Problem in displaying a custom property

Hi,
I am trying to display the permissions of a user for the documents in KM Content.
I am following this <a href="https://media.sdn.sap.com/html/submitted_docs/nw_kmc/howto/km/flexui/Flexible%20UI%20Components.html#_Toc88990490">link</a> to go about it.
The steps that I followed:
-- I created a new property renderer and a property with the property ID - 'custom_permission_property'.
-- Restarted the portal.
-- I created a Layout Set and set its 'Displayed properties' to custom_permission_property.
-- But when I create a KM Navigation iView, set its Layout Set property and preview it, I just see the root folder 'documents' and a link below displaying the property name 'custom_permission_property'. When I click on the link, nothing happens!! Strange!
Can someone please tell me if there's any other configuration that is to be done?
Thanks & regards,
M.Subathra

In the default collection renderer you have the following <i>Displayed Properties</i> : <b>rnd:displayname(contentLink)</b>.
The <i>(contentLink)</i> is used to set the displayname of the document as an hyperlink, and to open the document.
I do expect the action performed is defined in the Property Renderer of the property
Just try and see what appens.
P.S. you do not need to restart your Portal to activate these changes
Hope this help
Vincent

Similar Messages

Is it possible to show a custom property in a notification email?

Hi all
I would like to know if it is possible to display a custom property in a notification email? As I can understand from Darin Krasles answer here: https://forums.sdn.sap.com/click.jspa?searchID=3062750&messageID=1284727 and his article here: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/90626697-0901-0010-2ca7-86e2a50ce70d there does not seem to be an (easy) answer to this question. But perhaps Detlev, Patricio, Robert or you could help me with this question?
Where can one by the way find the java/class file relating to the email notifications? Is it com.sapportals.wcm.repository.service.subscription.wcm.SubscriptionEventMapStandard?
Kind regards,
Martin Søgaard

Hi Martin,
would you have some updates on this question. i am also facing one similar requirement.
1. users wants a mail notification based on expiry date(custom property) before expiring.
2. In the mail notification, they need some custom properties like document number and other information.
could you please help me in some directions on this? any standard or way to custom part?
thanks,
SK

Custom property not displaying at folder creation or Details screen

Hello everyone
I have created a custom boolean property that I need to have displayed both at folder creation and in the Details screen of a folder after it's created. The property is in the default namespace, and is in the Custom group. I have created a properties file for the label and created the necessary meta data extension. The folder validity pattern is " / " and the Resource Type listed is "normalct" so that it's active for folders only.
Then I went to Property Groups and listed my new property in the Group Items field of the Custom group. The Custom group is a part of "all_groups" so that group is displayed both when a new folder is created in KM and when the Details screen of a folder is displayed.
<i>However,</i> my custom property isn't displaying under the Custom tab when I go to create a new KM folder, nor when I view the Details screen of an existing folder. What configuration am I missing? Do I have to develop a custom property renderer for each new property I need to create? I was hoping I could achieve this result with configuration changes only, but I must be missing something.
Any help would be greatly appreciated and rewarded.
Thanks in advance,
Fallon

Hi Fallon,
actualy, if you want this property to be displayed only for folders and not for documents, you don't need to specify the resource type for folders. Setting "/" or "/**" for "Folder Validity Patterns" and "" (empty) for "Document Validity Patterns" should be enough.
If you sill experience problems, you have to check all settings, for example with the settings suggested in this <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2654">weblog</a>. If you use the "default" Property Group in the property settings, you don't have to enter the <b>Property ID</b> in a special Property Structure Group that in turn is integrated in the all_groups Property Structure Group.
Hope this helps,
Robert

Problem in displaying customized flex window.

0
Hi I've created a customized settings sub-window, with an AIR application and facing a problem in displaying it more than one time from the application, i.e for the first time i select option from context menu then the settings window is displayed but if i try for the second time it doesn't come again. The code is attached for the called function where 'toastWindow_2' is the refrence for customized settings window:
public function showOptionwindow(event:ContextMenuEvent):void
                var check_label:String = event.currentTarget.label;
                var toastWindow_2:options_db = new options_db();
                toastWindow_2.open();
                if (check_label=='List videos'){
            toastWindow_2.settings_windowtab.selectedIndex=1;
                else if (check_label=='Feedback'){
            toastWindow_2.settings_windowtab.selectedIndex=2;
                else if(check_label=='Settings'){
            toastWindow_2.settings_windowtab.selectedIndex=0;
Please suggest the solution asap; Thanks in advance.

Hi there,
A fast suggestion would be to use the debugger and see what's happening. Note down the stuff that is changed when you first click the button and the window opens and see if the stuff is the same the second time ( or if the method is even triggered ). In such situations, the debugger is your best friend.
With best regards,
Barna Biro
Blog: http://blog.wisebisoft.com

How to create Image as Custom Property Type used in Configurable Web Part?

I wanted to create custom configurable web part property for Image.
Example - the screenshot of Image property used in Image web part is shown below:
My goal is to create as many images as possible in custom configurable web part.
I tried to write the code:
[WebBrowsable(true),
WebDisplayName("Example Photo"),
WebDescription("Example Photo of the user"),
Category("Custom User Profile"),
Personalizable(PersonalizationScope.Shared)]
public Image ExampleUserPhoto { get; set; }
However, the result does not display Image configurable web part property.
I wonder why the data type Image does not cause the custom web part to have Image configurable web part property.
Other data types such as Boolean, Enum, Integer, String and DateTime can be used.
How can I create Image as Custom Property Type used in Configurable Web Part?

I have examined that context node __00 has been enhanced,and has a class name z___00. But when I created a new attirubute by right click " Attributes" with wizard under context node __00.There is still a error message "view is not enhaced or copied with wizard".
But when I created a method "getvaliation " in the class of context node zcl__00, the attribute 'valiation' automatically created(at the same time the method "getvaliation' automatically created for the attribute 'valiation') and I need not to create attibute 'validation' by wizard . It seemed as if the problem is resloved. But when I make test for it in web ui .There is a runtime erro message.
Do I need to make some configurations in the business object layer for the checkbox? but the checkbox is only used as a flag to decide whether a backgoud job is needed to be executed.
Edited by: samhuman on Jun 22, 2010 10:31 AM

Adding Custom Property in Catalog

Hi all,
trying to add a new property in the product and SKU level. I have added the below code in custom catalog.xml.
And the below SQL script, i have got by invoking the following like in . In dyn/admin , atg/commerce/catalog/productcatalog , generate SQL link...
but i am getting the following error when executing the SQL script.
Pls let me know the best way to add a custom property in catalog, n generate SQL for same
<item-descriptor name="product" id-space-name="product" xml-combine="append">
<table name="abc_product" type="auxiliary" id-column-name="product_id">
<property name="isABC" data-type="boolean" default="false" column-name="abc"
category-resource="SIM" display-name-resource="abc">
<attribute name="propertySortPriority" value="-1"/>
</property>
</table>
</item-descriptor>
-------------------------------------------------------Error when executing script----------------------
Error starting at line 1 in command:
CREATE TABLE abc_product (
     product_id           varchar2(254)     NOT NULL REFERENCES dcs_product(product_id),
     abc           number(1)     NULL,
     CHECK (abc IN (0, 1)),
     PRIMARY KEY(product_id)
Error at Command Line:2 Column:61
Error report:
SQL Error: ORA-02270: no matching unique or primary key for this column-list
02270. 00000 - "no matching unique or primary key for this column-list"
*Cause:    A REFERENCES clause in a CREATE/ALTER TABLE statement
gives a column-list for which there is no matching unique or primary
key constraint in the referenced table.
*Action:   Find the correct column names using the ALL_CONS_COLUMNS
catalog view

@Gurvinder,
I changed the DDL/SQL script. this script worked in CATAA/CATAB schema, But failed in Publishing schema. Find the problem below in publishing schema.
CREATE TABLE abc_product (
product_id varchar2(254) NOT NULL,
abc_uin number(1) NULL
,constraint sim_product_pk primary key (product_id)
,constraint sim_product_f1 foreign key (product_id) references dcs_product (product_id));
-----------------------CATA Schema-------
CONSTRAINT "DCS_PRODUCT_C" CHECK (nonreturnable in (0,1)) ENABLE,
     CONSTRAINT "DCS_PRODUCT1_C" CHECK (disallow_recommend in (0,1)) ENABLE,
     CONSTRAINT "DCS_PRODUCT_P" PRIMARY KEY ("PRODUCT_ID") // there there is only one primary key
------Publishing Schema----------------------------------
CREATE TABLE "ATGSIMPUB"."DCS_PRODUCT"
(     "ASSET_VERSION" NUMBER(19,0) NOT NULL ENABLE,
     "WORKSPACE_ID" VARCHAR2(40 BYTE) NOT NULL ENABLE,
     "BRANCH_ID" VARCHAR2(40 BYTE) NOT NULL ENABLE,
     "IS_HEAD" NUMBER(1,0) NOT NULL ENABLE,
     "VERSION_DELETED" NUMBER(1,0) NOT NULL ENABLE,
     "VERSION_EDITABLE" NUMBER(1,0) NOT NULL ENABLE,
     "PRED_VERSION" NUMBER(19,0),
     "CHECKIN_DATE" TIMESTAMP (6),
     "PRODUCT_ID" VARCHAR2(40 BYTE) NOT NULL ENABLE,
     "VERSION" NUMBER(*,0) NOT NULL ENABLE,
     "CREATION_DATE" TIMESTAMP (6),
     "START_DATE" TIMESTAMP (6),
     "END_DATE" TIMESTAMP (6),
     "DISPLAY_NAME" VARCHAR2(254 BYTE),
     "DESCRIPTION" VARCHAR2(254 BYTE),
     "LONG_DESCRIPTION" CLOB,
     "PARENT_CAT_ID" VARCHAR2(40 BYTE),
     "PRODUCT_TYPE" NUMBER(*,0),
     "ADMIN_DISPLAY" VARCHAR2(254 BYTE),
     "NONRETURNABLE" NUMBER(1,0),
     "BRAND" VARCHAR2(254 BYTE),
     "DISALLOW_RECOMMEND" NUMBER(1,0),
     "MANUFACTURER" VARCHAR2(40 BYTE),
     CONSTRAINT "DCS_PRODUCT_C" CHECK (nonreturnable in (0,1)) ENABLE,
     CONSTRAINT "DCS_PRODUCT1_C" CHECK (disallow_recommend in (0,1)) ENABLE,
     CONSTRAINT "DCS_PRODUCT_P" PRIMARY KEY ("PRODUCT_ID", "ASSET_VERSION") //there is two primary keys
Regards
Edited by: Bravo on Apr 22, 2013 5:23 AM

Problem with display of JScrollPane

I have made a small GUI.
It has a JFrame and four JPanels are added to the frame.
The placement is done by program and hence layout manager is set to null.
Two of the panels contain JScrollPane.
One scroll pane is associated with a JList.
Another scroll pane is associated with a JTextArea.
I am creating panel components in their respective paintComponent() method.
Now my problem is whenever I run the code, the behaviour of the display of the GUI is erratic. Sometimes it appears perfectly fine other times the JList contents and JTextArea along with their scroll bars don't appear. I have tried running the code on different platforms and different systems. On some systems it works perfectly fine, on some it behaves erratically.
Moreover my experience is that it is giving problem on somewhat lower configuration systems (low RAM and CPU) and running fine on higher configuration systems.
I ran it on my laptop with 512MB RAM and centrino duo processor. (Both on windows and ubuntu it gave the same problem, random display behavior)
I ran it on a desktop with 1GB RAM and higher processor (Both on windows and ubuntu it displayed fine)
Does this problem relate to insufficient painting time or something of this sort? Why is this problem is coming and what's the solution?
Thanks in advance.
Also if anybody has encountered similar problem please do share so that I could at least say this is not a unique one.

The placement is done by program and hence layout manager is set to null.That is (probably) your first problem. Learn to use use LayoutMangers, they save time in the long run.
Sometimes it appears perfectly fine other times the JList contents and JTextArea along with their scroll bars don't appearProbably because preferred sizes are not set correctly. Since you are not using a layout manager that is your responsibility. Easy solution is to use a proper combination of layout managers.
I am creating panel components in their respective paintComponent() method.That is (probably) your second problem. paintComponent() is for doing custom painting, not creating new components dynamically.
I suggest you start by reading the Swing tutorial for example programs.

How can I add a custom property to an object, like a paragraph?

Hi,
We have a merge process that combine multiple document into one and I need to store the filename of the imported file at the beginning of each merge point. Each document that we merge contains a Title paragraph and I was wrongly assuming that I could set the label property of this paragraph with my value for future references, but only to find out that the paragraph object doesn't have a label property.
I also tried setting a custom property by doing this
paragraph.properties["myCustomProperty"] = "value";
It doesn't crash, but if I try reading the value it is always undefined.
I'm looking for alternative, or on how would you approach this, can you please advice?
Your help is much appreciated.
Thanks

Peter Kahrel wrote:
You could label the paragraph's parent story. Is that any good?
Peter.
Well I tought about it, but then I have to find a way to keep track of which paragraph this value belongs to and so far I havent found a way to uniquely identify a paragraph and I can't assume that the merged document won't be edited so I can't use the index.
Peter Kahrel wrote:
Otherwise use a paragraph property that you never use and that doesn't affect composition, such as .bulletsTextAfter
P.
It may be an alternative, but that may cause problem in the furture if they ever decide to use or change that properties. Plus, I'm not sure if can put anything I want in there, but that would be worth the try.

Customer number needed in "GL a/c line item display" for customer gl?

Hi SAP Experts,
while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
How can i solve this problem?
Plz guide me.
I need a quick response.
Regards,
Biswa

Hi,
Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
I hope these helps.
Regards
Ravinagh Boni

Using WE to display a custom box

I have a report that I want the user to be able to sort or filter by clicking on a col header. When the user clicks on a col header, I want a small box to appear just below the col header with radio buttons to choose Asc or Desc and a drop-down list to choose a value to filter the col on. I worked out the javascript for this in a text editor and it works (and I thought it was pretty cool). I've converted the javascript to Crystal Reports syntax and created some Webelements functions:
This first one sets up the styles and js functions -
// WEsortfilter
// Add options to sort A/D and to filter on columne clicked
// Pass in string of values from main rpt and sort ASC
// When col header is clicked - display form with radio buttons and drop
//      down list of values.
//When sort is selected or member of list execute sort/filter.
Function ()
'<STYLE type="text/css">'
+ '.Test{border-style:solid;border-width:1px;border-color:navy;'
+ 'position:absolute; z-index:66; background-color:lightblue;width:6cm;'
+ 'height:.83cm;padding-left:10px;padding-top:5px;font-family:Verdana;font-size:9pt;}'
+ '.sortlink{font-size:10;font-family:Verdana;color:blue;}'
+ '</STYLE>'
//End of styles
//Javascript to call sort/filter box
+ '<SCRIPT LANGUAGE="JavaScript">'
+ 'function displaySortFilter(myid){'
+ 'var topObj=document.getElementById(myid).offsetTop;'
+ 'var leftObj=document.getElementById(myid).offsetLeft;'
+ 'var cdObj=document.getElementById("Test").style;'
+ 'cdObj.display="";'
+ 'cdObj.left=leftObj;'
+ 'cdObj.top=topObj+26;'
+ '}</SCRIPT>'   //End of function
+ '<form name="sortfilter">'
+ '<div ID="Test" NAME="Test" class="Test"'
+ 'STYLE="display:none">'
+ '<div id="divradio" STYLE="position:absolute">
+ '<input type=radio name=radio ID=radio value="asc">'
+ '<Span>ASC</Span>'
+ '<input type=radio name=radio ID=radio value="desc">'
+ '<Span>DESC</Span>'
+ '<SELECT NAME="filteroptions" ID="filteroptions" >'
+ '<OPTION VALUE="0" selected>Choose One<BR>'
+ '<OPTION Value="00">First<BR>'
+ '</SELECT>'+ '</div></div></form>'
The second function creates a link for the user to click:
//WEcallSortFilter
Function ()
'<A Style="text-decoration:underline" ID="sbu" class="sortlink" href="" onClick="'
+ 'displaySortFilter(this.id);return false">SBU</A>'
The third one adds the style and js functionality to the report:
//Display sortfilter custom function
WhilePrintingRecords;
WEsortfilter
The last one adds the link to the report for the user
//Call sortfilter custom function
WhilePrintingRecords;
WEcallSortFilter
When I run this in the report through Infoview, the box pops up, however,
1)     it doesn't show up right under the link clicked, but in the location where it was placed in Crystal Reports design view. It shows up like a static object instead of at the location clicked.
2)     When the box displays, it is transparent. The other text on the rpt shows right through the box. I've tried changing the z-index to no avail. And no, making the box a solid color doesn't make it opaque. The other text showing through makes it difficult to click on any of the radio buttons.
All this is beyond the WE examples, but I''ve to kick it up a level (or three) to get this project done.
Thanks

hey, ran some tests on your scenario. to answer your questions...
1) all of the functions are designed so that you don't have to make copies of them...all controls should be aok with being on a report more than once, as long as the element names are different...the ones that create on-click functionality (such as the collapsible section) require a different name for each control or you'll run into problems...the last iteration of the control on the report will be the only one that (sort of) works.
that being said, i created 2 formulae and ran your code without any issues with a duplicate of the function.
the only things that should cause something like this is
(a) a control name starting with a number or containing certain non alpha-numeric characters...they follow the same rules as javascript...unfortunately this little tip was not in the user guide even though it was on the list (my fault, sorry) or
(b) two control names that are the same or
(c) a duplicate of the same formula on the report.
2) another little tip that seemed to not make it into the user guide is to follow the same ordering principles on a report that you would with normal layering when designing a crystal report...i.e. right-click on objects in the designer and choose Format, then use the Move object action to bring the objects to the front.
note that if there is a select menu below these controls you will not be able to have the collapsible section (or any other control) cover that select menu up...this is a known issue in internet explorer and there is no workaround for that one.
hope that this helps,
jw

Custom Property in Microsoft Word 2010 Document Template and Sharepoint 2010 Content Type not Syncing up

I wrote a macro in a Word 2010 template with a custom property called HeaderFooter (a Yes/No value). When the property is changed to No, the header and footer are hidden, otherwise, the header and footer are displayed.
I added the template to a SharePoint 2010 Document library, with a content type DocInformation and a column name HeaderFooterOffOn that I want to map to the custom property HeaderFooter in the Word Document.
The macro isn't working in SharePoint, though, because when the user clicks on the HeaderFooterOffOn in the DIP of the Word Document, the Word Custom Property (HeaderFooter) isn't changing with it.
How do I get these two synced up, so that when the SharePoint column is changed, the Word Document's custom property simultaneously updates with it?

Hi kevinkevinc,
There is no direct way to run macro in SharePoint
As a workaround, I suggest you use SharePoint Event Receiver to run some custom code when column changed.
Here is a similiar thread for your reference:
http://social.msdn.microsoft.com/Forums/office/en-US/249249e2-3263-4001-86fa-bda342d95f35/run-word-macro-on-newly-uploaded-sharepoint-word-documents?forum=sharepointdevelopmentlegacy
More information:
SharePoint Event Receiver：
http://msdn.microsoft.com/en-us/library/ee231563.aspx
http://msdn.microsoft.com/en-us/library/ff398052.aspx
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Problem in Displaying text Variable

Hi All,
I have problem in Displaying text Variable in the column header.
My requirement is as follows.
Column Level:
0Calmonth/Year
Key figures
Keyfigure1 - Current Month - Text Variable1
Keyfigure2 - Previous Month - Text Variable2
Keyfigure3 - Previous Month - Same as Text Variable2 - Display same month
So based on each 0Calmonth/year these three keygirues should display in Header section like.
Selection screen
0Calmonth/Year - 03.2005 - 06.2005
Result should be for each month.
0Calmonth/Year
03.2005 04.2005 05.2005
03.2005 | 02.2005 | 02.20005 04.2005 | 03.2005 | 03.2005 05.2005 | 04.2005 | 04.2005.
I have created two text variable with Customer exit.But not able to show exact months in the header section.
For first three columns months are coming exactly, but from fourth columns it should display next month, but it is not coming.
I have tried to code, but not successfull.
Please help me how to go about this.
Will assign full points.
Regards,
Vijay

hi
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
it might helpful for you
assign points if helpful

Urgent : Problem in displaying 0fiscper as dynamic data col.

Hi SEM gurus,
I have a problem in displaying 0FISCPER in data columns. Say, in my planning level I have restricted 0FISCPER to 0001.2005 to 012.2005. and I did selected in data column, Dynamic for 0fiscper.
Now when I run my lay out for keyfig. 0Amount the lay out is like this
Customer Amount Amount Amount
Xxxxxx       10 20     30
Its not displaying the monthwhat I want in the lay out should be like this
         001.2004 002.2004 003.2004
Customer Amount Amount Amount Amount
Xxxxxx     10     20      30    40   .........
Can any one Please help me out to fix this ???
Thanks a bunch in advance
Rohith.
Message was edited by: rohith gentle
Message was edited by: rohith gentle

Rohith,
change HEADING column in the 2nd screen of the layout design to "0FISCPER Amount".
I think, current HEADING is named as only "Amount".
This will give layout as
Customer 001.2004Amount 002.2004Amount 003.2004Amount
hope that helps.
Hari Immadi
http://immadi.com
SEM BW Analyst

Problem in displaying records in multi record block

Hi all,
I have a problem in displaying records in a multi record block in a form.
I have 1 control block and 1 data block(multi-record block).
Control block has one item CUSTOMER-ID. Data block has many other items related to customer.
when a value is entered in customer-id text item, all the relavant details should be displayed in the data block.
but, the records are overlapping in the same line in the data block, actually they have to be displayed one record per one line.
The code is,
IF :CUST_BLOCK.CUST_ID IS NOT NULL THEN
GO_BLOCK('XBSI_CONTRACT_PRICE_FACTORS');
FOR C1 IN C
LOOP
:XBSI_CONTRACT_PRICE_FACTORS.CUST_ID:=c1.site_use_id;
:XBSI_CONTRACT_PRICE_FACTORS.CAT_ID:=c1.ipc_category_id;
:XBSI_CONTRACT_PRICE_FACTORS.MFG_ID:=c1.mfg_category_id;
:XBSI_CONTRACT_PRICE_FACTORS.INVENTORY_ITEM_ID:=c1.inventory_item_id;
:XBSI_CONTRACT_PRICE_FACTORS.PRICE_BASIS:=c1.price_basis;
:XBSI_CONTRACT_PRICE_FACTORS.PRICE_FACTOR:=c1.price_factor;
END LOOP;
Please help me out..
Thanks in advance!
Suman

Hi Suman
IF :CUST_BLOCK.CUST_ID IS NOT NULL THEN
GO_BLOCK('XBSI_CONTRACT_PRICE_FACTORS');
first_record;
FOR C1 IN C
LOOP
:XBSI_CONTRACT_PRICE_FACTORS.CUST_ID:=c1.site_use_id;
:XBSI_CONTRACT_PRICE_FACTORS.CAT_ID:=c1.ipc_category_id;
:XBSI_CONTRACT_PRICE_FACTORS.MFG_ID:=c1.mfg_category_id;
:XBSI_CONTRACT_PRICE_FACTORS.INVENTORY_ITEM_ID:=c1.inventory_item_id;
:XBSI_CONTRACT_PRICE_FACTORS.PRICE_BASIS:=c1.price_basis;
:XBSI_CONTRACT_PRICE_FACTORS.PRICE_FACTOR:=c1.price_factor;
next_record;
END LOOP;
Try this. you are trying to show all the records in same line. so its overlapping.
Thankyou
[email protected]

How to make the display of custom column names in UWL(not bother abt values

Hi all
i want to make the display of custom column names in UWL ( for example GP)
i dont want or not looking about values for those custom columns . i know that thru custom connector we can achieve to retrieve the values for those custom columns. but currently i am looking only just to display the custom column names( for example GP custom column names, just i want to display the name of the columns ) in UWL .
Thanks
Sunil

Hello Prashant,
You can add the control to your custom pagelayout, the following article has an example:
http://spandps.com/2012/02/22/showing-the-audience-target-field-in-an-editmodepanel-sharepoint-sp2010-in-projectserver-ps2010/
Btw, the SPFieldTargetToControl has a required property:
http://msdn.microsoft.com/en-us/library/microsoft.office.server.webcontrols.fieldtypes.spfieldtargettocontrol.required(v=office.14).aspx
- Dennis | Netherlands | Blog |
Twitter

Problem in displaying a custom property

Similar Messages

Maybe you are looking for