Problem in Opening Workflow Interface.

Hi,
I have installed Stellent 7.5.1
All the components are working fine, if i'm trying to open Workflow i'm getting pop saying this message
"unable to start the application workflow. Failed to response from host Server returned HTTP response code:502 for URL"
Can any one suggest how this can be solved.
Thanks
AR

Are you referring to the Workflow Admin Applet?
If so do the other Admin Applets fail in the same way?
This is most likely a TCP/IP or webserver issue
Tim

Similar Messages

Problem in Opening Workflow Applet

Hi,
I have installed Stellent 7.5.1
All the components are working fine, if i'm trying to open Workflow i'm getting pop saying this message
"unable to start the application workflow. Failed to response from host Server returned HTTP response code:502 for URL"
Can any one suggest how this can be solved.
Thanks
AR

Are you referring to the Workflow Admin Applet?
If so do the other Admin Applets fail in the same way?
This is most likely a TCP/IP or webserver issue
Tim

Open DeviceNet interface error when TestStand call VIs of NI PCI-8532

Hello,
We use NI PCI-8532 was used as DeviceNet master to do functionality test with a slave (AC Drive).
But when open DeviceNet interface, it happen the error.
We can't find the solution and hope to find help from you.
The basic sequence in TestStand is:
1). Call "Open DeviceNet Interface.vi" to open interface and creat interface object.
Interface(master) setting: interface name=dnet0, MAC ID=0, baudrate=125000bps
2). Call "Open DeviceNet IO.vi" to creat DeviceNet IO object.
Device(slave) setting: MAC ID=63
3). Call "Operate DeviceNet Interface.vi" and operation code=start
4). Call "Wait For State.vi"
5). Call "Read DeviceNet IO.vi" to read data from IO object
6). Call "Close Object.vi" to close IO object handle
7). Call "Close Object.vi" to close interface object handle
Remark, these DeviceNet VIs locates at "C:\Program Files\National Instruments\LabVIEW 2012\vi.lib\DeviceNet\VIAPI".
First time to run sequece in TestStand, it can pass to run step 1) to open DeviceNet interface.
But once there is some error with these steps, and it will happen "Open DeviceNet Interface" error (error code=0xBFF62006) when run these steps again.
Then even use LabVIEW DeviceNet example to test, and it happen the same error except restart computer.
The DeviceNet example locates at "C:\Program Files\National Instruments\LabVIEW 2012\examples\NI-Industrial Communications for DeviceNet\Basic Examples\PXI & PCI\MixedCommunication.vi".
Some information more:
PC operate system: Windows XP SP3
LabVIEW version: 2012 SP1
TestStand version: 2012 SP1
PCI 8532 driver version: 2.3.0
Other installed PCI board: PCI 8531 CANOpen

The following errors may be resolved by resetting the CAN, DeviceNET or LIN device:
Error -1074388986 occurred at ...
NI-CAN: (Hex 0xBFF62006) The object is already open in another application. Solutions: Ensure that only one application at a time uses an object , and that you close all objects prior to exiting your application (don't use LabVIEW toolbar's Abort button).
Error -1074388969 occurred at ...
NI-CAN: (Hex 0xBFF62017) This attribute's value must be provided prior to the Open. Solutions: Set the attribute using the Config function before the Open, and do not set the attribute at any later time; Do not configure multiple CAN Objects for the same ID.
SO,you should reset the DeviceNet.
And another similar issue can explain some points of your problem http://digital.ni.com/public.nsf/allkb/7D9383E9BEAD0B21862571640002F687?OpenDocument

Error while opening the Interface determination

Hi,
I am working on PI system(unix platform) which is a system copy(from a windows platform).
When i tried opening few interface determinations which are already present in ID, it gives me following Error.
====================================================================
= Root Exception ===================================================
====================================================================
Thrown:
com.sap.aii.utilxi.swing.toolkit.ServerCallCancelledException: Unexpected exception.
     at com.sap.aii.ib.clsif.gen.BeanAccessHandler.handleRuntimeExInBusinessMethod(BeanAccessHandler.java:87)
     at com.sap.aii.ib.clsif.oa.ObjectAccess.read(ObjectAccess.java:112)
     at com.sap.aii.ib.client.oa.ObjectHandler.read(ObjectHandler.java:119)
     at com.sap.aii.ib.gui.editor.DefaultPersistenceHandler.load(DefaultPersistenceHandler.java:94)
     at com.sap.aii.ib.gui.editor.XiDocument.load(XiDocument.java:249)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.load(OpenCommand.java:353)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.localOpen(OpenCommand.java:273)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.execute(OpenCommand.java:211)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:198)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:154)
     at com.sap.aii.ib.gui.operations.OperationsServiceProvider.executeDefaultOperation(OperationsServiceProvider.java:295)
     at com.sap.aii.ib.gui.nav.HierarchyNode.executeDefaultOperation(HierarchyNode.java:59)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.DefaultTreeCard.handleHierarchyEvent(DefaultTreeCard.java:198)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree.fireHierarchyActionEvent(ThreadedTree.java:542)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree.executeStandardOperation(ThreadedTree.java:2264)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree$DblClickHandler.mouseReleased(ThreadedTree.java:2196)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor.dispatchEvent(Guitilities.java:319)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:643)
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:612)
     at com.sap.engine.services.rmi_p4.reflect.P4InvocationHandler.invokeInternal(P4InvocationHandler.java:160)
     at com.sap.engine.services.rmi_p4.reflect.AbstractInvocationHandler.invoke(AbstractInvocationHandler.java:52)
     at $Proxy26.read(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor48.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.sap.engine.services.ejb3.runtime.impl.StatelessRemoteStubInvocationHandler.invoke(StatelessRemoteStubInvocationHandler.java:89)
     at $Proxy27.read(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor48.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.sap.aii.ib.clsif.login.BeanProxy.invoke(BeanProxy.java:114)
     at $Proxy27.read(Unknown Source)
     at com.sap.aii.ib.clsif.oa.ObjectAccess.read(ObjectAccess.java:101)
     ... 39 more
Caused by: java.io.InvalidClassException: com.sap.aii.ib.bom.gen.container.ContainerElementState$XsdSimpleState; local class incompatible: stream classdesc serialVersionUID = 42, local class serialVersionUID = -6470496719860432109
     at java.io.ObjectStreamClass.initNonProxy(Unknown Source)
     at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
     at java.io.ObjectInputStream.readClassDesc(Unknown Source)
     at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.defaultReadFields(Unknown Source)
     at java.io.ObjectInputStream.readSerialData(Unknown Source)
     at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.defaultReadFields(Unknown Source)
     at java.io.ObjectInputStream.readSerialData(Unknown Source)
     at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.defaultReadFields(Unknown Source)
     at java.io.ObjectInputStream.readSerialData(Unknown Source)
     at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.readObject(Unknown Source)
     at java.util.Hashtable.readObject(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at java.io.ObjectStreamClass.invokeReadObject(Unknown Source)
     at java.io.ObjectInputStream.readSerialData(Unknown Source)
     at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.defaultReadFields(Unknown Source)
     at java.io.ObjectInputStream.readSerialData(Unknown Source)
     at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.defaultReadFields(Unknown Source)
     at java.io.ObjectInputStream.readSerialData(Unknown Source)
     at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.defaultReadFields(Unknown Source)
     at java.io.ObjectInputStream.readSerialData(Unknown Source)
     at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.readArray(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.defaultReadFields(Unknown Source)
     at java.io.ObjectInputStream.readSerialData(Unknown Source)
     at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.defaultReadFields(Unknown Source)
     at java.io.ObjectInputStream.readSerialData(Unknown Source)
     at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.readObject(Unknown Source)
     at com.sap.engine.services.rmi_p4.reflect.P4InvocationHandler.readResult(P4InvocationHandler.java:303)
     at com.sap.engine.services.rmi_p4.reflect.P4InvocationHandler.invokeInternal(P4InvocationHandler.java:138)
     ... 52 more

Hi,
This is the problem with the XI system. You have to add some patches.
For that check this link same problem solved here.
PI 7.1 : Java exception creating new "Integration process"
Thanks.

Problem to open websides from the meny in a Ipad

I have made a website with dreamwaver CS 5,5 and everything
working just fine, but on a Ipad it is sometime problem to open
page from the drop meny? Is there anybody who can tell me
why it is so? is there any solution ?
Try it if you have access to Apple Ipad Air, http://www.ornskoldsvikshamn.se
Greatful for answers
Mats

The problem is the Spry Menu system that was included in your version of DW.
Spry is not good at handling touch displays since it requires a mouse to make the drop down menus appear and those devices do not have mice.
This is one of the reasons Adobe abandoned Spry back in 2012.
You would be better served using a different menu system, either jQuery or pure css. Do a search in Google for either and you will be given many, many options to choose from. If you aren't comfortable with the copy/paste and minor tweak coding from the how-to instructions, you can also obtain the Menu Magic extension for DW from Project VII that would allow you to use DW's design view interface to make the menus.

Problems with Java AQ interface migrating 9i to 10g

Hi!
I've got problems with Java AQ Interface migrating from 9i DB, JDBC, AQ to 10g rel.2 DB, JDBC, AQ
First, i started to occasionally receive NullPointerException in Oracle JDBC 9.2.0.8
java.lang.NullPointerException
at oracle.jdbc.driver.OracleStatement.describe(OracleStatement.java:6439)
at oracle.jdbc.driver.OracleStatement.get_column_index(OracleStatement.java:6203)
at oracle.jdbc.driver.OracleResultSetImpl.findColumn(OracleResultSetImpl.java:1557)
at oracle.jdbc.driver.OracleResultSet.getString(OracleResultSet.java:1543)
at gpnic.messaging.LDAPMessenger.messageFromRS(Unknown Source)
We were using 9.2.0.8 JDBC and 9i and 10g databases.
We decided to go up for 10g r2 JDBC Drivers, and 10.2 AQ but started to get the following errors:
oracle.AQ.AQOracleSQLException: ORA-25216: invalid recipient, either NAME or ADDRESS must be specified
ORA-06512: на "SYS.DBMS_AQIN", line 454
ORA-06512: на line 1
     at oracle.AQ.AQOracleQueue.enqueue(AQOracleQueue.java:1267)
     at gpnic.comm.messaging.transport.AQTransportAdapter$AQDestanation.send(AQTransportAdapter.java:607)
     at gpnic.comm.messaging.transport.OutboundThread.run(OutboundThread.java:83)
I'm specifying address of an agent, but oracle says I am not.
I tried both native AQ and JMS interfaces, bot got the same error. I specify recipient the following way:
'consumer' var contains name of AQ agent and is not null
native AQ interface:
aqSess = AQDriverManager.createAQSession(db_conn);
AQQueue destQ = aqSess.getQueue(schema, queue);
dequeueOptionsOut = new AQDequeueOption();
dequeueOptionsOut.setWaitTime(AQDequeueOption.WAIT_NONE);
dequeueOptionsOut.setConsumerName(consumer);
dequeueOptionsOut.setDequeueMode(AQDequeueOption.DEQUEUE_REMOVE);
dequeueOptionsOut.setNavigationMode(AQDequeueOption.NAVIGATION_FIRST_MESSAGE);
AQMessageProperty mpOut = new AQMessageProperty();
Vector vRecpt = new Vector();
vRecpt.add(new AQAgent(consumer, null, 0));
mpOut.setRecipientList(vRecpt);
AQMessage aqMsg = null;
AQEnqueueOption eOpt = null;
//prepare message
aqMsg = destQ.createMessage();
CLOB chMsg = CLOB.createTemporary(db_conn, true, CLOB.DURATION_SESSION);
chMsg.open(CLOB.MODE_READWRITE);
chMsg.putString(1,msg);
//creating oracle type message
gpnic.db.SDSTypes.SdsMsgT oraMsg = new gpnic.db.SDSTypes.SdsMsgT(chMsg);
AQObjectPayload payload = aqMsg.getObjectPayload();
payload.setPayloadData(oraMsg);
//setting properties
aqMsg.setMessageProperty(mpOut);
//do enqueueOut
eOpt = new AQEnqueueOption();
destQ.enqueue(eOpt, aqMsg); //<- here AQOracleSQLException is thrown
JMS interface to Oracle AQ:
TopicSession session;
TopicConnection connection;
TopicPublisher publisher;
AQjmsAgent[] recipientList;
connection = AQjmsTopicConnectionFactory.createTopicConnection(db_conn);
     session = connection.createTopicSession(true, Session.CLIENT_ACKNOWLEDGE);
     connection.start();
     Topic topic = ((AQjmsSession) session).getTopic(schema, queue);
     publisher = session.createPublisher(topic);
     recipientList = new AQjmsAgent[1];
     recipientList[0] = new AQjmsAgent(consumer, null);
CLOB chMsg = CLOB.createTemporary(db_conn, true, CLOB.DURATION_SESSION);
chMsg.open(CLOB.MODE_READWRITE);
chMsg.putString(1,msg);
//creating oracle type message
gpnic.db.SDSTypes.SdsMsgT oraMsg = new gpnic.db.SDSTypes.SdsMsgT(chMsg);
AdtMessage adtMessage = ((AQjmsSession)session).createAdtMessage();
adtMessage.setAdtPayload(oraMsg);
((AQjmsTopicPublisher) publisher).publish(adtMessage, recipientList); <- here Exception is thrown
We tried the following combinations
9i DB, 9i jdbc, 9i aq - enqueue ok
10g DB, 9i jdbc, 9i aq - enqueue ok
10g DB, 10g jdbc, 10g aq - exception is thrown
Can anyone help?

Duplicate post, please check Upgrade 9i to 10g

Open Workflow Report

Hi all
Can anyone suggest a report that will list all open workflows and whom they are assigned to.
Thanks for the help.

Hi,
Check in me2n , dynamic selection the field Release indicator. select the value which is not equal to release indicator assign to last approval. and also u can have field Relase stratgy and relase group for selection.

Use of Open Catalog Interface (OCI) in ERP

Dear colleagues,
I am not sure if this is the right forum to post this question but can we use Open Catalog Interface (OCI) without having SRM directly in ECC 6.0? If yes what are the prerequisites, customizing, licensing etc.
What we are planning is end users will select material(s) he/she wants to procure from a catalog from a portal (not an SAP portal) and once this is done purchase requisition will be created in ERP system.
Regards
Melih

ECC6.0 MM does support OCI. This works on both the Purchase Req and PO. You can punchout from MM and shop from an OCI compliant source such as MDM, supplier hosted, other catalog tools and then this informaiton is pulled back into the Purchase Req or PO. OCI is delivered with ECC6.0 MM so there should not be any license issues.
Configuration is part of the catalog web service set up and this is where you maintain information such as URL, user id, password, etc.

Error -1074388957 occurred at Open DeviceNet Interface.vi

I keep getting the following error message
Error -1074388957 occurred at Open DeviceNet Interface.vi
Possible reason(s):
NI-CAN: (Hex 0xBFF62023) The Interface is invalid or unknown. Solution: Verify that the interface is assigned to a specific port within the Devices and Interfaces branch of the Measurement and Automation Explorer (MAX).
=========================
NI-Industrial Communications for DeviceNet: (Hex 0xBFF62023) The Interface is invalid or unknown. Solution: Verify that the interface is assigned to a specific port within the Devices and Interfaces branch of the Measurement and Automation Explorer (MAX).
Here is my system Info:
Windows 7 Pro 64
LabVIEW 2010 32 bit
PCI-CAN card
Drivers Installed: NI Device Net 1.6.7, NI-IndCom for Devicenet 2.2, NI-CAN 2.7.5
Thanks for any help!

I noticed that there are two sets of devicenet VI libraries in my LabVIEW 2010 vi.lib directory that have the same name. The supposedly correct one that LabVIEW automatically places on the block diagram from the palette is from the "DeviceNet" folder. This one gives the error described earlier when I run it. There is another one in the "Nidnet" folder with the same name and this one works and does not give an error. TheNidnet one appears older since it has the older looking front panel objects.
Does not work (error hex BFF62023):
C:\Program Files (x86)\National Instruments\LabVIEW 2010\vi.lib\DeviceNet\VIAPI\Open DeviceNet Interface.vi
Works:
C:\Program Files (x86)\National Instruments\LabVIEW 2010\vi.lib\Nidnet\Nidnet.llb\Open DeviceNet Interface.vi
It is correct to use the nidnet folder with LabVIEW 2010 and newer or should I be using the DeviceNet folder version. If the nidnet version is the correct one, is there a way to make it so these appear on the palette when I go to add them to the block diagram?
Any thoughts?

Problem while opening Bex query on the web

Hello BW experts,
I have a problem while opening Bex query from my SAP Favorites.See below.
When i double click on the query, i get the following page, with the server name KBWS01QX.
But, from RSRT Tcode, select the query > query display as HTML > Click on ABAP Web , click execute as shown below, it is going to the correct URL as in the 2nd screen shot below.
My question is why is it going to the wrong URL when i open it from SAP Favorites menu?
I want it to open the same URL as it opened from RSRT(which is the right one)
What is the Config needed to make it to work from SAP favorites.
Any help would be appreciated.
Thanks alot.
SV

Hello,
Thank you all for your responses.
See below some additional info.
From RSRT, this time I clicked on JAVA WEB, and i get the below URL, which is the same URL i was getting when i executed the query from SAP favorites.
http://kbws01qx.xxxxxxx.com:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCONSUMPTION
Also, i have executed the Function module : RSBB_URL_PREFIX_GET and i get the below values.
It seems that it is trying to connect to Java portal something services may be, but i want it to open in ABAP web only.
Please help.

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

Problem in opening Query

Hi all,
I need to create a workbook on a query, Am facing problem in opening the query, when i try to open a query in analyzer/ RSRT it starts processing & continues till 1 hour or more & finally message "Time limit Exceeded" pops up.
i tried opening a workbook & copy the workbook & tried changing the query in the data provider. but the same problem persists.
can anyone suggest me an alternate way to create workbook on a specified query.
Regards
jasmine.

Hi arun,
It is not due to query performance coz all the performance related measure such as BIA & Aggregates are already taken, i dont even get the variable pop up screen for selecting &
once when i executed the query in RSRT it gave an ABAP Debugger errror. i check if it was problem with table space, but space is available & its auto extendable.

Problem with opening of PDF in my webmail application

I have a problem with opening a pdf file in my webmail application of my internet provider in apple safari since yesterday. When I wanted to open up a pdf file I got a pop up message to allow a connection between adobe and the webmail application which I did. Since then I can not open up a pdf file. If I go to another browser or if I use email from another internet provider I use too it works and I can open up. It seems to be a blockage of the specific combination of this webmail application and safari.
What can I do ?

Hi,
I have same requirement.
I need to cnvert smartform->pdf->send mail.
The mail is send but the attachment is corrupted.
Can you tell me what code you have written so its working in developement?

Problem with opening a indd file in CC 2014.

When I'm trying to open a 5.5 .indd-file in CC 2014 on my Windows computer, I get this error message: 'Either the file does not exist or you do not have permission to open it or the file is used by another program'. However my collague has no problem with opening the document on his Mac computer. I guess it has something to do with a kind of setting in my CC 2014. Can anyone help me?

Nothing to do with ID. It really means what it says - your file permissions are hosed and it being an ID file this could include things like fonts or placed images referenced within it.
Mylenium

Problem with opening some of PDFs in Photoshop CS6.

Hi, I have a problem with opening some of PDFs in Photoshop CS6. It is said: it isn't possible to carry out an order since the module of the file format cannot analyse this file

Don’t know if Reader has this, too, but in Acrobat one can check under Document Properties.
I can convert and place the file in Photoshop CS6.
I would recommend trying the usual trouble-shooting routines and if nothing helps un-installing, running the Cleaner and re-installing Photoshop. (After making sure all customized presets like Actions, Patterns, Brushes etc. have been saved to s secure location.)
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Problem in Opening Workflow Interface.

Similar Messages

Maybe you are looking for