ls_fieldcat-emphasize = ''.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'BNFPO'.
ls_fieldcat-ref_tabname = 'EBAN'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'BADAT'.
ls_fieldcat-ref_tabname = 'EBAN'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'TXZ01'.
ls_fieldcat-ref_tabname = 'EBAN'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'MENGE'.
ls_fieldcat-ref_tabname = 'ITAB'.
ls_fieldcat-seltext_l = 'Quantity'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'PS_PSP_PNR'.
ls_fieldcat-ref_tabname = 'EBKN'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'BEDNR'.
ls_fieldcat-ref_tabname = 'EBAN'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'FRGDT'.
ls_fieldcat-ref_tabname = 'EBAN'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'LFDAT'.
ls_fieldcat-ref_tabname = 'EBAN'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'EBELN'.
ls_fieldcat-ref_tabname = 'EKPO'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'EBELP'.
ls_fieldcat-ref_tabname = 'EKPO'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'AEDAT'.
ls_fieldcat-ref_tabname = 'EKKO'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'LIFNR'.
ls_fieldcat-ref_tabname = 'EKKO'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'NAME1'.
ls_fieldcat-ref_tabname = 'LFA1'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'IHRAN'.
ls_fieldcat-ref_tabname = 'EKKO'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'EINDT'.
ls_fieldcat-ref_tabname = 'EKET'.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'PLIFZ'.
ls_fieldcat-ref_tabname = 'EKPO'.
APPEND ls_fieldcat TO rt_fieldcat.
ENDFORM. " FIELDCAT_INIT
*& Form selection
text
--> p1 text
<-- p2 text
FORM selection .
SELECT
lfa1~name1
eban~banfn
eban~badat
eban~bnfpo
eban~txz01
eban~menge
eban~bednr
eban~frgdt
eban~lfdat
ebkn~ps_psp_pnr
ekko~bwbdt
ekko~aedat
ekko~lifnr
ekko~ihran
ekpo~ebeln
ekpo~ebelp
ekpo~plifz
eket~eindt
FROM lfa1 INNER JOIN ekko ON ( lfa1lifnr = ekkolifnr )
INNER JOIN ekpo ON ( ekkoebeln = ekpoebeln )
INNER JOIN eket ON ( ekpoebeln = eketebeln
AND
ekpoebelp = eketebelp )
INNER JOIN eban ON ( ebanbanfn = eketbanfn
AND
ebanbnfpo = eketbnfpo )
INNER JOIN ebkn ON ( ebanbanfn = ebknbanfn
AND
ebanbnfpo = ebknbnfpo )
INTO TABLE i_final_tab WHERE eban~bednr IN bednr AND
ebkn~ps_psp_pnr IN ps_psp AND
ebkn~kostl IN kostl AND
ebkn~erdat IN erdat AND
ekko~bstyp <> 'F'.
LOOP AT i_final_tab.
itab-name1 = i_final_tab-name1.
itab-banfn = i_final_tab-banfn.
itab-badat = i_final_tab-badat.
itab-bnfpo = i_final_tab-bnfpo.
itab-txz01 = i_final_tab-txz01.
itab-menge = i_final_tab-menge.
itab-bednr = i_final_tab-bednr.
itab-frgdt = i_final_tab-frgdt.
itab-lfdat = i_final_tab-lfdat.
itab-ps_psp_pnr = i_final_tab-ps_psp_pnr.
itab-aedat = i_final_tab-aedat.
itab-lifnr = i_final_tab-lifnr.
itab-ihran = i_final_tab-ihran.
itab-ebeln = i_final_tab-ebeln.
itab-ebelp = i_final_tab-ebelp.
itab-plifz = i_final_tab-plifz.
itab-eindt = i_final_tab-eindt.
APPEND itab.
CLEAR itab.
ENDLOOP.
ENDFORM. " selection
*& Form f_event_build
text
--> p1 text
<-- p2 text
FORM f_event_build .
DATA wa_event TYPE slis_alv_event.
CLEAR: wa_event,
i_event.
*read event top-of-page
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = i_event.
IF sy-subrc <> 0.
ENDIF.
*Prepare event table
READ TABLE i_event WITH KEY name = 'TOP_OF_PAGE' INTO wa_event.
IF sy-subrc EQ 0.
MOVE 'TOP_OF_PAGE' TO wa_event-form.
APPEND wa_event TO i_event.
ENDIF.
ENDFORM. " f_event_build
*& Form f_comment_build
text
--> p1 text
<-- p2 text
FORM f_comment_build .
DATA: wa_listheader TYPE slis_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'H'.
wa_listheader-info = 'Tracking Of Quotation For Purchase Requisition'.
APPEND wa_listheader TO i_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-info = 'SMS-DEMAG Pvt. Ltd.'.
APPEND wa_listheader TO i_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-info = 'R1- Nehru Enclave'.
APPEND wa_listheader TO i_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-info = 'New Delhi - '.
APPEND wa_listheader TO i_listheader.
ENDFORM. " f_comment_build
*& Form f_build_layout
text
--> p1 text
<-- p2 text
FORM f_build_layout .
CLEAR i_layout.
i_layout-colwidth_optimize = 'X'.
i_layout-zebra = 'X'.
i_layout-totals_text = 'Total'.
ENDFORM. " f_build_layout
*& Form f_list_display
text
--> p1 text
<-- p2 text
FORM f_list_display .
*sort itab by name1
banfn
badat
bnfpo
txz01
menge
bednr
frgdt
lfdat
ps_psp_pnr
bwbdt
aedat
lifnr
ihran
ebeln
ebelp
plifz
eindt.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
is_layout = i_layout
it_fieldcat = rt_fieldcat
it_events = i_event
it_sort = l_sort
TABLES
t_outtab = itab.
IF sy-subrc <> 0.
ENDIF.
ENDFORM. " f_list_display
*& Form TOP_OF_PAGE
text
--> p1 text
<-- p2 text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_listheader
i_logo = 'ENJOYSAP_LOGO'.
ENDFORM. "TOP_OF_PAGE
*& Form f_event_sort
text
--> p1 text
<-- p2 text
FORM f_event_sort .
wa_sort-spos = 1.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-fieldname = 'BANFN'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
CLEAR WA_SORT.
wa_sort-spos = 5.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-fieldname = 'MENGE'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 2.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-fieldname = 'BNFPO'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 3.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-fieldname = 'BADAT'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 4.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-fieldname = 'TXZ01'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 7.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-fieldname = 'BEDNR'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 6.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-fieldname = 'PS_PSP_PNR'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 8.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-fieldname = 'FRGDT'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 9.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-fieldname = 'LFDAT'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-spos = 10.
wa_sort-fieldname = 'EBELN'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-spos = 11.
wa_sort-fieldname = 'EBELP'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-spos = 12.
wa_sort-fieldname = 'AEDAT'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-spos = 13.
wa_sort-fieldname = 'LIFNR'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-spos = 14.
wa_sort-fieldname = 'NAME1'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-spos = 15.
wa_sort-fieldname = 'IHRAN'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-up = 'X'.
wa_sort-tabname = 'i_final_tab'.
wa_sort-spos = 16.
wa_sort-fieldname = 'EINDT'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
*sort l_sort by spos.
CLEAR wa_sort.
wa_sort-spos = 1.
wa_sort-fieldname = 'BANFN'.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
wa_sort-spos = 5.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-fieldname = 'MENGE'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-spos = 2.
wa_sort-fieldname = 'BNFPO'.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
wa_sort-spos = 3.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-fieldname = 'BADAT'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 4.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-fieldname = 'TXZ01'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 7.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-fieldname = 'BEDNR'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 6.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-fieldname = 'PS_PSP_PNR'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 8.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-fieldname = 'FRGDT'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
wa_sort-spos = 9.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-fieldname = 'LFDAT'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-spos = 10.
wa_sort-fieldname = 'EBELN'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-spos = 11.
wa_sort-fieldname = 'EBELP'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-spos = 12.
wa_sort-fieldname = 'AEDAT'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-spos = 13.
wa_sort-fieldname = 'LIFNR'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-spos = 14.
wa_sort-fieldname = 'NAME1'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-down = 'X'.
wa_sort-tabname = 'itab'.
wa_sort-spos = 15.
wa_sort-fieldname = 'IHRAN'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
CLEAR wa_sort.
wa_sort-spos = 16.
wa_sort-fieldname = 'EINDT'.
wa_sort-tabname = 'itab'.
wa_sort-down = 'X'.
wa_sort-subtot = ' '.
APPEND wa_sort TO l_sort.
*CLEAR WA_SORT.
*sort l_sort by spos.
ENDFORM. " f_event_sort
*& Form f_validate_sel_screen
text
--> p1 text
<-- p2 text
FORM f_validate_sel_screen .
*Tracking number
SELECT SINGLE * FROM eban WHERE bednr IN bednr.
IF sy-subrc NE 0.
MESSAGE e013.
ENDIF.
*Wbs Element
SELECT SINGLE * FROM ebkn WHERE ps_psp_pnr IN ps_psp.
IF sy-subrc NE 0.
MESSAGE e014.
ENDIF.
*Cost center
SELECT SINGLE * FROM ebkn WHERE kostl IN kostl.
IF sy-subrc NE 0.
MESSAGE e015.
ENDIF.
*Date
SELECT SINGLE * FROM ebkn WHERE erdat IN erdat.
IF sy-subrc NE 0.
MESSAGE e012.
ENDIF.
ENDFORM. " f_validate_sel_screenHey Ravi,
As you said it is urgent to deliver the report, i will suggest you temporary solution while i debug the program.
In the FM "REUSE_ALV_GRID_DISPLAY", use layout to generate your sorted report for now as shown following:
<b>DATA: G_VARIANT LIKE DISVARIANT.</b>
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = RT_FIELDCAT
IT_EVENTS = I_EVENT
IT_SORT = L_SORT
<b>is_variant = g_variant</b>
TABLES
T_OUTTAB = ITAB.
IF SY-SUBRC <> 0.
ENDIF.
Where g_variant is your custom layout which you will make as default for output.
Hope this helps and let me know if you need more details.
In the mean time, i will look in to the program.
Regards,
Vicky
PS: Award points if helpful -
REGARDING ALV BLOCK DISPLAY AND GRID DISPLAY
HI FRIENDS,
I HAVE A TROUBLE IN DISPLAYNG TWO TABLES TOGETHER IN THE GRID DISPLAY, BUT I CAN DISPLAY USING BLOCKS. I DONT WANT TO USE JOIN STATEMENT IN THE SELECT QUERY.
HELP WITH BY DISPLAYING THE RESPECTIVE CODES FOR THAT.
THANK U IN ADVANCEhi,
type-pools : slis,icon.
data : gd_repid like sy-repid.
data : d_fieldcat type slis_t_fieldcat_alv,
d_fieldcat_wa type slis_fieldcat_alv.
data : begin of itab_mara occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
end of itab_mara.
data : begin of itab_marc occurs 0,
matnr like marc-matnr,
werks like marc-werks,
end of itab_marc.
data : begin of itab_final occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
werks like marc-werks,
end of itab_final.
gd_repid = sy-repid.
loop at itab_emp.
itab_final-matnr = itab_emp-matnr.
itab_final-ernam = itab_emp-ernam.
append itab_emp.
clear itab_emp.
endloop.
d_fieldcat_wa-fieldname = 'MATNR'.
d_fieldcat_wa-seltext_l = 'material number'.
d_fieldcat_wa-col_pos = 1.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'ERNAM'.
d_fieldcat_wa-seltext_l = 'created by'.
d_fieldcat_wa-col_pos = 2.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'WERKS'.
d_fieldcat_wa-seltext_l = 'plant number'.
d_fieldcat_wa-col_pos = 1.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
call function module 'REUSE_ALV_GRID_DISPLAY'.
Reward with points if helpful. -
Hello experts,
When i call the funcation module for REUSE_ALV_LIST_DISPLAY to display for than 5 field columns , then it gives dump saying field symbol not assigned, but the same thing using REUSE_ALV_GRID_DISPLAY works fine for any number of columns.
Kindly help how should this be done??Hi,
Here is the code using 'REUSE_ALV_LIST_DISPLAY'
just check this out...
tables: mara.
type-pools:slis.
data: itab type standard table of mara.
data: fcat type slis_t_fieldcat_alv.
data i_repid like sy-repid.
select * from mara into table itab.
i_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = i_repid
I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME = 'MARA'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fcat
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
IT_FIELDCAT = fcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = itab.
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks & Regards
Ashu Singh
Maybe you are looking for
-
OS AUTHENTICATION on Windows 2000 Server
Hello, Can anyone tell me the best way to create a user that is OS authenticated? How and where to configure the server, database? How should Database server and Client be installed as domain user or Local PC administrator? I have tried everything un
-
How to install Oracle 9i on redhat 9
i have installed 4-5 times oracle 9i on linux ...but the thing is ..as soon i restart my pc..the SQLPLUS doest not start from the redhat 9 terminal ...So plz tell me the step by step procedure how to install Oracle 9i on linux ... .... What & where i
-
Good pdf viewer with different functionalitites
Hello folks, I am looking for a good pdf viewer (would be nice if it could support pdf editiing) to view same pdf document at the same time. Document viewer is good enough but when I want to view the same pdf file which is already open with Document
-
Folio Builder Error: Source Files Not Found
I'm having some weird issues with DPS that are preventing me from editing folios. Whenever I try to update, import or add an article to a folio (whether it's a new or existing folio), I get one of the below error messages saying that the source files
-
Airport Extreme Printer WI-FI Connection
I'm trying to connect my Epson Workforce 630 to Airport Extreme WI-FI network via PC Windows 7 OS. It asks for a Security code instead of a password. The Airport extreme doesn't have a security code. How do I connect?