Problem in Deployment as Exploded archive
Hi All,
I am really saturated working on above. currently My application deploy as single .ear file. I need to deploy my application as exploded archive. for the same I have changed my deployment scripts which explode my ear file and .jar file inside .ear file in the applications dir of my domain. I also install weblogic as service. so then when I start the weblogic, it has got exception while deploying EJBmodule.
<Error> <Deployer> < BEA-149205> <failed to initialize the application myapplication due to err { module name : EJBS.jar,Error:exception preparing module:EJBModule
If someone has step-by-step process of deploying ear application as exploded in production please send it to me. I will be very thankful.
Apart from that I have few queries.
1. How workshop compile and build application. I know in normal case it uses wlwbuild but I would like in detail from where it gets information about what to build and how.
2. when workshop build the application, where all classes are stored on server (in devlopment mode)
Did you find my experiments with the Oracle AS at http://blogs.sun.com/marcoscorner? Look at the navigation bar to fina all the pieces;-)
Maybe that gives you some hints.
Thanks,
-- Marco
Similar Messages
-
Deployment using exploded archive
Hello, I have just one question:
Is it possible to deploy a large application with 1 archive file ( .ear ) which contains many modules (but modules are not packaged, just some directories with the same name than the module packaged).
Example:
test.ear/web.war
web.war is a directory, the same file structure than a web module packaged ...
Is it possible to do that ? WebLogic will accept that .ear ???
Edited by loopx at 03/30/2007 12:58 AMTo complicate matters I'm also mixing in M2Eclipse & M2EclipseWTP, however I don't think that is part of the issue here.Your assumption is wrong. OEPE does not support M2Eclipse and trying to mix the two will not yield good results.
- Konstantin -
Wls 8.1 sp5 - cannot deploy exploded archive anymore
Hi all,
I used to deploy exploded archive in development mode with wls 8.1 sp4. When browsing the file system, the console used to show a radio button to the left of folders which contained an exploded war.
Since I replace 8.1 sp4 with 8.1 sp5, this radio button does not appear anymore along folders that contain exploded war.
Is this a known issue ? Anyone reproduced the same behaviour ?
Thanks for letting me know of any workaround as this feature is really handy ...
Kind regards,
RegisDear Prasanth,
You're right; so what I did next was to rename my .jspx to .jsp, and this time round I hit this exception while accessing the index.jsp page, any idea what other stuffs I did to do?
Thanks for your help!
javax.servlet.jsp.JspException: Cannot find FacesContext
at javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java:405)
at com.sun.faces.taglib.jsf_core.ViewTag.doStartTag(ViewTag.java:105) -
JSF 1.2 app is deployed only in exploded archive mode if JSF 2.0 facet used
Hi.
I'm developing JSF 1.2 + facelets application. The only way to configure eclipse WTP editors to properly handle xhtml pages is to install JSF 2.0 facet (there was facelets plugin before, but it was superseded by JSF 2.0 facet if I'm not mistaken). When application is deployed on WL, OEPE show message that JSF 2.0 applications can be deployed only in exploded archive mode.
Is there any way to make OEPE to believe that this application is based on JSF 1.2 (as really is)?
Regards,
Vadim.Hi, Ian.
You are stating that it's a JSF 2.0 app by selecting that facet - the tooling relies on your facet selection to determine what features are available.Thought as much. Determining which JSF implementation will be active at deployment time looks like very complicated task and facet version is a reliable source of such kind info. Sadly :)
What "eclipse WTP editors" are you trying to configure?"HTML editor". Without JSF 2.0 facet it doesn't handle JSF taglibs' namespaces and EL expressions content assist/navigation.
The other option is to install JBoss Tools richfaces support, but for various reasons I'd like not to.
After using exploded deployment for a week now I see that it is not that slow as I initially thought (at least for a small project): JSP/XHTML changes picked up, class methods reloaded. Manual republishing is still not as fast as in case of the splitsource deployment, but it don't call it often.
Thanks.
Edited by: user3269289 on Apr 8, 2011 2:34 AM -
Hi,
I am doing J2EE/Struts/EJB Development on Weblogic 8.1.
Have an EAR file with WAR file and bunch of EJB JARs inside that EAR.
I need to do a lot of changes and additions to the GUI,
which is mostly JSPs inside that WAR.
Probably the easiest way to do it would be by editing
JSPs deployed on Weblogic directly, however I can't do it,
because it explodes EAR, but not WAR file inside the EAR.
Is there a way of exploding WAR there [via console or Ant]?
Or can I make changes to JSPs in my build folders and somehow auto-deploy them on running Weblogic ? I've heard of wldeploy, but not sure how to use it for that.
[use Eclipse IDE]
Please help !
Thank you,
Oleg.This should work with exploded archives where an exploded ear contains one or more exploded j2ee modules. If the webapps are exploded then any change made to JSPs is automatically re-compiled the next time you refresh the browser.
exploded_ear/exploded_war/foo.jsp
/WEB-INF/web.xml
So in summary, using an exploded war should do the trick.
-- Nagesh -
Facing Problem in Deploying EAR for Client Java Proxy.
Hi All,
I am facing problems in deploying EAR in PI/XI server.
The scenario is Client Java Proxy to SAP
. I have followed the the pdf-how to create java proxies in 3.0. Using that I have created the EJB module and it archive.
Finally created the EAR without errors. But while deploying the same in PI server, it throws the following error. Please do help me out in providing any inputs on the same.
Deploy trace is seen below:-
Deploy of the ear has errors :
java.rmi.RemoteException: Cannot deploy application sap.com/BusPartnerEAR..
Reason: Errors while compiling:
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemoteObjectImpl0_0_Tie.java:91: illegal escape character
if (method.equals("U0024descriptor")) {
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemoteObjectImpl0_0_Tie.java:98: illegal escape character
if (method.equals("U0024jcoRuntimeMetaData")) {
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemoteObjectImpl0_0_Tie.java:112: illegal escape character
if (method.equals("U0024generationInfo")) {
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemoteObjectImpl0_0_Tie.java:119: illegal escape character
if (method.equals("U0024messageSpecifier")) {
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemoteObjectImpl0_0_Tie.java:152: illegal escape character
if (method.equals("U0024runtime")) {
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemoteObjectImpl0_0_Tie.java:195: illegal escape character
if (method.equals("U0024messageSpecifierRead")) {
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemoteObjectImpl0_0_Tie.java:202: illegal escape character
if (method.equals("U0024messageSpecifier__")) {
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemote_Stub.java:93: illegal escape character
org.omg.CORBA_2_3.portable.OutputStream out = (org.omg.CORBA_2_3.portable.OutputStream)_request("U0024descriptor", true);
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemote_Stub.java:112: illegal escape character
ServantObject so = servantpreinvoke("U0024descriptor", MIOSBusinessPartner_PortTypeRemote.class);
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemote_Stub.java:134: illegal escape character
org.omg.CORBA_2_3.portable.OutputStream out = (org.omg.CORBA_2_3.portable.OutputStream)_request("U0024jcoRuntimeMetaData", true);
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemote_Stub.java:153: illegal escape character
ServantObject so = servantpreinvoke("U0024jcoRuntimeMetaData", MIOSBusinessPartner_PortTypeRemote.class);
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemote_Stub.java:216: illegal escape character
org.omg.CORBA_2_3.portable.OutputStream out = (org.omg.CORBA_2_3.portable.OutputStream)_request("U0024generationInfo", true);
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemote_Stub.java:235: illegal escape character
ServantObject so = servantpreinvoke("U0024generationInfo", MIOSBusinessPartner_PortTypeRemote.class);
^
D:/usr/sap/ECD/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/BusPartnerEAR/EJBContainer/temp/temp1175887267437/com/mud/sAPFICA/businessPartner/_MIOSBusinessPartner_PortTypeRemote_Stub.java:257: illegal escape character
org.omg.CORBA_2_3.portable.OutputStream out = (org.omg.CORBA_2_3.portable.OutputStream)_request("U0024messageSpecifier", true);
21 errors
Awaiting for your replies...
Regards,
DhanaHi,
Thanks for your input..
I have also opend the EAR as ZIP file and deleted the existing listing libaries
apart from the actual implementing Jar and META-INF folder.
I have tried deploying the Jar for the second time, it is throwing the same error.
What I did is...Once the EAR is created, I went to Resource perspective in NWDS and copied the EAR from the EAR project and used the same for deployment.
Is there is anything else to be modified or deleted before deployement?
Regards,
Dhana -
Problem with deploying : SDM could not start the J2EE cluster on the host .
Hello, All
I have following problem with deploying the aplication I get this messenger:
16/09/2008 07:59:44 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : 192.168.0.14
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/PENITU1/LOCALS~1/Temp/temp47114ZChangeRequestDatabase.ear
Result
=> deployment aborted : file:/C:/DOCUME1/PENITU1/LOCALS~1/Temp/temp47114ZChangeRequestDatabase.ear
Aborted: development component 'ZChangeRequestDatabase'/'local'/'LOKAL'/'0.2008.05.03.04.24.17'/'0':
SDM could not start the J2EE cluster on the host Jupiter! The online deployment is terminated. There is no cluster control instance running on host Jupiter which is described in SecureStorage . The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :|Name:JM_T1221612526745_0_penitus15 |Host:PENITUS15 |State:5|HostAddress:192.168.0.205||Name:JM_T1221612357814_0_Jupiter |Host:pfs |State:5|HostAddress:192.168.0.14||Name:JC_Jupiter_JTP_00 |Host:pfs |State:5|HostAddress:192.168.0.14|Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Deployment exception : The deployment of at least one item aborted
I dont'n know How do I solver this error?
- I reviewed the virtual memory and I increase the virtual memory
- I restarted the server and the system
- I reviwed the parameter in the config tool --> cluster --> security storage it is OK
Any suggestion for solver this problem
Thanks
Regards
DSI found this messenger in Additional log information., Please si
17/09/2008 03:04:51 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[004]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[C:\usr\sap\JTP\JC00\SDM\program\log\sdmcl20080917200328.log]/>
<!PATTERN[sdmcl20080917200328.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
Sep 17, 2008 1:04:40 PM Info: -
Starting deployment -
Sep 17, 2008 1:04:40 PM Info: Error handling strategy: OnErrorStop
Sep 17, 2008 1:04:40 PM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
Sep 17, 2008 1:04:40 PM Info: Update strategy: UpdateAllVersions
Sep 17, 2008 1:04:40 PM Info: Starting deployment prerequisites:
Sep 17, 2008 1:04:40 PM Info: Loading selected archives...
Sep 17, 2008 1:04:40 PM Info: Loading archive 'C:\usr\sap\JTP\JC00\SDM\program\temp\temp62604ZIssueDatabase.ear'
Sep 17, 2008 1:04:41 PM Info: Selected archives successfully loaded.
Sep 17, 2008 1:04:41 PM Info: Actions per selected component:
Sep 17, 2008 1:04:41 PM Info: Initial deployment: Selected development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0' will be deployed.
Sep 17, 2008 1:04:41 PM Info: Ending deployment prerequisites. All items are correct.
Sep 17, 2008 1:04:43 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Info: Saved current Engine state.
Sep 17, 2008 1:04:45 PM Info: Starting: Initial deployment: Selected development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0' will be deployed.
Sep 17, 2008 1:04:45 PM Info: SDA to be deployed: C:\usr\sap\JTP\JC00\SDM\root\origin\local\ZIssueDatabase\LOKAL\0\0.2008.04.17.10.53.03\temp62604ZIssueDatabase.ear
Sep 17, 2008 1:04:45 PM Info: Software type of SDA: J2EE
Sep 17, 2008 1:04:45 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Info: Starting cluster instance processes.
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: An error occured while starting a cluster instance.
Sep 17, 2008 1:04:45 PM Error: There is no clutser control instance running on host Jupiter which is described in SecureStorage .
The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :
Name:JM_T1221672404781_2_penitus15
Host:PENITUS15
State:5
HostAddress:192.168.0.215
Name:JM_T1221679486171_0_Jupiter
Host:pfs
State:5
HostAddress:192.168.0.14
Name:JC_Jupiter_JTP_00
Host:pfs
State:5
HostAddress:192.168.0.14
Please check if there is an appropriate running cluster instances.
Sep 17, 2008 1:04:45 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Sep 17, 2008 1:04:45 PM Error: Aborted: development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0':
SDM could not start the J2EE cluster on the host Jupiter! The online deployment is terminated.
There is no clutser control instance running on host Jupiter which is described in SecureStorage .
The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :
Name:JM_T1221672404781_2_penitus15
Host:PENITUS15
State:5
HostAddress:192.168.0.215
Name:JM_T1221679486171_0_Jupiter
Host:pfs
State:5
HostAddress:192.168.0.14
Name:JC_Jupiter_JTP_00
Host:pfs
State:5
HostAddress:192.168.0.14
Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Sep 17, 2008 1:04:45 PM Info: Starting to save the repository
Sep 17, 2008 1:04:46 PM Info: Finished saving the repository
Sep 17, 2008 1:04:47 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Sep 17, 2008 1:04:47 PM Error: -
At least one of the Deployments failed -
Any help will be well received about this problema
Thk
Regards
DS -
Deployment question: exploded EAR application
I've been having some EJB connection problems when I try to deploy an exploded
EAR app.
Here is some background info.
Running WL 6.1 SP2 on Solaris 8
I have the following directory structure for my EAR app which
contains my EJB's and WEB app
/deployment/config/mydomain
/myApp
/META-INF/application.xml
/classes
/ejb
/webApp
/WEB-INF/web.xml
/weblogic.xml
The application.xml file contains all the descriptors for each EJB jar file in
the ejb directory as well as the deployment descriptor to the webApp.
In the Weblogic console I can create a new application called myApp and point
it to the above directory (/deployment/config/mydomain/myApp) and it will deploy
all the EJB's and the web app and I can display the login page to my webApp but
as soon as I try to login and the webApp has to connect to a LOGIN ejb it fails
because it cannot connect to the EJB.
If I deploy each ejb jar file separately into a running weblogic environement
I can login which means I can successfully connect to the EJB's.
Has anyone done something similar to this. I'm following the BANK example that
came with WL6.1, but I have not been successful and wondering if anyone can shed
some light here for me.
If you want to see my application.xml or web.xml let me know and I'll post it
up.
Thanks
RayMake sure your EJB's have a deployment target. I noticed that when I
deployed an exploded ear file, the EJB's weren't deployed to the server,
they were present in the console, but not deployed.
-Brett Schmoll
"Ray" <[email protected]> wrote in message
news:3c374e60$[email protected]..
>
I've been having some EJB connection problems when I try to deploy anexploded
EAR app.
Here is some background info.
Running WL 6.1 SP2 on Solaris 8
I have the following directory structure for my EAR app which
contains my EJB's and WEB app
/deployment/config/mydomain
/myApp
/META-INF/application.xml
/classes
/ejb
/webApp
/WEB-INF/web.xml
/weblogic.xml
The application.xml file contains all the descriptors for each EJB jarfile in
the ejb directory as well as the deployment descriptor to the webApp.
In the Weblogic console I can create a new application called myApp andpoint
it to the above directory (/deployment/config/mydomain/myApp) and it willdeploy
all the EJB's and the web app and I can display the login page to mywebApp but
as soon as I try to login and the webApp has to connect to a LOGIN ejb itfails
because it cannot connect to the EJB.
If I deploy each ejb jar file separately into a running weblogicenvironement
I can login which means I can successfully connect to the EJB's.
Has anyone done something similar to this. I'm following the BANK examplethat
came with WL6.1, but I have not been successful and wondering if anyonecan shed
some light here for me.
If you want to see my application.xml or web.xml let me know and I'll postit
up.
Thanks
Ray -
How the diference " publish as a virtual application vs an exploded archive" ?
how the diference " publish as a virtual application vs an exploded archive" ?
Hi,
The following documentation describes the difference between virtual vs exploded archive deployment.
http://docs.oracle.com/cd/E13222_01/wls/docs103/deployment/deployunits.html
FYI: In OEPE, you can select the deployment option on Server Properties window. Here are the steps to switch between Virtual/Exploded archive deployment:
> In Server view, right click on server configuration | select "Properties"
> Expand WebLogic | and select "Publishing" to modify the mode
-Ram -
Error Message downloading CS5: A problem occurred while extracting the archive..
After dowloading the CS5 Design Premium, I get an error messagin stating "A problem occurred while extracting the archive. Please try downloading the Adobe CS5 Design Premium again." I repeated this process multiple times to no avail. I am trying to download the CS5 design premium on my new laptop, but don't have the software cds to do this. Thus, I can only download the software but after i download the two files required, that error message appears. (I already have my serial number).
Hi nickgtr,
Please try disabling your Antivirus as sometimes it detects the files as virus and removes them while downloading. You can also try downloading after performing Selective Startup.
Please let us know if it helps.
Regards,
Abhijit -
Problem during deploying bw iview from visual composer module on Portal.
Hi all,
we are working on Portal 6.0 sp 11 and using VC 6.0 sp 4 for developinrg R3 and Bw iviews on Visual composer. There is no problem in deploying the r3 iviews on the portal but in case of BW (3.0 and 3.5 ) iviews while deploying it to portal gives the following
Error in executing a process for compilation, .\GUIMachine_Business_Packages\TESTRED_24360\com.autogen.guimachine_1104120045\src.core\Iviewred_ctl.java:46: cannot resolve symbol
symbol : constructor BIOlapFunction (java.lang.String,com.sapportals.guimachine.ep5kit.Iviewred_ctl,java.lang.String,java.lang.String,java.lang.String,int,int,java.lang.String)
location: class com.sap.portal.guimachine.bikit.runtime.BIOlapFunction
BIOlapFunction BIO1OZ = new BIOlapFunction ("BIO1OZ", this, profile.getProperty("System1"), "BIO_DEFAULT", "<Objects id=\"\" type=\"TEMPLATE_METADATA\"><Object id=\"0\" type=\"SCHEMA\" name=\"$INFOCUBE\"/><Object id=\"0\" type=\"CUBE\" name=\"$EMP_CUBE\"/><Object id=\"1\" type=\"MEASURE_DIMENSION\" name=\"Key Figures\" uniquename=\"[Measures]\"/></Objects><Objects id=\"\" type=\"TEMPLATE_PARAMETER\"><Object id=\"CUBE\" type=\"TEMPLATE_PARAMETER\" text=\"$EMP_CUBE\" value=\"$EMP_CUBE\" techname=\"null\" uniquename=\"null\"/><Object id=\"MEASURES\" type=\"TEMPLATE_PARAMETER\" text=\"[Measures].[SALARY]\" value=\"[Measures].[SALARY]\" techname=\"null\" uniquename=\"null\"/></Objects><Objects id=\"\" type=\"TEMPLATE_FILTER\"/>",2,500,"KEY");
^
1 error
can any one help us .
Thanking in advance.
Rajendra RedekarWe are having a similar issue. We have been able to deploy non-BI content on our setup. There seems to be a problem with the BI plugin piece.
Sequence:
1) Confirmation: PAR name may exceed OS limits. To avoid errors PAR was automatically renamed to: com.autogen.guimachine_0509145218.par
2)Error in executing a process for compilation, .\GUIMachine_Business_Packages\bw_query_wizard_model_53826\com.autogen.guimachine_0509145218\src.core\Iview_7k_ctl.java:46: cannot resolve symbol
symbol : constructor BIOlapFunction (java.lang.String,com.sapportals.guimachine.ep5kit.Iview_7k_ctl,java.lang.String,java.lang.String,java.lang.String,int,int,java.lang.String)
location: class com.sap.portal.guimachine.bikit.runtime.BIOlapFunction
BIOlapFunction BIO94 = new BIOlapFunction ("BIO94",
this, profile.getProperty("System1"), "RANKING_TOPN", "<Objects id=\"\" type=\"TEMPLATE_METADATA\"><Object id=\"0\" type=\"SCHEMA\" name=\"CO_C01\"/><Object id=\"0\" type=\"CUBE\" name=\"CO_C01/ZSEM_CO_C01_Q001\"/><Object id=\"1\" type=\"MEASURE_DIMENSION\" name=\"Key Figures\" uniquename=\"[Measures]\"/></Objects><Objects id=\"\" type=\"TEMPLATE_PARAMETER\"><Object id=\"TOPENABLED\" type=\"TEMPLATE_PARAMETER\" text=\"true\" value=\"true\" techname=\"null\" uniquename=\"null\"/><Object id=\"TOPRANKTYPE\" type=\"TEMPLATE_PARAMETER\" text=\"Count\" value=\"Count\" techname=\"null\" uniquename=\"null\"/><Object id=\"TOPVALUE\" type=\"TEMPLATE_PARAMETER\" text=\"5\" value=\"5\" techname=\"null\" uniquename=\"null\"/><Object id=\"BOTTOMENABLED\" type=\"TEMPLATE_PARAMETER\" text=\"false\" value=\"false\" techname=\"null\" uniquename=\"null\"/><Object id=\"BOTTOMRANKTYPE\" type=\"TEMPLATE_PARAMETER\" text=\"Percent\" value=\"Percent\" techname=\"null\" uniquename=\"null\"/><Object id=\"BOTTOMVALUE\" type=\"TEMPLATE_PARAMETER\" text=\"5\" value=\"5\" techname=\"null\" uniquename=\"null\"/><Object id=\"MEASURE\" type=\"TEMPLATE_PARAMETER\" text=\"Tons Billed\" value=\"[Measures].[3VK0EY29VB8ZFHGIZ6JT89G4R]\" techname=\"3VK0EY29VB8ZFHGIZ6JT89G4R\" uniquename=\"[Measures].[3VK0EY29VB8ZFHGIZ6JT89G4R]\"/><Object id=\"DIMENSION\" type=\"TEMPLATE_PARAMETER\" text=\"Sales Basis Weight\" value=\"[0MATERIAL__SLSBASWT]\" techname=\"0MATERIAL__SLSBASWT\" uniquename=\"[0MATERIAL__SLSBASWT]\"/><Object id=\"HIERARCHY\" type=\"TEMPLATE_PARAMETER\" text=\"Sales Basis Weight\" value=\"[0MATERIAL__SLSBASWT]\" techname=\"0MATERIAL__SLSBASWT\" uniquename=\"[0MATERIAL__SLSBASWT]\"/><Object id=\"LEVEL\" type=\"TEMPLATE_PARAMETER\" text=\"Sales Basis Weight Level 01\" value=\"[0MATERIAL__SLSBASWT].[LEVEL01]\" techname=\"LEVEL01\" uniquename=\"[0MATERIAL__SLSBASWT].[LEVEL01]\"/></Objects><Objects id=\"\" type=\"TEMPLATE_FILTER\"/>",2,500,"KEY");
1 error
It points specifically to "BIO94" in this line:
BIOlapFunction BIO94 = new BIOlapFunction ("BIO94"...
Any help is welcome.
Message was edited by: Jeff Tawater -
Problem while deploying ADF application to standalone WLS server
Hi,
I am facing a problem while deploying ADF application to standalone WLS Server.
Following is the error message that I am getting.
[07:24:03 PM] ---- Deployment started. ----
[07:24:03 PM] Target platform is (Weblogic 10.3).
[07:24:07 PM] Retrieving existing application information
[07:24:08 PM] Running dependency analysis...
[07:24:08 PM] Building...
[07:24:13 PM] Deploying 2 profiles...
[07:24:14 PM] Wrote Web Application Module to D:\WorkSpace3\DashboardUi\deploy\Dashboard.war
[07:24:14 PM] Wrote Enterprise Application Module to D:\WorkSpace3\deploy\Dashboard.ear
[07:24:14 PM] Deploying Application...
[07:24:22 PM] [Deployer:149191]Operation 'deploy' on application 'Dashboard' is initializing on 'msDevServer1'
[07:24:27 PM] [Deployer:149193]Operation 'deploy' on application 'Dashboard' has failed on 'msDevServer1'
[07:24:27 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application Dashboard on msDevServer1.: .
[07:24:27 PM] Weblogic Server Exception: weblogic.application.ModuleException:
[07:24:27 PM] Caused by: weblogic.common.ResourceException: DataSource DashboardDb already exists
[07:24:27 PM] See server logs or server console for more details.
[07:24:27 PM] weblogic.application.ModuleException:
[07:24:27 PM] #### Deployment incomplete. ####
[07:24:27 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)Any suggestion how to fix this.
Thanks
AjayI logged into console and browsed to 'Home >Summary of JDBC Data Sources' but not able to locate DashboardDb. Please let me know where to find DashboardDB on wls console.
Also, please let me know how to configure the app to not to auto-deploy JDBC data sources -
Problem while deploying new logon screen par file via NWDS
hi
i have a problem with deploying .par files out of the NWDS.
i want to change the look of the logon screen in our EP Portal (SAP NetWeaver 2004s).
when i just import the (working one) par file into NWDS and deploy it without ANY changes i get then an error when trying to call the portal:
instead of the logonscreen i get some IView error (like IView: N/A).
if i just copy the par file, and put it back to the pcd, everything works fine.
my problem seems to be the "compiling/deploying" via NWDS.
any suggestions?
i followed the guide:
http://help.sap.com/saphelp_nw04/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
i followed also the BLOG:
Modifying The Logon Par(or customising the Logon Screen)
and the help:
http://help.sap.com/saphelp_nw04/helpdata/en/23/c0e240beb0702ae10000000a155106/content.htm
thanks for your help.
markusMarkus,
If you import the par file using NWDS, most likely you wouldn't import the associated jar files (I think 2 jars) that are originally part of the par file. So, when you make changes and update your custom jar, it would lack the two jars and your application would fail. Try downloading the par file using System Administration -> Support -> PCD Administration -> Browse Deployment..
Save the jar file on desktop and then import it to NWDS.
Hope this helps,
Kiran -
Hi! I am new to Jdeveloper.Having problem while deploying on embeded OC4J
hi everybody
I am new to JDeveloper.I am using OracleJDeveloper 10.2.3 version.I am facing problem while deploying any application on embeded OC4J server.I have tried a lot after searching solution on this site,but all of no use.Actually i am not able to established connection with OC4J.Whenever i am testing the connection it`s giving message Connection Failed message.Please provide me the exact solution.I am in need of this so reply as soon as possible.
Thanks In Advance
Rohit TiwaryHi Rohit,
You dont have to create a connection to deploy in embedded oc4j. You can simply right click on the jsf page and run.
HTH.
Regards,
Arun -
Problem about space management of archived log files
Dear friends,
I have a problem about space management of archived log files.
my database is Oracle 10g release 1 running in archivelog mode. I use OEM(web based) to config all the backup and recovery settings.
I config "Flash Recovery Area" to do backup and recovery automatically. my daily backup schedule is every night at 2:00am. and my backup setting is "disk settings"--"compressed backup set". the following is the RMAN script:
Daily Script:
run {
allocate channel oem_disk_backup device type disk;
recover copy of database with tag 'ORA$OEM_LEVEL_0';
backup incremental level 1 cumulative copies=1 for recover of copy with tag 'ORA$OEM_LEVEL_0' database;
the retention policy is the second choice, that is "Retain backups that are necessary for a recovery to any time within the specified number of days (point-in-time recovery)". the recovery window is 1 day.
I assign enough space for flash recovery area. my database size is about 2G. I assign 20G as flash recovery area.
now here is the problem, through oracle online manual, it said oracle can manage the flash recovery area automatically, that is, when the space is full, it can delete the obsolete archived log files. but in fact, it never works! whenever the space is full, the database will hang up! besides, the status of archived log files is very strange, for example, it can change "obsolete" stauts from "yes" to "no", and then from "no" to "yes". I really have no idea about this! even though I know oracle usually keep archived files for some longer days than retention policy, but I really don't know why the obsolete status can change automatically. although I can write a schedule job to delete obsolete archived files every day, but I just want to know the reason. my goal is to backup all the files on disk and let oracle automatically manage them.
also, there is another problem about archive mode. I have two oracle 10g databases(release one), the size of db1 is more than 20G, the size of db2 is about 2G. both of them have the same backup and recovery policy, except I assign more flash recovery area for db1. both of them are on archive mode. both of nearly nobody access except for the schedule backup job and sometime I will admin through oem. the strange thing is that the number of archived log files of smaller database, db2, are much bigger than ones of bigger database. also the same situation for the size of the flashback logs for point-in-time recovery. (I enable flashback logging for fast database point-in-time recovery, the flashback retention time is 24 hours.) I found the memory utility of smaller database is higher than bigger database. nearly all the time the smaller database's memory utility keeps more than 99%. while the bigger one's memory utility keeps about 97%. (I enable "Automatic Shared Memory Management" on both databases.) but both database's cup and queue are very low. I'm nearly sure no one hack the databases. so I really have no idea why the same backup and recovery policy will result so different result, especially the smaller one produces more redo logs than bigger one. does there anyone happen to know the reason or how should I do to check the reason?
by the way, I found web based OEM can't reflect the correct database status when the database shutdown abnormally. for example, if the database hang up because of out of flash recovery area, after I assign more flash recovery area space and then restart the database, the OEM usually can't reflect the correct database status. I must restart OEM manually to correctly reflect the current database status. does there anyone know in what situation I should restart OEM to reflect the correct database status?
sorry for the long message, I just want to describe in details to easy diagnosis.
any hint will be greatly appreciated!
Sammythank you very much, in fact, my site's oracle never works about managing archive files automatically although I have tried all my best. at last, I made a job running daily to check the archive files and delete them.
thanks again.
Maybe you are looking for
-
Update ztable is taking long time
Hi All, i have run the 5 jobs with the same program at a time but when we check the db trace zs01 is taking long time as shown below.here zs01 is having small amount of data. in the below dbtrace for updating zs01 is taking 2,315,485 seconds .how to
-
I dont know if this is any where else in the forum but i am haveing trouble getting a video chat to work. The person im trying to chat with has a macbook as well. at first we had to try a few times to get it to work and then we did. when we got back
-
I just recently installed iLife 06 on a friends laptop here at school. She is a heavy iPhoto user and her library is quite large. The install went through fine, and everything works, except for iPhoto. When I open iPhoto is says that the iPhoto libra
-
Hi All A little overview we have a intake system where users submit requests and we process them . Some of our requests are recurring which means after we get the original request we create manual requests for that recurring request and process them
-
Other login option is not consistent
Hello, Does anyone know how to get the "other" log in option to appear consistently or is this just the behavior of OS X. I have 27, 10.4.7 IMacs that I deployed using a disk image. I configured the Directory Access, Active Directory plug-in on the m