Problem in refreshing the data of the UI element Table

Hi Experts,
I am having a problem.
I have a screen which displays list of variants in table ( variant name , variant desc )
I am binding the entries of table in WDDOINIT method.
but when i go back to selection screen view and come back to display variants view, WDDOINIT is not triggering.
Now if i move the code written in WDDOINIT method to WDDOMODIFYVIEW method, its not retaining the lead selection as the binding happens on every server round trip. if i check with First_time = 'X'. its same as that of having it in WDDOINIT method.
How do i overcome this problem of refreshing the table data.
any clue is highly appreciated.
Regards,
Ajay

hi Ajay ,
create a custom controller for this and when u want to move from selection screen view to display variant ,
call method of this custom controller
DATA lo_edit TYPE REF TO ig_edit .
lo_edit = wd_this->get_edit_ctr( ).
lo_edit->edit1(
here I am calling the edit1 method of my custom controller named EDIT.
try to move code of ur WDDOINIT here.
it shud help
rgds,
amit

Similar Messages

Problem while refreshing the data for the second time using excel services in sharepoint 2013...

Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.Meenakshi

I am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi

The problem here is i am not able to get the data from the list

hi all,
i have the following code
EnrichedProductCatalogue enrichedProductCatalogue1 = new EnrichedProductCatalogue();
enrichedProductCatalogue1.setAssetCount(2);
enrichedProductCatalogue1.setBlockingProduct("Weekend Freebee");
enrichedProductCatalogue1.setBlockingReason("Compatability");
ArrayList<String> availableActionsList = new ArrayList<String>();
availableActionsList.add(EnrichedProductConstants.ADD.toString());
availableActionsList.add(EnrichedProductConstants.REMOVE.toString());
enrichedProductCatalogue1.setAvailaibleActions((ArrayList<String>)availableActionsList);
BundleProduct bundleProduct = null;
Product product = new Product();
product = new Product();
product.setProductName("International");
product.setProductClassName("International");
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);
bundleProduct = new BundleProduct();
bundleProduct.setCommercialProduct(product);
enrichedProductCatalogue1.setBundleProduct(bundleProduct);
listOfEnrichProducts.add(enrichedProductCatalogue1);
listOfEnrichProducts.add(enrichedProductCatalogue1);
here i have an list called listOfEnrichProducts.
here i am adding two objects of enrichedProductCatalogue.
which contains a object called BundleProduct.
which has a reference for Product class.
here this product class has a list which contains objects of another class called UiCategory.
the problem here is i am not able to get the data from the list which contains UiCategory objects .
the following is the UI
<af:table var="row" rowBandingInterval="0" id="t1"
value="#{pageFlowScope.sample1}"
binding="#{pageFlowScope.sampleManagedBean.dataTable}"
partialTriggers="apimethods ::apimethods">
<af:column sortable="false" headerText="ProductName" id="c2">
<af:outputText value="#{row.bundleProduct.commercialProduct.productName}" id="ot15"/>
</af:column>
<af:column sortable="false" headerText="ProductClass" id="c12">
<af:outputText value="#{row.bundleProduct.commercialProduct.productClassName}" id="ot19"/>
</af:column>

<af:column sortable="false" headerText="AssetCount" id="c22">
<af:outputText value="#{row.assetCount}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="blockingReason" id="c3">
<af:outputText value="#{row.blockingReason}" id="ot2"/>
</af:column>
<af:column sortable="false" headerText="blockingProduct" id="c4">
<af:outputText value="#{row.blockingProduct}" id="ot3"/>
</af:column>

</af:table>
Can anyone pls give some solution ...

Hi Frank,
value="#{pageFlowScope.sample1}"
here sample is
Map<String, Object> flowScope1 =
ADFContext.getCurrent().getPageFlowScope();
flowScope.put("sample1", listOfEnrichProducts);
this is not the problem . i am able to get all the values except the following .
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

Jonas,
I think what you want is a 3D plot of a cylinder. I have attached an example using a parametric 3D plot.
You will probably want to duplicate the points for the first theta value to close the cylinder. I'm not sure what properties of the graph can be manipulated to make it easier to see.
Bruce
Bruce Ammons
Ammons Engineering
Attachments:
Cylinder_Plot_3D.vi ‏76 KB

Hi I have iPhone 4 with iOS 6 and a week ago I stop ressiv or send SMS. I tried everything but I still can't send.. I erase the version and all the data on the iPhone and now I can send SMS. But when I'm downloading my buck up the problem happened againI'

Hi I have iPhone 4 with iOS 6 and a week ago I stop ressiv or send SMS. I tried everything but I still can't send.. I erase the version and all the data on the iPhone and now I can send SMS. But when I'm downloading my buck up the problem happened again
Please help me cuse I don't know what to do and my cellular company don't have an answer
Thank u

I have to ad that its not an easy problem I did all the action in the book.
It's something with my back up

How can EBS 12.1.3 upgraded from 11.5.10 be refreshed with data from the live 11.5.10

Hello Gurus,
Early this year we upgraded an 11i EBS system to a 12.1.3 for testing and now accounting wants the data in the new 12i system to be refreshed with the most recent data from PROD (11i). Is this possible wihtout going through the entire upgrade process?
Thanks
Mathias

Hi Mathias,
For details about this concurrent program, please refer to:
SLA: Upgrade Historical Subledger Transaction Accounting Program (XLAONDEUPG) (Doc ID 1376752.1)
R12.0 and R12.1: FAQ for the SLA Upgrade: SLA Pre-Upgrade, Post-Upgrade, and Hot Patch (Doc ID 604893.1)
New Functionality for SLA Upgrade Process for R12.1.2 (Doc ID 980112.1)
What Do You Need To Know For A Successful Upgrade Of Oracle Payables? [VIDEO] (Doc ID 1471844.1)
Thanks,
Hussein

Could not see the data in the report

Hi,
BOXI R3.1 is intalled newly in my sytem.Through Infoview,when i refresh a new report, though data is getting into the report ,I am not able to see the data in the report plus the Header color is blue and the rest of the row colors are displaying as yellow.
when I am logging in another machine i am able to see the data.Please help me in solving this issue.
Thanks in Advance.
Regards,
Spandana.

Spandana,
As suggested, JVM is problem. You can find out it at Control Panel == Java (Double-click) General tab == About button (See the build version) (build 1.6.0_20-b02). So you have to choose below 20 (I prefer 17).
Alternatively, You might have several Java's running on your machine. Uninstall all Java versions and start developing reports or Editing any existing reports, now BO will prompt for you to install JVM, Run it, Now the problem is solved.
Hope it should solves the issue.
If you want to see the data:(now with yellow & blue)
Select Column == properties == Read cell content as, change it to HTML.
Thank You!!
Sent from iPhone

How to execute the data in the form when the data is already avaliable

Hi,
I am working with forms 6i. I have a problem while executing the data in the form
Actually, the data is already present in the form. But when i run the form, the data is not displayed.
can anyone please help me how to execute the data. below is the code
Set_Alert_Property(alert_id,ALERT_MESSAGE_TEXT,'Do you want to refresh new Data for that Year and Field ? (it will take a time).') ;
               SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON1, LABEL, 'Yes');
               SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON2, LABEL, 'No');
               SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON3, LABEL, 'Cancel');
               button_number :=Show_Alert(alert_id) ;
               synchronize;
               if button_number != ALERT_BUTTON3 then
                    if button_number = ALERT_BUTTON1 then
                         :param.field := :control.f_cd;
                         :param.year := :control.year;
                         build_tables;
                         fields;
-- areas(:param.field);
                         PUT_PARAM;
                         COMMIT_FORM;
                    go_block('wet_criterias');
                    end if;
                    if button_number = ALERT_BUTTON2 then
                         :exhibits.field_display := :control.f_name || ' - Exhibits';
                         go_block('RESERVOIR');
                         execute_query;
                    end if;
               end if;
          end if;
else
     message('Fields must be entered...');
end if;
else
message('Fields must be entered...');
end if;

It's hard to know what logic you are trying to implement.
However, by looking at your code, it seems that if the user select 'Yes' to the question "Do you want to refresh", nothing is done except the go_block('wet_criterias'). Should there be an 'Execute_Query' ?
No idea...

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

Could not see the data in the cube

Hi all,
Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new) which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
Can anyone plz help me out.
Thanks in advance.
Thanks,
Preethi.

Hi Balu,
I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
Hope its clear.
Thanks,
Preethi.

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Can I select the data of the indexes?

Hi everybody,
Oracle storages indexes in index type segments as I know.
Is it possible to see the data of these index segments like a table or view?
So I would like to see not only the structue of it with:
select * from dba_segments SG where SG.segment_name = ’index_name’
I think something like this:
For example if I have a table named Table1.
(please don’t see the format of the rowid):
Rowid....field1
1_1.......AA
1_2.......AB
1_3.......BB
and I have an index on field1 named ndx_t1_f1.
Create index ndx_t1_f1 on Table1(field1);
I would like to see something like this
(if it is a simple Btree index like the ndx_t1_f1):
Select * from some_schema.???ndx_t1_f1???
Rowid..........ParentRowid..........ValuePrefix..........SolutionRowid
2_1
2_11............2_1.......................A
2_12............2_1.......................B
2_111..........2_11.....................AA......................1_1
2_112..........2_11.....................AB......................1_2
2_121..........2_12.....................BB......................1_3
And if i run:
select field1 from table1 where filed1 like 'B%'
oracle can use ndx_t1_f1 index like this:
2_1 -> 2_12 -> 2_121 -> BB
Yes, I know, there are some promlems with this imagine, but is it possible, or is it a silly question?
Thanx: lados.

Hi,
You asked: „Why do you want to do that?”
Well, I have a table T with fields F1, F2, F3 ...
If I run:
select F2, T.* from T where F1=12345;
the result is one record and the value of F2 is ‘A’.
But if I run:
select F2, F1 from T where F1=12345;
the result is one record and the value of F2 is ‘B’.
And this is the same record. Oppps!!!!!
I think the cause of the problem is the next:
I have an index on F1, F2 named ndx_T_F1_F2
In the second case: oracle uses only the index blocks and no table blocks, because all asked data exists in the index blocks.
In the first case: oracle uses the table blocks too, because I asked all field.
And I think there is a corrupted data on the index.
I created a new index on (F1,F2,F3), and I suggest to use this.
select /*+index(T, ndx_T_F1_F2_F3)*/ T.F2 from T where F1=12345;
the result is one record and the value of F2 is ‘A’.
But what is strange, oracle didn’t realise this inconsistent situation.
(It could be an earlier crash, I don’t know, I’m new at this workplace)
I think, the problem can solve with recreating the index ndx_T_F1_F2.
But it’s a very special situation for me, and I would like to see the corrupted data concretly with my eyes.
I think, that
Select * from some_schema.???ndx_t1_f1???
would I see like a view, but it would based on procedures and not tables.
It would be enough to me, because I only could see the data in the index.
But it is impossible as you wrote, isn’t it?
Thanx: lados.

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

How can I select a radio button in a table regarding the data in the cells?

Hi everyone
This is the issue: I need to select the RadioButton which is in a table with data related to transfers in the cells next to it, so I need to select the correct radio regarding the data next to it.
This is the whole process: First I go to the Add Recurring Transfer section and select the parameters of the transfer (Accounts, date, amount, months etc), then with VB code I capture those parameters from the page and store them into Global variables for further usage on my E-tester script.
Right after that I need to select the radiobutton regarding the data of the transfer that I already created in order to delete it or modify it (Please see Attachment selectradio1.jpg)
So How can I move along the table and compare each cell with the variables that I created with the transfer information, so when I finish comparing a row cell by cell and if all the comparison match well in that row, I could select the radiobutton of the row.
Note: Second Attachment selectradio2.jpg shows the source code of the table...If you need more info please let me know
Could you please help me with this problem?? I'm Kind of frustrated with this issue jejeje

Here is an example. I uploaded mock html so that you can actually try this code. I think this does exactly what you are asking.
Private Sub RSWVBAPage_afterPlay()
Dim tbl As HTMLTable
Dim tblRow As HTMLTableRow
Dim tblCell As HTMLTableCell
Dim strValue As String
Dim rButton As HTMLInputElement
' ******** This would be your global variable. I put this so that values are seperated by a semicolin you can use what ever format works for you.
strValue = "03/22/2008;03/22/2008;*************1977;*************1977;$25.25;Jan, Jun, Jul, Dec"
' Strip out the ; for inner text comparison
strValue = Replace(strValue, ";", "")
' This will get the table but can be modifoed to be more specific
Set tbl = RSWApp.om.FindElement(, "TABLE")
' This loops through all the rows in the table until a match to the strValue is found
' then clicks the radio button. Findelements allows you to specify a root element
' once the correct root row is found, FindElemets can get the correct radio button
For Each tblRow In tbl.rows
  If tblRow.innerText = strValue Then
    Set rButton = RSWApp.om.FindElement("account", "INPUT", "NAME", , , tblRow)
     rButton.click
   End If
Next
End Sub
I also uploaded the script I created. You should be able to run it and see how it works.
This should get you going.

I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it. I am gettting the data from rs232 interms of 0 or 1. and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

I have attatched the vi. Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off. suppose if 0 comes the corresponding data status is wrtten into the text file. But here the problem is the same data will be printed many number of times. so i have to make it like if there is a transition from 1 to o then only print it once. how to do it. I am doing this from few weeks please reply if you know the answer immediatly
thanking you
Attachments:
MOTORTESTJIG.vi ‏729 KB

Problem in refreshing the data of the UI element Table

Similar Messages

Maybe you are looking for