Problem in Stacked chart Reports

Hi,
I was trying to create a report of Stacked Chart type. I was able to create it successfully But I still face these problems.
1. When I group the data based on an attribute of type Date, The date format appears (at the bottom of Stacks) like 2009,Jan,Day20 (if the date is 20th jan2009).I have tried to change the value format of date in the Value format Tab. But What ever is the format I choose, the date still gets displayed as 2009,Jan,day20. Please advise..
2. The second Issue is that when ever there are no records for a stack I can see the value displayed as 0.0. This really does not seem good on the report. Please let me know the steps to be followed to avoid this problem.
You can see a screenshot of the above problems *here*.
Thanks,
Raj Kumar

Hi all,
I am facing a problem in printing Crystal Reports in Windows Forms app. Normal application flow is working like charm but I want to handle the situation when printer is not available or is not ready for printing. I was looking for WMI but I am facing problem
like mentioned
here, that my printer always return Status 3 or State 0 (idle). Now Now I am looking for exceptions of PrinttoPrinter method of Crystal Reports but yet no luck. Any idea will be appreciated.
Thank in advance
For issues concerning third party products you should contact the vendor of the product for support. Which would be
SAP for Crystal Reports.
Also you say WMI apparently says your printer is idle. I don't know if that means your printer is available or not.
Can other programs print to that printer? If so then it is available. If Crystal Reports can not print to it even though it is available then SAP would be the place to try to get an answer.
La vida loca

Similar Messages

WebI Horizontal stacked chart formatting issue

I have created a stack chart report and I have labels defined in the X - axis. We have the issue with the gap between the X - axis line and the labels. We would like to know if we can reduce this gap between the axis line and the labels. I have attached the sample image below for your reference.
Edited by: Madan Chellu on Aug 31, 2009 11:51 PM

Not really. I need to have stacked bars grouped. For example, assume you had survey results. For question 1, you had a bar with 20 disagrees, 5 neutrals, and 50 agrees. For question 2, a bar with 10 disagrees, 2 neutrals and 30 agrees, and so on for say 10 questions. This would be your stacked bar chart. Now, say you had information spanning a number of years, 2008, 2009, 2010. What I want is a group of stacked bars (3 one for each year) for Q1, then 3 more stacked bars for Q2 and so on.
This is a combination of the grouped and the stacked bar charts.

Chart - problem with stack

Hello,
Ive got 3 problems with stack plots:
1. In the legend, the first value of table is the last one, why?
2. Always when i remove one value(in this case i turn off button), the last chart is remove
3. When I turn off the second button(rest is on), the plot name in legend is doubled.
Does anyone have an idea what i can do with this?
thanks for any answers.
Solved!
Go to Solution.
Attachments:
Desktop.zip ‏24 KB

Well, you simply need to code it differently.
Try this:
LabVIEW Champion . Do more with less code and in less time .
Attachments:
top-levelMOD2.vi ‏13 KB

Problems On Show Chart Legend in Crystal Report Java Viewer

Hi all,
We found the problem on show chart legend values of each column, i have already set the "Tool tip text " option by formart chart, but the ouput on java viewer on can show first column data. seem Java view not support for display Tool Tip by chart columns ?
Thanks
Andrew

i missed the following line in my code.
rcDoc.DataDefController.FormulaFieldController.Add(oFormulaField);
now it works......
my next issue is that,
chart returns True & False captions. but i want to show actual value. how its to be done
regards,
Padmanaban V

Stacked Charts in FR

Hi
I am doing a stacked report in FR and came across a quirk that i didn't know how to solve
I am retrieving some calculated values which should all add to 100%. The problem that i am having is that when i do a stacked chart, instead of showing each increments value (i have "show point values" ticked) it's giving me the what looks like a running total.
So instead of it showing 20, 20,30 etc it's showing, 20, 40, 70.
Anyone has any idea of how to get around this?
Thanks
G

Hi,
yup.. the base is the stacked bar chart and i can show as many as lines on top of it..currently i have only one.
So is that mandatory to create a line chart if i want a line on the stacked bars in CR2008.
Can u explain me if i have to go with line chart on top of the stacked bars to get the solution for this?
Regards,
Nanda Kishore.

Problem with running bitmap report in Oracle 6i

Hello,
I am running a report from a form using run_product in client/server enviroment. And I use the same code in all forms that run reports. In test enviroment, everything works normally. But in customer enviroment there is weird behaviour. Some reports need a lot of time to be executed, and when they are finally finished, report previewer is not maximized as it is in test enviroment. And more important problem is that one report doesn't execute at all. Report background engine is started but report doesn't come out at all.
Here is code which I use to run reports:
declare
izvestaj      varchar2(15);
pListName varchar2(20) := 'parList';
dt      varchar2(6) := 'Screen';
pList      paramlist;
BEGIN
izvestaj := 'EBS12';
begin
pList := get_parameter_list(pListName);
if not id_null(pList) then
destroy_parameter_list(pList);
end if;
pList := create_parameter_list(pListName);
if (not id_null(pList)) then
add_parameter(pList, 'P_PREDUZECE', text_parameter, to_char(:kontrolni.preduzece_id));
add_parameter(pList, 'P_PRENOS', text_parameter, to_char(:prenos.id));
add_parameter(pList, 'P_RAD', text_parameter, :prenos.chk_radnik);
add_parameter(pList, 'P_LOK', text_parameter, :prenos.chk_lokacija);
add_parameter(pList, 'P_ZAR', text_parameter, :prenos.chk_isplata);
add_parameter(pList, 'P_RAS', text_parameter, :prenos.chk_raspored);
add_parameter(pList, 'P_NAL', text_parameter, :prenos.chk_nalet);
add_parameter(pList, 'P_BEZ_RAS', text_parameter, :prenos.bez_rasporeda);
add_parameter(pList, 'P_STATUS', text_parameter, to_char(:prenos.status));
add_parameter(pList, 'P_RAD_ID', text_parameter, to_char(:prenos.radnik_id));
add_parameter(pList, 'P_SORT', text_parameter, to_char(:prenos.redosled));
add_parameter(pList, 'PARAMFORM', text_parameter,'NO');
add_parameter(pList,'DESTYPE',text_parameter,dt);
run_product(reports, izvestaj, synchronous, runtime, filesystem, pList, null);
end if;
exception
when others then
set_alert_property('cfg_error',alert_message_text,'Poziv izveštaja nije uspeo! '||sqlerrm);
if (alert_button1=show_alert('cfg_error')) then null;
end if;
raise form_trigger_failure;
end;
END;
Is it maybe some enviroment settings problem and if yes, what should I pay attention on?
Tnx in advance,
Nati

Hello,
When you put a block on a "new stacked canvas" that canvas is generated as a popup canvas. If that popup overlaps with some other generated items (for instance: items in master block) Forms will not show it.
You can try showing that popup canvas programatically with Show_View('canvas_name') in When-New-Form-Instance and see what happens.
Dalibor
P.S. Why do you have to put detail block on a popup canvas? Why don't you simply put it on a "same content canvas"?

Stacked Column Report bug when one series has zero for data

Hi,
I'm encountering an issue with the stacked charts. In my chart, I want to show the total of active and expired records for each year. I created a series for each, and the SQL for them is below:
Active (1st series created):
select '' link,to_char(preparedate,'YYYY') label,count(*) Active
from cts.contract
where preparedate is not null and
to_char(preparedate,'YYYY')>to_char(sysdate,'YYYY')-10
and expired = 0
group by '',to_char(preparedate,'YYYY')
order by '',to_char(preparedate,'YYYY')
Expired (2nd series):
select '' link,to_char(preparedate,'YYYY') label,count(*) Expired
from cts.contract
where preparedate is not null and
to_char(preparedate,'YYYY')>to_char(sysdate,'YYYY')-10
and expired = 1
group by '',to_char(preparedate,'YYYY')
order by '',to_char(preparedate,'YYYY')
When I see the chart output, I expect the chart to show the stacked columns with expired stacked on top of active, and ordered by year. However, for the two years in our database where there are no active (series 1) records, only expired (series 2) ones, these bars are displayed to the right of the other years. Oddly, for the year where all records are active, and none are expired, there is a sliver at the top of the bar for that year showing as the color for expired, and hovering over that portion of the bar displays zero. I understand that with the other two years where the series with zero would be stacked on the bottom, and therefore not visible, but why does the chart put these years after the other ones that are in order? Since my records are from 1998-2007, and the two years without series 1 records (active) are 1999 and 2002, the years are shown in this order: 1998, 2000, 2001, 2003, 2004, 2005, 2006, 2007, 1999, 2002.
Any help with how to make these two years show in the correct order with the others is appreciated.
Thanks,
Brian

After switching from Thin driver to OCI the problem went away.

Problem with simple chart

Hi everyone. I've got a problem with ABAP charts. I need to place a simple chart in screen's container.
REPORT ZWOP_TEST4 .
Contain the constants for the graph type
TYPE-POOLS: GFW.
DATA: VALUES       TYPE TABLE OF GPRVAL WITH HEADER LINE.
DATA: COLUMN_TEXTS TYPE TABLE OF GPRTXT WITH HEADER LINE.
DATA: ok_code LIKE sy-ucomm.
DATA: my_container TYPE REF TO cl_gui_custom_container.
REFRESH VALUES.
REFRESH COLUMN_TEXTS.
VALUES-ROWTXT = 'Salary'.
VALUES-VAL1 = 50000.
VALUES-VAL2 = 51000.
APPEND VALUES.
VALUES-ROWTXT = 'Life cost'.
VALUES-VAL1 = 49000.
VALUES-VAL2 = 51200.
APPEND VALUES.
COLUMN_TEXTS-COLTXT = '2003'.
APPEND COLUMN_TEXTS.
COLUMN_TEXTS-COLTXT = '2004'.
APPEND COLUMN_TEXTS.
Call a chart into a standard container, this function could be used
for many different graphic types depending on the presentation_type
field :
gfw_prestype_lines
gfw_prestype_area
gfw_prestype_horizontal_bars
gfw_prestype_pie_chart
gfw_prestype_vertical_bars
gfw_prestype_time_axis
CALL SCREEN '1000'.
CALL FUNCTION 'GFW_PRES_SHOW'
    EXPORTING
      CONTAINER         = 'CONTAINER'    "A screen with an empty
                                        container must be defined
      PRESENTATION_TYPE = GFW_PRESTYPE_LINES
    TABLES
      VALUES            = VALUES
      COLUMN_TEXTS      = COLUMN_TEXTS
    EXCEPTIONS
      ERROR_OCCURRED    = 1
      OTHERS            = 2.
*&      Module STATUS_1000 OUTPUT
      text
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'GUI_1000'.
SET TITLEBAR 'xxx'.
IF my_container IS INITIAL.
    CREATE OBJECT my_container
      EXPORTING container_name = 'CONTAINER'.
ENDIF.
ENDMODULE.                 " STATUS_1000 OUTPUT
*&      Module USER_COMMAND_1000 INPUT
      text
MODULE USER_COMMAND_1000 INPUT.
ok_code = sy-ucomm.
CASE ok_code.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_1000 INPUT
I created a screen 1000 in SCREENPAINTER, named it 'CONTAINER'. Then I try to launch code above and nothing appears on the screen. Could You give me some tip?

Hi,
delete this lines:
IF my_container IS INITIAL.
CREATE OBJECT my_container
EXPORTING container_name = 'CONTAINER'.
ENDIF.
then it should work.
R

Unclean conversion of chart reports to html form

dear all,
i created some charts like pie, bar graphs. i want to convert
that chart reports to html form.
my problem is that after conversion of chart reports to html form,
whatever the part of chart is unclean, it's totally in block colour.
what to do to present that chart part in RGB colour format on
the web. please some one help me as it is urgently required.
i am using the reports buider 6i.
thanks in advance

Here 'part of chart is unclean' means: that a report contained
two parts one is normal )in the form of data) , 2nd one is graphical
representation(pie or bar graph which is imported from graphics
builder) of that dat.
The above quoted statement means that graphical representation
part is not clear.
i tried for the solution(Danny's suggestion). but it didn't workout.
could any one tell another solution?
TIA

Slant Chart Reporting

Hi All,
I have a problem in designing Query for my slant chart reports.
The reports consist of 2 type of value in 1 keyfigure, Plan and Actual, you can just determine if the data is actual if it is beyond the current month, otherwise the data is Plan.
the problem is:
How can color or shade the value beyond the current month?
Jan   Feb   Mar   Apr May   Jun   July   Aug
A        A        A        A       A        P        P         P
A     A     A     A    A     P     P      P
A     A     A     A    A     P     P      P
I need to shade or emphasize the A because this are Actuals.
Thank you very much in advance

Hi,
You can use expression to achieve that. In series group, set the group on expression to be:
=iif(Fields!<District>.Value is nothing, “State”, Fields!<District>.Value)
Also, set the label expression to be:
=iif(Fields!<District>.Value is nothing, “State”, Fields!<District>.Value)
Hope this helps.
Raymond

Vertical Stacked chart

Post Author: tacopscym
CA Forum: WebIntelligence Reporting
I am new to the business objects world. I have created a vertical stacked chart. I now need to sort the vertical stacks in a certain format (the one with the highest total in the graph need to be at the top). I am not being able to get to this. I can do this easily in Excel using a pivot table. Another issue I am having is that when the Y-axis values has no entries then I need an empty column displayed. Currently my X-axis has weeks and Y-axis has errors for the week. I am interested in displaying all the weeks (whether they have errors or no errors), by default it displays only weeks that have errors. Any help in this will be appreciated- Thanks.

I believe you are going to have to edit the XML, scroll to the bottom of the Chart Attributes page and select Yes for "Use Custom XML", then you will have to change the chart area x/y/width/height. (you can do the same for the legend as well)

Problem in Combo chart columns and line

I select chart type is combo in my vc model and select data series is columns and line.
I define 5 series in the chart.
once i deployed the model the output shows the columns are overwrite in stacked position.
eg:
series 1: 10%
series 2: 20%
series 3: 45%
series 4: 25%
series 5 is line type
but in the chart the only one column will display,its top value 45% and itself shows 10% and 20% in different color.Don't show the 25% value on that column.
How to display the chart columns in clustered type in combo chart.
thanks in advance
Aravind.S

Hi
When you select 'Combo Chart' you will not get options for 'Stacked or Clustered'. By default it will be 'Stacked' chart only. Combo charts are generally used for less number of data series. Normally these charts are best suitable for 2 Data series only.
Still in your case is there any reason to use 'Combo Chart'? Consider following points -
1. If you want to use this type of chart then selction of 'Columns + Line' will be difficult because it will treat only 'Last Data Series' as line & all others will be columns & what you said problem will appear.
2. Instead of that select 'Column + Lines', so that only first 'Data series' will be column & rest all will be 'Lines'. So that you will get better visibility in that graph.
I think this will help you, If you have nay problem let me know.
Regards
Sandeep

Chart report Condition fields and Data fields

Hi all,
i have tried chart report by adding two condion fields and one data field, the report is more meaning full in this scenario. the first condition field is taken as x-axis, the 2nd condition fields is taken as legend.
while adding more condition fields and data fields, i feel its not showing meaningfull data.
can anyone explain how the condition fields and data fileds are manipulated by crystal report.
i am using CR XI R2 Server.
Thanks
Padmanaban V

i am using Crystal Report XI R2 RAS Embedded in my server.
as we can add any number condition fields programatically using the method
ConditionField.Add(FieldObj), i would like to know how these fields are manipulated internally by the RAS server.
that means, what is the significance of condition fieldobject 1, condition fieldobject 2,condition fieldobject 3 etc...
if i add more than two condition fields , RAS Chart Report always returns 0 as legend value for all legends.
Thanks in advance
Regards,
Padmanaban V
Edited by: Padmanaban Viswanathan on Dec 22, 2008 9:53 AM

What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

Regarding Pages charts, when I try to 'build' a 3D chart all I get is little dots but not graphics. No problems with 2D charts though. Guess my question is "Help?"

Regarding Pages charts, when I try to 'build' a 3D chart all I get is little dots but not graphics. No problems with 2D charts though. Guess my question is "Help?"

Sorry for the delay getting back to this.
Thanks to Fruhulda and Peter for their comments regarding the refusal of Pages to let me make 3D charts.
In answer to the questions put to me in this regard :
1. Pages version : Pages '09 v.4.1 (923)
2. Mac O/S :          v.10.6.8
3. 3D chart :          Can't find a 'name', but upright bars with rounded corners ???
4. Moved apps :    Not that I'm aware of! All should be as installed off the disc.
5. A note :              I have been able to create these in the past - related to a SW update?
                      and ... can create these charts perfectly in Keynote (go figure).
Thanks to all.
CM

Problem in Stacked chart Reports

Similar Messages

Maybe you are looking for