Problem in Reports. Pl. Respond.

I want to generate a report in Reports 2.5. The report is such
that it will be based on multiple queries. Say first one query ,
Q1, will fetch some data. Based on Q1 some records will be
generated. Then Q1 and these newly generated records will be the
base of second query, Q2. And report will be based on Q2.
I am unable to generate this query.
Please Help and suggest some way to do this.
and please be specific while suggesting something.
null

Hi,
There are no such limitations with Reports. If I understand properly, you run the Report twice, in each run, you are trying to execute different query, and you generate two dilimited Reports output files? This should work fine. Try out the latest Reports 6i patch-10 for this. You can even approach Oracle Support with your testcase. FYI, with Reports 6i patch-11, a new feature "dlimited data" is introduced which will give delimited output with a data dump i.e it would not be dependent upon the Reports layout. You can probably try out this new feature also.
Thanks,
Rohit Hi Rohit,
Thanks for the information.
well I am generating single output file on each run .
the problem is somewhat funny.
I have build query2 in data model after query1.
query 1 is giving me correct output both in .PDF and delimiter version.
But query2 is giving me 0 byte file for delimiter version although in .PDF it is running fine.
When I took out query2 to another module it is running fine for both.
I hope this make sense.
Moreover if u still not clear about the problem and thinks that u can help me out please send me ur mail id so that I can send you the RDF copy.
Thanks
Mohit...

Similar Messages

What is happening when firefox reports (Not Responding)?

More often than I'd like (at least a dozen times per day) Firefox goes non-responsive and reports (Not Responding) in the banner. (In fact it happened while I was trying to access this page!)
Does mozilla have any tools/add-ons that I could install that Firefox could activate when this happens to try to diagnose the problem? i.e. when the banner is updated to display (Not Responding), could firefox also do things like:
- ICMP ping the proxy server (if there is one) to see if it is a local network problem.
- ICMP ping the destination website in question to check end-to-end network latency.
- setup an HTTP connection (wget?) to the proxy server (if there is one) to see if the proxy server is the bottleneck?
- setup an HHTP connection(wget?) to the destination website to measure the response time for a new connection?
Etc.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
There is also security software (firewalls) that can cause such issues, so you may need to look there as well.

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Problem refreshing reports with params in the Interactive viewer from ASP

I have a problem getting reports to refresh by clicking the Interactive Viewer's refresh button and reusing the supplied parameters. I am seeing this exact same problem on both V9.2 and 11.5 unmanaged RAS servers.
I am using the following function code to set the reports parameters:
Public Sub PassParameter(param_index, param_value, param_is_multi,param_range_kind)
    Dim param_old ' parameter field in the report
    Dim param_new ' parameter field that will replace old parameter
Dim paramValue ' discrete parameter value
Dim aValues
Dim rValues
Dim iLoop
Set param_old = clientDoc.DataDefinition.ParameterFields.Item(param_index)
Set param_new = objFactory.CreateObject("CrystalReports.ParameterField";)
If param_range_kind = 1 then
Set paramValue = objFactory.CreateObject("CrystalReports.ParameterFieldDiscreteValue";)
paramValue.Value = param_value
else
Set paramValue = objFactory.CreateObject("CrystalReports.ParameterFieldRangeValue";)
     rValues = split(param_value, "|")
paramValue.BeginValue = rValues(0)
paramValue.EndValue = rValues(1)
paramValue.LowerBoundType = 2
paramValue.UpperBoundType = 2
end if
param_old.CopyTo param_new
if param_is_multi = 0 then
param_new.CurrentValues.Add paramValue
else
     aValues = split(param_value, ",")
   For iLoop = LBound(aValues) to UBound(aValues)
param_new.CurrentValues.Add Trim(aValues(iLoop))
    Next
end if
clientDoc.DataDefController.ParameterFieldController.Modify param_old, param_new
    ' Clean up
    Set paramValue = Nothing
    Set param_new = Nothing
End Sub
and then redirecting to another ASP page to invoke the viewer (the report "clientDoc" object is passed to the viewer asp page a s a session variable). The code of the viewer page is:
<%
Response.ExpiresAbsolute = Now() - 1
Response.Charset=";UTF-8"
Dim clientDoc
Set clientDoc = session("clientDoc")
Dim ObjFactory, RptAppSession
Set ObjFactory = CreateObject("CrystalReports.ObjectFactory";)
Dim viewer
Set viewer = ObjFactory.CreateObject("CrystalReports.CrystalReportInteractiveViewer";)
viewer.PageTitle = "Interactive Report - " & Request("rptnam")
viewer.IsOwnForm = true
viewer.IsOwnPage = true
viewer.HasRefreshButton = true
viewer.EnableParameterPrompt = false
viewer.ReuseParameterValuesOnRefresh ; = true
viewer.HasExportButton = false
' viewer.HasPrintButton = false
viewer.ReportSource = clientDoc.ReportSource
Dim BooleanSearchControl
Set BooleanSearchControl = ObjFactory.CreateObject("CrystalReports.BooleanSearchControl";)
BooleanSearchControl.ReportDocument = clientDoc
viewer.BooleanSearchControl = BooleanSearchControl
viewer.ProcessHttpRequest Request, Response, Session
%>
If I set viewer.EnableParameterPrompt = false then I get an erro upon clicking the viewer's refresh button (error is: Missing parameter values. webReporting.dll error '8004100e' ), but if I set viewer.EnableParameterPrompt = true, then I get the automatically generated prompts appear but they are all empty. Either way, RAS doesn't remember the supplied parameters. I know the parameters are being read by RAS as the report's contents prove this fact, but they are not remembered after refreshing. If the automatically generated prompts are filled in and submitted, subsequent refreshes work correctly.
How do I get the report viewer to reuse the parameters that have been set programmatically after a refresh? BTW, changing my implementation to anything other than using ASP against an unmanaged RAS server is not an option at this time.
Thanks in advance!
Dave.

Hi Dave,
I don't have a "nice" set of code lines but below hard codes one parameter name and value:
            ISCRParameterField newParameterField = new ParameterFieldClass();
            newParameterField.ParameterType = crParameterFieldTypeEnum.crParameterFieldTypeReportParameter;
            newParameterField.Name = "YourParamName"; // you can make a collection here
            newParameterField.ReportName = "";
            newParameterField.Type = CrFieldValueTypeEnum.crFieldValueTypeStringField;
            newParameterField.AllowMultiValue = true;
            newParameterField.AllowCustomCurrentValues = true;
            Fields parameterFields = reportClientDocument.DataDefinition.ParameterFields;
            ISCRField existingParameterField;
            RowsetMetaData rowsetMetaData = new RowsetMetaDataClass();
            Fields fields = new FieldsClass();
            ArrayList defaultValues = new ArrayList();
            reportClientDocument.DataDefController.ParameterFieldController.SetCurrentValue("", @"YourParamName", @"YourParamValue");
Thanks again
Don

Mailing Problem in Reports Writer 3.0 (URGENT)

Hello,
I 'm facing mailing problem in Reports Writer 3.0.
All Reports files (.rep) are stored on NT Server(in a particular
dir) and I have full permission (on that dir).
After running the report, when I try to send mail then it gives
the following error
REP-4203: Error occurred while sending a mail message.
REP-4221: Cannot access attachment file.
So pls. suggest me.
Thanks
PSR
null

This is the wrong forum for reports issues - particularly for such an old version :-) However, you'll have to write a user exit to do that kind of stuff. And no don't ask me how, it was all too long ago, but there should be a section on that in your manual.

Problem in reports 6i while using delimiter option.

Hi,
I am facing problem in report writer while using delimiter option.
Report summary
==============
In my report I am having two queries in data model and two different repeating frame for each in layout.
These quires are called based on the user parameter. That means if user parameter is 1 then query 1 is called and the report is kick off and same for query 2 when user parameter is 2).
Problem Encountered
=================
Both these reports are running fine while using pdf option to generate report .
While using delimiter option only one of the query is able to generate report (based on which ever is created first and rest will give 0 byte file).
I have also trapped it while using messages and it is logically flowing fine.
I think report writer does not support such scenario.
please expedite on this.
thankx
peyush

Hi,
There are no such limitations with Reports. If I understand properly, you run the Report twice, in each run, you are trying to execute different query, and you generate two dilimited Reports output files? This should work fine. Try out the latest Reports 6i patch-10 for this. You can even approach Oracle Support with your testcase. FYI, with Reports 6i patch-11, a new feature "dlimited data" is introduced which will give delimited output with a data dump i.e it would not be dependent upon the Reports layout. You can probably try out this new feature also.
Thanks,
Rohit Hi Rohit,
Thanks for the information.
well I am generating single output file on each run .
the problem is somewhat funny.
I have build query2 in data model after query1.
query 1 is giving me correct output both in .PDF and delimiter version.
But query2 is giving me 0 byte file for delimiter version although in .PDF it is running fine.
When I took out query2 to another module it is running fine for both.
I hope this make sense.
Moreover if u still not clear about the problem and thinks that u can help me out please send me ur mail id so that I can send you the RDF copy.
Thanks
Mohit...

RAXINV - Strange problem in Report Builder

I'm having a very wierd problem in Report builder 6.0.8.27.0. I'm simply trying to add two additional columns to the AR Invoice report (RAXINV) so that they get included in the XML output. This report has a main query called Q_INVOICE which is basically a dummy query to set the column aliases and at the end of the query it does a UNION with the user parameter &common_query.
So, what I have done is gone into the common_query parameter and added the two extra dummy columns before the FROM statement (I've tried adding at different places but always the same result). Once that is done I've then gone into the Q_INVOICE query and added the same two columns. When I hit the OK button to update the query is when my problems start.
There is a group in the report called G_ORDER_BY that has the field ORDER_BY in it. After clicking ok to update the query the G_ORDER_BY now has a field called BILL_CUST_NAME1, but the XML tag is still saying ORDER_BY. This happens to many fields in the report (the names are changed/corrupted) and as such the report is now useless as it won't compile.
I have no idea why this would happen and I've never seen anything like this before.
Can anyone provide any help on this ? I've logged an SR on this too but wanted to try here also incase someone had already crossed this problem.

Dave,
Not sure if its relevant or not, but I just fixed this issue, you need to change your query in three places, common_query parameter, build_query program unit and the main query itself in report editor.
Cheers,
Zeeshan

Sign problem in Report

Hi Folks,
I have a problem in reporting.
We are getting a data from flat file and loaded in to ICELIM cube and later that will pull into Managerial Consolidation Cube.
P99T is account member and its ACCTYPE is EXP and its a parent member.
We created a one report based on ICELIM cube its showing negative values for the member P99T. Created another report based on Managerial Consolidation Cube, Here the same member showing Positive values.
Can any one please let me know what is the problem is?
I need Positive values in Both reports.
Regards,
G. Saida Reddy

Hi vadim,
Thank you for you response,
Recently I take over this project, Previously one guy is handled all those things.
But if "Descendants of P99T is Applicant count=EXP(ACCTYPE), FT=EXP(ACCTYPE), Applicant Rate= EXP(ACCTYPE)" then P99T is meaningless - how can you aggregate count, FT and rate????
Can you please let me know the what is the exact point your are saying from above.
we have positive signs for base members of ICELIM and Managerial Consolidation.
Now it is not possible to change moving data from ICELIM to Managerial Consolidation.
can you please let me now the issue for sign in the report?
Regards,
G. Saida Reddy

Problem printing report

I have a small problem printing reports which exist of 1 page.
1st report is printed OK
2nd one is bad
3rd one is bad
4rd one is bad
5th is OK again... and so further.
When I choose a different printer, all prints are OK. When I print from another PC on the same printer, all prints are OK.
I assume some settings are disturbing the prints; can anyone suggest where I should take a look?

are you using a dot matrix printer or a laser printer?

Problem running reports

I finally configured and was able to start the reports server on my Solaris box. The listener is running. When I run a report, either by command line using rwrun60 or from a form using RUN_REPORT_PRODUCT, the report kicks off without error but will not finish. I have to kill the process, and no output results. I had no problems when running from NT, so I'd bet the problem is in the configuration not the report itself. Any ideas?

I'm still working this problem.
I have a printer configured, and have no problem generating report in character mode and send directly to printer.
I did have to add localhost access to Xwindows with
$ xhost +localhost
Now I have valid display value.
Unfortunately, still having the same problem. rwrun60 kicks off, but gets hung. I have no problems running forms on the this server. Any other ideas?

I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please?

I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please? This applies to my iMac and my macbook air! I'm using OSX Version 10.9.3

Hi Shauneenb,
Welcome to the Apple Support Communities!
If you are having issues with multiple applications becoming unresponsive I would suggest the steps in the following article, including starting in safe mode.
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
I hope this helps,
-Joe

Problems with IE8 "not responding" on windows 7

I have a Toshiba Satellite L-355 that has been upgraded to run Windows 7 Home Premium from Windows Vista. I've been having problems with IE8 "not responding" and have tried running it without add-ons, system restore, and banging my head against the wall. All to no avail. Does anybody have any ideas how to fix this? I've tried running other browsers with the same problems.

Intel(R) HM55 Express Chipset LPC Interface Controller
Thanks, sav! That's perfect. (Good to know it shows up in Device Manager for people, too.)
Okay ... although it's the Intel P55 and PM55 chipsets which get all the press about cranky Touch/iPhone connections on Windows 7 systems (the 0xE0000065, -6999 and "Disk can not be read or written to" error messages are the most common, although symptoms can vary further than that), similar sorts of issues look like they could strike other Intel 5-series chipsets ... including your HM55.
So I'm proceeding precisely as I would with someone with a PM55 chipset.
*1) Dell updates*
Some folks with 5-series chipset trouble have got past it by way of BIOS updates. So I thinks it's worth your heading to your Downloads page at Dell, and checking to see if there's any newer versions of your BIOS lurking there. Unfortunately, with the Studio 15s I'm never precisely sure which is the correct downloads page ... so I'd try going to the following Dell page:
http://support.dell.com/support/downloads/index.aspx
... enter your service tag, and then drill through to your downloads page.
Any improvement with your syncing performance after applying any available BIOS updates at Dell?
*(2) Adjust power management setting on USB controllers*
If no joy after updating (if you were behind on your BIOS version), try applying the measures from the following document:
[iPod not recognized when connected to Windows laptop over USB|iPod not recognized when connected to Windows laptop over USB]
Reboot the PC after making the changes, and then try another sync. Any improvement?
(If either set of measures improves your sync performance, please post back to let us know which one helped for you.)

IPhoto app stops responding upon launch. Please help how I can fix this problem., iPhoto app stops responding upon launch. Please help how I can fix this problem.

iPhoto app stops responding upon launch. Please help how I can fix this problem., iPhoto app stops responding upon launch. Please help how I can fix this problem.

Please clarify:
What is your iPhoto version?
And what do you mean by "not responding"? Is iPhoto hanging and showing the spinning beachball?
Can you launch iPhoto, if you hold down the options key while launching and select or create a different library?

Soritng problem in report

Hi all
I have a problem in report runtime decision.
I have created a report say report1....and on runtime i decide its runtime sorting order by passing a column value
through my USER PARAMETER to the ORDER BY clause.
But the problem is that the data model has its own BREAK ORDER as well for each column.
How can i change that property at runtime.
Kindl guide me if any one knows the solution.
Thanx,
Qaiser Qayum Malik.

Hi,
Pl see this thread:
Order By within repeating frame
By the way, break order decides the sorting order ONLY if the report has break-groups. If your report has a single group, the order by clause should work.
navneet.

Font problem in reports 6 character report

hi...
i have this character report. i have set the font of all objects in the report to Courier, point size 10. the report also has a number of bozes and lines i have drawn.
now the report displays perfectly from the previewer and also prints perfectly...as long as i run the the report from within Report Builder. When i try to run the .rep from Forms using run_product, the font goes haywire. it displays everything in some Lucida font and my boxes and lines disappear.
anyone has any idea ?????
thanx in advance....
ciao
venkat

I have found this reference on a search of oracle:
http://download-uk.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_trouble.htm
Section D1.11 says this is a know problem and to copy one registry entry to another, however, this entry does not exist on the Windows 2003 server this is running on.
Any ideas?
D.1.11 Printing and Font Errors When Using In-process Server
The in-process server does not recognize the default printer of a user currently logged on to Windows. This is because the service that runs the in-process server is logged on as the Local System.
Problem
Any of the following:
* Printing to default printer fails with the REP_3002 error. For example, the following command:
http://myrepsrvr.us.oracle.com:7777/reports/rwservlet?report=myrep.rdf&destype=printer&desformat=html
results in the following error: Error:"REP-3002: Error initializing printer. Please make sure a printer is installed."
* Deploying reports containing Oracle6i Graphics (OGD) graphics causes Reports Server to stop responding.
* Font alignment problems in a PDF file output from an in-process server.
Solution
To work around all these issues:
1. Open the Windows registry using a registry editor (for example, regedit.exe). Create a backup of the registry before you edit it.
2. Navigate to the following key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Windows
3. Copy the string value of Device for this key. For example: \\MOWGLI\sierra,winspool,Ne02:
4. Navigate to the following key: HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Windows
5. Paste the Device value copied from HKEY_CURRENT_USER (the string value of Device for this key will be empty).

Problem in Reports. Pl. Respond.

Similar Messages

Maybe you are looking for