Problem in testing UI add-on after login method changes

Dear All Experts/Gurus,
I have changed login method to a new one of a UI Add-on (because I just have SDK implementation version license). Using add-on identifier generator, I generate the add-on identifier string and put on the source code :
Public Sub GetApplication()
    Set oSboGuiApi = New SAPbouiCOM.SboGuiApi
    oSboGuiApi.Connect Command
    oSboGuiApi.AddonIdentifier = "4CC8B8ACE0273A61489738C94047855DE8768CDD37F64D4F11E82759A542BD545D5A6E4D50A39B9E9FB20FA944FF35C5B60FE779"
    Set SboApplication = oSboGuiApi.GetApplication
End Sub
After recompile it, I want to prove it by sending it to other friend's (work mate) PC/notebook with different license and hardware key. The error message when installing/starting the add-on is :
Runtime error '-7200 (ffffe3e0)':
Connection - Connection string doesn't match UI development work mode.
If the error happened, I just guessed that the login method change is success. I also read the SAP new license mechanism states that if the add-on is developed using SDK implementation version, it will only be able to install/use in the customer network PC and so on, ....etc.
The problem is that I am not fully sure if my guess is correct. I want to conduct some testing. I tried to request new temprary license with compatibility license is over within 2 days, but unsuccessful. Would you please to tell me if there is another way to prove/test that the add-on will be able to start after the compatibility license for add-on expires ?
I appreciate your answer so much. TIA
Rgds,

Hi Steve,
The AddOnIdentifier you obtain by selecting Development or Implementation options while creating the AddOnIdentifier depends on the license manager.
If you change the license manager to another machine or someone connected to a different license manager try to run your code you it will not work.
It is quite clear in the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13d67f3c-0e01-0010-eba2-cab13a5979c2">License Guide</a>:
Development License
This license is required for partners developing add-ons and the only license allowing distribution. In Development license, the license key is shared by all developers connected to the same License Service. The License Service allocates licenses on the basis of first-come, first-served.
Implementation License
This license is required for customers intending to develop small modifications or add-ons for their own use using only the UI API.
Add-ons developed under the Implementation license cannot run with a different License Service other than the one that was used for their development. The Implementation license does not allow
distribution to third-parties.
Regards
Trinidad

Similar Messages

Problem:Member is Read only Mode after login with other user

Dear,
I am facing problem to enter the data in member. i.e Read only. but same member is fine with login with admin user.
I also assign the security with write permission to user. but the only that member "X" is in read only mode..
Is task list can effect on that??? as i am also using task list. Becoz when i add another member that is not member of that hirechiary its fine.
I am working on hyperion version 11.1.2.1..
Regards,
AMSI

Thanks, Problem has been solved myself becoz when i add new member in the form as this form is already part of Planning Unit Hierarchy , that's why the newly added member in the form can't be write only till up to when u add this member into Planning Unit Hierarchy.
Regards,
AMSI

Problem in connecting to next page after login

i am facing a problem in searching that which method comes in connecting to a new jsp page in the coding of the servlet of login form...
and please tell me the code too that how to implement that method..
I'll be very thankful to yo all.....
in waiting for your answer. ABHISHEK PATEL.. +919407270599..

In the future, please post Servlet related questions at the Servlet forum.
javaDB2forums wrote:
i am facing a problem in searching that which method comes in connecting to a new jsp page in the coding of the servlet of login form...
and please tell me the code too that how to implement that method..Your question is really vague. Are you asking how to forward or redirect a request? If so, either use RequestDispather#forward() or HttpServletResponse#sendRedirect().
in waiting for your answer. ABHISHEK PATEL.. +919407270599..This isn´t a contact advertisement forum. This is a public discussion forum.

Can't add user after login with KDM

Hi,
I start kdm in rc.conf with reboot and login as user I setup Arch linux. It seems this user name is not admin and can't add other users.
I may miss sth to do before I start KDE. What should I do?
Thanks very much for help.
Mike

The issue is I can't see any users and groups existing by "users and groups" tool under systems of menu.
Even I can add new user (this means I am admin), I can't change anything under "Login manager"
What I should do first.

Stuck in "loop" or "hang" after login

Running a MacBook Pro with 10.5.4 and Filevault on (company policy, so turning it off isn't an option). Sometimes after I start up the computer I will get to the logon screen enter my password and the computer will hang. The background doesn't change to my user backgrounds and I need to do a hard reset.
I've tried disk repair, permissions repair, running fsck -fy in single user mode, amongst other things. Some other suggestions, like deleting preferences files don't work because FileVault is enabled.
Thoughts on other things to try?

I just had this problem and couldn't find a solution online, so for the record (I'm presuming it's too late for you) here is what worked for me.
First the symptom: upon booting I could get to the login screen with no issues. I could login to accounts that didn't have filevault enabled, but not the account with it (it would hang after login, never changing to my desktop background).
First workaround: Logged in as root and manually opened the username.sparsebundle file (under Users/.username), using the FileVault password. At this point I could see that all the files were intact, and access them. Then I got a warning from Sophos Antivirus that a file needed to be moved to the infected folder and I had to enter a password for it. After that, login worked fine. But after the next logout I had the same problem.
Final workaround: Turning off Sophos (not just the moving of files but also active scanning) solved the problem. Best guess is that Sophos is trying to move files before login and doesn't have the permission to move them to the right place but you can't see that it's needing that feedback so it just stalls indefinitely.
I note that another user with this problem also had Sophos installed (see topic "Can't login after enabling FileVault"). I only had the problem after transferring a bunch of old email to my machine (with windows viruses in some of the attachments). Of course these caused my mac no threat, but this combined with the need for a password for file movement triggered the weird behavior.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so much

Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help.

Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. after Office Updates.

I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
Here is a quick note from the event viewer:
The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1138
Start Time: 01d07dcede19c458
Termination Time: 15
Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Report Id:
Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
this add-in and check to see if an update is available. Do you want to disable this add-in?.
I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
someone could help me get to the root cause of the matter.
My environment is as follows:
Windows 7 x64 SP1
Office 2010 v 14.0.7128.5000
Adobe Reader MUI X and Adobe Acrobat X
Feroze

Hi,
As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
Or contact the support of Adobe and see if there is a known compatibility issue or not.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

TS3274 After upgrading to 5.1, I can not hear other's calling tone during the usage of Skype-to-Skype. But after touching the answer key, I still can hear other's sound. If I use earphone, the calling tone is audible. No problem of test call. What's goin

After upgrading my iPad 1 to OS 5.1, I got trouble to use Skype. I can not hear the calling tone from other during the usage of Skype-to-Skype. But when I touch the answer key, I still can hear other's voice and other also can hear my voice. If I use earphone, the calling tone from other is audible. There is also no problem of test call. What's going on with my iPad 1? I do hope someone can help me to fix this problem.

Hi,
I experienced similar behavior (neither Keychain Access nor Safari would start, Chrome cannot access https sites, etc.). It got fixed by following instructions in this article:
http://www.macworld.com/article/163227/2011/10/fix_a_lion_file_opening_hang_in_m ac_os_x_10_7_2.html which I found in this thread: http://att.macrumors.com/showthread.php?p=13625027#post13625027
Basically remove the ~/Library/Application Support/Ubiquity and restart. OSX will create a new one with the right permisions.
/cheers

I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating. I can get to the login screen but my mouse will be frozen. The only fix's is a hard reboot. Any help would be great!

I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating. I can get to the login screen but my mouse will be frozen. The only fix's is a hard reboot. Any help would be great!

Try resetting the SMC and the PRAM.
1. SMC
Read this and follow the instructions for your kind of mac:
http://support.apple.com/kb/HT3964
2. PRAM
Follow the procedure below:
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
command–option–P–R
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as it should normally.

Problems after login

My Mac started doing this a few weeks ago, where after login it all kind of collapses. Sometimes the desktop icons won't show up, or Hear (which runs on startup) will get stuck loading for a long time. Sometimes everything seems fine but no programs will launch, or the dock won't respond.
So far I've done an Onyx cleanup run, a Disk Verify and Repair, Permissions Verify and Repair and even did the good old Command+R on startup and reinstalled Lion. It worked the first time and then it went back to its old antics.
Any ideas? I'm afraid if its a corrupted file and even if I get a new Mac (this one has gone through all kinds of things, including getting catapulted out of my backpack into the street in Hungary) then when I restore from Time Machine it'll carry over.
Thanks

If a new user solved the issue, then you either have too many apps starting up at login and/or at least one which puts problems. In order to see what you have there go to system preferences/users and groups/you/login items, you must have a short list, as attached.
If not too many here, then you may have a corrupt system.

[svn] 1142: Add a manual test for BLZ-118 where login through ChannelSet sends an empty destination ID at cluster_request operation .

Revision: 1142
Author: [email protected]
Date: 2008-04-08 08:30:31 -0700 (Tue, 08 Apr 2008)
Log Message:
Add a manual test for BLZ-118 where login through ChannelSet sends an empty destination ID at cluster_request operation.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-118
Added Paths:
blazeds/trunk/qa/apps/qa-manual/clustering/
blazeds/trunk/qa/apps/qa-manual/clustering/ClusteredChannelSetLoginTest.mxml

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Menu tabs disappear completely after login and appears if only i press on item node at hire level

I'm using a Menu Model to Create a Page Hierarchy in my adf application on Jdeveloper 11.1.2.3.0
it is in three levels level 1 have 2 item nods (home - Help) displayed as buttons
                            level 2   contains 5 item nods about the managements displayed as tabs
                            level 3   is about reports displayed as list
the point I have apply security in the application using Adf security wizard and i assign roles and users and grants
all works fine but level 2 tabs disappear completely after login and appears if only i press on Home item node at run time
I create 2 users (admin) has all roles and can view all tabs in level 2 of my navigation and another user (emp) which can view one Tab page in level 2
Point 1 --the item nod are rendered according the #{securityContext.regionViewable['oracle.view.pageDefs.RentManagPageDef']}     (EL ) expression language
and other item nod render property are set as the same but in the page name definition
it works fine
_ Point 2 in my page template I set #{menuInfo.rendered} for renderd property of the command navigation item
it works fine
- point 3 I add a go link in my template to explicit perform log in log out from the app and redirect the user to the required page
Destination is
#{securityContext.authenticated ? "/adfAuthentication?logout=true&end_url=/faces/wearhouse.jsf" : "/adfAuthentication?success_url=/faces/company.jsf"}
and its also works fine
the problem is in the level 2 navigation tabs which is diaper after explicit log in the app directs the user to the correct page successfully
But the tabs are not rendered till I press on home button on Level 1 navigation it appears and it appears correctly cording the logged in user validation
in another words i log in as user (admin) i get directed to the successful log in page in the link go but level 2 tabs are invisible or not rendered at all    I click on Home button in level1 navigation the tabs
become rendered or viewable and i navigate normally
I log out as admin the level 2 tabs becomes invisible again
then I log in as (emp) i get directed to the successful log in page and level 2 tabs are still invisible or not rendered
I click on Home button in level1 navigation the only one tab the user emp authorized to it gets rendered (appears)
and its semi correct behavior because this is what I want him to see only
my tries to find solution
I tride to use
#{securityContext.userInRole['division']}
on the menu node item   I found same behavior level 2 tabs gets hidden till i click on home link at run time
I tride to use #{securityContext.authenticated} to control item nods rending
all tabs remains visible and i dont want that ain adition if user clicks on a tab of page he has no authority on it i recive server error
I read 30.7 Creating a Login Page in the Fusion Developer's Guide for Oracle Application Development Framework to finde about redirecting user
and it is using the same as i did from adf tutorials
I tried to make new navigation app on fast
maybe i made incorrect change in any stage of my original app
but I found same behavior
I tried to set disabled property instead of rendered property the tabs are always rendered   but I got server error when I click on a tab which a user does not authorized
So I doubt maybe problem in the El or the way I use to control rendering item node
or there additional step to stop all the tabs disappear after login
I hope please some one Help or tell me what i have to read about in the developer guide or interface developer guide or article on the web
I'll be gratfule
I know maybe it is small issue but help me please

Hi,
have a look at the sample that comes with this article: Oracle ADF: Security for Everyone It uses resource remissions to authorize panel tabs.
One test to run is to print the outcome of the security evaluation (e.g. output text) to see what it returns.
Frank

Problem with ADF Security / SQL Authenticator after upgrade to 11.1.1.6

Hi,
We have an ADF application built with JDeveloper 11.1.1.2 that's been in production for a couple of years. Now we are in the process of upgrading to 11.1.1.6 so I have upgraded WLS and ADF in a test environment and re-deployed the application there. The application uses users and groups from database using SQL Authenticator configured in WLS. This worked fine in the old version but now after the upgrade we can't log in with credentials from the database. I can log in if I add a user to the default authenticator. We didn't touch any of the authenticator settings or security realm configurations during the upgrade. Both authenticators are marked as SUFFICIENT, as they have always been.
Has something changed in the way SQL Authenticator is used since 11.1.1.2? What could be the problem?
Regards,
Joonas

Answering myself here: after recreating the SQL Authenticator and the ADF Security configuration logins are working again. Don't know where the problem was though.

Black screen after login and slow NAL

Hi,
We have a problem which we think is ZFD related. Immediately after the
login there is a black screen presented and the pc appears to be doing
nothing. After 30 seconds or up to 3 minutes the desktop appears. At
that moment the NAL starts and again we have to wait for 1 to 5 minutes
for the NAL to appear.
Here are some figures:
3300 users
700 applications
7 cluster servers
NetWare 6.5 sp5 + nw65sp5upd1 + iscsi65sp5a
GroupWise 7.0 sp1
ZenWorks for Desktops 7.0 sp1
(and iPrint, BorderManager 3.8, NetMail 3.5.2, Identity Manager 3.01)
Windows XP sp2 fully patched
Office 2003
Novell Client 4.91 sp2 + pkc
We are using DLU. The difference in the delay times is because of
hardware. On older hardware you'll have to wait longer. That makes sense
but keep in mind the oldest hardware is still a P4 1,6 with 256Mb RAM.
But 1 and a half minute extra startup time for a brand new pc is still
quite a lot.
We have had an expert at our site. The obvious like SLP, DNS was not our
problem. He took some traces and again no problems found. There are some
posts with ZFD 6.5 which mentions this black screen but no solution is
provided.
Most of our applications are associated with the users' container.
Anyone please?
Joost Sannen

Hi Craig,
We'll follow up your advice and let you know. Currently I'm at home with
the flew so you have to wait for it.
Thanks,
Joost Sannen
craig wilson schreef:
> The "startup" times you are seeing are not the norm and vastly different
> from what most people see.
>
> You need to take steps to see what is causing your delays.
>
> The first thing is to determine where the delay is occurring.
>
> Login as a user that belongs to ZERO policies. No DLU. No Group
> Policies on a PC that has NO workstation Policies. The Windows Account
> should already exist on the PC.
>
> This is your base-line.
>
> Then Add in DLU but no other policy. (Test Volatile vs Non-Volatile)
> W/O DLU, test using Windows Group Policies that you have assigned.
>
> For DLU, you need to minimize the Profile size.
> New users on a PC for me usually add a few seconds but not a lot.
>
> The difference here is less than 1 second in a Windows vs ZEN
> Environment for the creation of the account. The delay is in creating
> the account which is handled by Windows in the same manner in both cases.
>
> For your GPOs, make sure you are following best practice of only setting
> the required settings. Do not set a value that is equal to the default
> value. Each setting you change increases GPO policy processing time.
> Again, Windows not ZEN processes this and the delay would be the
> identical in both cases.
>
> -------------------------------------------------------------------
> NAL Startup Time - This can be a load of things.
>
> Turn of "Reading of Groups" as a test. This is often a big cause of
> delay. You need to test how much of a delay this is causing.
>
> Do you have a large number of apps assigned to the user (by any fashion)
> with lots system requirements. Realize that if a user has 700 apps
> assigned to him but they only appear if they meet a complex set of rules
> this will cause delays.
>
> Do you have a large number of "Force Run" apps running upon the Start of
> NAL? This can cause huge delaays.
>
> Again specific tests to help.
> ------------------------------------------------------------------------
> After logon, are you attached to any replica servers located across a
> slow WAN link? We may need to try and make sure we delay attaching to
> these servers during initialization.
>
>
>
>
>
>
>
>

Launch a software after login invisiblly

Hi, I have the software "Path Finder". I set it hidden after login. But if I click the desktop, it shows up a window. I tried the following test:
---If I use cmd+H to hide the window, when I click the desktop, it shows up the window (of Paht Finder)
---If I use cmd+W to close the window, when I click the desktop, it doesn't show up the window
When I wanna do is : When login, launch the software Path Finder invisiblly (no window shows up on the desktop anytime. And if possible, no icon shows up on dock . ) But the invisible situation must be similar to cmd+W, not cmd+H, because I don't wanna the window show up when I just click the desktop.
I have tried AppleScript such as : keystroke "w" or close window 2. But these doesn't work because when the window is hidden, the above command have no effect on that window.
I am not sure if there is a solution by using Applescript. But I have some software, like Quickeys 4 can do this thing, namely launching quickeys after login automatically and no Quickeys window show up, only a menu icon at top-left of screen. (Set Preferences in Quickeys).

The following script will activate PathFinder so that it unhides. Then it will close the frontmost window. You can have this run at login.
delay 2 --number of seconds to wait. increase this number until you're sure that
--PathFinder will be fully open before proceeding
tell application "PathFinder" to activate
delay 0 --number of seconds to wait. add .5 or so here if you have problems
tell application "System Events"
keystroke "w" using command down
end tell
Good luck,
-Nate

Problem in testing UI add-on after login method changes

Similar Messages

Maybe you are looking for