Problem in query jump from one sender and two receivers
Hello all,
My requirement is to jump from one query to another two queries. The sender comes from infoCube A and receivers comes from ODS B and ODS C (ODS C is a copy of ODS B). The problem is that when I execute the first jump a pop up appears with a selection date. This issue does not happen when I execute the second jump (and the selection date is needed). Target queries are identical, and I don´t know what is happening.
Any ideas?
Thanks in advance.
Carmen
Hi Carmen,
I think you have used the same variable for the day selection for the query on ODS C and ODS B. Hence when you fill it for the first time it does not ask you at the second instance.
Regards.
Similar Messages
-
Hi All,
I have a scenario in which there is only one outbound Message interface and 2 inbound message interfaces ( one sender and two receiver). In XI, how can i configure the interface determination for this? Shall i need to put * for receiver and add 2 inbound message interfaces and interface mappings.
Thanks
MichaelUse xpath in your interface determination in case you have some conditions, else u can *** multiple interfaces in your int. det.. also ref:
/people/suraj.sr/blog/2006/01/05/multiple-inbound-interfaces-within-a-service -
Can we have one sender and mutliple receivers in XI processing
Hello,
I will explain a scenario where you will have one sender channel and mutliple receiver channels.
There is a sender channel along with Sender Agreement where u mention the interface name and namespace.
There are two receiver channels along with two Receiver Agreements one for each with different interface names and namespaces also.
Now the processing is like this,
Sender sends some data and depending upon the agreements the corresponding receiver receives the data.
Will the process is correct or is there any other way to run the scenario?
Thanks,
PrakashHi Prakash chitti,
Of course the scenario that you were telling is possible.. Take the case of file-to-multiple file scenario, where single file sends the source xml and multiple receivers gets the file.. For that you need to have
1: one sender channel
2: two receiver channel
3: one sender agreement
4: two receiver agreement
5: One interface determiniation
6: One receiver determination
at the receiver determination, goto the tab 'Configured Receivers', and specify the number of recievers; and ensure they are present at the 'Configuraton overview for Receiver Determination'..
You can even set conditions for receiver determination from the source point..
This will help you.
Thanks
Vinod V
Help me with points -
Regarding 1 sender and 2 receivers
Hi,
i'm trying to do a scenario for 1 sender and 2 receivers.
but the receiver is again based on the condition like...if my id = 1 then receiver should be a if 2 then receiver is b.
please give me clear picture of the scenario.
i need starting from scratch like Data type to interface determination.
****full points are rewarded at the moment.****
No links please
Thanks,
MohanHi,
As u said that u have one sender and two receivers not to worry we can do it
In XI we have a concept called Context Object by which it is possible
Use
Context objects are a simple alternative to XPath expressions for accessing the contents of a message. Take the following message instance as an example:
<InvoiceOut>
<customerData>
<address>
<name> ... </name>
<postalCode> ...</postalCode>
</address>
</customerData>
</InvoiceOut>
To access the content of the <postalCode> field, you would use the following expression in XPath:
/InvoiceOut/customerData/address/postalCode
If you needed this expression in more than one condition, you would have to rewrite or copy it each time. Instead, you can assign a context object to the <postalCode> field, for example with the name postalCode. You can then use the postalCode context object in all conditions where you need the value of the <postalCode> field, which makes the conditions easier to read.
/people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
in the context object we can give condition depending upon it the receivers are activated b/w 2 recv
if found worth pls do the req
Thanx
Sampath -
One Sender system and two receivers system scenario. Pls help
Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
Pls tell me and send me links/docs for this scenario.
RegardsHi Rick,
For two receivers you require 2 interface determination, receivers determinations etc.
Go through these threads for one sender and multiple receivers:
one sender and two receiver
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
Then configure your RFC communication channel in XI system + activate it and after that using all same parameters make an TCP/IP RFC destinatioon on R3 side.
Rewrads if found helpful.
BR,
Alok -
My ipod jumps from one screen / app to another on it's own. Sometimes I can't unlock or even shut off. I've tried the reset, I've tried back up, even tried restoring to factory settings and is still having problem. Any ideas of what I can do.
When you still have the problem after restoring to factory defaults/new iPod then you very likely have a hardware problem and an appointment a th Genius Bar of an Apple store is in order.
-
Really weird problem -- won't download mail from one sender
I'm having a really weird problem. Apple Mail won't retrieve mail from my Gmail account via POP3 from one sender only. All other mail is downloaded normally, except from a particular sender. What could be causing this? Thanks.
I am trying to remember and research something about the Junk filter and Gmail accounts. Have you checked in your Junk mailbox, if Junk in enabled and there is a separate Junk mailbox?
If you click on my name to the left, and look in the bio line of the resulting Profile, you will find an email address you can reach me with. If you email me at that address, I will send you a Gmail address that your sender can test sending a message to me at my Gmail account.
Ernie -
Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another cannot operate the ipad at all, tried switching off and back on again, also restored the ipad but of no use
try restart
http://support.apple.com/kb/HT1430 -
my ipad automatically jumps from one app to other. it automatically types things randomly. i dont know what it wrong. Have shown it in a service center. they have done factory reset but problem still persist.
Likley a defective touchscreen.
-
Send PO from one system and create a SO in another system
Hello Gurus
ii am learning ALE IDOC and would like to do a complete hands on practice. I have been doing some basic scenarios and so far i am progressing well.
What i am planning to do:
Now i would like to do an end to end scenairo of sending a PO idoc from one system and this should create a SO in the other system.
Steps i am planning to do:
1). Configure the sending system for a outbound PO idoc
2). Configure the receiving system for a Inbound SO idoc
3). Maintain VOE2(EDPAR) and VOE4(EDSDC) tables for partner information and organization information respectively.
Questions:
1). Am i missing any steps?
2). I am confused on what to maintain in VOE2 and VOE4. Which information of PO should i maintin in VOE2 and VOE4 in the receiving system?
~SureshHi Suresh,
this might be of some help.
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
kindly reward if helpful.
cheers,
Hema. -
Images do not display at placeholder location from one sender.
When I receive emails with images from one sender, who uses a tablet, the headings appear in a list then there are placeholders for each image and then the images show with only an ID for each image.
This one sender is the only one I have seen this happen to.
When i download and open the email in Outlook it works OK.To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates. -
Problem in Query jump (RRI)
Hello Gurus,
I have created Query Jump (RRI) using Transaction RSBBS.
I have assign 3 query.In Development its working fine one can jump from one query to another,my problme is that after transport this query jump links are missing although query are working properly but Query jump link is missing.Is some thing addictional need to be done for Query Jump (RRI),please suggest.
Thanks & Regards,Hi Wajid
How you have collected the transport. Please follow the procedure given below
RSA1-> Transport Connection - >Object Types -> Report-Report Interface -> Collect the transport and assign it to transport request .
Hope this helps
Regards
Pradip
(Don't forget to assign points) -
IPads jumping from one SSID to another?
Hello,
One of my customers is experiencing this problem, their iPads are jumping from one SSID to another causing intermittence in the service. There are 3 SSIDs, two with WEP and one more open.
This are AP and IOS versions
c1130-k9w7-mx.124-25d.JA
Thanks!When you deploy wireless, on of the biggest problems is no control over wireless profiles. There is nothing you can do on the AP. If the user has added all three SSIDs, well that means the device has a choice of what SSID it wants to connect to. The only way to prevent the issue you are having is to only have the iPad users connect to one SSID. It might be training of users to let them k ow what they can and shouldn't do. Maybe not broadcasting the SSID is what you need to do so these devices don't automatically join networks.
Sent from my iPhone -
Need to use only one sender and receiver communication channel.
Hello Experts.
I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
For Eg;
Sender
D://dir1/file1 ---> E://dir1/File1
F://dir2/file2 ----> G://dir2/file2
H://dir3/file3-----> I://dir3/file3.
Can this be achieved by using pass through scenario?
Please let me know if the requirement is not clear.
Thanks in advance.
Advit RameshHi Advit,
I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
For Polling from multiple directories:
http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
Dynamic Configuration:
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki -
I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another? Any help will be appreciated. Thank you.
This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
https://discussions.apple.com/docs/DOC-4141
Maybe you are looking for
-
I am trying to update my software on my iPad. I am synched to my MacBookPro and I have been instructed to click the " Summary button". Where is it?
-
How can I connect a keyboard Roland E86 to GarageBand 6.0.4?
How can I connect a keyboard Roland E86 to GarageBand 6.0.4?
-
Oracle 11.2.0.2 for Windows
Can you please tell me when Oracle 11.2.0.2 will be reeased for Windows? Oracle released patchset for 11.2.0.2 for windows but I don't see the actual database of this version to download. Thanks Edited by: user2486753 on Apr 19, 2011 4:48 PM
-
I have just bought a mac book pro and when i go to the Ap store none of my previous downloads to my ipad and phone are there, why?
-
I recently applied NVIDIA Texture Tools (http://developer.nvidia.com/nvidia-texture-tools-adobe-photoshop) which allows the exportation of .DDS files. My problem arises when I try to actually save my project as a DDS its say "..because of an error".