Problem in navigating out of the block

Hi,
There is a form created with the help of data block wizard. The form contains 4 data blocks. The entry is to be done in a way that the first threee fields are from the first data bolck and the 4th field is from the next data block. The problem I am facing is that when i try to navigate from the first block to the 2nd block the WHEN-VALIDATE-ITEM trigger of the 4th item of the first block is getting fired, thus preventing me to move to the next block and there are no validation trigger on the block level.
please let me know what the problem can be.
Help is required urgently

Hi,
that's standard behaviour. Item Validation will fire when you change blocks. If validation is successful it shuld not stop you, also you could try using ITEM_IS_VALID which if fiddley way to do it.
If it is possible for you to create a view that combines the columns the two blocks then it would make your data entry easier.
one other option is to fiddle with the validation scope
Easo

Similar Messages

Problem in navigating out of a block

Hi,
There is a form created with the help of data block wizard. The form contains 4 data blocks. The entry is to be done in a way that the first threee fields are from the first data bolck and the 4th field is from the next data block. The problem I am facing is that when i try to navigate from the first block to the 2nd block the WHEN-VALIDATE-ITEM trigger of the 4th item of the first block is getting fired, thus preventing me to move to the next block and there are no validation trigger on the block level.
please let me know what the problem can be.
Help is required urgently

Hi,
that's standard behaviour. Item Validation will fire when you change blocks. If validation is successful it shuld not stop you, also you could try using ITEM_IS_VALID which if fiddley way to do it.
If it is possible for you to create a view that combines the columns the two blocks then it would make your data entry easier.
one other option is to fiddle with the validation scope
Easo

How to display the alv report blocks wise with out using the blocked alv

Hi
How to display the alv report with out using the blocked alv function module.
Thanks
Chinnu

see this Standard Program
RPR_ABAP_SOURCE_SCAN

Problem in navigating out of block

Hi,
There is a form created with the help of data block wizard. The form contains 4 data blocks. The entry is to be done in a way that the first threee fields are from the first data bolck and the 4th field is from the next data block. The problem I am facing is that when i try to navigate from the first block to the 2nd block the WHEN-VALIDATE-ITEM trigger of the 4th item of the first block is getting fired, thus preventing me to move to the next block and there are no validation trigger on the block level.
please let me know what the problem can be.
Help is required urgently

Hi,
that's standard behaviour. Item Validation will fire when you change blocks. If validation is successful it shuld not stop you, also you could try using ITEM_IS_VALID which if fiddley way to do it.
If it is possible for you to create a view that combines the columns the two blocks then it would make your data entry easier.
one other option is to fiddle with the validation scope
Easo

String problem using B1ITM2B1ITM out of the box B1iSN 8.8 scenario

Hi all,
    I am testing the out of the box scenario for Item syncronization (B1 to B1)
It works fine except for one thing:
    If the ItemName contains xml special characters like < > & in the xml message they are correctly converted into xml rappresentation < > amp; but when the message is sent to the destination company doesn't happen a reconversion to the readable rappresentation.
What do I have to do to have the exact rappresentation even in the destination company? Should i have to put translation tags into the xsl transformation? If so which they are?
Thank you all in advance, Regards Luca.

Solved...
    I found a bug in the conversion to xml format:
>   is uncorrectly replaced with &gt;
so I have replaced:
<ItemName>
     <xsl:value-of select="BO/Items/row/ItemName"></xsl:value-of>
</ItemName>
with:
<xsl:variable name="itname">
        <xsl:call-template name="b1ilib.strgReplace">
             <xsl:with-param name="subs"><</xsl:with-param>
          <xsl:with-param name="var">&lt;</xsl:with-param>
           <xsl:with-param name="wstrg" select="BO/Items/row/ItemName"></xsl:with-param>
     </xsl:call-template>
</xsl:variable>
<ItemName>
     <xsl:call-template name="b1ilib.strgReplace">
            <xsl:with-param name="subs">></xsl:with-param>
            <xsl:with-param name="var">&gt;</xsl:with-param>
            <xsl:with-param name="wstrg" select="$itname"></xsl:with-param>
     </xsl:call-template>
</ItemName>
A similar problem has been detected here:
B1iSN: Tips, tricks and important topics

Creative Zen Touch no longer docking; problem has appeared out of the bl

For the last couple of years, I've used my Creative Zen Touch without any issues. I managed to upgrade to the MTP firmware with no troubles whatsoever. When I tried to plug it in a few days ago and add a number of songs, the computer no longer recognised the player. The USB ports seem fine, and when I plug it in the player boots. It doesn't come up with the "docked" screen on the player, however, and in Windows a "trying to add new hardware wizard" window pops up that never used to pop up before. Whatever I try to do, it never works. I'm using Windows XP SP2 and like I said, I never used to have any issues before until this popped out completely unexpected. It just won't realise that the Zen Touch is a MTP player for some reason!

The people on the forum who would respond are customers, like you, being rude to them probably won't encourage them to help.
These two pages contain some useful tips, have you checked these yet?
http://us.creative.com/support/kb/ar...p?l=2&sid=0053
http://us.creative.com/support/kb/ar...p?l=2&sid=9287
Cat

PSE 13 opens normally, but when I try to Open a file, nothing happens. [was: The problem just occurred out of the blue yesterday.]

PSE 13 opens normally, but when I try to Open a file, nothing happ ens. The Editor screen just stares back at me as if I had done nothing. Should I uninstall/reinstall?

When I do that, the only option I'm given for opening a file is "Open". not
"Open With". Right clicking on a jpeg file and clicking on Open opens the
file in Irfanview, which is the File Association for opening jpeg files. I
suppose I could change the File Association. I'll try it now.
OK, I changed the File Extension Association for .jpg and .jpeg files
to the PSE 13 Editor .exe file shown in my c:/Program Files folder, so now
clicking on any .jpg or .jpeg file opens the Editor, but again, as before,
the clicked on file does not open. It opens fine when associated with
Irfanview (opens in Irfanview, of course). And when associated with PSE
13, the PSE 13 Editor opens and appears to be ready to "receive" the
clicked on file, but nothing happens.
*Learn how easy and rewarding it is to **help a child living in poverty:
www.hopeforafamily.org <http://www.hopeforafamily.org/>. *

3 problems out of the box!

1) accelerometer: in the iPod, I have to turn it 360 degrees in every direction before it recognizes the true orientation and flips to it.
2) freezing: I thought Macs werent supposed to freeze. I go to Phone, and it freezes on my contact list - cant scroll, cant even tap a contact thats showing and call. Cant switch to other Phone functions such as Favorites, Visual Voicemail. I had to reset to get it to work.
3) Battery - after full discharge, full charge, lasts 40 mins
What crap! Over the phone they said the best they could do was send me a loaner. No, I want a new one now! Im going to the Apple Store today to, hopefully, get a replacement. Will post on update.

You have `14 days to return it..I have several problems with mine out of the boxx and 5 days old..I'll be returning it for a credit, than purchase a new one right there to make sure that phone gets the 14 day return policy. I was told the 14 days starts on day of purchase so if they exchange one for you that phone will techinically only have a few days left on it for the return..it's a gotcha..I've had 2 bad phones out of 3..but beat the dead line on the 14 day return..so tomorrow?..another phone goes back for a full refund and I'll purchase another one..I'll be thier little pain in this that's for sure..they put a product out there before it was ready in my opinion

Issue in completing the block step for parallel processing

Hi,
i have created a workflow where in i have used a block step to send workitems to multiple agents. I have used parallel processing in block step. Number of agents are determined in the runtime. Lets say i have two items in my multiple line container( two agent id). Now inside block statement i have put user decesion step. So at the same time workitems goes to the two approver for approval. When both approver take the decesion after that also command is not coming out of the block step. I want the command to be out of block step after this and goes to the next step of workflow.
Please suggest any helpful solution for it.
Regards,
Smit Shah

I think theremust be a binding problem , the binding must be some thing like the below
&USERID[&_WF_PARFOREACH_INDEX&]& ----->&_USERID_LINE&
of the block step from WF container to Block Conatiner. Because when I checked in my system it is behaving as you want., I also include one Decision step inside the block, and then hard coded the userid values int the table USERID and made the above binding and it ia working fine and in the Decision Agent I mentiond the EXPRESSION and assigned the value &_USERID_LINE&

I have changed my icloud account but now can't log out of the old account on my ipad. What can I do next?

I am having problems with logging out of the icloud on my ipad so that I can log in with my new icloud account. How can I change this so that all of my logins will work?

Have you got 'Find My iPad' enabled? This has to be turned off using the original ID address.
Try going back to http://appleid.apple.com and changing the ID back to the original address. If you can get this accepted, then go to the iCloud preferences/settings pane, stop 'Find My ....', and then sign out. Do the same on any other devices or computers.
Then go back to http://appleid.apple.com and change the ID to the new one. Sign in with that on all your devices.
However if the address which forms the original ID is now not working it can't be validated and it's possible that you won't be able to revert to it. In this situation only Support can help you.
To contact iCloud Support: if you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the initial period, you can contact them here:
http://www.apple.com/support/icloud/contact/
You will need the serial number of the covered hardware.

How to find out if I navigate out of the page

Dear gurus,
I need to replicate ‘Warn about changes’ functionality in a certain case.
In my case page A displays view object VO1 in a tabular form, each record having a link in column ‘type’ that takes navigation to page B.
On page B the user changes the type to a new value using a pick list and submits a page B, then clicks Apply button that takes him back to page A with the new value for type brought from page B.
Now page A has a new value for type. Not committed yet. I need to show a warning popup message (similar to seeded ‘Warn about changes’ message) if a user navigates out of page A now.
I am thinking about using javascript to show the popup message. I will use the condition whether VO1 is dirty or not. But I don’t know how to track the fact that I navigated out of page A. Does anybody know how to find out is navigation out of the current page did occur?
Thank you
Anatoliy

Hi,
as there are links on the table from where you are navigating...set the fireaction property to fire an event say
"click". grab that event in contoller.
Controller code:
String name = (String)pageContext.getParameter("event");
if("click".equals(event))
this means you are navigating out of page A.
now invoke a method in AM to check if VO is dirty or not and if it dirty then throw an exception on page rather than pop_up.
String check = (String)am.invokeMethod("checkvodirty");
if("dirty".equals(check))
throw new OAException("The Transaction is dirty",OAException.ERROR);
else
navigate to page B using pageContext.setForwardurl().
In AM you can write :
public String checkvodirty()
sapeEAAddressesVOImpl addr = getsapeEAAddressesVO1();
String test = "";
if(addr.isDirty())//this checks that VO is dirty
test = "dirty";
else
test = "notdirty";
return test;
Thanks,
Gaurav

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel?

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel? On the Front Panel I am making a complex control that consists of a Slider and a Numerical Input box. Both Controls display the same information and either can be used for Input. When one changs, the other is made to display the same value.
But I only want the Slider to display the Label on the Front Panel, to avoid confusion. On the Block Diagram however, I want both controls to display their Labels so that I know what they are. How do I display the Label for a Control on the Block diagram, but not display its Label on the Front Panel?

No. The Label Visible property is separate for the front panel control label and the block diagram terminal label.
How did you start out with the block diagram's label not being visible? Whenever I drop a control or indicator, the label is always visible on both the FP and BD by default. Maybe there is a LabVIEW option that causes new controls/indicators not to have their labels visible by default, but I have yet to find it. I don't think an item should ever be dropped without the label visible, good LabVIEW coding practice demands that the labels for control terminals on the block diagram be visible so that you know what control or indicator a wire is going to.
That being said, I have seen a lot of VI's posted where the label for the terminal on the BD is not shown (against good programming practice.) I've gone to the BD and right clicked to show the label. Sometimes, the people have an empty label (which will turn off the visibility for both the FP and BD) and I'm forced to add some text of my own into the label so I can figure out what their code is doing. When I add some text to the label, at that time, I find both the BD and FP labels become visible.
Are you dealing with controls that have empty labels to start?
Good programming practices:
1. Always have a name for all of your controls, never use and empty label by deleting the text in the label.
2. Make the labels unique. For example, don't have two controls both called Stop. How do you know quickly know which terminal relates to which control?
3. Always show the labels on the block diagram, so you know the function of a control's terminal. If you want to hide the label on the FP, that's okay.
4. If you want a different label to appear on the FP than whatever you actually called the control, then use the caption. You can hide the label and show the caption. This is useful if you need to programmatically change what the "label" is on the front panel such if you are making an application that needs to change its user interface such as for a foreign language.

Firefox have some promlems and it block when is opeining hotmail, in my laptop always have that problem, so i need check my email using another programs...that problem is in my laptop or it´s a problem of navigator??

Firefox have some problems and it block when is opening hotmail, in my laptop always have that problem, so i need check my email using another programs...that problem is in my laptop or it´s a problem of navigator??

I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.

Firefox 34.05 says plugin is out-of-date, insecure, and thus disabled. But...my version is higher than the blocked version

Upon updating to Firefox 34.05, I've been faced with the fact that this version of Firefox (erroneously) thinks some of my plugins are out of date, and has disabled them, for my safety.
For instance, it tells me that "Adobe Acrobat Reader is known to be vulnerable and must be updated". Upon clicking the link to update it, it informs me that "Adobe Reader 9.5.1 and lower has been blocked for your protection.". Okay, cool right? An update should solve that.
Problem is, I don't *have* a version of AR that is 9.5.1 or lower. My version is, according to Firefox itself, version 10.1.4.38. So why is it blocked? Updating the version, as advised in other threads on similar issues, does not seem to work. In fact, the Mozilla plugincheck tells me that my version is up-to-date and is fine.
It is very inconvenient to have to open an entirely different browser, like Opera, just to do certain things that I could previously do with Firefox.
I'd also like to voice my overall disapproval on the way many features of Firefox (enabling disabling Javascript, images, certain stylistic features, the add-on bar) have been done away with and users are being told "you can install an add-on to add that functionality back on". It has always been my understanding that the less add-ons installed the better, given that they are apparently the number one problem when it comes to Firefox having issues. Having to disable 5 new add-ons anytime I want to troubleshoot a problem is not convenient, and makes locating the source of various problems more difficult.
I have no idea why Mozilla is so committed to making changes that users hate, and act as if having third-party add-ons to restore functionality is any kind of solution.

''James [[#answer-672408|said]]''
<blockquote>
Firefox 34.0.5 is not doing the blocking as it is due to the blocklist. https://addons.mozilla.org/firefox/blocked/
Adobe Reader '''10.0 to 10.1.5.*''' has been blocked for your protection.
https://addons.mozilla.org/firefox/blocked/p158 (Blocked on October 5, 2012)
You were looking at another blocklist page which was https://addons.mozilla.org/firefox/blocked/p156 posted on same day.
The https://www.mozilla.org/plugincheck/ is not always accurate or reliable (needs to be manually updated) as Adobe has not been keeping the Adobe products versions to check for updated on that page as the recent Flash updates on December 9 has shown.
It is however accurate when it says versions in Plugins panel of Addons Manager is outdated.
There is Adobe Reader 11.0.10 though it seems like Adobe still provides 10.1.4 at http://get.adobe.com/reader/otherversions/ yet newer versions are at http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
</blockquote>
James, why does the Firefox addon page link to the 9.5 "blocked for your protection" page instead of the 10.5 blocked page? Is that a mistake/failure to update on Adobe's part? That seems like something that should be controlled on the Mozilla side, since it has the 10.5 blocked page in existence as well. Should someone be notified that it's giving the wrong page to people?
The adobe update you linked to made it stop saying it's out of date, but what about the Java Development Toolkit? (As pictured in attached image #3). How should I go about getting that up to date?

I have downloaded Mountain Lion and Time Machine says that my Free Agent Goflex (Seagate) external 2gb drive cannot be used as it is read only. I tried disc utility to repair permissions but that block is greyed out. The disc verifies as being OKI

Since installing Mountain Lion, Time Machine says says that my Free Agent Goflex (Seagate) external 2gb drive cannot be used as it is read only. I tried disc utility to repair permissions but that block is greyed out. The disc verifies as being OKI What next?

Ok, I solved this problem! I ejected the drive and then disconnected it both from the power supply and the USB connector. I then reconnected everything and powered it up again and Then went into TM preferences and chose the drive as the backup. TM did a new backup (well over an hour) and now works as advertised.

Problem in navigating out of the block

Similar Messages

Maybe you are looking for