Problem with Transaction iView when calling R/3(Personalization)
Hi
I have created several Transaction iViews , where I am calling different Backend Systems like R/3 , BW, etc.
My problem is , when I launch the iView, I can able to see the SAP Easy Access for R/3 , BW etc. But the language that user have in the backend is over writed by English.
In the iView properties, I have not selected any language.
In the Portal Personalization /UME also I have not selected any language.
But in R/3 I have selected "de" as my language but the R/3 SAP Easy Access showing only English.
Any advice please? should we have any settings in the portal without touching iview properties or portal personalization to view the backend GUI in the same language that is set in the backend profile?
Thanks in advance.
Hi,
The following way might help you.
Go to Internet web browser, select Tools in the menu, then select Internet options --> General Tab --> Languages --> Add --> German(de) . finally move up the German(de)
Deep
Similar Messages
-
Problem with redirect script when calling from external - UCCX
Hi,
I have a problem with external calls not being redirected when the call comes from an external that begins with a certain prefix on teh ANI.
The call path goes PSTN - VGW - UCM SUB - UCCX.
To give you info this should be redirected to a auto attendant on unity but it just hits the fourth option unsuccessful.
If i change it to match an internal ANI and test it works.
What trace and log do i look at to see the call coming in from the UCM and what is happening with it why this is failing when it trys to redirect a call coming from external?
I have also attached my script.
Thanks for the help.
KevHi Martin Braun,
Go to GUI status which you set in the PBO of your screen,
and open "Function Keys" part.
You should have set function key F4 for a button on your GUI status,
delete this button and create with another function key again.
I hope it helps. -
Problem with output data when calling into Oracle stored procedure
I have a problem that I think I've seen posted by others, but I can't find it anywhere on the forum. Here's what it looks like:
I have a application that sends a query parameter called custID in a URL to a JSP page.
http://domain.com/decrypt.jsp?custID=ewsw
The JSP subsequently calls into the method below to run a decryption stored procedure on an Oracle db. The custId parameter works fine from most clients. However, I have seen the decryption stored procedure return invalid information on some clients in the following case:
http://domain.com/decrypt.jsp?custID='eirwx
Here is how I define my call to the DCUSTID (decryption stored procedure):
public long dCustID(String sCustID)throws SQLException {
CallableStatement cs = null;
try {
long nCustID = 0;
if(conn == null || conn.isClosed()) {getLocalConnection();}
String sp = "BEGIN DCUSTID(?,?);END;";
cs = conn.prepareCall(sp);
cs.setString(1, sCustID);
cs.registerOutParameter(2,java.sql.Types.NUMERIC);
cs.execute();
nCustID = cs.getLong(2);
return nCustID;
}finally { release(cs); }
I have not been able to find a problem with the stored procedure (although Im not counting that out). Is there any way that the jsp or the code above is corrupting the data before it gets to the stored procedure? I'm very suspicious of the single quote at the begining of the custID query string parameter.
Thanks>
The JSP subsequently calls into the method below to
run a decryption stored procedure on an Oracle db.
The custId parameter works fine from most clients.
However, I have seen the decryption stored procedure
e return invalid information on some clients in the
following case:
The back tick doesn't matter.
How do you know that the routine that you posted returns invalid information? Are you printing the value retreived before you return in the code that you posted? That is the only way to tell if that code is the problem vs some translation problem in something else.
And what do you mean by 'invalid'? It does return a numeric value right? Is it negative? Or so large that it couldn't be a key? Or what?
The input parameter to the stored proc is a varchar and not a char correct? -
Problem with transaction iview
Whenever I access a transaction iView I get a blank bowser page saying Action Cancel.
Can you post more details Miller?
Is it something new u have started seeing?
Is everything perfect like Alias and stuff?
Post back with more details.
Regards,
P -
Memory leak and problem with polymorh vi when calling vi from dll
Two problems appear for me when using the setup below.
First, I have a vi for opening a secondary vi:
Then I have a vi for calling the opened, secondary vi:
These two are compiled to a dll. The first one is called once, calling a function "open(char *)". The second one is called over and over, calling a function nextevent(double *, int). A simple example of an opened, secondary vi looks like this:
The code used to send data looks approximately like this:
dataout = malloc(dx->numelems * sizeof(double));
datain = (COMPLEX *) dx->cont;
for (i = 0; i < dx->numelems; ++i)
dataout[cnt][i] = sqrt(datain[i].re * datain[i].re + datain[i].im * datain[i].im);
nextevent(dataout, dx->numelems);
free(dataout);
This code is called in a loop. dataout is a double array to be sent to the secondary vi, datain is the source data.
The problem now is that there is something eating up memory, and I fail to see why.
My second question is this:
I want to insert a Hamming window, or some other form of windowing function. It doesn't work however, and the help tells me it is because a vi opened this way cannot contain any polymorphic vi. Is there a convenient way around this problem?
Lars Melander
Uppsala Database Laboratory, Uppsala UniversityRegarding your second question:
As you say not possible to use a polymorphic vi in a DLL and in your case it is the windowing VI that is polymorphic. What you can do is to use only one instance of the windowing VI in the short cut menu.
Here is a link to a report about this error in the knowledgeBase:
http://digital.ni.com/public.nsf/allkb/755CE99505A1C9FF8625693C00508DDE?OpenDocument -
Problem with special characters when calling web services via ISG
Hi all,
I have a problem when trying to send or retrieve strings containing some special characters via Integrated SOA Gateway.
For example, when I call a PL/SQL function via ISG that returns a string containing curling single and double quote characters, these are not represented by valid XML character entity references. So when trying to open the response XML (returned by ISG) in a browser, I get a parser error...
Has anybody had a similar experience with ISG? How can I resolve that - is it an ISG bug?
Thanks
CarolinXML Parsing Error: not well-formed
Location: file:///C:/Users/sanders/Desktop/Text3.xml
Line Number 4734, Column 54: <DESCRIPTION>Overhead Track Lighting 4?</DESCRIPTION>Do you get the same error if you change the description from "Overhead Track Lighting 4?" to "Overhead Track Lighting 4"?
Do you have any invalid characters?
BI Publisher Reports End With Error When There Is An Ampersand Character ( & ) On The Xml Data File [ID 1081175.1]
Journal Entries Report Doesn'T Yield Output: Java Heap Error [ID 1115663.1]
Thanks,
Hussein -
Problem with BAPI BAPI_MATERIAL_SAVEDATA when calling from other system
Hi All,
I able create new material using the BAPI BAPI_MATERIAL_SAVEDATA in development system.
but when i am calling this BAPI from other systems by passing the same values that i used in the development system . system is giving me an error ( in the return statement) saying that material number doesn't exists .
Can any one have some pointers towards this ?
Thanks & Regards,
PraveenHi,
this FM BAPI_MATERIAL_SAVEDATA
is used to extend a material to another plant
for that you need to read the original data via BAPI_MATERIAL_GET_DETAIL and then select additional data from MKVE and save it via BAPI_MATERIAL_SAVEDATA with table parameter SALESDATA
also check with
BAPI_STANDARDMATERIAL_CREATE Create/Extend Material
BAPI_MATERIAL_SAVEDATA - QM - Inspection Setup
Problem in BAPI_MATERIAL_SAVEDATA
Thanks&Regards,
Naresh -
Problem with array param when calling a webservice from a BPM Process
Hi. I have a web service and uses an array as parameter.
The array (named "atributos") as part of a business object is defined here:
<xs:schema targetNamespace="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/TrackPCPDOTrans" ...>
<xs:complexType name="TrackPCPDOTransType">
<xs:sequence>
<xs:element name=... />
<xs:element name="atributos" nillable="true" type="ns2:AtributosType" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:element name="TrackPCPDOTrans" type="TrackPCPDOTransType"/>
</xs:schema>
<xs:schema targetNamespace=... >
<xs:complexType name="AtributosType">
<xs:sequence>
<xs:element name="key" nillable="true" type="xs:string"/>
<xs:element name="value" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<xs:element name="Atributos" type="AtributosType"/>
</xs:schema>
In the service task activity, I pass the params to the web service:
"descripcion" --> TrackPCPDOTrans.atributos[1].key
DataObject.descripcion --> TrackPCPDOTrans.atributos[1].value
"estado" --> TrackPCPDOTrans.atributos[2].key
DataObject.estado --> TrackPCPDOTrans.atributos[2].value
"justificacion" --> TrackPCPDOTrans.atributos[3].key
DataObject.justificacion --> TrackPCPDOTrans.atributos[3].value
But when I test the process, an error ocurrs:
<auditQueryPayload auditId="8712004" ciKey="380019">
<dataState>
<dataObject name="FaultMessage" isBusinessIndicator="false">
<value> oracle.bpm.bpmn.engine.model.runtime.microinstructions.TrappableException: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} cause: {faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} parts: {{ summary=<summary>empty expression result. The expression bpmn:getDataInput('trackPCPDOTrans')/ns:atributos[2]/ns1:key is empty. An attempt to read or copy data referenced or computed by the XPath expression either had invalid data, according to the XML schema, or did not contain certain optional data. Ensure that the variable or expression result named in the error message is not empty. Enable XML schema validation of related data elements to ensure the run-time data is valid. </summary>} } </value>
</dataObject>
</dataState>
</auditQueryPayload>
What is wrong?
Thanks for your help.I did the assignment in XPATH:
oraext:parseXML(concat('<AtributosTracking xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/AtributosTracking">
<arrayAtributosTracking>
<key xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos">','descripcion','</key>
<value xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos">',bpmn:getDataObject('DataObjectDDSAO')/ns:descripcion,'</value>
</arrayAtributosTracking>
<arrayAtributosTracking>
<key xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos">','estado','</key>
<value xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos">',bpmn:getDataObject('DataObjectDDSAO')/ns:estado,'</value>
</arrayAtributosTracking>
</AtributosTracking>'))
AtributosTracking.xsd:
<?xml version="1.0" encoding="UTF-8"?>
<?bpmo version="11.1.1.6.0.15.53" build="15.53" fullName="DataTypes.AtributosTracking" modifiers="268435456"?>
<xs:schema targetNamespace="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/AtributosTracking" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/AtributosTracking" xmlns:ns1="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos" xmlns:bpmo="http://xmlns.oracle.com/bpm/bpmobject/" >
<xs:import namespace="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos" schemaLocation="Atributos.xsd"/>
<xs:complexType name="AtributosTrackingType">
<xs:sequence>
<xs:element name="arrayAtributosTracking" nillable="true" type="ns1:AtributosType" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:element name="AtributosTracking" type="AtributosTrackingType"/>
Atributos.xsd:
<?xml version="1.0" encoding="UTF-8"?>
<?bpmo version="11.1.1.6.0.15.53" build="15.53" fullName="DataTypes.Atributos" modifiers="0"?>
<xs:schema targetNamespace="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos" xmlns:bpmo="http://xmlns.oracle.com/bpm/bpmobject/" >
<xs:complexType name="AtributosType">
<xs:sequence>
<xs:element name="key" nillable="true" type="xs:string"/>
<xs:element name="value" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<xs:element name="Atributos" type="AtributosType"/>
</xs:schema>
But a new error occurrs when I run the BPM process:
<auditQueryPayload auditId="8724004" ciKey="380025">
<dataState>
<dataObject name="FaultMessage" isBusinessIndicator="false">
<value> oracle.bpm.bpmn.engine.model.runtime.microinstructions.TrappableException:
faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
cause: {faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{ summary=<summary>XPath query string returns multiple nodes.
The assign activity part and query bpmn:getDataObject('AtributosTracking')/ns:atributosTracking are returning multiple nodes.
The assign activity part and query named in the error message returned multiple nodes. It should return single node.
According to BPEL4WS specification 1.1 section 14.3, the assign activity part and query named in the error message should
not return multiple nodes. Verify the part and xpath query named in the error message at line number -1 in the BPEL source. </summary>} } </value>
</dataObject>
</dataState>
</auditQueryPayload>
Any idea?
Thanks
Edited by: César on 10/01/2013 11:02 AM -
I have problem with my mic when i make call the others cannot hear me but the mic is ok
i have problem with my mic when i make call the others cannot hear me but the mic is ok i checked it out and it works dont know what to do help me !!
Hello Sabbir Khan,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Can't hear through the receiver or through speaker, and can't be heard
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Best of luck,
Mario -
I am having a problem with getting notified when I receive a call or a text.
Hi BigBroMAC,
The first thing I would check is Do Not Disturb mode, as this will cause that behavior:
iOS 6: Using Do Not Disturb
http://support.apple.com/kb/HT5463
If that isn't the issue, this article has slightly different symptoms but the troubleshooting would be the same:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Before you do step 10, however, I recommend resetting all settings to see if that helps. To do that, choose Settings > General > Reset > Reset All Settings.
I hope this helps!
- Ari -
Problem with Transaction-Duration Dialog
Hello All,
I wonder if somebody could shed a light on the problem that we're having
with transaction-duration dialog service object. The problem is this.
When we call the service object and its SQL statement fails (for
example, because of constraint violation) Forte raises AbortException.
It also clears the error stack, so we have no way to know what caused
it, original error ("ORA -... Constraint Violation") disappears. All we
get is this:
USER ERROR: Access to a load balanced router member (which is a service
object) failed for the reasons below.
Class: qqsp_AbortTransaction with ReasonCode: SP_ER_USERABORT
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Last TOOL statement: method tester.test, line 3
Error Time: Thu Jul 2 15:56:40
Distributed method called: SO_UmbrellaProxy.testAbortExc (object
name
site/sosa_sampleservice_cl0/th_testabort_cl0-bmso0x15d:0x1) from
partition
"TH_TestAbort_cl0_Client", (partitionId =
DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x2, taskId =
[DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d.4]) in application
"Forte_cl0", pid 74 on node AANANIEV in environment archenv
Originator: SP_AO_XACTMGR
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x1, taskId =
[DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x1.16]) in
application
"Forte_cl0", pid 74 on node AANANIEV in environment archenv.
USER ERROR: Your transaction was aborted
Class: qqsp_AbortTransaction with ReasonCode: SP_ER_USERABORT
Error #: [402, 45]
Detected at: XactMgr.TXAbort at 1
Error Time: Thu Jul 2 15:56:40
Originator: SP_AO_XACTMGR
Exception occurred (remotely) on partition
"TH_TestAbort_cl0_Part1-router", (partitionId =
DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15b:0x9, taskId =
[DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x2.17]) in
application
"TH_TestAbort_cl0", pid 18196 on node hp9000_1 in environment
archenv.
Has anyone experienced this problem with "transaction-duration" service
object? Is there any way to find out the cause of "AbortException"? It
seems impossible to catch the AbortException on the server partition,
looks like Forte exits right away.
Everything works fine with "message-duration" dialog, unfortunately it
is not an option for us because of the way our batch programs were
designed.
Any help is greatly appreciated.
Alexander Ananiev
Claremont Technology Group
916-558-4127
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>thanks Peter for trying to help
ok, i've narrowed down the problem, it seems that when i try and save a file onto one partition of one of my ext drives it won't save to my last save dir but if i save to another partition/drive it works ok, also if i rename the 'dodgy' partition it also seems to work ok, so somehow the name of the drive has become corrupted.
anybody ever heard of this? or how i could fix this as it's a quite annoying because alot of my audio files are referenced on this partition, so itunes or Cubase (audio sequencer) can't find my files now. -
Disable transaction box and menue from wingui with transaction iview
Dear all,
has anyone a solution to disable or hide the menue and transactionfield in a portal transaction iview thats called with wingui.
Webgui is no solution.
Best regards
Thorsten StrackeHi Vineeth and Ramganesan,
thanks for quick response, this will be a option when all clients shoul use this behavior.
I search for a solution, where i can decided in a view to switch it of. Normally i can attach dynpro fields and values with the dynamicparameter, if this can use for hide .. the box or some functions in the gui state.
An other idea is to use a new status for the reports and transactions, but i don't know who use this as parameter.
Best regards
Thorsten -
Problems with color matching when printing...
Hi, I work for a small family business in the P.O.P. industry. We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200. However ever since acquiring the printer we have begun to run into problems with the colors when printing. When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly. However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them. Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints. After I believe 3+ hours of him trying, I was given the original CD and instructed to try. After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly.
We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4. He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it. When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well. My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment. He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all. I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue? I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
Thanks for your timeI've got a few years experience calibrating large format printers. First, the Yellow sounds like a file problem. I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ). I tend to agree with you in that the OS is probably not the problem. But, any Colorburst profiles should remain in the RIP, not in the originator application. My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ). Your partner may be complicating things by incorporating a RIP profile prematurely. If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption. This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings. Start there. You should seriously consider implementing a calibration system if you do not have one already. Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger. It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles. At the very least, match everything that is currently working successfully and put them on both machines. If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert. Hope this helps.
-
How to Call Transaction iView that calls RRMXP from Web Dynpro for ABAP
Dear Experts,,
I'm developing an application in Web Dynpro for ABAP wherein I'm supposed to give a link that should open an SAP Transaction iView that calls tcode = 'RRMXP' and I pass the application parameter as QUERY/WBID = <BI query/Workbook ID>.
I tried calling com.sap.portal.appintegrator.sap.bwc.Transaction iView, but it asks for system/application and GUI type parameters. How to pass through the URL?
Any help would be highly appreciated
Regds,
SriniHi Wolfgang,,
My problem was that I was supposed to call the BeX Web Analyser ( a BI excel based tool - client installation) on click of a button in my WD-ABAP application. I solved it as follows :
In the portal pcd, I cam across a folder content provided by SAP. Here, you'll find standard template iViews that can be used to call applications ( for which you make iViews). I had to call an SAP TCode : RRMXP so as to call a BI Workbook/Query.
So, I called the standard iView template for sap_transaction_iView as follows :
irj/servlet/prt/portal/prtmode/preview/prtroot/'
'pcd!3aportal_content!2fcom.sap.pct!2ftemplates'
'!2fiviews!2fcom.sap.portal.sap_transaction_iview?'
'sap-config-mode=true&System=BWR3System&TCode=RRMXP'
'&GuiType=WinGui&OkCode=y&ApplicationParameter=' <appnm> into url.
l_popup =
l_window_manager->create_external_window( url = url
has_menubar = ' '
has_statusbar = ' '
has_toolbar = ' '
has_location = ' ').
l_popup->open( ).
And , it worked.
Any more help pls feel free to revert.
Regds,
Srini -
Transaction iView always calls SESSION_MANAGER
Hi all,
we are working with Transaction iViews in our portal to call transactions in backend system via ITS.
A few days ago everything worked fine for me, but now the transaction iViews do not call the transaction any more. They just call the start screen (TA SESSION_MANAGER) no matter which transaction should be called.
I compared the iView with the iVews in other EPs, which are working fine. There is no difference.
Even if I create a new transaction iView with the wizard its not working.
Tried to de- and reactivate the webgui service in SICF of backend system but no change.
Has anyone faced similar issues?
Best regards
DavorHi Davor,
You need to check DSM and deactivate in portal.
Please go through thread [Disable DSM Terminator |Re: Disable DSM Terminator;
Regards,
Arun
Maybe you are looking for
-
Respected Gurus Please help!!!! My requirement is , i have one z table in which i am displaying aufnr , matnr , charg , menge. In my ztable the fifth field is to be filled by user.the name of the fifith field is Batch_output.... Now i want if the sum
-
Recieving cannot resolve symbol symbol : class Serializable
I'm receiving the error: cannot resolve symbol symbol : class Serializable The class is as follows: //package cscie160.hw5; import java.io.Serializable * @author Eddie Brodie * @version %I%, %G% public class AccountInfo implements Serializable p
-
Problems Installing Authentication Add-in FMS3
Hi, Im trying to install the "Flash Media Server Authentication Add-in" on my server running Linux. I download the file, execute it but the it just not work. When I tryed on my Windows machine it work perfectly. Any idea? Instruction? Thanks
-
Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment
-
Hi - Below is my original thread with the solution kindly provided by Gordon. Client needs a report for inactive stock - that is any stock that has shown no movement for a certain period in the past (sales orders, deliveries, invoices, credit notes).