Problem in reading the userid from ws-security

Hi
I have an ESB with two processes 1.Synchronous 2.Asynchronous.
In both the processes i do some transformation and invoke the web services.
First i invoke a synchronous process by posting the XML data with the WS-Security information(useid/password).I get the userID value using below XPath in the XSL
"ehdr:getRequestHeader'//soap:Header/wsse:Security/wsse:UsernameToken/wsse:Username','wsse=http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd; soap=http://schemas.xmlsoap.org/soap/envelope/;')"
after getting the response from this synchronous process,my asynchronous process will be invoked automatically.
The problem here is,i am getting the userId value as null in the asynchronous process filter xsl with the same above Xpath.Can any one help me on this.
thanks in advance.

what soa suite version are you using?
there are some issues on setting
passThruHeaders=true
to make sure esb is actually propagating header, when transformations are done in ESB layer.
Should be fixed in 10.1.3.4

Similar Messages

Problem in reading the FROM_TIME from CRMD_SCHEDLIN

HI ,
I have problem in reading the dates from the table CRMD_SCHEDLIN .
what I have noticed is that if the date is stored as 2004.11.14 23:00:00 then in the display of the sales order Tx-CRMD_BUS2000115 the date is shown as one plus the date stored ie in this case the date will be shown as 2004.11.15 but in some cases it is shown as same .
So I am not able make a clear distinction when to show this date as stored and when to add one more to this date while showing the dates for each items.
It would be nice if some one can advise me on some FM which can read these dates correctly as shown in the TX CRMD_BUS2000115.
Thanks in advance .
Regards,
Ankur

Hello Ankur,
If you make a 'where used list' on this function, you will see that this parameter is never used in the standard. You will always see something like :
CALL FUNCTION 'CRM_SCHEDLIN_CONVERT_TZTF_IO'
EXPORTING
IV_FROM_TIME     = LS_SCHEDLIN_WRK-FROM_TIME
IV_FROM_TIMEZONE = LS_SCHEDLIN_WRK-FROM_TIMEZONE
IV_TO_TIME       = LS_SCHEDLIN_WRK-TO_TIME
IV_TO_TIMEZONE   = LS_SCHEDLIN_WRK-TO_TIMEZONE
IMPORTING
EV_FROM_IO       = LS_SCHEDLIN_WRK-FROM_TIME_IO
EV_TO_IO         = LS_SCHEDLIN_WRK-TO_TIME_IO.
So I think you can do the same.
Regards,
Frédéric

Problem while reading the file from FTP server

Hi Friends,
I have a problem while fetching files from FTP server.
I used FTP_Connect, FTP_COMMAND function modules. I can able to put the files into FTP server.
but I cant able to pick the files from FTP server.
anyone have faced similar issues kindly let me know.
Thanks
Gowrishankar

Hi,
try this way..
for reading the file using FTP you need to use different unix command ..
Prabhuda

I would like to know that my lightroom 5 has suddenly stopped working... whenever i am launching it it is showing that lightroom has ecncountered a problem in reading the photos from its cache..plzz help me to slove this problm... as soon as possible..

it is shwing that it has ebcountered an eror from reading from its preview cache and needs to qiut...
after re-instalation also it i still showing the same thing... plzz help me.

That error message indicates that your preview cache files have become corrupt. This is not a critical problem to solve. Just delete the previews file it carries the same name as your catalog file with the extension ending "Previews.LRDATA" see the screen capture. Delete this file and when you next restart Lightroom it will rebuild the previews.
The link below will let you know where the file is located.
Preference and other file locations | Lightroom 4

Problem in reading the JDK1.4Logger configuration file from java prog

I have written a java program and want to log the messages in a log file , I'm using commons logging with JDK1.4logger as logging subsystem .
I am facing the problem in reading the JDK1.4Logger configuration file which is commons-logging .properties file from my java program as a result my log messages are appearing directly on the screen while I try to run program , during compilation no error is shown . I have tried to set java.util.logging.config.file ="Path of my commons-logging .properties file " by setting system properties also.
Please suggest the appropriate solution for this .

Some webservers won't recognise the resource bundle provided in message-resources
In that case, you need to specify that resource bundle information in web.xml at the time of specifying the action servlet like this. Check for the init-param application.
<servlet>
    <servlet-name>action</servlet-name>
    <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
    <init-param>
      <param-name>application</param-name>
      <param-value>resource.ApplicationResource</param-value>
    </init-param>
    <init-param>
      <param-name>config</param-name>
      <param-value>/WEB-INF/struts-config.xml</param-value>
    </init-param>
    <init-param>
      <param-name>debug</param-name>
      <param-value>2</param-value>
    </init-param>
    <init-param>
      <param-name>detail</param-name>
      <param-value>2</param-value>
    </init-param>
    <init-param>
      <param-name>validate</param-name>
      <param-value>true</param-value>
    </init-param>
    <load-on-startup>2</load-on-startup>
</servlet>In this, the drawback is, you can not specify the key for your resource bundle. In the JSP, you have to access the property like this.
<bean:message key="label.fName"/>

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication.
I use LabVIEW to read the data from serial communication then, i open the example (.vi) from Serial Communication - Advanced Serial Write and Read from LabVIEW Example. BUT it have some error message that : Error - 1073807202 occured at property node in visa configure serial port (instr).vi -> advance serial write and read .vi
this error code is undefined. no one has provide a description for this code, or you might have wired a number that is not an error code to the error code input.
I don't know why? please help me. thank you.

When I copy that code into "Explain Error" I get: "VISA: (Hex 0xBFFF009E) A code library required by VISA could not be located or loaded."
You may have a bad install of VISA or the wrong version of VISA loaded. Try re-installing VISA. You can get the latest version from the NI support site: http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=1....
Also ensure that you are not pointing the example towards a serial port that does not exist.
Please let us know what you find and what gets this working for you.
Rob

Problem in reading the modified text from text editor

Hi all,
Im using text editor for saving the long text entered in the text editor as standard text in So10 tcode.
Here im facing an issue in reading the text from text editor. That is, when the text is entered by the user for first time, then the below method reads the text successfully.   But when i do some changes in the existing text present in the text editor and try to read, then the modified text is not returned by the below method.
I use the "CALL METHOD g_editor_ftext1->get_text_as_stream" to read the text. Given below is my code.
CALL METHOD g_editor_ftext1->get_text_as_stream
   IMPORTING
      text                   = ig_text_table
      is_modified            = g_xthead_updkz
    EXCEPTIONS
      error_dp               = 1
      error_cntl_call_method = 2
      OTHERS                 = 3.
The return value of "is_modified" is always returned as 0.
Could anyone pls help how to read the modified text using the above method?

Check if this works and if it works then there should be some mistake in your coding
REPORT abc.
PARAMETERS:pa1 TYPE bwart.
DATA: container TYPE REF TO cl_gui_docking_container,
      editor    TYPE REF TO cl_gui_textedit,
      report    TYPE syrepid,
      mod TYPE i,
      modon TYPE i.
DATA:tlines    TYPE TABLE OF tdline,
     wa_tlines TYPE tdline.
AT SELECTION-SCREEN OUTPUT.
report = sy-repid.
IF container IS INITIAL.
    CREATE OBJECT container
                 EXPORTING repid     = report
                           dynnr     = sy-dynnr
                           side      = container->dock_at_left
                           extension = 1070.
    CREATE OBJECT editor
                EXPORTING
                     parent     = container.
ENDIF.
wa_tlines = 'This is test before a change'.
APPEND wa_tlines TO tlines.
CALL METHOD editor->set_text_as_r3table
     EXPORTING
           table              = tlines
     EXCEPTIONS
           OTHERS             = 1.
CALL METHOD editor->go_to_line( 1 ).
START-OF-SELECTION.
CLEAR tlines[].
CALL METHOD editor->get_text_as_stream
            EXPORTING
            only_when_modified = '1'
            IMPORTING
            text = tlines
            is_modified = modon
            EXCEPTIONS
            error_dp = 1
              error_cntl_call_method = 2
              OTHERS = 3.
IF modon = 1.
    WRITE 'Changed'.
ELSE.
    WRITE 'Not changed'.
ENDIF.
WRITE modon.

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

Problem on reading and writing from from a *.txt file

I get Problem on reading and writing from from a *.txt file. The following is the read() method...
The software said the DataInputStream is depreciated. Can anyone help me please?
public void read()
    File file = new File("C://Documents and Settings//Charles//My Documents//Brunel//EE2065//Assignment and Lab//Assignment 4 and Lab 4//data.txt");
    FileInputStream in = null;
    String str = "";
    try
      in = new BufferedReader(file);
      //in = new FileInputStream(file);
      for(;;)
        str = new BufferedReader(in).readLine();
        //str = new DataInputStream(in).readLine();
        if(str == null)
          break;
        System.out.print(str);
    in.close();
    catch(IOException e)
        System.err.println("execution error: " +e);
}

Thank you for your reply. I have made some change. However, there is an incompetable type found error.
in = new BufferedReader(new InputStreamReader(in));The following are all of the code.
public void read()
    File file = new File("C://Documents and Settings//Charles//My Documents//Brunel//EE2065//Assignment and Lab//Assignment 4 and Lab 4//data.txt");
    FileInputStream in = null;
    //BufferedReader in = null;
    String str = "";
    try
      in = new BufferedReader(new InputStreamReader(in));
      //in = new FileInputStream(file);
      for(;;)
        BufferedReader Bstr = new BufferedReader(new InputStreamReader(in));
        //str = new BufferedReader(in).readLine();
        //str = new DataInputStream(in).readLine();
        if(str == null)
          break;
        System.out.print(str);
    in.close();
    catch(IOException e)
        System.err.println("execution error: " +e);

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

Regarding reading the data from the files without using Stremas

hai to all of u...
here i have a problem where i have to read the data from the files without using any streams.
please guide me how to do this one,if possible by giving with an example
Thanks & Regard
M.Ramakrishna

Simply put, you can't.
By why do you need to?

Problem while reading XML file from Aplication server(Al11)

Hi Experts
I am facing a problem while reading XML file from Aplication server using open data set.
OPEN DATASET v_dsn IN BINARY MODE FOR INPUT.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET v_dsn INTO v_rec.
WHILE sy-subrc <> 0.
ENDWHILE.
CLOSE DATASET v_dsn.
The XML file contains the details from an IDOC number , the expected output is XML file giving all the segments details in a single page and send the user in lotus note as an attachment, But in the present output after opening the attachment i am getting a single XML file which contains most of the segments ,but in the bottom part it is giving the below error .
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/SHPORD_0080005842.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
for all the xml its giving the error in bottom part , but once we open the source code and if we saved in system without changing anything the file giving the xml file without any error in that .
could any one can help to solve this issue .

Hi Oliver
Thanx for your reply.
see the latest output
- <E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/~1922011.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
E1EDT13 with QUALF>003 and <E1EDT13 SEGMENT="1">
with <QUALF>001 having almost same segment data . but E1EDT13 with QUALF>003 is populating all segment data
properly ,but E1EDT13 with QUALF>001 is giving in between.

Facing a Problem while downloading the data from ALV Grid to Excel Sheet

Hi Friends,
Iam facing a problem while downloading the data from ALV Grid to excel sheet. This is working fine in Development server , when comes to Quality and Production servers I have this trouble.
   I have nearly 11 fields in ALV Grid and out of which one is PO number of length 10 , all the ten numbers are visible in the excel sheet if we download it from development server but when we download it from Quality or Production it is showing only 9 numbers.
Can any one help me out in this case.

hi...
if this problems happens dont display the same internal as u finally got.
just create new internal table without calling any standard data elements and domains... but the new internal table s similar like ur final internal table and move all the values to new int table.
for eg.
ur final internal int table for disp,
     data : begin of itab occur 0,
                    matnr like mara-matnr,
               end of itab.
create new like this,
           data : begin of itab occur 0,
                    matnr(12) type N,
               end of itab.

Problem in downlaoding the attachment from the transaction iw33

Hi experts ,
I am facing problem in downlaoding the attachment from the transaction iw33 where we have attached a presentation.
when i tried to debug it at the function module GUI_DOWNLOAD its returning sy-subrc = 5 which is no authorization .
there is some problem with the user authorizations as the same thing is working fine with other SAP user account .

It was an authorisation problem .

Problem in retriving the realpath from the servlet

Hai All,
I am facing problem in retriving the realpath from the servlet.
I am using the following code in order to retrieve the path.
String prefix = getServletContext().getRealPath("/WEB-INF/classes");
The value returned from above code is null.
I am using Weblogic 8.1 server, and deploying my servlet as WAR file inside
the weblogic server.
Is this the problem with the weblogic server or with the code. Is there any way to over come this.
I need the path as i am implementing Log4j for the servlet and i have to pass the
configuration file in one of the function "PropertyConfigurator.configure(file);"
where the file should include complete path.
My configuration file is in WEB-INF/Classes directory.
Any help is appreciated.
Thanks in advance
Pooja.

String realPath = request.getRealPath(request.getContextPath());
That should return the path up to where you have your servlet context.

Problem in reading the userid from ws-security

Similar Messages

Maybe you are looking for