Custom property not displaying at folder creation or Details screen

Hello everyone
I have created a custom boolean property that I need to have displayed both at folder creation and in the Details screen of a folder after it's created.  The property is in the default namespace, and is in the Custom group.  I have created a properties file for the label and created the necessary meta data extension.  The folder validity pattern is " / " and the Resource Type listed is "normalct" so that it's active for folders only.
Then I went to Property Groups and listed my new property in the Group Items field of the Custom group.  The Custom group is a part of "all_groups" so that group is displayed both when a new folder is created in KM and when the Details screen of a folder is displayed.
<i>However,</i> my custom property isn't displaying under the Custom tab when I go to create a new KM folder, nor when I view the Details screen of an existing folder.  What configuration am I missing?  Do I have to develop a custom property renderer for each new property I need to create?  I was hoping I could achieve this result with configuration changes only, but I must be missing something.
Any help would be greatly appreciated and rewarded. 
Thanks in advance,
Fallon

Hi Fallon,
actualy, if you want this property to be displayed only for folders and not for documents, you don't need to specify the resource type for folders. Setting "/" or "/**" for "Folder Validity Patterns" and "" (empty) for "Document Validity Patterns" should be enough.
If you sill experience problems, you have to check all settings, for example with the settings suggested in this <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2654">weblog</a>. If you use the "default" Property Group in the property settings, you don't have to enter the <b>Property ID</b> in a special Property Structure Group that in turn is integrated in the all_groups Property Structure Group.
Hope this helps,
Robert

Similar Messages

  • Custom Infotype not displaying locked records in the list screen (3000)

    I have a custom infotype (9xxx) that will not display the locked records (locked indicator (sprps) is set to X) in the list screen (3000) in PA20 and PA30.
    Any ideas on what may be causing the records to not display in the list screen?
    Thanks,
    Ted

    Hi,
    for creating both employee and appliciant infotype you must check 'Both'  in PM01  IT tab.
    Regards.

  • Service Manager Portal not displaying VM console and related details

    Hi All,
    We have deployed private cloud with system center products using Cloud Services Process Pack and we have deployed Service Manger portal for VM provisioning in Cloud
    The Service Manger portal does not display VM console and VM details
    I have following queries
    How to take remote console of VM deployed by end user through service manager portal
    How will user come to know quota limit utilized in cloud under his account
    The VM are deployed through SCSM portal are in shutdown state how to auto start the VM after provisioning
    Please help since we are not able to find any solution for the above
    Appreciate if any workaround is available for the same
    Thanks
    Manzoor Ahmed

    The component of System Center that is capable to give console access to your VMs, is App Controller.
    Once the user are logged in here, they should see their quota, limits and resources available.
    Yes, the VMs are powered off by default when using the CSPP. You can edit the runbooks and add a task that will start them after provisioning.
    For your information:
    Many things has changed since the release of Cloud Service Process Pack. A new set of tools are provided with Windows Azure Pack to have a streamlined Infrastructure as a Service offering within the enterprise. Windows Azure Pack will leverage VMM (in the
    same way as SCSM does) but in conjunction with SPF (component within Orchestrator) to give you a framework that is identical to Windows Azure (Microsoft's own cloud) running on-premise.
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • Custom fields not display in SRM5.5 Basic Data Frame

    Hello Everybody,
          I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
         No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
        I added these fields by help of 672960 OSS notes..
       Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
      Is there anything else do i need to display custom fields in basic data frame??
    I have one more question..
      When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
      I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
      To display all the fields which are display in GUI Mode also should display in URL..
      To bring this functionality , What do i need to do?
      I appreciate if you answer these questions..
    Thanks,
    John.

    Hi Disha,
    We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF".  We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
    Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
    Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
    I will be gald to provide any kind of info.
    Thanks in advance...

  • Apple Mail software - email is not displaying in folder

    I kept thinking it was something I was doing wrong (and it may still be!).
    I have Apple mail (my own domain, not Google's email system)...and my folders are kept in the cloud (Apple's cloud).
    Ever since I went to Mavericks when I try and browse through my folders the emails are listed there but clicking on an email does not display its contents. It is  a blank screen. My in-box is always fine. But my folders I sort mail into… a list with blank for the individual email's contents.
    I read through the forums and the best I could find was that the email folder needed to be rebuilt. But doing so only worked temporarily. If I quit my email and go back in, same problem. And it's also really, really slow in displaying the list.
    Very odd.
    ><({(º>  

    Figured it out...
    Turned out iCloud does not like odd characters in the front of folders.
    I had Tildes in front of special folders and folders with older projects and clients.
    Once I removed the Tilde everything got a lot better.

  • Custom barcode not displayed after changing width

    Hi All,
    I have a requirement to increase the size of the barcode from 9cm to 10cm in a SAPscript form.  Previously we were using the standard barcode BC_128B.  Using SE73, you can see the the configuration of standard barcode BC_C128B.
    Bar code        Width       Unit      
    BC_C128B      9,00        CM       
    ZBC12810     10,00        CM       
    ZBC12810 is the custom barcode that I created which slightly differ from the standard object (different width and description).  I also created a custom device types that is used by the barcode and then included the custom barcode in each one of the custom device types.
    The above steps I did to create the custom bar code and device types can be found here: [Traditional Barcode printing for Smart Forms and Sapscript|http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm]
    I then changed the barcode defined in the sapscript.  The result was the barcode is not displayed anymore and only the barcode text is being displayed.
    Your inputs are greatly appreciated.

    Hi,
    Kindly go through these links below:
    How to create a new BARCODE PREFIX   (for SAPScripts)
    Re: SAPScript with Bar Code
    Hope it helps
    Regrds
    Mansi

  • User Profile custom property not appearing in search crawled property

    Actually I have migrated search services from one server to another server in that server I have created new custom user profile property but it is not appearing in search service crawled property any one please help me out in this.

    I got the same problem and i fixed it.
    If you take a look on all User Profile properties(cutsom or standard) you will note that they are all mapped to the property "ContentsHidden"(in addition of its property).
    I concluded that you have to map all user profile properties to "ContentsHidden"
    Please mark as usefull if it resolved the problem.
    may this post help you
    http://moudhafersalhi.com/2014/04/27/user-profile-property-not-appearing-in-search/

  • Robocopy not copying the folder creation date

    We migrate the data between 2  Windowsfile servers using robocopy and it works finew ith issues. Only issue is it doesnt copy the folder creatiopn date from source to destination server, it does copy the file creation date without any issues. Command
    we use is as below.
    robocopy.exe %1 %2 /COPYALL /MIR /ZB /R:10 /W:2 /TEE /DCOPY /LOG+:robocopy_%3.log
    This command is called using a batch file where we specify the source and destination using the below syntax.
    call Robocopy_Module.bat "C:\Backup" "C:\Restore"
    Kindly advise if this is normal behaviour , if not what is the correct command used to copy the Folder creation dates.

    I was using like this
    Go to CMD prompt,
    RUN as Administrator
    Type  
    robocopy "source path" "destination Path" / MIR
    It will copy including time stamps.
    or create seprate folder in a destination place and copy everything into that folder.
    It will work.

  • Regarding the script of sales order(customer no. not displaying)

    Hai all,
    I have made a zcopy of sales order standard program(ZRVADOR01) and sales order standard script(ZRVORDER01). now my requirement is , in the displayed script there is info window. In that window customer number with field vbco3-kunde is displayed. but the requirement is they want this customer number in the address window. but when i run the transaction with debugging , it is not displaying this vbco3-kunde value in the address window.how to transer this value from this info window to address window . i have tried with set parameter but it is not working. i have tried by declaring a variable in the copied z-standard program and calling in z-standard script but still it is not displaying the value. please let me know the solution for this issue as soon as possible.
    points will be awarded.
    Thanking u in advance,
    A.Srinivas

    Hello,
    Try with using VBDKA-KUNNR instead of the VBCO3-KUNDE.
    Regards,
    Naimesh Patel

  • Custom fonts not displayed when PDF is generated using 10g Report builder

    Hi
    I have two fonts , abc.ttf and def.ttf which I have placed under C:\Windows\fonts. One of these displays a logo and the other displays barcode
    I have added the environment variable REPORTS_PATH which has value C:\Windows\fonts. I have also added entries for PDF Subset in uifont.ali.
    But still when I run the report and out to a PDF file, the fonts are not displayed. They are remapped to some other fonts.
    When I check PDF document properties in Adobe reader, under fonts tab it says
    abc
       Type:Type1
       Encoding:ANSI
       Actual Font: Adobe Sans MM
       Actual Font Type : Type 1
    def
       Type:Type1
       Encoding:ANSI
       Actual Font: Adobe Sans MM
       Actual Font Type : Type 1
    uifont.ali entries
    [ PDF:Subset ]
    # This example shows how to subset Arial True Type font into the PDF file
    # Arial = "Arial.ttf"
    # The True Type font files must exist in any one of the folders specified in
    # REPORTS_PATH.
    abc= "abc.ttf"
    def="def.ttf"
    In Oracle reports builder, I am able see these fonts and select them in my report layout
    I am able to see the fonts in Preview/screen output while running RDFs in my reports builder, but PDF output doesnt display these fonts
    Is there anything else which is required to do ? Do I need to restart the machine after environment variable is added ?

    In one PC were Report Builder is installed, we see "COURIER NEW - WESTERN" font and the RDF created / saved in that font works fine on server. I don't know if this helps!

  • Adobe Form Custom Value Not Displayed

    Hi,
    In ISR Adobe Form , When I review the form , the values custom values are displayed.But When I click on display form, The blank original form is displayed.How can I populate the custom values in the display form...
    Please help...
    Regards,
    Rheema Raheal

    hi,
    I have designed an isr adobe form, I am able to enter the values in the form.When I choose send , I am able to get the notification number.
    When I use the notification no in the transaction iqs2, All the cahracteristics in the form are blank.I want the values of the form to be stored.
    Please help me getting the values in the adobe form after creating the notification
    Regards,
    Rheema Rahael.

  • Error not displaying while Invoice Apprvoal in detail tab

    Hi,
    Here is the problem we are facing. We are at SRM 5.0 with Extended Classic and no IMS configured.
    u2022 Activity u2013
    1. Invoice with value more than PO value is posted and triggered for approval. Zero Tolerance  maintained.
    2. Posted Invoice has status u2013 u2018To Be Corrected Manuallyu2019.
    3. Work Item triggered for approval and is in Approver's inbox.
    4. Approver approves the Invoice.
    u2022 Expected Result u2013 If Approver tries to approve the Invoice then he/she should get error message u2018Document Contains Errors Approval Not Possibleu2019.
    u2022  Actual System Behavioru2013
    1. If approver tries to approve the Invoice at header level then error message u2018Document Contains Errors -
    >Approval Not Possibleu2019 is getting populated. But we have deactivated the approval/rejection button at the header level.
    2. Approver is opening up the invoice document and then approves the Invoice. At that time, error message mentioned in point 1 is not getting populated. Instead the message appears as u2018The Invoice Approvedu2019. This is a false indication to approver and work item remains in Approveru2019s queue.
    Any solution to resolve this issue?

    Hi AP,
    Same approver when approves the Invoice at header level, error msg displayed properly. But if he tries to appove the invoice in detailed view - clicking on SAVE - then the error msg is not displayed and instead it shows Invoice Approved and workitem remains in his work list.
    Is this because of Autho issue? In that case what autho objects we need to check?
    My wild guess about this issue could be because system is not checking if the Doc is complete or not to trigger the respective message. Any thoughts?
    Thanks.

  • Email alerts not displaying in notification center on lock screen (iOS 7)

    Hi,
    I am having issues receiving email alerts in the Notification Center when accessed from the lock screen.  I don't want to see the alert directly on the lock screen, only in the notification center.  Here are my settings:
    So basically, the Notification Center is allowed on the lock screen, but the alert itself will not be displayed on the lock screen.  However, when I get a new email, it does not display an alert.  If I unlock the phone, and check the Notification Center, the alert is there.  If I turn the "Show on Lock Screen" setting on, then I do in fact get the alert both on the lock screen and the notification center.  What is really weird is that if I check the Notificaiton Center from the lock screen (where nothing is displayed), and then unlock the phone the alert is no longer in the Notification Center, as if I had already accessed it. 
    What is also strange is that these exact settings work perfectly fine for texts and fairly consistently for my personal email.  However, it has never worked for my work (Exchange) email.  In both cases I am using Push. 
    Is anyone else able to replicate this issue, or do you have a solution?
    Thanks,
    Aaron

    Still an issue for me in 7.1

  • Flash Player not displaying control bar: pause, stop, full screen, etc

    How do I change settings to allow the control bar to appear?
    Thanks.

    Controls are in the "interface" embedded into the pages containing the Flash content. Flash Player doesn't "create them". It displays them based on the code received from the page. If there's a problem with the page code, or the browser isn't reading the code properly, the controls may not display.
    Basically, you can't fix the web page from the player.
    Does this happen with ANY videos or just certain sites or a specific saite?

  • Time Machine does not display old files: the star wars screen stays stuck

    I have been looking for an known report, but can't find it.
    In Time Machine, I don't see the 'star wars' panels anymore. It was working when I installed it.
    In an activated Timemachine screen, the date slider on the right of the screen does not react. Only the front most screen is seen = "now".
    I used to have time machine on an airportextreme; but because of adding a shared USB printer I had to move the external HDD to my own iMac.
    Time machine tells the backups are successful.
    Did I do something wrong by moving the HDD around?
    Did I do something wrong with 'permissions'? [I added myself as a user with read permissions.]
    Should I reinstall Timemachine?
    thanks in advance
    albert

    alberti-nl wrote:
    Hi, and welcome to the forums.
    I used to have time machine on an airportextreme; but because of adding a shared USB printer I had to move the external HDD to my own iMac.
    Time machine tells the backups are successful.
    Did I do something wrong by moving the HDD around?
    Sort of. Time Machine stores backup differently when they're done locally vs. over a network.
    Double-click your external HD. It should have a "sparse bundle" including the name of your computer. Those are your network backups.
    Double-click the sparse bundle to mount it, then try Time Machine again. If that doesn't work, quit Time Machine and control-click the TM icon in your menubar, or right-click the TM icon in your Dock, and select the +Browse ...+ option. That should show your backups in a small window; select them and click the +Use Selected Disk+ button.
    Post back with your results and we'll explain further and see how you want to proceed.

Maybe you are looking for