Problem in SICF

Hi,
I want to have automatic logon into a bsp page (application)
ICF path: /default_host/sap/bc/bsp/sap/
Everthing works fine in SAP DEV and when I transport it to SAP TEST there seems to be a problem because none of the fields in "Anonymous Logon Data" tab is filled out ??
Client, User, Password is not there....
Why do it have problem trasporting these fields ??
//Martin Andersson

Hi,
Trying to make changes to username,password directly in SAP T01 it gives me:
Changes to Repository or cross-client Customizing are not permitted.
and later on:
Invalid call sequence for interfaces when recording changes
Any Pointers ?
(I'm loging on as USER1 and client 300. USER1 has SAP_ALL )
//Martin

Similar Messages

Facing Problem in SICF

Dear gurus
I want to add logon data in CONTNETSERVER service located in SICF .
my PRD is in modifiable state but it does not allow me to enter the username and password.
can you guide me how to add this detail ? or is there anyway i can transport these details from development server.
Regards
Saad Nisar.

Saad,
this is the wrong forum. Please post to the SAP NetWeaver AS forum.
Regards,
Marc
SAP NetWeaver RIG

Facing Problem in SICF configuration

Dear gurus
I want to add logon data in CONTNETSERVER service located in SICF .
my PRD is in modifiable state but it does not allow me to enter the username and password.
can you guide me how to add this detail ? or is there anyway i can transport these details from development server.
Regards
Saad Nisar.

Saad,
this is the wrong forum. Please post to the SAP NetWeaver AS forum.
Regards,
Marc
SAP NetWeaver RIG

Testing SICF services in WAS 6.20

How can we test the ICF services in WAS 6.20 servers. In WAS 6.40 we have an option 'Test' by right cliking on the Services in SICF. The same option is not available in 6.20 systems.
We have tried using the URL and testing the service but the page does not get loaded.
Sure that the service is not working properly, but can anyone help us on how to debug or fix this problem in SICF WAS 6.20 systems.
Amar
732 763 0287

Hi Jay,
Yes, it is possible in Web AS 6.20 to expose BAPIs as Web services. You find the exact documentation of how to do this in the SAP Service Marketplace: http://service.sap.com/connectors. Then go to "SOAP Processor" --> "Media Library". However, the wizard that helps you create the Web service is not yet available in 6.20.
Regards,
Susanne

I want to Hide Back option but Not Save option when using transaction iview

Hi,
Sap Guru's
I am new in Sap EP.... I am using Transaction iviews in the portal.... I want to Hide Back option but not the Save Option of transactions....I want to hide it from potal ...... Is it Possible.....
I have done settings in SICF Tcode in ECC system as Following:
~Webgui = 1
~Webgui_simple_toolbar = 160, 2, 4, 16, 32, 64 and some more values... It is hiding the Back option but also the Save Option....
I also want to disable commands as Ctlr + S , shift + F3
Suggest me some solution so that this can be done from portal instead of ECC systems.....
Thank's in Advance
Regards-
Sumeet Sharma

Hai,
Kalyan,
I have done this problem using SICF but instead of Hiding Back option .. I have allowed a user to run only one transaction using an iview....
Put following parameter in SICF:
~webgui = 1
~theme = Sl
~SINGLETRANSACTION = 1
By this configuration user will be able to execute only one transaction i.e assigned him in his transaction iview.... It's an alternate solution of hiding back......
when user click front screen back option of an transaction iview he will get message ... Logged off....
Regards-
Sumeet Sharma

Problem in service testing in SICF.

Hi all
Our users are not able to test any of the services in SICF. Whenever they try to test any service, they either get the error message "400 Session timed out - please log in again", or they get an empty IE window with message sap-client=800.
following is the example URL:
http://chn-mumsap05.cvns.corp.covansys.com:8001/sap/bc/bsp/sap/zhotelbooking?sap-client=800
and output is :
sap-client=800
I am not able to track exact solution of the same. Please suggest any possible solution.
Regards
Rahul

Hi,
Please check the setting in SICF and find all the services are active, i feel due to some service which is not active it is creating the problem.
Please check the port...
Regards.
Hassan
SAP Basis Consultant

How can I create a redirect to an URL like in SICF?

Hi,
we offer the payroll (com.sap.pct.erp.ess.paycheck_service / sap.com/ess~rem/payslip2) in our portal which is a Java-WD. Whenever we import a modified version of the corresponding HRFORM into the P-system the application aborts with an error because the HRFORM has to be generated first after the import.
I wanted to get rid of this problem by using the SICF where you can define a redirect to an URL (I wantet to switch to a "service is under construction"-WD). Unfortunately the SICF can only be used for WD4ABAP-services as I know - not for Java.
Has anybody an idea how to solve my problem? I want to switch to a "service is under construction"-WD whenever there's an abort while processing the payroll application.
We don't have any Java skill.
Greetings,
Steff

You can place the html in component folder. src>mimes>Components. and can be accessed by code
try {
String url = WDURLGenerator.getAbsoluteWebResourceURL(wdComponentAPI.getDeployableObjectPart(),"<redirect>.html");
} catch (WDURLException e) {
wdComponentAPI.getMessageManager().reportException(e.getMessage(),true);
1) you can use the url to navigate to the redirect page or can try exit plug.
nikhil

Disp+work.EXE has encountered a problem and needs to close ...

Hi all
I've installed NW 7.02 ABAP trial on a VM running with XP Pro english version, SP3.
Via SICF also all services have been activated.
When calling SE80 -> Web Dynpro -> (e.g.) WDR_TEST_MISC (or any other WD apllication) -> opening: Component Interface -> double click on INTERFACECONTROLLER -> selecting: CONTEXT -> and then select the 'Properties' tab ==>> the following ERROR occurs:
=> disp+work.EXE has encountered a problem and needs to close ... (seems to me to be a MicroSoft popup)
After closing this popup, another one appears, telling me: 'SAP GUI for Windows 720 - NSP: Sap Systemnachricht; Work process restarted; session terminated'.
That's the end of this session :-((
This error occurs only when I try to call the properties of the Interface context!
Regards, Stefan

Hi Stefan,
I had this problem yesterday while using SGEN after a fresh install of NW 7.02 (64 bit).
I forgot to switch of the DB Log and it ran full (I think in earlier versions of the preview installtion MaxDB Log was set to overwrite mode by default which isn't the case with this installation). Anyway, the log ran full, disp+work died and after that it was imposible to restart the system because the dispatcher died shortly after it had started.
Maybe you check your DB with the database manager.
Good Luck
Markus

Refresh problem of Webdynpro application which is wrapped in a BSP IFrame

I have a BSP Iframe inside which I am calling a webdynpro application ('zwdc_re_replenishment'). The requirement is that this WD application should be reloaded whenever a timeout occurs. Currently, when there is a timeout, an error is shown.
In order to achieve this, for this WD Application , I have a SICF node to which I have attached a customized Errorpage via the option 'Redirect URL'.
Whenever the WD application undergoes a timeout error, my custom error page is called which is named as errorpage.htm. On this page in the 'OnInitialization event', I try to call the WD application URL again (via the following code) which should reload the application. But instead I get a blank page.
CALL METHOD cl_wd_utilities=>construct_wd_url
EXPORTING
    application_name = 'zwdc_re_replenishment'
IMPORTING
    out_absolute_url = lv_def_url.
response->redirect( url         = lv_def_url
                    permanently = 1 ).
Just as a note I have already tried out the following methods as well but nothing works
*navigation->exit( lv_def_url ).
*navigation->call_application( lv_def_url ).
Is this because my WD application is inside a BSP Iframe and therefore reloading it manually does not work ?
Please help!
Thanks.
Sukanya

Hi Thomas,
First of all, thanks a lot for replying !!
Sorry for the confusion. Although seems like you have answered my question already.
Actually the requirement for embedding WDA inside a BSP Iframe came up since there are some WD report applications that are accessed by very controlled environments in which the users were not able to close the WDA session directly (without the IFrame) and were getting some errors. Hence the WDAs had to be wrapped inside BSP IFrame which solved the above problem.
I am working with only one BSP app which has the Iframe and one WD app which is called within the BSP app.
Now, the other requirement that came up was that whenever the WDA session inside the BSP IFrame expires, there should be no error page and instead the WD app should be reloaded.
So I was trying to reload the WD App in the following way.
1. For the SICF node of WDA, I attached an errorpage.htm for all the tabs under the tab 'Error Pages'. I have defined this errorpage.htm inside the same BSP App which has got another default.htm page. So the BSP App has 2 views : default.htm which has the IFrame and Errorpage.htm.
2. So now when the WDA expires, the events of errorpage.htm are called like OnInitialization, In this event I was calling the methods navigation->exit( 'URL of the same WDA' ).
I did this because I wanted to reload the WDA whenever it expires. I tried to specify the WDA Url in the SICF node of the same WDA in 'Redirect URL' under the Error Page tabs but it didnot work.
Now I realize this is not gonna work. I didnot want to modify the WDA and so I didnot specify any exit plugs in the WDA which would have taken care of reloading the WDA. But that seems to be the only way out.
Actually speaking there are multiple WDAs which will open inside the same BSP IFrame via their own Application URLs. I have coded the BSP IFrame to read the URL Parameters and open up the corresponding WDA. So now I have to define an exit plug in all of these WDAs.
Do you suggest that this will solve the problem of WDA refresh ? Just to confirm.
Thanks again.

Service created in sicf is not working

Hi Experts,
We have created a service in SICF and activated properly. When I test the same, the page can not be displayed error is coming.
Can any one guide what could be the possible reasons for this problem?
Points will be awarded for suitable answers.
Thanks in Advance.
Jitender

Hi,
To create your own service, position your cursor on the object in the tree that you want to be the parent of the new service. This can be an existing service or a Virtual Host. Choose Service / Virt. Host / Create service (or click on it with the right mouse button and choose New Subelement). In the following dialog box for your service or the alias for an existing service, enter a name and decide whether you want to create a service (Independent Service) or an internal alias (Alias for an existing service):
the service name can have a maximum of 15 characters. Since services are transported, they are subject to the transport systemu2019s restrictions.
refer this link
http://help.sap.com/saphelp_nw04/helpdata/en/55/33a83e370cc414e10000000a114084/frameset.htm
Regards,
Surya

Problems in sent of external MAIL with the service SAPCONNECT

Hello all
We configured the service SAPCONNECT in my system quality for sending the mail and this is not problem, I executed tests with direction of mail internal and the are sent without any problem.
But the problems starts is when I sent the mail external and the message that displays is
Status received for this document:
     System Messages
Sent on:
     25.01.2011 11:29:07
Sent by:
     Marco Gerardo Ceballos V.
Status for Recipient xxxxxxx@aaaaa:
     No delivery to xxxxxx@aaaaa, as recipient unknown
The request of area of development is send the external mails.
I review the configuration in the transaction SCOT and I not see a problem.
ATTE
Gerardo Ceballos

Hi,
Please check the parameter icm/server_port_1, if this parameter is not set, add in TX RZ10 with the value:
PROT=SMTP,PORT=25
Restart the instance, then create a service user with the S_A.SCON profile.
In the SICF, open the SAPCONNECT service and check the configuration:
Host data: profile parameter = 0 // host configuration= :
Logon Data: Add the service user that you create
Handler List: CL_SMTP_EXT_SAPCONNECT
Save and active
In the SCOT add the domain in menu settings and add the mailhost and port in the SMTP node, Click the button SET in the internet option and add a * in field address area.
Go to SMICM --> Go to --> Services and check that the port that you add in the parameter icm/server_port_1 is active
Go to SBWP and send the message.
Good Luck
AG

Some problem about integrated ITS 640

How to change Webgui theme in integrated ITS 640
Dear all ,
My system is ECC5,the Package level it SAPKGPRC05,SAPKB64015,SAPKA64015,SAPKH500010.
now, I configure integrated ITS with T-code SICF .
I create a external aliases "/sap/bc/gui/sap/its/webgui" ,aAfter that I can connect to the
ITS with the following URLs:
http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
But now ,I have some problem cannot solve as follow:
1 When I logon ITS, the default language is English ,only English and Genman may be
selected,The requirement is that I want to use other language as the default logon language.
When I on the pop-up dialog box "Change External Alias" tab " Service data" ,"Anymous Logon
Data "select a Language "Chinese",the system pop-up a message box show "code page not
supported".how can i configure the default logon language ?
2 I hope use "https"-- Security Reqiurements ,as a security link ,so I selected "SSL",aAfter
that I can connect to the ITS with the following URLs:
https://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
IE show cannot find the web system .
And use the following urls:
http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
only show the logon page and notice the error "Logon not possible; none of the active logon
procedures is possible"
and how can I configure the "https" ? and must configure with se38 "W3_PUBLISH_SERVICES"
program together ,if like that ,i must republish all of the component again ?
3 I hope change the webgui theme , in ITS620 have theme 00,90 ,99 .and we can select
"EnjoySAP". but in integrated ITS 640 , i donot know where to find the its admin page to
setup the theme . can you tell me how can i find the admin page to setup the theme .
thanks all ,hope your reply !
Message was edited by:
Benson Lu

Hi,
Hope this Information is useful.
The SAP Integrated ITS only supports the new "Tradeshow" design (unlike the "standalone" ITS which also supports the well-known EnjoySAP design). The new design is more easily incorporated into the Enterprise Portal and is better adapted to the design of other SAP Web UI technologies (BSP, WebDynpro).
There are also changes to the header area in SAP integrated ITS in Tradeshow: The menu bar and standard toolbar functions are collected on either side of the transaction code field in the buttons "Menu" (on the left) and "System" (on the right). The application toolbar elements are then displayed to the right. Instead of symbols, the system displays the text description. If there is insufficient space to display all buttons, you can display the other elements by choosing the "More" button to the right of the screen.
Exceptions:
In Release 6.40 (NetWeaver 2004) , the new design is only available for the Internet Explorer. As of Release 7.00 (NetWeaver 2004s), it is also available for Firefox and Mozilla Browser. For this reason, the Enjoy design continues to be supported for Mozilla and Firefox in Release 6.40 (but only for these browsers, and even then only for this design, and not Tradeshow).
Furthermore, in Release 6.40, there are some Internet Application Components (that is, Web applications that build on the ITS), which continue to be displayed with the "Enjoy" design. Of course, the "Enjoy" design continues to be supported for these applications.
You can use SITSPMON Transaction to monitor the integrated ITS.
Thanks,
Tanuj

Problem in gui of ITS transaction

hi everyone
My problem is that on executing a transaction ie bmbc via r/3 system gives one output ie it lists the batches whereas if i see the same transaction via ITS in the SICF transaction>sap>gui>its (test services) the navigation area takes most of the screen is there a way to set the screen size such that it is similar to the one generated in the r/3 system output.
points will be awarded
thanks & regards
Jaspreet Kaur

Hello Jaspreet,
this seems to be a bug in the ITS/webgui. I just saw this...
I recommend to create an OSS trouble ticket.
best regards
Tobias
P.S.: Please write my name as a possible processor into
the ticket, this is definitely a development problem.
Message was edited by:
Tobias Gomer

XML Data Source Problem

Hi there,
I am creating a data source for XML....
all needed services are there (/SICF)
Web service was created..and it is active
I create DataSource..and I check it.... everything is Ok until here..
By activating the DataSource I got an error
Error generating web service..
what could be the problem ? or how could I know more about the problem...I do not get more than that message...
I will thank any help or advice
FedeX

Hi there,
I am creating a data source for XML....
all needed services are there (/SICF)
Web service was created..and it is active
I create DataSource..and I check it.... everything is Ok until here..
By activating the DataSource I got an error
Error generating web service..
what could be the problem ? or how could I know more about the problem...I do not get more than that message...
I will thank any help or advice
FedeX

SSO, ECC 5.0 vs EP 6.0 SP14, problem with ITS, ESS, WebDynpro, etc

Hi
I have the problem of connection the ECC 5.0 with EP 6.0.
I have to Implementation EP on ESS.
I do not know what the address and number of port the ITS because my ECC is on WAS 6.40 and the ITS is already probably on solid integrated in WAS on which the ECC is.
I do not know what to write in EP in moment when creature system to R/3. There is registration 'ITS Host Name & ITS patch', I do not know what I have to write there where this put in is R/3?
What do transactions serve ITS? How do I have activate ITS?
I ask about dispatch me message on these subject, they can be this links or theses' concrete steps what I have to make.
What is it this PCUI_GP ? - I have this to install and where from I have this to pull down?
I ask to forgive my weak English.
I am from Poland, I am the young consultant the SAP and a lot of oneself I teach yet.
Thank for all every showed help!
Best regards,
Bogdan
PS: please send me info to
[email protected]
here parameters of my systems:
SAP ERP Central Component 5.0
SAP_ABA 640 0012 SAPKA64012 Cross-Application Component
SAP_BASIS 640 0012 SAPKB64012 SAP Basis Component
ST-PI 003C_640 0001 SAPKITLPS1 SAP Solution Tools Plug-In (ST-PI 003C_6
PI_BASIS 2004_1_640 0006 SAPKIPYI66 Basis Plug-In (PI_BASIS) 2004_1_640
SAP_BW 350 0012 SAPKW35012 SAP_BW 350
SAP_APPL 500 0005 SAPKH50005 Logistics and Accounting
SAP_HR 500 0012 SAPKE50012 Human Resources
PI 2004_1_500 0004 SAPKIPZI64 PI 2003_1_470 : Add-On Delta Upgrade
EA-IPPE 300 0004 SAPKGPIC04 EA-IPPE 300: Add-On Installation
EA-RETAIL 500 0005 SAPKGPRC05 SAP R/3 Enterprise Retail
EA-GLTRADE 500 0005 SAPKGPGC05 SAP R/3 Enterprise Global Trade
EA-FINSERV 500 0005 SAPKGPFC05 SAP R/3 Enterprise Financial Services
EA-PS 500 0005 SAPKGPPC05 SAP R/3 Enterprise Public Services
EA-DFPS 500 0005 SAPKGPDC05 SAP R/3 ENTERPRISE DFPS
EA-HR 500 0005 SAPKGPHC05 SAP R/3 Enterprise HR Extension
EA-APPL 500 0005 SAPKGPAC05 SAP R/3 Enterprise PLM, SCM, Financials
ERECRUIT 300 0008 SAPK-30008INERECRUIT ERECRUIT 300: Add-On Installation
HR-CEE 106_500 0011 SAPK-10611INHRCEE HUMAN RESOURCES (HR) COUNTRY VERSION FOR
LSOFE 300 0000 - LSOFE 300 : Add-On Installation
Database system ORACLE
Release 9.2.0.4.0
EP 6.0 SP14
System PT1 Message Server
Host: plsapa4
Port: 3601
Enqueue Server
Host: plsapa4
Port: 3201
Database
Name: PT1
Host: plsapa4
Type: Oracle (Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.4.0 - Production)
Software Components
sap.com/SAP-JEECOR 6.40 SP14 (1000.6.40.14.0.20050921043441) 20051107164227
sap.com/SAP-JEE 6.40 SP14 (1000.6.40.14.0.20050921043604) 20051107164241
System Number PT1
Portal_ORA 327
J2EE-Engine_ORA 327
Instance JC00 All processes running
Host: plsapa4
OS: Windows 2003 (x86) 5.2
dispatcher Running
PID: 4468
Name: Java HotSpot(TM) Server VM
Vendor: Sun Microsystems Inc.
Version: 1.4.2_08-b03
Cluster
Node ID: 3541100
Kernel Version: 6.40 PatchLevel 98256.313
HTTP Port: 50000
HTTPS Port:
P4 Port: 50004
Telnet Port: 50008
server0 Running
VM
PID: 2820
Name: Java HotSpot(TM) Server VM
Vendor: Sun Microsystems Inc.
Version: 1.4.2_08-b03
Cluster
Node ID: 3541150
Kernel Version: 6.40 PatchLevel 98256.313
SDM Running
VM
PID: 5492
SDM Port: 50018

Hi Bharathwaj R!
I make test in SICF on ITS ang I get result:
<a href="http://plsapa2:8000/sap/public/bc/its?sap-client=100">http://plsapa2:8000/sap/public/bc/its?sap-client=100</a>
Service cannot be reached
What has happened?
URL http://plsapa2:8000/sap/public/bc/its call was terminated because the corresponding service is not available.
Note
The termination occurred in system RT1 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:L-i:plsapa2_RT1_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
I don't know why my ITS is "Service cannot be reached"

Problem in SICF

Similar Messages

Maybe you are looking for