Problem in Form builder when calling layout tabstrip

Hello @all,
The last days all work great, but since today when i call the layout tabstrip in transaction. There comes the error message popup :
Adobe LiveCycle Designer ES has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Signature AppName: formde~1.exe AppVer: 8.2.3.4195 ModName: mfc80u.dll
ModVer: 8.0.50727.4053 Offset: 0002ed52.
I dont know, why i hab this problem now.
i have reinstall SAP Gui , but the problem still exists. It also give a short dump message type X
Why do I have the problem, although everything worked all the time wonderfully,
Can anybody helps?
Regards

Hello Christoper,
I'm experiencing the same problem when displaying the Layout in the Form Builder, it was working fine until today. The error message is similar to what you have reported. I wonder how you fix it, appreciate if you could share your resolution, thank you..
Below are the message I got:
Error Message:
Adobe LiveCycle Designer has encountered a problem and needs to close. We are sorry for the inconvenience.
AppName: formde~1.exe AppVer: 7.1.5020.1 ModName: mfc71u.dll
ModVer: 7.10.3077.0 Offset: 0002dc12
Another popup message after the above error:
FORMDE~1.EXE - Application Error
The instruction at "0x01684ce4" referenced memory at "0x03c00b08". the memory could not be "written"...
Rgds, WH

Similar Messages

Problem in Form builder

Hello Experts,
i have the problem when i drag and drop some elements in the form builder, i often get a short dump and the connection breaks.
Then i have to restart sfp.
Maybe I installed an old version of Adobe Life Cycle Designer on my system.
Can anybody helps?
Regards

I have installed LCD 8.0 how its described here. Note 1121176 - Adobe LiveCycle Designer 8.0 - Installation
I installed 8.0 because the sap kernel is sap release 7.0
But i have the same problem. When i start lcd with sfp and switch to layout. There comes the popup with the message Adobe LiveCycle Designer has encountered a problem and needs to close. We are sorry for the inconvenience. When i close this popup with 'dont send', the application terminates.
However the problem still exist .
What can i do.
Regards

Locking problem in Forms Builder 6i, Oracle 9i

It appears that forms builder is issuing exclusive locks on referenced DB objects during and after compilation. This causes problems when trying to issue DDL statements against these objects while builder is connected. Is this the proper lock mode or a known bug? Anyway to control locking by forms builder?

What is the version of your database?<br><br>
Is this the same problem:<br><br>
Compiling a form creates locks?

Problem in form builder connecting to db

Im very new to oracle technology, I have just installed oracle appdeveloper 9i and im trying to use form builder. When I try to log into my database which is also under a 9i personal database, it gives me the error "ORA-12154 TNS:could not resolve service name". I tryed to search for something on oracles site and also the forums but didnt find anything. I had problems installing developer suite but was solved in another form. I had to install it under oracle homes in c:\oracle. my database is installed also under oracle homes c:\oracle\ora92. I checked and made sure that all the services listed under services on windows xp service manager were running, and I still got the error. Please help me, I need this to work for class.
Thanks in advance

I tried to change the MW (which is the name of my database, to ora92 but then i couldnt connect to sql+, I did change the host to local host though.
this is what my file currently reads:
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
MW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = )
(SERVICE_NAME = ORA92)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)

Called form crashes, when called with default option

Here is the problem statement.
My problem is regarding the called_form built-in function of Oracle forms.
I am calling call_form within a loop.
call_form('schdule_task');
In first iteration it opens the called form and when the user clicks on exit button it comes back to the calling form and starts next iteration.But in next iteration the called form comes up and crashes immediately, causing the application to crash.
The calling form does not get a chance to become visible because by default call_form executes with 'HIDE'(hide the calling form) option.
Now if I execute the above mentioned call_form statement with "NO_HIDE" option then the called form does not crash in any of the iteration and the loop runs fine till the end.
call_form('schdule_task',NO_HIDE);
What can be the problem? Is it related to call_form call or something else?

Here is the problem statement.
My problem is regarding the called_form built-in function of Oracle forms.
I am calling call_form within a loop.
call_form('schdule_task');
In first iteration it opens the called form and when the user clicks on exit button it comes back to the calling form and starts next iteration.But in next iteration the called form comes up and crashes immediately, causing the application to crash.
The calling form does not get a chance to become visible because by default call_form executes with 'HIDE'(hide the calling form) option.
Now if I execute the above mentioned call_form statement with "NO_HIDE" option then the called form does not crash in any of the iteration and the loop runs fine till the end.
call_form('schdule_task',NO_HIDE);
What can be the problem? Is it related to call_form call or something else?

Form exits when calling another form

I have a form that passes parameters to another form. When creating new records and then calling the other form, it works fine. However, when coming from a post query and then passes parameters to a new form, the form exits upon calling of the other form. What causes this? Thanks for your help. I am using Forms Developer 6.0
Edited by: user6656248 on Apr 14, 2009 8:30 PM

My form is intermittent, when creating new records, sometimes the other form is called and parameters are passed but sometimes nothing happens and there are no errors. But from post query, calling another form and passing parameters exits the calling form and the called form does not show up. This form calls another form and passes some parameters without problems but when I tried to call another one, those scenarios happen. I am confused because the codes on both my When-Button-Pressed trigger are 100% similar. I dont know why this happens on this one and NEVER on the other. I hope you understand my query. Thanks a lot for responding. Please help.
Here is my code:
DECLARE
form_id      FormModule;
pl_id      paramlist;
pl_name      varchar2(1000);
it_id      Item;
BEGIN
pl_name := 'temp';
pl_id      := get_parameter_list(pl_name);
     IF NOT ID_NULL(pl_id) THEN
     destroy_parameter_list(pl_id);
     END IF;
pl_id := create_parameter_list(pl_name);
add_parameter(pl_id,'L_OUT_DATE',TEXT_PARAMETER,TO_CHAR(:DAILY_OUTS.OUT_DATE,'DD-MON-RRRR HH24:MI:SS'));
add_parameter(pl_id,'L_DATE_IN',TEXT_PARAMETER,TO_CHAR(:DAILY_OUTS.DATE_IN,'DD-MON-RRRR HH24:MI:SS'));
     add_parameter(pl_id,'L_SUBSTATION_CODE',TEXT_PARAMETER,:DAILY_OUTS.SUBSTATION_CODE);
     add_parameter(pl_id,'L_BREAKER_CODE',TEXT_PARAMETER,:DAILY_OUTS.BREAKER_CODE);
     add_parameter(pl_id,'L_CIRCUIT_CODE',TEXT_PARAMETER,:DAILY_OUTS.CIRCUIT_CODE);
     add_parameter(pl_id,'L_REMARKS',TEXT_PARAMETER,:DAILY_OUTS.REMARKS);
     add_parameter(pl_id,'L_FREQUENCY',TEXT_PARAMETER,:DAILY_OUTS.FREQUENCY);
     add_parameter(pl_id,'L_OUTAGE_CODE',TEXT_PARAMETER,:DAILY_OUTS.OUTAGE_CODE);
     add_parameter(pl_id,'L_OUTAGE_SUBCODE',TEXT_PARAMETER,:DAILY_OUTS.OUTAGE_SUBCODE);
     add_parameter(pl_id,'L_WEEK_NO',TEXT_PARAMETER,:DAILY_OUTS.WEEK_NO);
     add_parameter(pl_id,'L_RADIO_GRP',TEXT_PARAMETER,:DAILY_OUTS.NEW_OUTAGE_GRP);
     add_parameter(pl_id,'L_RELAYS_ACT',TEXT_PARAMETER,:DAILY_OUTS.RELAYS_ACT);
     add_parameter(pl_id,'L_TRIP_CAUSED_BY',TEXT_PARAMETER,:DAILY_OUTS.TRIP_CAUSED_BY);
     add_parameterr(pl_id,'L_SCODE_TRIP_CAUSED_BY',TEXT_PARAMETER,:DAILY_OUTS.SC_CAUSED_BY);
     add_parameter(pl_id,'L_ACTION_TAKEN',TEXT_PARAMETER,:DAILY_OUTS.MEASURE);
:GLOBAL.BC := 1;
IF :daily_outs.out_date > sysdate +1 then
     MESSAGE('DATE/TIME-OUT IS GREATER THAN SYSTEM DATE. PLEASE CHECK AND ENTER NEW
DATE/TIME-OUT VALUE.', acknowledge);
     MESSAGE('DATE/TIME-OUT IS GREATER THAN SYSTEM DATE. PLEASE CHECK AND ENTER NEW
DATE/TIME-OUT VALUE.', acknowledge);
     RAISE Form_Trigger_Failure;
END IF;
IF :daily_outs.date_in IS NOT NULL AND :daily_outs.out_date IS NOT NULL THEN
     IF (:daily_outs.date_in - :daily_outs.out_date) <= 0 then
MESSAGE('DATE/TIME-IN IS LESS THAN OR EQUAL TO DATE/TIME-OUT. PLEASE ENTER NEW
DATE/TIME-IN VALUE.', acknowledge);
RAISE Form_Trigger_Failure;
END IF;
END IF;
OPEN_FORM('FRMSPM_DAILY_BRKRS_PARAM', ACTIVATE, NO_SESSION, SHARE_LIBRARY_DATA, pl_id);
END;

Memory leak and problem with polymorh vi when calling vi from dll

Two problems appear for me when using the setup below.
First, I have a vi for opening a secondary vi:
Then I have a vi for calling the opened, secondary vi:
These two are compiled to a dll. The first one is called once, calling a function "open(char *)". The second one is called over and over, calling a function nextevent(double *, int). A simple example of an opened, secondary vi looks like this:
The code used to send data looks approximately like this:
dataout = malloc(dx->numelems * sizeof(double));
datain = (COMPLEX *) dx->cont;
for (i = 0; i < dx->numelems; ++i)
dataout[cnt][i] = sqrt(datain[i].re * datain[i].re + datain[i].im * datain[i].im);
nextevent(dataout, dx->numelems);
free(dataout);
This code is called in a loop. dataout is a double array to be sent to the secondary vi, datain is the source data.
The problem now is that there is something eating up memory, and I fail to see why.
My second question is this:
I want to insert a Hamming window, or some other form of windowing function. It doesn't work however, and the help tells me it is because a vi opened this way cannot contain any polymorphic vi. Is there a convenient way around this problem?
Lars Melander
Uppsala Database Laboratory, Uppsala University

Regarding your second question:
As you say not possible to use a polymorphic vi in a DLL and in your case it is the windowing VI that is polymorphic. What you can do is to use only one instance of the windowing VI in the short cut menu.
Here is a link to a report about this error in the knowledgeBase:
http://digital.ni.com/public.nsf/allkb/755CE99505A1C9FF8625693C00508DDE?OpenDocument

Locking Problem with Forms Builder 6i/Oracle 9i

It appears that when form builder has a form open, all of the objects in the form are locked exclusively. This is causing loads of problems when trying to alter objects. Runtime doesn't seem to have this problem. Is this a known bug or is there a way to keep builder from obtaining exclusive locks.

We have the same problem. It seems that if we use drop and create and not create or replace statments we don't get the locks. This is not a solution but perhaps a workaround.
We tried to upgrade the database to 9.0.1.3.1 but that didn't help.

Netscape 7 replaces form window when calling reports

Netscape 7.0, unlike Netscape 4.7 does not handle forms application that calls on Reports to display Report preview in PDF.
When our forms call reports to display a report to the user in the browser, the window on which the form screen is presented is replaced by the window which brings up adobe reader to display the report.
IE 5.5, Netscape 4.7 work fine.
Is there a configuration which must be set in Netscape or in the forms code to direct the browser to open a separate window to receive reports output?

Lawrence,
try calling it
web.show_document('<URL'>,_blank);
This should do it. In Forms9i this built-in is able to call out to javascript, giving you even more control over the window you use it in.
Frank

Problem with special characters when calling web services via ISG

Hi all,
I have a problem when trying to send or retrieve strings containing some special characters via Integrated SOA Gateway.
For example, when I call a PL/SQL function via ISG that returns a string containing curling single and double quote characters, these are not represented by valid XML character entity references. So when trying to open the response XML (returned by ISG) in a browser, I get a parser error...
Has anybody had a similar experience with ISG? How can I resolve that - is it an ISG bug?
Thanks
Carolin

XML Parsing Error: not well-formed
Location: file:///C:/Users/sanders/Desktop/Text3.xml
Line Number 4734, Column 54: <DESCRIPTION>Overhead Track Lighting 4?</DESCRIPTION>Do you get the same error if you change the description from "Overhead Track Lighting 4?" to "Overhead Track Lighting 4"?
Do you have any invalid characters?
BI Publisher Reports End With Error When There Is An Ampersand Character ( & ) On The Xml Data File [ID 1081175.1]
Journal Entries Report Doesn'T Yield Output: Java Heap Error [ID 1115663.1]
Thanks,
Hussein

Problem in ESS Build when creating the project "Import can't be resolved"

Hi All,
we are using ESS and MSS 600 for ERP 2005 and EP 7.0.
Once the cms INBOX components are imported to Development, I have started my development.
In the Build process, when I am trying to create the Project for ess/us/bank inactive DC,
It says: "Build with warnings"
It is showing the couple of warning in General User Output as:
Warning: Source folder "META-INF" does not exist and will be ignored.
WARNING: No reference entry for runtime dependency on component "ess/per" (vendor "sap.com")
WARNING: No reference entry for runtime dependency on component "ess/xx" (vendor "sap.com")
WARNING: No reference entry for runtime dependency on component "ess/xx/bank" (vendor "sap.com")
WARNING: No reference entry for runtime dependency on component "pcui_gp/xssfpm" (vendor "sap.com")
WARNING: No reference entry for runtime dependency on component "pcui_gp/xssutils" (vendor "sap.com")
When I open the project in "Web Dynpro" perspective and look at the implementation of any View ... I see the error at import statement:
import com.sap.xss.hr.per.us.bank.detail.wdp.IPrivateDetailView; (For Detail View)
It says : The import "com.sap.xss.hr.per.us.bank.detail.wdp" can't be resolved
How should I proceed?? I verified for other components as well and getting these import error:
I looked in the package folder and there is no folder with the name "wdp" in "com.sap.xss.hr.per.us.bank.detail"
Can some one please help me on this. Highest points would be rewarded If i could solve the problem.
I have followed "JDI Cook BOOK" for creating tracks and imports. In the "NWDI COOKBOOK" it also says to include "EP BUILD TOOL" apart from "DI BUILD TOOL" for the build time dependency of a component. But i couldn't find "EP BUILD TOOL" any where else, is this causing all this mess? When I look at my build time dependencies for SAP_ESS and SAP_MSS it has got :
SAP_JEE
SAPPCUI_GP
SAP_BUILDT
SAP_JTECHS
I think this should do, Please some one help me.
Thanks,
Hari.

Hi purav,
Try closing the nwds and open it again, if problem not solved then from your .dtc try to find that file which is missing and add in bulidpath and compile.
Thanks,
pkv

Problem with Transaction iView when calling R/3(Personalization)

Hi
I have created several Transaction iViews , where I am calling different Backend Systems like R/3 , BW, etc.
My problem is , when I launch the iView, I can able to see the SAP Easy Access for R/3 , BW etc. But the language that user have in the backend is over writed by English.
In the iView properties, I have not selected any language.
In the Portal Personalization /UME also I have not selected any language.
But in R/3 I have selected "de" as my language but the R/3 SAP Easy Access showing only English.
Any advice please? should we have any settings in the portal without touching iview properties or portal personalization to view the backend GUI in the same language that is set in the backend profile?
Thanks in advance.

Hi,
The following way might help you.
Go to Internet web browser, select Tools in the menu, then select Internet options --> General Tab --> Languages --> Add --> German(de) . finally move up the German(de)
Deep

Problem with BAPI BAPI_MATERIAL_SAVEDATA when calling from other system

Hi All,
I able create new material using the BAPI BAPI_MATERIAL_SAVEDATA in development system.
but when i am calling this BAPI from other systems by passing the same values that i used in the development system . system is giving me an error ( in the return statement) saying that material number doesn't exists .
Can any one have some pointers towards this ?
Thanks & Regards,
Praveen

Hi,
this FM BAPI_MATERIAL_SAVEDATA
is used to extend a material to another plant
for that you need to read the original data via BAPI_MATERIAL_GET_DETAIL and then select additional data from MKVE and save it via BAPI_MATERIAL_SAVEDATA with table parameter SALESDATA
also check with
BAPI_STANDARDMATERIAL_CREATE Create/Extend Material
BAPI_MATERIAL_SAVEDATA - QM - Inspection Setup
Problem in BAPI_MATERIAL_SAVEDATA
Thanks&Regards,
Naresh

Please resolve this problem In form builder help

Hi everybody,
why i am not able to get good books on forms when compared to others design tools. I strongly believe that this is the disadvantage most people face while trying to learn oracle forms, one fact is that when compared to oracle forms,designer tools related to other technologies i find many number of books by many authors. It is very hard to find books on forms. somebody suggested to go to amazon.com , i hardly found 5 books, in which advanced forms and report by oracle press is good. I am not able to get books which explain each every property in from builder in illustrative mannaer. Can't we find that in any books ? somebody suggested oracle documentation, i gone through reference manual, its very helpful, but there is not illustrative examples in that also. I want specifically, HANDS-ON-EXPERIENCE step by step, can't we find such books on forms. It is happy to know that in oracle documentation, on reports, we have BUILDING REPORTS document. It's explain each and every aspects step by step. Why can't forms documentation management poeple do that regarding forms, like "BUILDING FORMS"
any restrinction on doingthis ? The most complaint people do is they are not find enough oracle developers, the reason might be most of the developes did'nt find any good books on oracle forms... i posted many times, no satisfied reply ...
please suggest,
waiting for forms management reply
prasanth

Hi
i think you can find the book you are looking at Oracle university.
it has great details and teaches you step by step on how to install start and configure system variables to develope and deploy forms on the web and client/server.
Regards
Tony G.

My iPhone 4 is out of warranty however I have always had problems getting cut off when calling and bad reception my provider has proved that their network is stable and suggested I contact apple

I have always had problems with my iPhone O2 network
It has always cut calls in the middle of conversations and reception has never being good
I spoke to O2 and have had new sim cards which have not helped
Any ideas

GregMayne wrote:
i figure it is the logic board. and no it has never been changed. yes i have the box, the code. i keep everything for situations just like these and somehow they still try to **** me over.
Do this.
Go to the Apple Support page and type in your serial number. When the screen comes up showing that Serial number having Applecare extended warranty take a screen shot of it or Print it out to a PDF file and then Print a Hard Copy of either of those things. Take that with you when you take your Mac in to be looked at.
Good Luck with the Lenovo. I hear they are the same quality as when IBM was making them. Personally I have always used Dell Business Class notebooks and have never had any problems with them. Still have one that is going on 11 years old and it still runs as good as the day I bought it, actually a little better because I've upgrade the CPU, GPU. RAM and HDD.

Problem in Form builder when calling layout tabstrip

Similar Messages

Maybe you are looking for