Problem in searching table

Hi,
I am in search of a SAP table consisting of the Transport Request number and having the MANDT field as the first field.My requirement is to create a list consisting of some field with these two fields CLIENT and Transport Request Number.I checked in table E070 and E071 but MANDT field is not there in these two table.
Please help.Points will surely be awarded to the answer with correct pointer to the problem
Regards,
Mukesh Kumar

hi...
jus go to se11.
there is one table "CCC_CHECK" which has those fields u r asking for.
enter that in database table n u can see the table.
this shud b useful.
reward points if it helps u..
all the best.

Similar Messages

Problem in creation table for sap 4.6

hello evrybody
i have just a problem in creating table with se11;after saving and activite those table and zhen i select icon of contents it bloocks and shoz this error message :
Error reading table TMCNV; RC = 4
Message no. BMG 135
thank you for your help
Edited by: Rob Burbank on Apr 6, 2010 10:20 AM

Seems like you have a material number field (domain with conversion routine MATN1 or alike) and table TMCNV does not have the entry with key 'MATCONV', check the where used-list of message BMG 135. I assume this entry comes delivered by SAP, so try to restore it.
Also search for OSS notes with "TMCNV" or "BMG 135".
Thomas

Add a new column in search table SERIAL_NUMBER that remains 1-10 everytime

Hi All,
I need to add a column SERIAL_NUMBER to search table and what i want is that it should display 1-10 on every page.I press Next and it should again show Sr No. 1-10.
For this i added a transient variable to the SearchVO and the CO code for Table region is as follows :-
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
SearchAMImpl am= (SearchAMImpl)pageContext.getApplicationModule(webBean);
SearchVoExImpl vo=(SearchVoExImpl)am.getSearchVoEx();
SearchVoExRowImpl searchRow=(SearchVoExRowImpl)vo.first();
searchRow.setSerial(new Integer(1));
while(vo.hasNext())
if(searchRow.getSerial().intValue()==11)
searchRow.setSerial(new Integer(1));
int i=searchRow.getSerial().intValue();
Integer p=new Integer(i+1);
searchRow=(SearchVoExRowImpl)vo.next();
searchRow.setSerial(p);
The problem i am facing with this is when i sort the result table using any column the Serial Number gets disappeared.
And also when i press Go button for searching it shows me the end results first.
Please help me out.

hi,
yes i am displaying 10 rows at a time and also there is no order by clause in VO query.
The above method did not work again. I tried and again got the serial number which is not ordered.
You can see my query:- select decode(mod(rownum,10), 0, 10, mod(rownum,10)) Serial_Number,party_name,address1,address2 from hz_parties
As i mentioned in my question in the beginning that after sortin the sr_no disappers i am able to solve it by handling SORT_EVENT.
Now the only problem left is that it shows me the last results first. Can you please help me here?
Thanks

Q: how to put values of two VO in a search table that is dependent

Hi
my requirement is somehow complicated, it is as follows:
i have an employeeEO and a DirectorEO with the corresponding employeeVO and DirectorVO i want to make a search on the two VOs but with one search table and one go button.
I have put a query region then region using wisard for the EmployeeVO then add an item for the director with no view instance and no view attribute, now i don't know how to put the name of the director in DirectorVO according to the empID in EmployeeVO
any help would be appriciated
Thanks

i have also put the following in the processRequest
OATableBean employeeTable = (OATableBean)webBean.findChildRecursive("EmployeesVO1");
OAMessageChoiceBean directorIdList = (OAMessageChoiceBean)employeeTable.findChildRecursive("Director");
OAMessageStyledTextBean empIdList = (OAMessageStyledTextBean)employeeTable.findChildRecursive("EmpId");
directorIdList.setListVOBoundContainerColumn(0, employeeTable,"empIdList");
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("putDirector");
but the problem is how then i can put the empId in the Am without a specific reference ??

Problem in Assigning table to access sequence

Dear All,
i am facing problem in assigning table to access sequence for billing output type.
I have created 1 table B902 with the combination of Sales org,plant ,Division,Billing doc type.
but if i am going to assign with access sequence system is taking for Billing type & division & for other its showing red marks & errorr.Access sequence->Aceessess->Field.if i am clicking on field in I/O column for plant its displaying negative.
bcause of this i am not able to make condtion record.
Message is Select a document field for WERKS
Regards
ajit
Edited by: SAP SD AJIT on Mar 1, 2010 3:18 PM

Hi SAP SD AJIT ,
Go to IMG --> Sales and Distribution --> Basic Functions --> Output control --> Output Determination --> Output Determination using condition technique --> Mantain output Determination for billing document --> Mantain condition table, in the pop-up choose the option "Field catalog: Messages for billing documents", there you can add standard field into the catalog, so you can add WERKS and the other one "document structure" I don't know what field it is, but if it is and standard field you can add it. If you have a Z field you need ABAP help to add the Z field to the structure "KOMKBZ5" and then you can add it to the catalog.
Regards,
Mariano.

How to search table in R3 and XI?

hi pals,
how to search table in R3..like if i go to se16..then if in enter *ara then f8 should give table details..is it right..
or se 16 i have to give ara like this..plz correct me how to search in se16 or other than this tcode se11 only...is it right...if any other way i can search table plz tell me...
thanks
Ruban

Hi,
Please try these ...
1. Go to transaction SE11.
2. Enter Database table with KNA1.
3. Click on Display button.
4. System will display the detail components/fields of table KNA1.
5. Click on Contents button (CTRLShiftF10) to see contents of table KNA1.
Regards,
Ferry Lianto

Problems with a table in PDF`S footer

Dear sirs,
We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
We have no problems with the table included in the main body
In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
May you help us to solve our problem?
Thanks in advance your help.
Edited by: emgaitan on Mar 16, 2010 2:18 PM

Wardell,
Check the data in RSA3 for the extractor that you use to bring data .
You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
Let me know if you need anything else.
Thanks
Ravi Thothadri
[email protected]

Problem in joining tables

Hi All,
Here I am facing the problem in Joining table I have S031,s032,makt,marc,I need a field ATWRT field from CAWN table,I did't find any link for this above from tables, any one please help me how to find out.
REPORT ZMMTEST.
tables:s031,s032,makt,marc.
DATA : BEGIN OF itab1 OCCURS 0,
       matnr TYPE s031-matnr,
       lgort      TYPE s031-lgort,
       werks      TYPE s031-werks,
       spmon      TYPE s031-spmon,
       magbb      type S031-magbb,
       wagbb      type S031-wagbb,
       azubb      type S031-azubb,
       aagbb      type S031-aagbb,
       END OF itab1.
DATA : BEGIN OF itab2 OCCURS 0,
       matnr like makt-matnr,
       maktx like makt-maktx,
       END OF itab2.
DATA : BEGIN OF itab3 OCCURS 0,
       matnr TYPE marc-matnr,
       werks type marc-werks,
       ekgrp type marc-ekgrp,
       END OF itab3.
DATA : BEGIN OF itab4 OCCURS 0 ,
       matnr   TYPE s032-matnr,
       lgort   TYPE s032-lgort,
       werks   TYPE s032-werks,
       mbwbest type s032-mbwbest,
       wbwbest type s032-wbwbest,
       END OF itab4.
data : begin of itab5 occurs 0,
      objek   type ausp-objek,
       atwrt   type cawn-atwrt,
       end of itab5.
DATA : BEGIN OF itab_final1 OCCURS 0,
       matnr      TYPE s031-matnr,
       lgort      TYPE s031-lgort,
       werks      TYPE s031-werks,
       spmon      TYPE s031-spmon,
       magbb      type S031-magbb,
       wagbb      type S031-wagbb,
       azubb      type S031-azubb,
       aagbb      type S031-aagbb,
       maktx      TYPE makt-maktx,
       ekgrp      type marc-ekgrp,
       mbwbest    type s032-mbwbest,
       wbwbest    type s032-wbwbest,
       END OF itab_final1.
DATA : BEGIN OF itab_final OCCURS 0,
       matnr      TYPE s031-matnr,
       lgort      TYPE s031-lgort,
       werks      TYPE s031-werks,
       spmon      TYPE s031-spmon,
       magbb      type S031-magbb,
       wagbb      type S031-wagbb,
       azubb      type S031-azubb,
       aagbb      type S031-aagbb,
       maktx      TYPE makt-maktx,
       ekgrp      type marc-ekgrp,
       mbwbest    type s032-mbwbest,
       wbwbest    type s032-wbwbest,
       atwrt      type cawn-atwrt,
       END OF itab_final.
select-options:s_matnr for s031-matnr.
start-of-selection.
select matnr lgort werks spmon magbb wagbb azubb aagbb
        from s031 into table itab1
        where matnr in s_matnr.
if not itab1[] is initial.
    select matnr maktx from makt into table itab2 for all entries in itab1 where matnr = itab1-matnr.
if not itab2[] is initial.
   select matnr werks ekgrp from marc into table itab3 for all entries in itab2 where matnr = itab2-matnr.
if not itab3[] is initial.
   select matnr werks mbwbest wbwbest from s032 into corresponding fields of table itab4 for all entries in itab3 where matnr = itab3-matnr.
*if not itab4[] is initial.
   select atwrt from cawn into corresponding fields of table itab5.*
     endif.
   endif.
endif.
endif.
end-of-selection.
loop at itab3.
   itab_final-matnr = itab3-matnr.
   read table itab2 with key matnr = itab3-matnr.
   if sy-subrc = 0.
    itab_final-maktx = itab2-maktx.
   read table itab1 with key matnr = itab2-matnr.
   if sy-subrc = 0.
    itab_final-lgort = itab1-lgort.
    itab_final-werks = itab1-werks.
    itab_final-spmon = itab1-spmon.
    itab_final-magbb = itab1-magbb.
    itab_final-wagbb = itab1-wagbb.
    itab_final-azubb = itab1-azubb.
    itab_final-aagbb = itab1-aagbb.
endif.
   endif.
   itab_final-ekgrp = itab3-ekgrp.
read table itab4 with key matnr = itab3-matnr.
if sy-subrc = 0.
itab_final-mbwbest = itab4-mbwbest.
endif.
itab_final-wbwbest = itab4-wbwbest.
append itab_final.
clear itab_final.
endloop.
WRITE: /2 'material', 23 'storagelocation',29 'plant',35 'date',44 'val.stock.issue',66 'val.stock.issue.value',86 'no.of.stock.receipts',97 'no.of.stock.issues',150 'material.des', 160 'pur.group',190 'stock.val',210 'stock.quan'.
ULINE.
loop at itab_final.
WRITE: /2 itab_final-matnr, 23 itab_final-lgort,29 itab_final-werks,35 itab_final-spmon,44 itab_final-magbb,66 itab_final-wagbb,86 itab_final-azubb,97 itab_final-aagbb,
           150 itab_final-maktx, 160 itab_final-ekgrp,190 itab_final-wbwbest,210 itab_final-mbwbest,itab_final-atwrt.
ENDLOOP.
Thanks&regds,
Sree.

Hi sree,
take join between s031-sptag ,ausp-datuvthen fetch records based on this condition.(itab1)
After retrieve records based on join condition between
ausp-atinn,ausp-adzhl and cawn-atinn,cawn-adzhl.(itab2)
Retrieve records using for all entries bet first join condition and second join condition.
use for all entries between itab1 and itab2.
it will work surely.
reaward points

Sorting Problem in FND_MENU_ENTRIES_TL Table

Hi,
FND_MENU_ENTRIES_TL Table storing the record FND_MENU_ENTRIES_TL_N1(MENU_ID,PROMPT,LANGUAGE) wise in R12. But whereas in 11i, records stored FND_MENU_ENTRIES_TL_U1(MENU_ID,ENTRY_SEQUENCE,LANGUAGE).
I am confused, whether i need to recreate the index in R12, so the records will get store MENU_ID,ENTRY_SEQUENCE,LANGUAGE wise.
Could any one please suggest me how to resolve this problem.
Thanks,
Praba T

815667 wrote:
Hi,
FND_MENU_ENTRIES_TL Table storing the record FND_MENU_ENTRIES_TL_N1(MENU_ID,PROMPT,LANGUAGE) wise in R12. But whereas in 11i, records stored FND_MENU_ENTRIES_TL_U1(MENU_ID,ENTRY_SEQUENCE,LANGUAGE).
I am confused, whether i need to recreate the index in R12, so the records will get store MENU_ID,ENTRY_SEQUENCE,LANGUAGE wise.
Could any one please suggest me how to resolve this problem.
Thanks,
Praba TPl do not abuse the forums by cross-posting in multiple forums
Sorting Problem in FND_MENU_ENTRIES_TL Table
Sorting Problem in FND_MENU_ENTRIES_TL Table
Your issue is related to EBS, not to database upgrades (which is the topic of this forum)
Srini

I am getting problem with internal table & work area declaration.

I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
         matnr TYPE makt-matnr,
         spras TYPE makt-spras,
         maktx TYPE makt-maktx,
         maktg TYPE makt-maktg,
         celltab TYPE lvc_t_styl,
       END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
    But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
              MATNR TYPE MAKT-MATNR,
              SPRAS TYPE MAKT-SPRAS,
              MAKTX TYPE MAKT-MAKTX,
              MAKTX TYPE MAKT-MAKTG,
              CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
             END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
          WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep

Problem with a table control

Hi gurus,
I´ve a problem with a table control. It has 3 columns which one is a checkbox.
I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
Thanks for all
Dani

Assign a function code to the checkbox column....
so when u check / uncheck any entry, PAI + PBO will be triggered....
In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
by looping at screen and setting screen-input = 0 for rest of the columns.
like ...
LOOP AT tc_itab
       WITH CONTROL tc_test
       CURSOR tc_test-current_line.
   module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
ENDLOOP.

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

Problem with Pivot Table with Graph: Line Bar Combo

Hello people!
I have a problem with pivot table and line bar combo (all in the same view (pivot table))
I have some measures and one dimension in my report.
--------------measure1---measure2---measure3
Dim A.1
Dim A.2
Dim A.3
If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
Thank you very much!

Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

MDM iView Wizard: Search Table doesnt populate any value.

Hello all,
I am trying to create MDM Resultset IView using MDM IView wizard in portal.
I do not get any value in the dropdown of Search Table.
I have created an MDM system and assigned a repository to it.
The wizard doesnt allow me to go ahead without selecting search table parameter from the dropdown.
Techincal details:
MDM: 5.5
EP:- 2004 SP 16.
Please give me your valuable inputs.
Ashutosh

Hi Ashutosh,
After creating an MDM system and assigning a repository, you need to right-click on the system, and then choose System Aliases. Define an "alias" and save it.
Now go to User Administration -> Identity Management.
Select the User/Role/Group you want to assign to the System.
Click the User Mapping for System Access tab, and click Modify.
Select the system alias from the drop-down box, and map it to an MDM user. Note that in NW 7 (NW04s), the user must have a password, so you may need to configure this first in the MDM Console.
Save the mapping, return to the System Administration -> System Configuration screen.
Locate your system, right-click it, and select Connection Tests. Test the connection. If it succeeds, you are now ready to create MDM iViews using this system.
This information can also be found <a href="http://help.sap.com/saphelp_mdmgds55/helpdata/EN/45/c8cd92dc7f4ebbe10000000a11466f/frameset.htm">here</a> in the SAP Help Portal.
Regards,
Walter

Problem with truncate table in procedure ora -00054

hi do anybody know where is mistake ???
the procedure has problem with truncate table
ora - 00054: resource busy and acquire with NOWAIT specified
ora - 06512 at "POVAPSYS.HMAN_P_REFRESH", line 6
ora - 06512 at "POVAPSYS.POVAPSYS", line 6
ora - 06512 at line 1
this is my procedure....
AS
BEGIN
execute immediate 'TRUNCATE TABLE hman_t_max';
INSERT INTO hman_t_max SELECT * FROM hman_v_max;
COMMIT;
END;

2.MAKE SURE THAT OTHER THAN YOU ANYBODY IS TRYING TO
COMPILE AND RUN THE PROCEDUREShould he make sure that anybody is running the procedure?
3.MAKE SURE THAT ANY PARALLEL QUERY IS RUNNING IN THE
SERVER SIDE,THATS KEEPS THE RESOURCE BUSYShould he make sure any parallel query is running in the server side to keep the resource busy?
Gita,
I COULDN'T RESIST HAVING ONE SUGGESTION FOR YOU. Please look at the impact of your English in the reply before posting. Check if that sends reverse message!
Cheers
Sarma.

Problem in searching table

Similar Messages

Maybe you are looking for