Problem in displaying Total No.of Lines in ALV report header.

Hi guys,
my field symbol internal table is having records in which "Compliance" field is having YES or NO values. now requirement is to display
Total No. of Compliances which are having YES.
lets say, internal table is having 10 lines. in which compliance field is having 6 YES and 4 No respective values .
now i want to display header as No. of Compliances : 6
following is my code to display Total no.of lines in internal tables.
* total no. of records selected
   DESCRIBE TABLE <table> LINES ld_lines.
   ld_linesc = ld_lines.
   CONCATENATE text-004 ld_linesc
                     INTO t_line SEPARATED BY space.
   wa_header-typ = 'A'.
   wa_header-info = t_line.
   APPEND wa_header TO t_header.
   CLEAR: wa_header, t_line,ld_lines, ld_linesc .
My data is there in Field-Symbol table.
Now i want to display No.of compliances . could anybody please help me out in this.
Thanks in Advance.
Regards
satish

HI,
You can use another option like below,
<Table>[] = <Table1>[]
delete table1 where compliance = 'NO'.
DESCRIBE TABLE <Table1> LINES ld_lines. .. follow your logic as above.
Hope this will helps you,
Thanks & Regards,
Suresh M

Similar Messages

Displaying data in Two line in ALV report

Hi,
I want to know how to display the data in alv in two lines for Fild name as well as for fild value
like in below case
wa_fieldcata-fieldname = 'WRBTR'.
   wa_fieldcata-seltext_l = 'AMOUNT IN DOCUMENT CURRENCY'.
   wa_fieldcata-outputlen = 18.
   wa_fieldcata-DO_SUM     = 'X'.
   APPEND wa_fieldcata TO it_fieldcat.
   CLEAR wa_fieldcata.
by this on alv COLUMN headig is coming as 'AMOUNT IN DOCUMENT CURRENCY' in one linw i want to display 'AMOUNT IN '   in first line and then 'DOCUMENT CURRENCY' below that
'AMOUNT IN
DOCUMENT CURRENCY' ***
similarly how to display value of three fidls in one column
like for a vendor   I have one column Vandor name in that column i want to display from table LFA1,
NAME1
NAME2
NAME3
NAME4,
in one column only how to do it.
regards,
zafar

Hi,
Ref . early reply can u help me how to uset his in ALV code and can u give some example for this how to display it in two lines as my column heading is of 60 characters 5 word i want to display it in two line in one column only .
How to use : SLIS_EV_AFTER_LINE_OUTPUT
to get this.
or is there any other method.
regards,
zafar

Problem in displaying total text in total line

Hi...I am facing problem in displaying total text in first column of total line. Width of first column is sufficient to display text "TOTAL". But somehow its not getting displayed....Please Help...?
code is as follows:
ls_layout TYPE slis_layout_alv .
ls_layout-totals_text       = 'TOTAL'.
ls_layout-colwidth_optimize = 'X'.
ls_layout-no_vline          = 'X'.
ls_layout-no_hline          = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program     = gv_repid            " Report ID
      i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = ls_layout
      it_fieldcat            = gt_fieldcat         " Field Catlog
    TABLES
      t_outtab               = gt_cost_output      " Output Table

hi me to i have the same problem
   FORM create_layout .
data: text(20) TYPE c.
it_layout-window_titlebar   = text.
it_layout-colwidth_optimize = 'X'.
it_layout-totals_text       = text-013."'Totals'(013).
it_layout-cell_merge        = 'X'.
it_layout-zebra             = 'X'.
ENDFORM.
but no output total in alv
also i had another broplem i had unit i wanna show it in total line and calc value in header

Problem in displaying total no of pages in Smartform

Hello experts,
I have a problem while displaying total no of pages in Smartform.
When no of pages are more than 10 then in total no of pages , a * is shown till current page is 9, then after it is displaying correct no of pages.
I am using &sfsy-formpages& to get total no of pages.
Ex: Like if I have 12 pages to print then i am getting 1/, 2/, 3/* .......... 9/* then 10/12 , 11/12, 12/12.
Do i have to write some code for that ?? Please give your inputs to get the total no of pages.
Thanks !

Hi,
Try this.
Page &SFSY-PAGE& of &SFSY-FORMPAGES(4ZC)&
Thanks,
Anitha A

Problem in displaying totals based on the Unit of measurement.

Hi,
I have Problem in displaying totals based on the Unit of measurement.
I want to display the total in the output of the alv based on the unit of measurement. for example i have three fields in the output namely
Matnr           Quantity      UOM
51                10              EA
61                10              KG
71                10              KG
In the total i should get
                10         EA
                20         KG
Can anyone tell me how to do this?
The basic req is the exclude the qty with unit EA(each) in the totals.
Thanks,
Amit

H i,
you can use the collect statement
to get the proper result
loop at itab. ( all the records)
move all the fields from itab to another
collect itab1.
write: itab1-fields, itab1-fields.
endloop.
this will solve your problem
reward points if helpful,
thanks & regards,
venkatesh

Total on First Line in ALV...........

Hi Experts,
I was written a ALV report and it works fine but the user want the total should be appear on first line.
How to bring All Totals on First Line in ALV default...?
Thanks,
Yusuf

Hi,
Use do_sum in the field catlog .
For displaying the summ u want for the field, Use do_sum.
Regards,
Jagadish

Display totals with currency sign in ALV

Hi,
I have to display totals with currency sign in ALV.
column1      colums2
10               USD
20               USD
30               USD
40               USD
100            USD
Can anybody help on this.
Regsrds,
Zak.

Hi,
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
fieldcatalog-datatype     = 'CURR'. "
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
Thanks
Vikranth

How to insert horizontal lines in alv report?

hi,
    i have to insert horizontal lines in alv report.( RM07MLBB )
        actually my requirement is:
                           basis list = RM07MLBB.
first secondary list = another report is called here ( RM07DOCS )
                  i want to insert horizontal lines in the first secondary list, when i execute individually RM07DOCS , i can get horizontal lines, but when i dounle click in the basic list --> in the first secondary list , i am not getting the horizontal lnes.
functional modules used are REUSE_ALV_HIERSEQ_LIST_DISPLAY & REUSE_ALV_GRID_DISPLAY.
    here in this program,
                    is_layout = alv_layout.
hence i tried to give
              alv_layout-no_hline = ' '.
but not effecting.
          can some one please tell me , how to insert lines in the alv report.
thanks in advance,
Dastagir.

hello,
     so i cannot insert horizontal lines in the first secondary list according to my sorting condition, i.e., in a single block there should be :
       if same delivery challan number is repeating they should come in the same block,
for the corresponding delivery challen number, if have po number, is repeating , they also should come in the same block.
                   in this way i have to seperate the blocks containing EXNUM , EBELN CONDITIONED.

Display Currency symbol with value in ALV Report

Hi Experts,
I need to display currency symbol with value in ALV Report like if currency type is dollar then $200.
Here I am using field catalog type slis_t_fieldcat_alv and suing field merge catalog FM: 'REUSE_ALV_FIELDCATALOG_MERGE'
I tried like this
    IF <fs_fieldcat>-fieldname = 'STPRS'.
      <fs_fieldcat>-seltext_s = 'Std Cost '.
      <fs_fieldcat>-seltext_m = 'Std Cost'.
      <fs_fieldcat>-seltext_l = 'Std Cost '
       <fs_fieldcat>-tabname = 'MBEW'.
      <fs_fieldcat>-ctabname = 'T001'.
      <fs_fieldcat>-cfieldname ='WAERS'.
      <fs_fieldcat>-datatype = 'CURR'.
    ENDIF.
Please any one can suggest the solution for this.
Advance Thanks.
Regards,
Bala Achari

Hİ,
Check this link.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=24379571
Take care.
Çağatay

How to display subtotals in separate column in alv report?

hi,
I am displayed the subtotals for QUantity field BDMNG in Reuse_alv_grid_display in the same column.
but I want to display subtotal in separate column.
How to display subtotals in separate column in alv report?
thanks&regards.
samba.k

Hi
As far as i know you can't do this,the option you have is to create one more column (subtotal) and populate it by manual calculation at every subtotal (not alv subtotal but yours) .
Best Regards
Yossi

Problem in displaying total quantity

For VA02 Transaction:
When order contains 1 line item it is displaying fine. If order contains more line items total quantity of line items is not displaying, previously itu2019s working fine. I written perform at Item_line element to display line items and I written perform at Item_sum element to display the total quantity. (in debugging for one item 2 elements are triggering , when more line items item_sum element is not triggering).
Please can u help me to display total quantity. And why item_sum element is not triggering.
Thanks & Regards,
Raj

Hi,
you meant, its not displaying the correct value or it is not at all printing any value in total when u have multiple line items.
could you paste the code for this part...
Rgds,
Pavan

How to display total for a column in updateble report

How can I display total on a report column?
the query is
select htmldb_item.checkbox(1,invoice_id) invoice_id,
htmldb_item.DISPLAY_AND_SAVE(2,invoice_no,15)invoice_no,
htmldb_item.DISPLAY_AND_SAVE(3,to_char(invoice_date, 'DD-MON-YYYY'),20) invoice_date,
htmldb_item.DISPLAY_AND_SAVE(4,net_amount,15) NET_AMOUNT,
htmldb_item.text(5,net_amount,null,10) amount_adj,
htmldb_item.text(6,net_amount,null,10) actual_amt
from INVOICE
where OWNER_TYPE = 'CUSTOMER'
and OWNER_ID = :P57_CUSTOMER_NAME
group by invoice_id,invoice_no, invoice_date,net_amount
In the report column attributes the sum column is checked for the sal field
When I run the report, I get a Sub-total of 0 and a Report Total of 0. What am I doing wrong?
thanks

Sunil,
Which column is the sal column? I canât see any numeric columns in your query. If you use htmldb_item calls in your query column, then this makes them strings and you canât build sums on string columns. If you want to build sums in an updateable report / tabular form, then donât use the htmldb_item API. Instead use the built-in display types on the report column attributes page. Using the built-in display types is the better options in most cases anyway and they do allow you to calculate sums even if the column is a text field or display and save type field.
Regards,
Marc

Field description in two line in ALV report

Hi ,
In ALV report I want the description for each field to be displayed in two lines . For example
the description for field matnr is " Material No for grade A " which is displayed in one line . But i want to display it as : Material No
for grade A
in two lines . Is it possible . Please help me out .
Neetesh

Hi Neetesh,
Its not possible to display as you like in 2 lines header for single column. But i can provide the alternative way , it won't good logically. Please try the following logic.
Let suppose you have 10 fields F1-f10. Each field has the 2 lines header. So take 20fields in your fields catalog ie take 10 dummy fields which are equal lenght of the fields F1-f10. and for the last 10 fields(F11-F20) set the row pos as 2, set the second line header to these field(F11-F20). So you will succed to display the 2 level header for single column. But the problem here is you will get one empty row additional row for each row. Because you have taken (F11-F20) fields are dummy and don't have the data also. This solution will works only in the case of ALV List display not in Grid Display.
But Before that tell to your customer about this problem , Because I have done the same things when my customer giving important to 2 lines header and he accepeted that also.
If suppose you have the data in 2 lines for each column then this solution will work fine. Thats what i implemented in my ALV Report.
Warm Regards,
Vijay.

How to select multiple lines in ALV report

hi gurus,
I am working on an interactive ALV report where i have to select multiple lines from the basic list into an internal table, based on check box clicks. Using RS_SELFIELD i can select only 1 row. The coding has been done based on Call Function. Can u please suggest some way.
Regards,
Satyajit

hi,
try like this
TABLES:     ekko.
TYPE-POOLS: slis.                                 "ALV Declarations
TYPES: BEGIN OF t_ekko,
sel,                         "stores which row user has selected
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      fieldcatalog1 TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      gd_tab_group TYPE slis_t_sp_group_alv,
      gd_layout    TYPE slis_layout_alv,
      gd_repid     LIKE sy-repid.
DATA : BEGIN OF det_tab OCCURS 0,
        ebeln LIKE ekpo-ebeln,
       END OF det_tab.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
fieldcatalog-datatype     = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
FORM build_layout.
gd_layout-box_fieldname     = 'SEL'.
"set field name to store row selection
gd_layout-edit              = 'X'. "makes whole ALV table editable
gd_layout-zebra             = 'X'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = gd_repid
      i_callback_user_command = 'USER_COMMAND'
      i_callback_pf_status_set = 'SET_STAT'
      is_layout                = gd_layout
      it_fieldcat              = fieldcatalog[]
      i_save                   = 'X'
    TABLES
      t_outtab                 = it_ekko
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
   UP TO 10 ROWS
    FROM ekpo
    INTO CORRESPONDING FIELDS OF TABLE it_ekko.
ENDFORM.                    " DATA_RETRIEVAL
*       FORM USER_COMMAND                                          *
*       --> R_UCOMM                                                *
*       --> RS_SELFIELD                                            *
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
* Check function code
CASE r_ucomm.
    WHEN '&IC1'.
      IF rs_selfield-fieldname = 'EBELN'.
        READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
        SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
        CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
      ENDIF.
    WHEN 'DET'. "button add by me
      CLEAR det_tab.
      REFRESH det_tab.
      LOOP AT it_ekko INTO wa_ekko WHERE sel = 'X'.
        MOVE-CORRESPONDING wa_ekko TO det_tab.
        APPEND det_tab.
      ENDLOOP.
      PERFORM build_cat.
      PERFORM dis_data.
ENDCASE.
ENDFORM.                    "user_command
*&      Form set_stat
*       text
*      -->RT_EXTAB   text
FORM set_stat USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTAT' EXCLUDING rt_extab.
ENDFORM.                    "set_stat
*&      Form build_cat
*       text
FORM build_cat.
CLEAR fieldcatalog1.
REFRESH fieldcatalog1.
fieldcatalog1-fieldname = 'EBELN'.
fieldcatalog1-tabname = 'DET_TAB'.
fieldcatalog1-seltext_m = 'Order No.'.
fieldcatalog1-outputlen = 10.
APPEND fieldcatalog1 TO fieldcatalog1.
CLEAR fieldcatalog1.
ENDFORM.                    "build_cat
*&      Form dis_data
*       text
FORM dis_data.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = 'ZTEST_DS'
      it_fieldcat        = fieldcatalog1[]
      i_save             = 'X'
    TABLES
      t_outtab           = det_tab.
ENDFORM.                    "dis_data
here i have copied standard gui status of ALV into my z status ZSTAT and add one button DET......
here u can select morethan one line using control(ctrl)
reward if usefull...

SSRS - Is there a multi thread safe way of displaying information from a DataSet in a Report Header?

In order to dynamically display data in the Report Header based in the current record of the Dataset, we started using Shared Variables, we initially used ReportItems!SomeTextbox.Value, but we noticed that when SomeTextbox was not rendered in the body
(usually because a comment section grow to occupy most of the page if not more than one page), then the ReportItem printed a blank/null value.
So, a method was defined in the Code section of the report that would set the value to the shared variable:
public shared Params as String
public shared Function SetValues(Param as String ) as String
Params = Param
Return Params
End Function
Which would be called in the detail section of the tablix, then in the header a textbox would hold the following expression:
=Code.Params
This worked beautifully since, it now didn't mattered that the body section didn't had the SetValues call, the variable persited and the Header displayed the correct value. Our problem now is that when the report is being called in different threads with
different data, the variable being shared/static gets modified by all the reports being run at the same time.
So far I've tried several things:
- The variables need to be shared, otherwise the value set in the Body can't be seen by the header.
- Using Hashtables behaves exactly like the ReportItem option.
- Using a C# DLL with non static variables to take care of this, didn't work because apparently when the DLL is being called by the Body generates a different instance of the DLL than when it's called from the header.
So is there a way to deal with this issue in a multi thread safe way?
Thanks in advance!

Hi Angel,
Per my understanding that you want to dynamic display the group data in the report header, you have set page break based on the group, so when click to the next page, the report hearder will change according to the value in the group, when you are using
the shared variables you got the multiple thread safe problem, right?
I have tested on my local environment and can reproduce the issue, according to the multiple safe problem the better way is to use the harshtable behaves in the custom code, you have mentioned that you have tryied touse the harshtable but finally got
the same result as using the ReportItem!TextBox.Value, the problem can be cuased by the logic of the code that not works fine.
Please reference to the custom code below which works fine and can get all the expect value display on every page:
Shared ht As System.Collections.Hashtable = New System.Collections.Hashtable
Public Function SetGroupHeader( ByVal group As Object _
,ByRef groupName As String _
,ByRef userID As String) As String
Dim key As String = groupName & userID
If Not group Is Nothing Then
Dim g As String = CType(group, String)
If Not (ht.ContainsKey(key)) Then
' must be the first pass so set the current group to group
ht.Add(key, g)
Else
If Not (ht(key).Equals(g)) Then
ht(key) = g
End If
End If
End If
Return ht(key)
End Function
Using this exprssion in the textbox of the reportheader:
=Code.SetGroupHeader(ReportItems!Language.Value,"GroupName", User!UserID)
Links belowe about the hashtable and the mutiple threads safe problem for your reference:
http://stackoverflow.com/questions/2067537/ssrs-code-shared-variables-and-simultaneous-report-execution
http://sqlserverbiblog.wordpress.com/2011/10/10/using-custom-code-functions-in-reporting-services-reports/
If you still have any problem, please feel free to ask.
Regards
Vicky Liu

Problem in displaying Total No.of Lines in ALV report header.

Similar Messages

Maybe you are looking for