Problem in PI Java stack history.

Hi Experts,
     I am facing a strange problem .
        I did a development on 14th june, and activated it, did a change in 16th june , activated it, did a unit test , delivered the object , and and then see on 20th june that the developmet is still left on 14th june date, and 16th june change not reflected. The Histry does not show any change done on 16th .
    Experts,
       I am not sure whether this is the right forum , but this a serious issue. Please suggest. Do we need to update any patch. I am usig PI 7.1
Regards
Anurag.

Hi Anurag,
The data can be replaced in PI by transporting older objects.
Check if the older version was replaced by transporting. I had faced similar issue. Once transported, the previous history will also be lost and the history of the transported object will only be visible.
Might be some other user had changed this by mistake who has access and authorization.
Cheers,
Souvik

Similar Messages

License Problem in Abap+java stack

Hello,
I have installed my SAP XI/PI System with ABAP+JAVA Stack.
I have applied SAP license at ABAP Stack using slicense for web as abap+java, so is there any need to apply license again for java stack, because when i am checking in Visual Admin under license node , it is showing license is not installed.
If it is not required then why it is showing in Visual Admin tool that license is not installed. can some one give me guidance on this issue.
Best Regards,
V.Singh

Hi,
No restart will not make any difference.
You can overlook this. If in the /nslicense screen you see a permanent license, then no need to worry furthur..
Also in the system info page , you will see:
Software Product :Days Until Expiry
Hope this helps.
Kind regards,
hemanth

SRM Standalone Java Stack Installation

Hi gurus Please help me as subject itsself describe i am facing the problem in SRM JAVA stack installation
I have alredy completed SRm ABAP stck installation now when i am doing the java stack installation its giving me the error
WARNING[E] 2010-12-29 03:44:57.814
CJS-30226 Host: 'sapsrm' or port: 'undefined' or dbSid: 'SRM' is in an inconsistent state or undefined.
ERROR 2010-12-29 03:44:58.694
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR
Please help
me

Dear,
Have you solved your problem? I'm in the same situation!
thank you
Sébastien

Java Stack of Solution Manager is not starting

Hi there!
I have a little problem with the Java stack of the Sol Man.
The Java Stack doesn´t start.
- sapmmc says:
-- J2EE Process Table:
Name    | PID | Type            | Restart | Exitcode | Status    | Debug
server0 | 0      | J2EE Server | No        | -11113       | Stopped | Disabled
-- SMD:
--- Process List:
Process      | Description | Status
jcontrol.exe | J2EE Server | Starting the processes
(starting but nothing happens!!)
- SM28 says:
User SAPSYS (who is this by the way???): Run-time error "RAISE_EXCEPTION" occurred --> Detailed (when i made a double click on this error): Program: SRT_CCMS_DATA_COLLECTOR
About the topic of "not starting jcontrol" I found this: http://sap.ittoolbox.com/groups/technical-functional/sap-basis/jcontrol-is-not-starting-after-restart-in-addin-system-1517702
I also found these log files but have no idea what is important to check it, where is the error and so on...
Is it possible to "switch off" the monitoring of the java stack to the ABAP system?
Please help me!! I am not so familiar with Java administration.
Edited by: Geraldine Pastor Guzman on Jul 28, 2008 12:48 PM
Edited by: Geraldine Pastor Guzman on Jul 28, 2008 12:49 PM

Hi Mr. Geraldine,
Am facing the same problem what you faced earlier, and i gone through this post too.
Even i checked the "default.5.trc" file as follows,
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[./log/defaultTrace.trc]/>
<!PATTERN[defaultTrace.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[Cp1252]/>
<!FILESET[5, 20, 10485760]/>
<!PREVIOUSFILE[defaultTrace.4.trc]/>
<!NEXTFILE[defaultTrace.6.trc]/>
<!LOGHEADER[END]/>
#1.5#00188BF955DA006F00046A7600001478000447109FDC41EB#1204036633930#com.sap.security.core.persistence.datasource.imp.R3PersistenceBase##com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.Runnable.run()####sapsandbox.dhruv_ASM_1988450#Guest#b65bcfe0884a11dca0a800188bf955da#Thread[R3RoleDataSource_UpdateThread[8563951],10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/System/Security/Usermanagement#Java#Exception during background update of role data buffer##Exception during background update of role data buffer
[EXCEPTION]
#1#com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE:      Logon not possible (error in license check)
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1015)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3238)
     at com.sap.mw.jco.JCO$Pool.getClient(JCO.java:5380)
     at com.sap.mw.jco.JCO$PoolManager.getClient(JCO.java:6149)
     at com.sap.mw.jco.JCO$PoolManager.getClient(JCO.java:6099)
     at com.sap.mw.jco.JCO.getClient(JCO.java:8766)
     at com.sap.security.core.persistence.datasource.imp.r3persistence.R3JCo640Proxy$Client640.fetchClient(R3JCo640Proxy.java:441)
     at com.sap.security.core.persistence.datasource.imp.r3persistence.R3JCo640Proxy$Client640.execute(R3JCo640Proxy.java:367)
     at com.sap.security.core.persistence.datasource.imp.R3RoleDataSource.checkBufferRefresh(R3RoleDataSource.java:2223)
     at com.sap.security.core.persistence.datasource.imp.R3RoleDataSource.access$000(R3RoleDataSource.java:54)
     at com.sap.security.core.persistence.datasource.imp.R3RoleDataSource$1.run(R3RoleDataSource.java:680)
     at java.lang.Thread.run(Thread.java:534)
#1.5#00188BF955DA001D0000000E0000025C000495286DB204DC#1289900778453#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_49##0#0#Error#1#/System/Server#Plain###Service com.sap.security.core.ume.service error. Nested exception is: com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:388)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Logon not possible (error in license check)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:178)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:357)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:156)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:109)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:56)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:270)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:295)
     ... 6 more
#1.5#00188BF955DA001D000000100000025C000495286DB206FE#1289900778453#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_49##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:388)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Logon not possible (error in license check)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:178)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:357)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:156)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:109)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:56)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:270)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:295)
     ... 6 more
#1.5#00188BF955DA001D000000120000025C000495286DB20841#1289900778453#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_49##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
Please help me to sort out this issue,as am new to this.
Thanks in advance.

Problem with Java Stack- dev_w2 log mentioned.

Hi everyone, I have a problem with Java Stack, I could not connect to XI home page,
I am unable to login to j2ee engine using visual Administrator.
Please go through the log below. And help me out to resolve this issue and let me know what could be the problem.
trc file: "dev_w2", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
B New connection 0 created
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    43
M intno      20020600
M make:      multithreaded, Unicode
M pid        4140
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 4140) [dpxxdisp.c   1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm)          13160     (1316)
M DpShMCreate: sizeof(tm_adm)          2780232     (13832)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpShMCreate: sizeof(comm_adm)          290000     (580)
M DpShMCreate: sizeof(vmc_adm)          0     (372)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 060A0040, size: 3195320)
M DpShMCreate: allocated sys_adm at 060A0040
M DpShMCreate: allocated wp_adm at 060A1B58
M DpShMCreate: allocated tm_adm_list at 060A4EC0
M DpShMCreate: allocated tm_adm at 060A4EE8
M DpShMCreate: allocated wp_ca_adm at 0634BB30
M DpShMCreate: allocated appc_ca_adm at 063518F0
M DpShMCreate: allocated comm_adm_list at 06353830
M DpShMCreate: allocated comm_adm at 06353848
M DpShMCreate: allocated vmc_adm_list at 0639A518
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0639A540
M DpShMCreate: allocated wall_adm at 0639A548
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X <ES> InitFreeList
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M calling db_connect ...
C Got ORACLE_HOME=c:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSXI's password
C Connecting as /@SXI on connection 0 ...
C Attaching to DB Server SXI (con_hdl=0,svchp=04494404,svrhp=04495074)
C
C Starting user session (con_hdl=0,svchp=04494404,srvhp=04495074,usrhp=0449D8AC)
C
C Now I'm connected to ORACLE
C Got SAPSXI's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=04494404,usrhp=0449D8AC)
C Now I'm disconnected from ORACLE
C Connecting as SAPSXI/<pwd>@SXI on connection 0 ...
C Starting user session (con_hdl=0,svchp=04494404,srvhp=04495074,usrhp=0449D8AC)
C Now I'm connected to ORACLE
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance sxi is running on STARXI with ORACLE version 9.2.0.5.0 since 20081020
B Connection 0 opened
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20081020 123752 STARXI
M db_connect o.k.
I MtxInit: 2 0 0
M SHM_PRES_BUF               (addr: 08230040, size: 4400128)
M SHM_ROLL_AREA          (addr: 62E40040, size: 77594624)
M SHM_PAGING_AREA          (addr: 08670040, size: 39845888)
M SHM_ROLL_ADM               (addr: 0AC80040, size: 775412)
M SHM_PAGING_ADM          (addr: 0AD40040, size: 525344)
M ThCreateNoBuffer          allocated 540152 bytes for 1000 entries at 0ADD0040
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12160 bytes (50 server) at 0AE60040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X Using implementation flat
X ES initialized.
B
B db_con_shm_ini: WP_ID = 2, WP_CNT = 10
B dbtbxbuf: Buffer TABL (addr: 103D00C8, size: 30000128, end: 1206C4C8)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 14302848
B ***LOG BB0=> buffer TABL       started with length 30000128   bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]
B dbtbxbuf: Buffer TABLP (addr: 0E4000C8, size: 10240000, end: 0EDC40C8)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 5046656
B ***LOG BB0=> buffer TABLP      started with length 10240000   bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 41 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer EIBUF (addr: 0EDE00D0, size: 4194304, end: 0F1E00D0)
B ***LOG BB0=> buffer EIBUF      started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B Layout of ESM   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer ESM   (addr: 0F1F00D0, size: 4194304, end: 0F5F00D0)
B ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B Layout of CUA   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 3001 * 48 = 144048
B 4: 1500 * 232 = 348000
B 5: 3001 * 4 = 12004
B 6: 1 * 200 = 200
B 7: 193 * 4 = 772
B 8: 5012 * 512 = 2566144
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer CUA   (addr: 0F6000D0, size: 3072000, end: 0F8EE0D0)
B ***LOG BB0=> buffer CUA        started with length 3000k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B Layout of OTR   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 81 * 4 = 324
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer OTR   (addr: 0F8F00D0, size: 4194304, end: 0FCF00D0)
B ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#1 @ 2206] [dbcalbuf2206 ]
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:640.00]):
B   max_blocking_factor = 15, max_in_blocking_factor      =   5,
B   min_blocking_factor = 10, min_in_blocking_factor      =   5,
B   prefer_union_all    =   0, prefer_union_for_select_all =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B   select *            =0x0f, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M
M PfHIndInitialize: memory=<0AEEC488>, header=<0AEEC488>, records=<0AEEC4D0>
M SecAudit(init_sel_info): init of SCSA completed: 02 slots used
M ***LOG AV6=> 02& [rsauwr1.c    1619]
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=C:\usr\sap\SXI\DVEBMGS00\sec, AS=starxi, instanceid=00)
N
N SsfPseLoad: Downloading file C:\usr\sap\SXI\DVEBMGS00\sec\SAPSYS.pse (client:    , key: SYSPSE, len: 1078)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
S
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 121963B0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      intervals: query=50, rescan=1800, global=300 info=120
S      processing queue enabled
S creating spool memory service RSPO-RCLOCKS at 0FEB00A8
S doing lock recovery
S setting server cache root
S using server cache size 100 (prof=100)
S creating spool memory service RSPO-SERVERCACHE at 0FEB0370
S    using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 4kb, admin_size: 5032kb.
A PXA allocated (address 67850040, size 150000K)
A System name
A ORACLE...........................SXI........20081004121019.....................................
A is used for RFC security.
A Sharedbuffer token: 41534050...33 (len: 111)====== 2b61c190857e36a8681ef39a...
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm initialized (addr=579F4000 leng=20955136 end=58DF0000)
A >> Shm MMADM area (addr=57E69DF0 leng=126176 end=57E88AD0)
A >> Shm MMDAT area (addr=57E89000 leng=16150528 end=58DF0000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 9
M ThrCreateShObjects          allocated 10568 bytes at 0FFD0040
M ThVBStartUp: restart pending update requests
M
M ThVBAutoStart: update-auto-delete
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\SXI\DVEBMGS00\sec): ok
N SsfSapSecin: PSE C:\usr\sap\SXI\DVEBMGS00\sec\SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\SXI\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 640, [6400.0.43.20020600]
W    ITS Plugin: Int.version, [31]
W    ITS Plugin: Feature set: [3]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by profile
M ThISetEnqname: enq name = >starxi_SXI_00                           <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E Enqueue Info: enque/disable_replication = 2
E Enqueue Info: replication disabled
E
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime    = -999
E EnqId.RandomNumber      = -999
E ReqOrd.TimeInSecs       = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime    = -999
E EnqId.RandomNumber      = -999
E ReqOrd.TimeInSecs       = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId:          EnqTabCreaTime/RandomNumber    = 20.10.2008 12:38:10 1224486490 / 4140
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec    = 20.10.2008 12:38:11 1224486491 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec    = 20.10.2008 12:38:11 1224486491 / 1
E Status:         STATUS_OK
E -
M ThActivateServer: state = STARTING
L Begin of BtcSysStartRaise
L Raise event SAP_SYSTEM_START with parameter <starxi_SXI_00       >
L End of BtcSysStartRaise
I
I MPI<c>9#3 Peak buffer usage: 5 (@ 64 KB)
M
M *** WARNING => ThCheckReqInfo: req_info & DP_CANT_HANDLE_REQ
M return number range rc 12
M *** WARNING => ThNoGet: get from object (cli/obj/subobj/range = 000/ALAUTOUID /      /01) returned rc 12
S
S server @>SSRV:starxi_SXI_00@< appears or changes (state 1)
B table logging switched off for all clients
S
S server @>SSRV:starxi_SXI_00@< appears or changes (state 1)
M
M hostaddrlist return 0
M
M hostaddrlist return 0
M
M hostaddrlist return 0
M hostaddrlist return 0
M hostaddrlist return 0
Regards,
Varun.

You probably made the same mistake as I did and added the tables manually to the "sample" database instead of the "sun-appserv-samples" database.
marc

Java Stack Problem

Dear Gurus,
Right Now I have Installed in my server sapfs Abap stack+Java stack.Abap stack is working fine,Java stack also config toll is working fine.Iam new to Java Stack,I have open explorer and given this path http://hostname:5<instanc no of java>00/irj/portal but page cannot displayed.Please give sugestion any problem with Java stack or else any parameter I have to set.
Best Regards,
kk

Hello krishna murthy,
I would suggest you use jcmon to test whether java stack is really running, because network or browser could prevent java page being properly displayed. Usage:
logon as <sid>adm
jcmon pf=<you instance profile>
then "20", you will see whether java dispatcher, server, sdm running. If running, it should like:
|Idx|Name               |PID     |State                |Error|Restart|
|---|-------------------|--------|---------------------|-----|-------|
| 0|dispatcher         |   25298|Running              |    0|yes    |
| 1|server0            |   25299|Running              |    0|yes    |
| 2|SDM                |   20917|Running              |    0|yes    |
good luck.
Rongfeng

Problem to start the java stack . its not kernel. its java stack CAF

Hello SAP,
We have a problem to start the java stack. We saw in the SAP
Managementconsole that the instances are running,
The problem began after the deployment of the sap.com/CAF increaseing
from patch 6 to 12. After that we make the update from 12 to 12.1
The current kernel is number 95, the latest one.
This plattform is Netweaver 04S.
The B2C applications are stopped
We hope you help us as soon as possible , because we are getting late
with the project.
My email:
[email protected],
***send me and email and I can send you the files:
*error in java stack.doc (detail of the error)
*the directory work
*and the log file of the SDM is attached in the file information_log_SDM.txt
The log file of de E:\usr\sap\CRD\DVEBMGS01\SDM\program\log
is also attached in the file sdmcl20070716142953.log
thanks for your fast answer
Best Regards,
Luis Moreno

aply the note: 1010640 and later restart the system
Luis Moreno

Java Stack in BI 7.0.

Hi, Friends Please help me in the foliwng situation..
We are using BI 7.0 and which is not having Java Stack. Please clarify me..
1. Is it Mandatory to Install Java Stack in SAP BI.
2. When we need Java Stack in BI server.
3. We have Portal also, and we are displaying all reports in POrtal.
4. What are problem we will get in we don't have Java Stack in BI 7.0.
5. What are benifits we will get in we don't have Java Stack in BI 7.0.
Thanks
Ganga
Edited by: Ganga on Jan 22, 2010 7:18 AM

The short answer is yes, you need Java stack to use most of BI 7.0 tools. However, you do not need Java Stack for Bex Analyzer and Query designer with one exception, you need Java stack if you want to execute the query from the query designer by using execute button. Please refer to below link.
[BI 7.0 Reporting - Java Stack or Abap Stack ?|http://www.ittestpapers.com/blogs/bi-70-reporting-tools---migrating-bex-reports-from-35-to-70.html]

BI Java stack instalaltion

Dear Gurus,
We are going for Netweaver 7.0 EHP1 BW-BO implementation. We are going to install the seperate instances for the abap and java for the BW landscape . We are going to install DEV abap and java on the same host.
Abap stack is installed.
while going throug the installation,I have two questions
1) Installation of Database instance (Java Stack) in the existing Database instace (Abap Stack). Or Go with the different database for the Java stack.
2)In the installation phase it will ask for the User management Engine configuration.
   a) Java engine ( if i go with this option how the abap and java will have communication)
   b) Abap (communication happens between abap and java using rfc connections)
Go with which option.
i will go with the opton java engine. How make the communication between abap and java. Pleae reply soon.
Reagards,
MNA

Hi,
> 1) Installation of Database instance (Java Stack) in the existing Database instace (Abap Stack). Or Go with the different >database for the Java stack.
I will recommend to have different database for your Java system. Because if you will take same database then it will be MCOD installation. And MCOD has a lot of limitations like if your ABAP system is down then Java will also be down and performance problem etc.
> 2)In the installation phase it will ask for the User management Engine configuration.
>    a) Java engine ( if i go with this option how the abap and java will have communication)
>    b) Abap (communication happens between abap and java using rfc connections)
If you will take UME of your java system as Java system only. Then ABAP and Java system will communicate with JCO RFC. I will go with option a if there are no constraints.
If UME will be ABAP system then also communication will be through RFC only.
Thanks
Sunny

Information Broadcaster Utilizes 60 to 90 % of Java Stack CPU

We are currently on BI 7.0 and EP7.0; we have started using Information Broadcaster and we are noticing that it utilizes 60 to 90% of CPU on the Java stack.
One thing to inform is that we are using the same Java Stack for Portal, BI and R/3.
90% of CPU seems abnormal to me (At the peak of its usage the Portal Performance goes down).
Will this issue get solved if we use a dedicated Java Stack for BI? Thoughts Please.
Regards,
Deepak

Deepak,
We too facing the same problem.
After proper analyzation our experts decided to go for a dedicated Java Stack for BI to increase the performance.
Regards,
Ramkumar.

How to enable ping service on java-stack only system

I have installed SAP NetWeaver 7.0 - Java Trial on local host.
How can you activate the ping service there?
It should work under "http://localhost:50000/sap/bc/ping"
(I know how to activate it with transaction SICF in an abap system, but I have java-stack only here, so I can't call transactions. I can only use the Visual Admin, right?, but there I could not detect a ping service so far)
More detailed:
I created system "SAP_WebDynpro_XSS". (this is necessary for connecting to ECC abap backend for ESS Packages) and set following parameter:
template:"SAP system using connection string"
     category: Web Application Server
          Web AS host name: chrisSAP:50000
          Web AS path: /webdynpro/dispatcher/
          Web AS protocol: http
But when I test the "SAP Web AS Connection" for this system, I got following error:
7. The Web AS ping service http://chrisSAP:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
8. An HTTP/S connection to http://chrisSAP:50000/webdynpro/dispatcher/ was not
obtained successfully; this might be due to a closed port on the Firewall.
I guess step 8 did not pass because step 7 failed, and not because of a closed port or firewall (I made sure everything is open.)
The strange thing is that the connection test fails, but the connection seems to work fine!
I mean I can see the front ESS page in the portal when logging in with an ESS-user, and there are no errors in the log. If I change the SAP_WebDynpro_XSS parameters to some other made-up values, then the front ESS page does not come up and some errors appear with "SAP_WebDynpro_XSS" inside.
That proofs that the connection is working despite the failed connection test, right?. But what can I do that the connection test passes? It seems that somehow SAP has hardcoded the path "/sap/bc/ping" which usually exists on an abap system. But I have java-stack only, so how can I tell that the function that runs the test?
A system connection test fails, but the connection is working fine!
If someone could explain that to me...

Dear Srini Nookala,
thank you for your answer. Unfortunately I don't understand the relation of my question to your answer.
>> check with OSS note 1019335 SAP NetWeaver AS Java 6.40 SP21
I have Version 7.0 SP14. I read the OSS note, but there are around 100 changes listed. I read them all, but couldn't figure out one that has to do with ping and system test. So which sentence inside the note are you referring to?
>> The problem is due to JCo parameters configuration not properly, Ask Basis team, they will do it.
I am basis team. I configured the JCo properly as described in manual and tested them afterwards. They run successful. Also all the links that you gave refer to JCO connections about how to set them up and test them. But what have JCO connections to do with System-connection tests? As far as I know JCO-connections are not used for system connectivity tests. You can set them up independent. I understand that JCO-connections are used for getting data from backend servers. But the system "SAP_WebDynpro_XSS" is defined for determing the webdynpros on localhost (frontend, not backend).
So please can you explain me what JCO-connections which refer to remote hosts have to do with a ping service on local host that cannot be reached? And which part would be not configured "properly"? Timeouts? user?
To define my question more properly:
Is it possible to make the connection test work on a java-stack only host for a system that refers to itself (localhost)? Or is it a known bug?
Some sub-questions
Am I using the right system template (I am using "SAP system using dedicated application server")
I have no abap on local host (chrisSAP). Only java stack. Usually path ..sap/bc/ping refers to an abap system, right? So in my opinion I have 3 possibilities:
- install abap-stack on local host (portal) and activate ping service.
- somehow install a ping service that runs under the given URL in Visual Admin (how?)
- somehow tell the connection test to skip pinging and continue test. (How?)
Any additional advice would be highly appreciated.

Single-Sign-On (SSO) configuration on JAVA Stack through HTTP Header method

Hello SDN community,
in the context of a Proof of Concept, we are testing the integration of Microsoft Sharepoint Portal with SAP Backend (addin) systems.
As the architecture impose use an external scenario (access from the internet), we couldn't use the Kerberos (SPNego) solution and thus we chosed the http header solution which in short uses an intermediary web server (in this case the IIS of the MOSS solution) which will act as authority.
I miss information on how the workflow works for this http header authentication method. Through the visual administrator of the addin JAVA stack, it is possible to configure each application with a customized authentication (a choice of security modules). But this all that I know.
My task is to configure SSO. From a sharepoint portal, the user should be able to access Web Dynpros and BSPs. I imagine that the very first call to a webdynpro or bsp (or maybe when we log on the sharepoint portal), the request to the WDP or BSP will first be forwareded by the intermediary server to the JAVA stack (or is it the SAP dispatcher that has to be configured).
Is there an application to be built on the java stack to deal with the authentication, modify http header?
What will the Java stack return? a sap long ticket? a token?
How will the redirect work (to by example a BSP which is in the ABAP stack)?
SAP preconise to secure with SSL the link between the intermediary web server and the JAVA stack, is IP restriction also a solution?
A lot of questions about how this SSO http header should work,
I would be very greatful for any help, or info,
Kind regards,
Tanguy Mezzano

Hi Tanguy,
to tell you the truth I'm really unsure about what you are trying to achieve. When I started posting to your thread I thought all you wanted was trying to access your J2EE engine via Browser and authenticate against the engine using HTTP Header Variables. Nevermind:
Here are some answers to your question:
in fact I did succeed, the problem was that even after domain-relaxation done by the J2EE, I had to change the domain of th SAP cookie to the bbbb.domain.com to be understood (I would have thought that all hosts in/under domain .domain would have accepted such a cookie but it seems that no...).
The server does not care about the domain because Cookies in an HTTP Request do not contain any domain information. The domain is just important when the Cookie is set by the server so your Client (Browser) will know in which cases the Cookie may be sent or not. So if your domain is xxx.yyy.domain.com and your cookie is issued to .domain.com then your Browser will definitely sent it to all hosts under .domain.com (This includes xxx.yyy.domain.com etc.)
My current scenario is: in a first request get a SAP Logon Ticket from the Java Stack, then change its domain and then directly call the backend with it.
You can do that but there is no Client involved in this scenario. So this is useful if you just want to test the functionality (e.g. authentication to J2EE using Header Variables (This works finally!!!) and then use the fetched Logon Ticket to test SSO against any trusted Backend!!)
So everything's is in a Java Client application without using any redirection.
If I understand you, you're solution is from the Browser call a servlet (which is deployed on the Java Stack and has no authentication schema) by passing to it our http header.
No, you should initially authenticate somewhere! I thought that maybe you had some resource you access before accessing the Java Stack. This could be any application (e.g. deployed on a Tomcat or JBOSS or other server or if you like even SAP J2EE). After authenticating there you are aware of the username and could use it to procceed (e.g. Authenticate against the J2EE using the same user and HTTP Header authentication for that particular user!)
That servlet will transfer the http header (with the HttpClient app) in order to get from the Java Stack a SAP Logon ticket, and then to redirect to the resource and by sending back the cookie in client browser. Am I correct?
This was just a suggestion because I realized that there was no Client ever involved in any of your testing (looked strange to me!). I was just thinking that it would be easier for you to just get the Cookie into your Browser so your Browser would do the rest for you (in your case finally send the Logon Ticket Cookie to your Backend to test SSO using Logon Tickets!).
The AuthenticatorServlet somehow serves as a Proxy to your client because your client is not able to set the Header Variable. That's why I initially suggested to use a Proxy (e.g. Apache) for that purpose. The problem is just that if you use a Proxy you will have to tell it somehow which username it should set in the Header Variable (e.g. using a URL Parameter or using a personalized client certificate and fetch the username (e.g. cn=<username> from the certificate!)
This way of doing would simplify the calls for sso for each new application needing authentication, instead of having all code each time in it...
I'm stuck again! Do you want to authenticate an End User or do you want to authenticate an application that needs to call any resources in your Backend that requires authentication?
So my problem now, is how to call the servlet from the client browser:
I'm trying to call my servlet from the browser but I don't succeed. I am able to understand how to reach a jsp from the Java Stack, but not to reach a servlet. I don't find the path to my servlet:
<FORM method="POST" action="SSORedirect2" >
A JSP is a servlet too. There is just no JAVA Class involved!
You do not need any POST Request to invoke a Servlet.
I see that my servlet is deployed, but I don't how what path to give to my form to invoke the servlet, here follows my web.xml
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE web-app (View Source for full doctype...)>
- <web-app>
<display-name>WEB APP</display-name>
<description>WEB APP description</description>
- <servlet>
<servlet-name>SSOredirect2</servlet-name>
<servlet-class>com.atosorigin.examples.AuthenticatorServlet</servlet-class>
</servlet>
- <servlet>
<servlet-name>SSORedirect2.jsp</servlet-name>
<jsp-file>/SSORedirect2.jsp</jsp-file>
</servlet>
- <security-constraint>
<display-name>SecurityConstraint</display-name>
- <web-resource-collection>
<web-resource-name>WebResource</web-resource-name>
<url-pattern>/*</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
- <auth-constraint>
<role-name>DefaultSecurityRole</role-name>
</auth-constraint>
</security-constraint>
- <security-role>
<role-name>DefaultSecurityRole</role-name>
</security-role>
</web-app>
If you have an AuthenticatorServlet Class all you need is to add the Servlet Mapping in your web.xml file
e.g.
<servlet>
<description>
</description>
<display-name>AuthenticatorServlet</display-name>
<servlet-name>AuthenticatorServlet</servlet-name>
<servlet-class>com.atosorigin.examples.AuthenticatorServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>AuthenticatorServlet</servlet-name>
<url-pattern>/AuthenticatorServlet</url-pattern>
</servlet-mapping>
You can directly call the Servlet in your Browser by calling the URL provided in the url-pattern of your Servlet mapping ( in this case /AuthenticatorServlet). The engine will invoke the Class "com.atosorigin.examples.AuthenticatorServlet" in the background and do whatever you defined there!
I have also to pass my http header and the redirectUrl in the GET request.
If you like! I just suggested this for testing purposes. As I stated before you need a way to tell your proxy (or in your case AuthenticatorServlet) which user should be set when calling the Engine in order to authenticate using HTTP Header. You could use the URL Paramater to define the user you actually want to use when you set the Header Variable.
I just introduced the redirectURL because you were talking about redirects all the time. So if you finally want to call the Backend you could define the Backend URL in the redirectURL Parameter and the Servlet will make sure that you are redirected to this location after the whole process!
Thx for your input very helpful,
But again 0 points
Cheers

'A file or directory doesn't exist' error during java stack update

Dear All,
I've done a fresh installation of solution manger system on IBM iseries box (OS400 & DB2 combo).
As part of post installation activity, I've updated the kernel patch, updated the ABAP stack to sp4, and am currently doing the java stack update.
I'm struck with one error. The log file shows:
Feb 23, 2012 7:54:35 PM Error: /usr/sap/SLM/SYS/global/j2eeclient/META-INF/SAP_MANIFEST.MF (A file or directory in the path name does not exist.)
Feb 23, 2012 7:54:35 PM Error: Error deploying Fileset Complete to /usr/sap/SLM/SYS/global/j2eeclient
Feb 23, 2012 7:54:35 PM Info: ***** End of File-System Deployment com.sap.engine.client *****
Feb 23, 2012 7:54:35 PM Error: Aborted: development component 'com.sap.engine.client'/'sap.com'/'SAP AG'/'7.0209.20110628100654.0000'/'1', grouped by :
Deployment was not successful
I've checked the file system and found that the directory META-INF is not present in /../../global/j2eeclient
Please suggest a solution.
Thank You.
regards,
vin

Hi,
This is an easy solution:
From the OS command line, do WRKLNK, go to /usr/sap/SLMS/global/j2eeclient, at the top where it shows the directory, do a copy on this. Then at the command line type MD, do F4, paste the directory name in the first line, then after j2eeclient add /META-INF'
IMportant*** Make sure the full directory name is in single quotes.*
*On the next 2 lines change INDIR to RWX. Then press enter and re-run your job. If you have any problems let me know.

Error while upgrading EP 7.0 SP6 to SP9 (in java stack)

Dear All,
We have EP 7.0 with SP 6 , OS = Win2k3 SP2, DB = Oracle 10.2 g.
Upgrading it to Sp9 , we have downloaded dumps from service marketplace.
Kernel & ABAP stack upgradation have been completed and the system is showing it clearly from status menubar.
Now we are trying to upgrade JAVA stack from JSPM .At first we selected all the compnents to upgrade from level 6.0(6.2/6.3) to 9.00 but only sap.com/SAP_JAVASL comp got deployed.Other compnents were taking huge amount of time and in the status bar jmon process ids are only increasing one by one. (at one time it reaches to 50000 approx)
So, we abort the process and tried to deploy one by one , in that case some components got deployed , these are sap.com/BASETABLES,sap.com/CORE_TOOLS,sap.com/JLOGVIEW.
When we tried to deploy sap.com/SAP-JEE , it got deployed with warning (ultimately not happened) and dispatcher was in ACTIVE state(yellow) instead of running.So we abort the process and restart the cluster as well as reboot the system.This makes running the dispatcher.
Then we tried to deploy sap.com/SAP-JEECOR . It was also taking huge time. So we abort this process also.But now we are facing some problem that is dispatcher is not up.We restart the cluster and reboot the system still the problem persists.
note:There is no space problem
**)disp+work.exe's status is Active instead of running
**)Both msg_server & igsdw.exe are running
**)From portal it is showing dispatcher is running but no server connected
**)In JSPM log file one error msg is comming :
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
java.lang.AbstractMethodError: com.sap.security.core.server.ume.service.UMEServiceFrame.useTxManager()Z
So how should we proceed as no further deployment is possible as it needs dispatcher to be up.
Any help will be highly appreciated in this regards.
Regards,
Souren

Its a network issue

Java stack not starting in a PI 7.1 instance

Hi experts,
We are facing a probling while starting a PI 7.1 instance. the Java stack is not getting up. It is coming up to the phase 'starting apps' and failing from there. We had recently updated the support pack of the instance from 6 to 7. But the instance was running fine for around 12 hours after the application. Now, suddenly we seem to have got this issue. PF below the applications log. Request you to please check this and suggest what the problem might be. thanks in advance.
applications log
<!LOGHEADERSTART/>
<!HELPManual modification of the header may cause parsing problem!/>
<!LOGGINGVERSIONhttp://1.5.7.1006/>
<!NAMEhttp://./log/applications_00.log/>
<!PATTERNhttp://applications_00.log/>
<!FORMATTERhttp://com.sap.tc.logging.ListFormatter/>
<!ENCODINGUTF8/>
<!FILESET0, 5, 10485760/>
<!PREVIOUSFILEhttp://applications_00.4.log/>
<!NEXTFILEhttp://applications_00.1.log/>
<!LOGHEADEREND/>
#1.5 #001D090E4BBE000400000003000038E2007915DA69909431#1234724420487#/Applications/DI/SDIC##com.sap.di.sdic.state.store.migration.support.SystemCopyInfo#######System 27##0#0#Info#1#com.sap.di.sdic.state.store.migration.support.SystemCopyInfo#Plain###SystemCopy folder not found under the system global folder /usr/sap/P7R/SYS/global.#
#1.5 #001D090E4BBE000400000004000038E2007915DA69909431#1234724420529#/Applications/DI/SDIC##com.sap.di.sdic.srv.java.SDICServiceFrame#######System 27##0#0#Info#1#com.sap.di.sdic.srv.java.SDICServiceFrame#Plain###Successfully started SDIC service.#
#1.5 #001D090E4BBE002900000000000038E2007915DA69A84A81#1234724438423#/Applications/ExchangeInfrastructure/Security##com.sap.aii.security.SecurityServiceFrame.SecurityServiceFrame.getServiceProperties()#######System 26##0#0#Info#1#com.sap.aii.security.SecurityServiceFrame#Java###QUEUE_CONNECTION_FACTORY: , ERROR_QUEUE: , QUEUE: , JARM_PREFIX: , JARM_USER: , JARM_ENABLED: , CLEAN_INTERVAL: .#7#jmsfactory/default/QueueConnectionFactory#jmsqueues/default/MessageSecurityErrorQueue#jmsqueues/default/MessageSecurityQueue#XI:Security:#XISecurityUser#false#12#
#1.5 #001D090E4BBE002900000001000038E2007915DA69A84A81#1234724438423#/Applications/ExchangeInfrastructure/Security##com.sap.aii.security.SecurityServiceFrame.SecurityServiceFrame.getServiceProperties()#######System 26##0#0#Info#1#com.sap.aii.security.SecurityServiceFrame#Java###PROTECTION_DOMAIN: .#1#sap.com/com.sap.aii.adapter.soap.app#
#1.5 #001D090E4BBE003600000000000038E2007915DA69A8DB09#1234724439825#/Applications/ExchangeInfrastructure##com.sap.aii.utilxi.sld.XIIntegrationServer#J2EE_GUEST#13#####Application 23##0#0#Error#1#com.sap.aii.utilxi.sld.XIIntegrationServer#Java###Failed to create access client for SLD, central app server set to null
Thrown:
com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
at com.sap.lcr.api.cimclient.HttpRequestSender.newClientException(HttpRequestSender.java:710)
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:599)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:345)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:200)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:148)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:445)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:749)
at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:982)
at com.sap.aii.utilxi.sld.SldProxy.getInstances(SldProxy.java:380)
at com.sap.aii.utilxi.sld.SldProxy.getCentralAppServerHost(SldProxy.java:609)
at com.sap.aii.utilxi.sld.XIIntegrationServer.provideCentralAppServerHost(XIIntegrationServer.java:641)
at com.sap.aii.utilxi.sld.XIIntegrationServer.constructSldInstanceName(XIIntegrationServer.java:424)
at com.sap.aii.utilxi.sld.XISubSystem.getSldInstanceName(XISubSystem.java:1004)
at com.sap.aii.utilxi.sld.XIIntegrationServer.getSldInstanceName(XIIntegrationServer.java:672)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:114)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
at com.sap.aii.af.lib.sld.impl.SLDAccessor.getISData(SLDAccessor.java:248)
at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getISData(SLDAccessImpl.java:47)
at com.sap.aii.adapter.xi.ms.SLDReader.fire(SLDReader.java:79)
at com.sap.aii.adapter.xi.ms.SLDReader.run(SLDReader.java:182)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
#1.5 #001D090E4BBE003600000002000038E2007915DA69A8DB09#1234724439880#/Applications/ExchangeInfrastructure##com.sap.aii.utilxi.sld.XIIntegrationServer#J2EE_GUEST#13#####Application 23##0#0#Error#1#com.sap.aii.utilxi.sld.XIIntegrationServer#Java###Failed to create access client for SLD, central app server set to null
Thrown:
com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
at com.sap.lcr.api.cimclient.HttpRequestSender.newClientException(HttpRequestSender.java:710)
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:599)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:345)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:200)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:148)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:445)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:749)
at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:982)
at com.sap.aii.utilxi.sld.SldProxy.getInstances(SldProxy.java:380)
at com.sap.aii.utilxi.sld.SldProxy.getCentralAppServerHost(SldProxy.java:609)
at com.sap.aii.utilxi.sld.XIIntegrationServer.provideCentralAppServerHost(XIIntegrationServer.java:641)
at com.sap.aii.utilxi.sld.XIIntegrationServer.constructSldInstanceName(XIIntegrationServer.java:424)
at com.sap.aii.utilxi.sld.XISubSystem.getSldInstanceName(XISubSystem.java:1004)
at com.sap.aii.utilxi.sld.XIIntegrationServer.getSldInstanceName(XIIntegrationServer.java:672)
at com.sap.aii.utilxi.sld.XIIntegrationServer.readFromSld(XIIntegrationServer.java:229)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
at com.sap.aii.af.lib.sld.impl.SLDAccessor.getISData(SLDAccessor.java:248)
at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getISData(SLDAccessImpl.java:47)
at com.sap.aii.adapter.xi.ms.SLDReader.fire(SLDReader.java:79)
at com.sap.aii.adapter.xi.ms.SLDReader.run(SLDReader.java:182)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
#1.5 #001D090E4BBE003600000004000038E2007915DA69A8DB09#1234724439991#/Applications/ExchangeInfrastructure##com.sap.aii.utilxi.sld.XIIntegrationServer#J2EE_GUEST#13#####Application 23##0#0#Error#1#com.sap.aii.utilxi.sld.XIIntegrationServer#Java###Failed to create access client for SLD, central app server set to null
Thrown:
com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
at com.sap.lcr.api.cimclient.HttpRequestSender.newClientException(HttpRequestSender.java:710)
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:599)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:345)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:200)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:148)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:445)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:749)
at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:982)
at com.sap.aii.utilxi.sld.SldProxy.getInstances(SldProxy.java:380)
at com.sap.aii.utilxi.sld.SldProxy.getCentralAppServerHost(SldProxy.java:609)
at com.sap.aii.utilxi.sld.XIIntegrationServer.provideCentralAppServerHost(XIIntegrationServer.java:641)
at com.sap.aii.utilxi.sld.XIIntegrationServer.constructSldInstanceName(XIIntegrationServer.java:424)
at com.sap.aii.utilxi.sld.XISubSystem.getSldInstanceName(XISubSystem.java:1004)
at com.sap.aii.utilxi.sld.XIIntegrationServer.getSldInstanceName(XIIntegrationServer.java:672)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:124)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
at com.sap.aii.af.lib.sld.impl.SLDAccessor.getISData(SLDAccessor.java:248)
at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getISData(SLDAccessImpl.java:47)
at com.sap.aii.adapter.xi.ms.SLDReader.fire(SLDReader.java:79)
at com.sap.aii.adapter.xi.ms.SLDReader.run(SLDReader.java:182)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
#1.5 #001D090E4BBE002900000005000038E2007915DA69A96F79#1234724440265#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER##com.sap.aii.adapter.mail.service.XIMailAdapter.init(Channel,XIMailAdapterManager)#######System 26##0#0#Error#1#com.sap.aii.adapter.mail.service.XIMailAdapter#Java### failed to initialize the channel #2#:file_file:mail_receiver#com.sap.aii.af.sdk.xi.util.URI$MalformedURIException: invalid port number: imailchn.satyam.com#
#1.5 #001D090E4BBE00010000000100003AC0007915DA69909FE9#1234724476269#/Applications/DI/SDIC##com.sap.di.sdic.state.store.migration.support.SystemCopyInfo#######System 11##0#0#Info#1#com.sap.di.sdic.state.store.migration.support.SystemCopyInfo#Plain###SystemCopy folder not found under the system global folder /usr/sap/P7R/SYS/global.#
#1.5 #001D090E4BBE00010000000200003AC0007915DA69909FE9#1234724476301#/Applications/DI/SDIC##com.sap.di.sdic.srv.java.SDICServiceFrame#######System 11##0#0#Info#1#com.sap.di.sdic.srv.java.SDICServiceFrame#Plain###Successfully started SDIC service.#
#1.5 #001D090E4BBE00090000000200003AC0007915DA69A80049#1234724490690#/Applications/ExchangeInfrastructure/Security##com.sap.aii.security.SecurityServiceFrame.SecurityServiceFrame.getServiceProperties()#######System 34##0#0#Info#1#com.sap.aii.security.SecurityServiceFrame#Java###QUEUE_CONNECTION_FACTORY: , ERROR_QUEUE: , QUEUE: , JARM_PREFIX: , JARM_USER: , JARM_ENABLED: , CLEAN_INTERVAL: .#7#jmsfactory/default/QueueConnectionFactory#jmsqueues/default/MessageSecurityErrorQueue#jmsqueues/default/MessageSecurityQueue#XI:Security:#XISecurityUser#false#12#
#1.5 #001D090E4BBE00090000000300003AC0007915DA69A80049#1234724490690#/Applications/ExchangeInfrastructure/Security##com.sap.aii.security.SecurityServiceFrame.SecurityServiceFrame.getServiceProperties()#######System 34##0#0#Info#1#com.sap.aii.security.SecurityServiceFrame#Java###PROTECTION_DOMAIN: .#1#sap.com/com.sap.aii.adapter.soap.app#
#1.5 #001D090E4BBE00360000000000003AC0007915DA69A890D1#1234724491588#/Applications/ExchangeInfrastructure##com.sap.aii.utilxi.sld.XIIntegrationServer#J2EE_GUEST#13#####Application 43##0#0#Error#1#com.sap.aii.utilxi.sld.XIIntegrationServer#Java###Failed to create access client for SLD, central app server set to null
Regards,
Basker

27##0#0#Info#1#com.sap.di.sdic.state.store.migration.support.SystemCopyInfo#Plain###SystemCopy folder not found under the system global folder /usr/sap/P7R/SYS/global.#
Is that folder existing?
Markus

Problem in PI Java stack history.

Similar Messages

Maybe you are looking for