Problem in copying Request parameter (WAS 5 to WAS 6 Migration)

Hi, After websphere 5 to 6 migration, i am facing the following issue.
i am storing the request paramater attributes in to stack object which is in session and will be retreived back to hit the same url.
But the request paramater is not stored and hence the same url gives exception while loading because required attributes are null.
I need help in understanding why the request paramter is not getting stored in new object but it is avilable for the first time loading.

ManindharGJ wrote:
Thanks
It is not a bug, since it was working fine in WAS 5. I am encountering this problem after upgrading WAS 6 and that too only in specific application instance. Same ear is working fine in other WAS 6 instance that i have migrated.WAS5 is known to be buggy. WAS6 might finally have exposed the bug in your code. You never know. Debug your code. Just find out if the parameters are obtained correctly. Find out if they are stored in session correctly. Etcetera. Or indeed report it to the boys of IBM.

Similar Messages

Problem with Home Sharing. Getting the error "The Requested URL was not Found on this Server"

I recently purchased an iPhone 5. As I do with all of my AppleTVs, iPads, iPods and an iPhone 4 in my home, I connected the 5 to my home network and accessed the shared video library using home sharing. My iTunes library is roughly 85% iTunes purchases, a handful of videos taken with iOS devices, and some video ripped with Handbrake. All of these videos work fine on all devices in my home except my new iPhone 5. When I access the shared video library on my iPhone 5, all of the textual data for all of the videos appears, however, I can only get the iPhone to play 1 video of the dozens in my iTunes library. When I try to play any other, I get the error, "The Requested URL was not Found on this Server."
Interestingly, only one video in my entire shared library displays the artwork associated with it in my iTunes library on my iPhone 5, and that's the one I can stream without a problem. Even more interestingly, that video I am able to stream was ripped using Handbrake (there are a number in my library ripped using Handbrake, but just this one will stream to my iPhone 5 for some reason).
I'm using the latest version of iTunes (10.7) on my home (iMac) computer (running OSX 10.8.2- Mountain Lion)and of course iOS 6 on the iPhone 5. I've tried resetting my iPhone several times as well as restarting my iMac which holds my iTunes library.
Does anyone have any ideas as to what's going on?

Can you see if you can view index page from a browser on iPhone.
Have you seen live streams working from a different computer...
if not then check if a proper crossdomain.xml file in its place(webroot folder).

Problem in copy a string to a message parameter

Hi all,
I have a problem in copy a static string into a message as its parameter.
I use the default function in creating the copy rules...
<copy xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
     <from expression="string(WS1-PSC4-KUY2)">
     </from>
     <to variable="geo_in" part="parameters" query="/ns0:GetLocationByIP/ns0:LicenseKey"/>
</copy>
as the string is a liscence key to use this web service.
However, the string is not copied to anywhere of the outgoing message.
If I use the default type 'literal' and copy to the variable parameter,
it looks like this...
<copy xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
     <from>
                              WS1-PSC4-KUY2
                    </from>
     <to variable="geo_in" part="parameters" query="/ns0:GetLocationByIP/ns0:LicenseKey"/>
</copy>
it gives me an error...
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error]: Element 'from' must have no character [children], because the types content type is element-only.
[bpelc] [Description]: in line 43 of "C:\eclipse\workspace\ip_locate\ip_locate.bpel", Element 'from' must have no character [children], because the types content type is element-only..
[bpelc] [Potential fix]: .
[bpelc] .
Could anybody give me a hint on what's going wrong?

This is my actual code
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.Locale;
public class TestingDate {
      * @param args
     public static void main(String[] args) {
          // TODO Auto-generated method stub
          String dateFormat="EEEE, MMM d h:mm a";
          Date test=new Date(2007,0,19, 19, 31);
          System.out.println(" original date is "+test);
          String stringResult=DateToString(test,dateFormat);
          System.out.println("Date to string is "+stringResult);
          Date dateResult=stringToDate(stringResult,dateFormat);
          System.out.println(" String to date is "+dateResult);
          String stringResult2=DateToString(dateResult,dateFormat);
          System.out.println(" Date to string is "+stringResult2);
public static String DateToString(Date test, String dateFormat) {
         String result = null;
         try {
              DateFormat myDateFormat = new SimpleDateFormat(dateFormat);
                 result = myDateFormat.format(test);
                 //System.out.println(" reslut date is "+result);
          } catch (Exception e) {
               System.out.println(" Exception is "+e);
          return result;
public static Date stringToDate(String strDate,String dateFormat1){
     Date result1=null;
     try {
          DateFormat myDateFormat = new SimpleDateFormat(dateFormat1);
          result1=myDateFormat.parse(strDate);
     catch(Exception e){
          System.out.println(" exception is "+e);
     return result1;
}I am facing problem in getting the actual date. Please suggest the solution.

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

You have to go to autherized iPhone agent.

Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code

unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code. i don't believe mac allows for input on job code or printer code for permission to print

I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist.

Unable to view Behance - Oops! There was a problem with your request

Hi,
Today, I am unable to view Behance and I'm unable to log in as well.
Received the error message - Oops! There was a problem with your request.
Please refresh the page to try again.
Contact support if the problem persists.
Does anyone has the same problem, Anyone knows how to resolve this?

Hi - we can definitely help! To have a private convo where we can give you your accont info, please write us a ticket here and someone will get back to you ASAP:
Behance Support & Forum : Submit a request for assistance

FW: (forte-users) Copy Input parameter

Peter,
That is the behaviour that I have experienced also, so I do not have such
(anchored service object) attributes in my classes anymore but instead add
that service object attribute as an input parameter to all methods in that
class that require access via that service object attribute.
Alternatively, if access to that anchored service object is only required
in the partition that it was created then overriding the Clone method of
the class to return a NIL value in the service object attribute should
work for you.
Mario Emmi
British Aerospace Australia
-----Original Message-----
From: Peter Sham [SMTP:[email protected]]
Sent: Thursday, 28 October 1999 05:33
To: Forte User Group
Subject: (forte-users) Copy Input parameter
Hi folks,
I have this problem where a "copy input" seems to copy
the service object too.
The case is that I have a service object, say
batchmgrso, for batch processing and an object, say
batchproc, as the process. The batchproc has an
attribute for referencing the batchmgrso as it will
create some other process and submit it to the
batchmgrso.
The problem is whenever a batchproc fails and the
batchmgrso tries to re-submit the object from the
queue, and I use a copy input as the mechanism for
passing in the batchproc to the service object, I can
find that not only does the batchproc get cloned, but
also the batchmgrso. It caused a lot of problem and
bombed the method.
When I changes the mechanism to just input in the
method signature, everything works fine.
So is it a forte feature/bug that a copy input would
clone something so "deeply" that even a SO or archored
object would get clone too. Is there any way to avoid
it?
Regards,
Peter Sham.
=====
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

Peter,
That is the behaviour that I have experienced also, so I do not have such
(anchored service object) attributes in my classes anymore but instead add
that service object attribute as an input parameter to all methods in that
class that require access via that service object attribute.
Alternatively, if access to that anchored service object is only required
in the partition that it was created then overriding the Clone method of
the class to return a NIL value in the service object attribute should
work for you.
Mario Emmi
British Aerospace Australia
-----Original Message-----
From: Peter Sham [SMTP:[email protected]]
Sent: Thursday, 28 October 1999 05:33
To: Forte User Group
Subject: (forte-users) Copy Input parameter
Hi folks,
I have this problem where a "copy input" seems to copy
the service object too.
The case is that I have a service object, say
batchmgrso, for batch processing and an object, say
batchproc, as the process. The batchproc has an
attribute for referencing the batchmgrso as it will
create some other process and submit it to the
batchmgrso.
The problem is whenever a batchproc fails and the
batchmgrso tries to re-submit the object from the
queue, and I use a copy input as the mechanism for
passing in the batchproc to the service object, I can
find that not only does the batchproc get cloned, but
also the batchmgrso. It caused a lot of problem and
bombed the method.
When I changes the mechanism to just input in the
method signature, everything works fine.
So is it a forte feature/bug that a copy input would
clone something so "deeply" that even a SO or archored
object would get clone too. Is there any way to avoid
it?
Regards,
Peter Sham.
=====
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

RE: (forte-users) Copy Input parameter

Peter,
Just a quick response before I prepare a code sample for you.
Unfortunately, we pay for our sins as a true cloning operation has to take
into account the (potentially) recursive nature of an object graph and
effectively has to do the equivalent of serialising an object graph (as in
parameter passing to remote methods) without going into an infinite loop
when the object graph recurses back into itself.
The Forte runtime does this quite nicely but if you wish to change its
default behaviour, it's a bit of hard work but it's achievable.
So you need to decide. Is it worth it?
Mario Emmi
British Aerospace Australia
-----Original Message-----
From: Peter Sham [SMTP:[email protected]]
Sent: Thursday, 28 October 1999 07:20
To: EMMI, Mario
Cc: '[email protected]'
Subject: RE: (forte-users) Copy Input parameter
Hi,
Interesting solution!
Just to clarify further. How exactly would you
over-write the clone method. New the object and then
clone all the attributes of the existing object to the
new object, excluding whatever attribute you think is
appropriate?
Regards,
Peter Sham.
--- "EMMI, Mario" <[email protected]> wrote:
Peter,
That is the behaviour that I have experienced also,
so I do not have such
(anchored service object) attributes in my classes
anymore but instead add
that service object attribute as an input parameter
to all methods in that
class that require access via that service object
attribute.
Alternatively, if access to that anchored service
object is only required in
the partition that it was created then overriding
the Clone method of the
class to return a NIL value in the service object
attribute should work for
you.
Mario Emmi
British Aerospace Australia
-----Original Message-----
From: Peter Sham [SMTP:[email protected]]
Sent: Thursday, 28 October 1999 05:33
To: Forte User Group
Subject: (forte-users) Copy Input parameter
Hi folks,
I have this problem where a "copy input" seems tocopy
the service object too.
The case is that I have a service object, say
batchmgrso, for batch processing and an object,say
batchproc, as the process. The batchproc has an
attribute for referencing the batchmgrso as itwill
create some other process and submit it to the
batchmgrso.
The problem is whenever a batchproc fails and the
batchmgrso tries to re-submit the object from the
queue, and I use a copy input as the mechanism for
passing in the batchproc to the service object, Ican
find that not only does the batchproc get cloned,but
also the batchmgrso. It caused a lot of problemand
bombed the method.
When I changes the mechanism to just input in the
method signature, everything works fine.
So is it a forte feature/bug that a copy inputwould
clone something so "deeply" that even a SO orarchored
object would get clone too. Is there any way toavoid
it?
Regards,
Peter Sham.
=====
For the archives, go to:
http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. Tounsubscribe, send in a new
email the word: 'Unsubscribe' to:
[email protected]
=====
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

Mario,
Well. There're 2 ways that I can do it. Avoid copy
input as much as possible ( in fact, I hate copy input
) or code my own clone method.
Coding my own clone method should be a better
solution. So if you have time, please please descibe
it.
Thanks for all the troubles. Regards,
Peter Sham.
--- "EMMI, Mario" <[email protected]> wrote:
Peter,
Just a quick response before I prepare a code sample
for you.
Unfortunately, we pay for our sins as a true cloning
operation has to take
into account the (potentially) recursive nature of
an object graph and
effectively has to do the equivalent of serialising
an object graph (as in
parameter passing to remote methods) without going
into an infinite loop
when the object graph recurses back into itself.
The Forte runtime does this quite nicely but if you
wish to change its
default behaviour, it's a bit of hard work but it's
achievable.
So you need to decide. Is it worth it?
Mario Emmi
British Aerospace Australia
-----Original Message-----
From: Peter Sham [SMTP:[email protected]]
Sent: Thursday, 28 October 1999 07:20
To: EMMI, Mario
Cc: '[email protected]'
Subject: RE: (forte-users) Copy Input parameter
Hi,
Interesting solution!
Just to clarify further. How exactly would you
over-write the clone method. New the object andthen
clone all the attributes of the existing object tothe
new object, excluding whatever attribute you thinkis
appropriate?
Regards,
Peter Sham.
--- "EMMI, Mario" <[email protected]> wrote:
Peter,
That is the behaviour that I have experienced
also,
so I do not have such
(anchored service object) attributes in myclasses
anymore but instead add
that service object attribute as an inputparameter
to all methods in that
class that require access via that serviceobject
attribute.
Alternatively, if access to that anchoredservice
object is only required in
the partition that it was created thenoverriding
the Clone method of the
class to return a NIL value in the serviceobject
attribute should work for
you.
Mario Emmi
British Aerospace Australia
-----Original Message-----
From: Peter Sham [SMTP:[email protected]]
Sent: Thursday, 28 October 1999 05:33
To: Forte User Group
Subject: (forte-users) Copy Input parameter
Hi folks,
I have this problem where a "copy input" seems
to
copy
the service object too.
The case is that I have a service object, say
batchmgrso, for batch processing and an
object,
say
batchproc, as the process. The batchproc has
an
attribute for referencing the batchmgrso as itwill
create some other process and submit it to the
batchmgrso.
The problem is whenever a batchproc fails and
the
batchmgrso tries to re-submit the object fromthe
queue, and I use a copy input as the mechanismfor
passing in the batchproc to the serviceobject, I
can
find that not only does the batchproc get
cloned,
but
also the batchmgrso. It caused a lot of
problem
and
bombed the method.
When I changes the mechanism to just input in
the
method signature, everything works fine.
So is it a forte feature/bug that a copy inputwould
clone something so "deeply" that even a SO orarchored
object would get clone too. Is there any way
to
avoid
it?
Regards,
Peter Sham.
=====
For the archives, go to:
http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. Tounsubscribe, send in a new
email the word: 'Unsubscribe' to:
[email protected]
=====
=====

I get a "the requested URL was not found on this server" when trying to play a song in my iphone

I have a new iphone5 and after synking my songs and musice. I get a "The requested URL was not found on this server" when I click on a song or a music video. It is almost like itunes did not copy my songs from my account to the new iphone.

I was having the same problems with my movies and tv shows. I unchecked them, then rechecked them, and synced all them again. Presto! They are all working again. Thank you.

Problem restoring my iPod - "Resource was not found"

My iPod hardrive is a little bit dodgy (to say the least.) When I try to connect it to my computer, it comes up with an error message that says "ITunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod."
So I restore it, but then another message pops up that says "There was a problem downloading the iPod software for the iPod “iPod.” The requested resource was not found." and then iTunes stops recognizing my iPod.
Any suggestions?

i was also having the same problem. i seem to have fixed the problem but time will tell.
here is what i did.
1. you have to get rid of itunes 7. i did a lot of reading on the internet looking into error 1418 and 1429 and this is happening to a lot of people after they do the software update. trash everything except the itunes music folder, (where all of your mp3's a stored. don't empty the trash until you have your old songs back on your new old version of itunes 6, just to be safe.
2. find a download for itunes 6. not the easiest thing in the world but you should be able to find it on a bit torrent or ask a friend that might still be running on that to send you a copy.
3. you can try and restore your ipod with the old ipod updater that comes with itunes 6, (2006-01-10). it might not work the first time, it might not work after several. but at least give it a go. mine would update sometimes but then when i tried to play songs on it later it would just tear through songs and not play anything.
4. open up your disk utility program. i ran a repair permissions and repair disk first, both times i got a message saying there was a bad btree situation going on. if you don't get this message, i suggest trying to restore it again before you go to step five.
5. you are going to have to completely erase the **** thing. choose erase and pick the default option that comes up (mac os extended (journaled))
6. your ipod is going to be in disk mode now, don't trip out.
7. run the ipod updater again. once again, mine wouldn't allow me to eject the ipod once it was done so i just restarted it.
after all this, it opened up itunes and asked me to name my ipod. everything has been cool now since this morning. good luck!

After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The requested URL was not found on this server"

After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The requested URL was not found on this server".
Anyone have any ideas?

You have two choices to try & fix this: 1. Backup your phone, then restore as a new device, then restore from the backup you first created, or 2. Follow the advise from this poster:
I had the same problem with the black blocks after upgrading to iOS4 on my iPhone. The reason for the black blocks is that the thumbnail images for those particular images have not been created when the Photo Library has been updated to iOS4. I followed the advice on a couple of blogs and fixed the problem.
1. I downloaded iPhone Explorer free software (http://www.macroplant.com/iphoneexplorer/) so I could view the photo data folders on my phone. I could see that the thumbnail images were missing.
2. I followed a slight variation on the instructions on this blog. (http://blog.mbentley.net/2010/06/iphone-ios-4-upgrade-restore-lost-pictures-in-c amera-roll/)
3. First I copied the Photo Data folder by dragging it from the iPhone Explorer window to my Mac desktop.
4. Through iPhone Explorer I deleted the info.plist file in the Media/PhotoData/MISC folder.
5. I also deleted the Photos.sqlite and PhotosAux.sqlite files in Media/PhotoData.
6. I then rebooted the phone and launched the Photo Library.
7. The Library rebuilt it's self again and recreated the thumbnails.
8. The problem was fixed!!! Thank you M Bentley!
I hope this helps - this has been bugging me for 2 weeks.
Regards
Alijm23

I purchased and downloaded a movie and when I it backed up to my computer it changed something and now when I try to watch the movie I get an error message that says "The request URL was not found on this server.? What do I need to do to correct it?

I purchased a movie and downloaded it and when I conected my I Pod to my computer, now I get a message "The requested URL was not found on this server". What do I do to fix it?

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Error: The requested URL was not found, or cannot be served at this time.

Hi gurus,
I have a report that has a parameter file. When I call the report the parameter form is displayed but after I enter the parameter values and click SUBMIT QUERY, I receive this error:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Reports Server name is not specified.
If I run the report without parameter file it runs fine.
Does anyone have an idea on how I can make this work.
Thanks

* Can you please tell what version of Reports you are using ie 6i or 9i and the exact version [ In builder give Help->About] . In this problem we cannot deduce anything from the version. But if it is very old, we can recommend installing the latest patch.
* Please post the full command line request. If you have used any keys in cgicmd.dat , please post the expansion of that keys also.
* If possible as a workaround give paramform=no&paramName=paramValue ... in request till this problem is resolved.
Thanks
The Oracle Reports Team

The requested URL was not found error

Hi gurus,
I have a report that has a parameter file. When I call the report the parameter form is displayed but after I enter the parameter values and click SUBMIT QUERY, I receive this error:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Reports Server name is not specified.
The following is the URL that displays the parameter form
http://RZ-apps-svr/dev60cgi/rwcgi60.exe/getjobid113?server=RZ40Repser
Does anyone have an idea on how I can make this work.
Thanks

"trying to run a report over the web"...
Can you type the exact string into the Address line of a browser and make it work?
I've had this error when
1. Typos
2. & where I should have a ?
3. I didn't have access to the DNS name
4. I was using .runtime from Java and forgot to throw in leading ^ before the \ to make things carry through correctly in NT
Pounding away at the Address line is the easiest way I've found to solve this problem, since 99% of the time it's a typo or malformed URL attempted to be sent via http: invisibly from my app.
Good Luck!

The requested URL was rejected. Please consult with your administrator.

I have used this website many times before to register and pay for events - www.liv.asn.au. Today I can only get part of the way through the checkout process before I get a page with message "The requested URL was rejected. Please consult with your administrator. Your support ID is 9025936629427518335."
I have cleared history & cache, relaunced Safari and rebooted the computer. The same problem also if I use Firefox.
There was a similar question posted before but I couldn't follow the fix - sorry!

Launch System Preferences and open the Network preference pane. Select your Internet connection from the list on the left (it's the one at the top), and click the Advanced button. In the sheet that opens, select the DNS tab. What are the addresses of your DNS servers?
Next, select the Proxies tab. Are any of the boxes checked? If so, what are the settings?
Close System Preferences and launch the Terminal application. Copy or drag -- do not type -- the line of text below into the window, and press return:
kextstat -kl | awk ' !/apple/ { print $6 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can then quit Terminal.

Problem in copying Request parameter (WAS 5 to WAS 6 Migration)

Similar Messages

Maybe you are looking for